SEARCH · Search NASA

Results for “Multifunctionality”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

NASA NTRS1979

Focal plane transport assembly for the HEAO-B X-ray telescope

The High Energy Astronomy Observatory - Mission B (HEAO-B), an earth orbiting X-ray telescope facility capable of locating and imaging celestial X-ray sources within one second of arc in the celestial sphere, is considered. The Focal Plane Transport Assembly (FPTA) is one of the basic structural elements of the three thousand pound HEAO-B experiment payload. The FPTA is a multifunctional assembly which supports seven imaging X-ray detectors circumferentially about a central shaft and accurately positions any particular one into the focus of a high resolution mirror assembly. A drive system, position sensor, rotary coupler, and detent alignment system, all an integral part of the rotatable portion which in turn is supported by main bearings to the stationary focal plane housing are described.

Brissette, R.↗

NASA NTRS1978

Technology requirements for an orbital navigation/position finding system

The concept of an orbiting personal navigation system as a possible application for a large space structure is considered. The navigation system would have to be part of a large, integrated, multifunction Information Service Platform to justify its complexity and assured use by a large segment of the civilian population. The navigation configuration is a large cruciform which utilizes a linear phased array antenna design. The two antenna arms generate narrow, orthogonal beam patterns on the ground which are electrically scanned east to west and south to north. A passive ground receiver detecting the beam passage determines the user's position in earth longitude and latitude coordinates.

Lang, A. L., Jr.↗

NASA NTRS1980

Demonstration Advanced Avionics System (DAAS) functional description

A comprehensive set of general aviation avionics were defined for integration into an advanced hardware mechanization for demonstration in a Cessna 402B aircraft. Block diagrams are shown and system and computer architecture as well as significant hardware elements are described. The multifunction integrated data control center and electronic horizontal situation indicator are discussed. The functions that the DAAS will perform are examined. This function