Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ku-Band”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Payload Performance of TDRS KL and Future Services

NASA has accepted two of the 3nd generation Tracking and Data Relay Satellites, TDRS K, L, and M, designed and built by Boeing Defense, Space Security (DSS). TDRS K, L, and M provide S-band Multiple Access (MA) service and S-band, Ku-band and Ka-band Single Access (SA) services to near Earth orbiting satellites. The TDRS KLM satellites offer improved services relative to the 1st generation TDRS spacecraft, such as: an enhanced MA service featuring increased EIRPs and GT; and Ka-band SA capability which provides a 225 and 650 MHz return service (customer-to-TDRS direction) bandwidth and a 50 MHz forward service (TDRS-to-customer direction) bandwidth. MA services are provided through a 15 element forward phased array that forms up to two beams with onboard active beamforming and a 32 element return phased array supported by ground-based beamforming. SA services are provided through two 4.6m tri-band reflector antennas which support program track pointing and autotrack pointing. Prior to NASAs acceptance of the satellites, payload on-orbit testing was performed on each satellite to determine on-orbit compliance with design requirements. Performance parameters evaluated include: EIRP, GT, antenna gain patterns, SA antenna autotrack performance, and radiometric tracking performance. On-orbit antenna calibration and pointing optimization was also performed on the MA and SA antennas including 24 hour duration tests to characterize and calibrate out diurnal effects. Bit-Error-Rate (BER) tests were performed to evaluate the end-to-end link BER performance of service through a TDRS K and L spacecraft. The TDRS M is planned to be launched in August 2017. This paper summarizes the results of the TDRS KL communications payload on-orbit performance verification and end-to-end service characterization and compares the results with the performance of the 2nd generation TDRS J. The paper also provides a high-level overview of an optical communications application that will augment the data rates supported by the Space Network.

Laser↗

A Comparison of Radio Frequency Interference Within and Outside of Allocated Passive Earth Exploration Bands at 10.65 Ghz and 18.7 Ghz Using the GPM Microwave Imager and Windsat

Radio Frequency Interference (RFI) for Microwave Imagers has been increasing over time for L-band, C-Band, X-Band, Ku-Band The GPM constellation of radiometers provides a unique dataset that we can use to survey the RFI environment RFI at 10 GHz has been increasing over the last 2 decades. -Wider bandwidths (like WindSat), outside of the 10.6 to 10.7 GHz allocated band, don't provide substantial RFI rejection over land -The major advantage of remaining within the allocated band at 10.6 to 10.7 GHz is the reduction in reflected RFI around Europe -RFI at 19.3 GHz doesn't exhibit the reflections around the US that are observed within the allocated band at 18.6-18.8 Ghz.

microwave imager↗

Conformal Lightweight Antenna Structures for Aeronautical Communication Technologies

This project is to develop antennas which enable beyond line of sight (BLOS) command and control for UAVs (Unmanned Aerial Vehicles). We will take advantage of newly assigned provisional Ku-band spectrum for UAVs and use unique antenna designs to avoid interference with ground systems. This will involve designing antennas with high isotropic effective radiated power (EIRP) and ultra-low sidelobes. The antennas will be made with polymer aerogel as a substrate to both reduce weight and improve performance, as demonstrated in an Aero Seedling. In addition, designing the antennas to be conformal to the aircraft fuselage will reduce drag.

aerogels↗

Estimating a Large Phased Array Antenna Radiation Pattern by Computer Electromagnetic Simulation

The design of a conformal antenna for use on UAV's (Unmanned Aerial Vehicle) and other aircraft can be enhanced with computational electromagnetic modeling to determine the expected radiation patterns of the antenna when mounted on the aircraft. However, detailed simulation of the antenna structure and the aircraft together requires significant computational resources and time which may not be available. This paper details several methods for estimating the radiation pattern of a 50 by 50-element patch antenna. The Conformal Lightweight Antenna Structures for Aeronautical Communication Technologies (CLASACT) Program aims to build and test a 14.25 gigaherz (Ku-band) conformal antenna on a NASA-owned UAV. The antenna is intended for satellite communications and will enable communication between a ground station and a UAV when the separation distance is too great for line-of-sight communication. It is estimated that a 2 degree beamwidth will be necessary, requiring a 50 by 50 array of patch elements. The narrow beamwidth requirement, together with an element spacing of 0.6 lambda means that the array length will be 30 wavelengths, electrically very large. Three methods of varying complexity are described for estimating the total far-field radiation pattern. The results are shown for each method in the form of a normalized power pattern.

Mackenzie, Anne I.↗

TRMM Version 8 Reprocessing Improvements and Incorporation into the GPM Data Suite

The National Aeronautics and Space Administration (NASA) has always included data reprocessing as a major component of every science mission. A final reprocessing is typically a part of mission closeout (known as phase F).The Tropical Rainfall Measuring Mission (TRMM) is currently in phase F, and NASA is preparing for the last reprocessing of all the TRMM precipitation data as part of the closeout. This reprocessing includes improvements in calibration of both the TRMM Microwave Imager (TMI) and the TRMM Precipitation Radar (PR). An initial step in the version 8 reprocessing is the improvement of geolocation. The PR calibration is being updated by the Japan Aerospace Exploration Agency (JAXA) using data collected as part of the calibration of the Dual-Frequency Precipitation Radar (DPR) on the Global Precipitation Measurement (GPM) Core Observatory. JAXA undertook a major effort to ensure TRMM PR and GPM Ku-band calibration is consistent. A major component of the TRMM version 8 reprocessing is to create consistent retrievals with the GPM version 05 (V05) retrievals. To this end, the TRMM version 8 reprocessing uses retrieval algorithms based on the GPM V05 algorithms. This approach ensures consistent retrievals from December 1997 (the beginning of TRMM) through the current ongoing GPM retrievals. An outcome of this reprocessing is the incorporation of TRMM data products into the GPM data suite. Incorporation also means that GPM file naming conventions and reprocessed TRMM data carry the V05 data product version. This paper describes the TRMM version 8 reprocessing, focusing on the improvements in TMI level 1 products.

Stocker, E. F.↗

Path Attenuation Estimates for the DPR

The algorithm for the Surface Reference Technique (SRT) has been updated from version V6A to version V6X. The modified algorithm is designed to process dual-frequency radar data which are now available over the full swath. Comparisons between V6A and V6X show that the dual-wavelength version of the SRT (DSRT) eliminates some of the overestimates of path attenuation in the outer swath that occurred in the earlier version of the algorithm when dual-frequency data was unavailable in the outer swath. However, the DSRT is not reliable in cases of light rain rates where only the Ku-band channel detects rain, nor is it reliable in high rain rate cases where the Ka-band surface signal is lost through attenuation. A modified hybrid algorithm is planned for version 7 that can combine the best features of single- and dual-frequency path attenuation methods.

Meneghini, Robert↗

Conformal Lightweight Antenna Structures for Aeronautical Communication Technologies

This project developed an antenna to enable beyond line of sight (BLOS) command and control for small UAVs. We took advantage of a newly assigned provisional Ku-band spectrum for UAVs and used unique antenna design to avoid interference with ground systems. This required the design of an antenna with high isotropic effective radiated power (EIRP) and ultra-low sidelobes. The antenna was made with polymer aerogel as a substrate to both reduce weight and improve performance, as demonstrated in an Aero Seedling. In addition, designing the antennas to be conformal to the aircraft fuselage will reduce drag.

polyimide↗

Antenna and Flight Control Software for Conformal Phased Array Antenna Design (CPAAD)

The National Aeronautics and Space Administration (NASA) is developing lightweight conformal phased array antenna designs (CPAAD) for beyond line of sight communications [1]. The CPAAD system is developed to address reliable and affordable autonomous next generation aviation systems. The technology takes advantage of newly assigned provisional Ku-bands for UAVs. The antenna design is unique to avoid interference with the ground and the unconventional substrate reduces weight. The surface mounted conformal design allows for reduced drag during flight. The software developed for the CPAAD system operates the antenna hardware and provides a graphic user interface (GUI) for ground testing and flight operations.

phased array antenna control software↗

Results of Airborne Backscatter Measurements During the Surface Wave Dynamics Experiment

Ocean backscatter data over a wide variety of oceanic and atmospheric conditions were obtained by the Jet Propulsion Laboratory NUSCAT Ku-band scatterometer during the Surface Wave Dynamics Experiment (SWADE). Thirty hours of backscatter data were collected in ten flights by NUSCAT on the NASA Ames C130 aircraft during an intensive observation period (IOP) of SWADE in the winter of 1991. The SWADE experimental area, off the coast of Virginia and Maryland, was deployed with an array of buoys providing appropriate in-situ measurements to correlate with the radar backscatter for incidence angles from 10ø to 60ø at both horizontal and vertical polarizations.

Airborne↗

Design of Dual Frequency Interferometric SAR

Using a spaceborne interferometric SAR, it is possible to produce a high resolution global topographic map with a height accuracy of several meters. However, frequency selection of the interferometric SAR is rather complicated due to interferometric phenomenology and atmospheric effects. In this paper, we propose a dual frequency interferometric SAR to achieve better understanding of interferometric height (especially for penetrable medium) and corresponding calibration and to remove the atmospheric effects. The selected frequencies are L- and Ku-bands. We also present a radar design and show that a light weight and efficient SAR can be designed using new technologies and dual frequency advantages even with two frequency radars in a single spacecraft.

Interferometric↗

Arctic Sea Ice Extent and Melt Onset from NSCAT Observations

Arctic sea ice extent and the timing of melt onset are important parameters in the study of polar processes and climate changes. NSCAT Ku-band active microwave observations of the Arctic sea ice cover are described in this article with emphasis on their potential use for estimating ice extent and detection of spring melt.

Arctic↗

Optimal Estimation of Rain Rate Profiles from Single-Frequency Radar Echoes

It is well-documented (Hitschfeld and Bordan 1954, Meneghini 1978, Haddad et al 1993) that there are significant ambiguites inherent in the determination of a particular vertical rain intensity profile from a given time profile of radar echo powers measured by a downward-looking (spaceborne or airborne) radar at a single attenuating frequency.

stochastic constraints Ku-band Precipitation Radar↗

Imagin Ice Sheet Change Using Scatterometers

Though designed to measure vector ocean winds, new imaging techniques facilitate the use of spaceborne scatterometer data in climate change studies of polar ice sheets.

NASA Ku-band Scatterometer (NSCAT)↗

Design of a large dual polarized Ku band reflectarray for space borne radar altimeter

We describe the design of a large dual-beam, dual polarized reflectarray designed for a space-based radar altimeter. This application requires a 2.16 X 0.35 m aperture that can be folded for launch stowage. Low mass and >50% efficiency are also required. A reflectarray antenna offers the best approach but also presents unique technical challenges since a reflectarry has never been used in a space based radar application. In what follows, we describe the design, analysis and measurements of a breadboard test array built to demonstrate the reflectarray concept.

dual↗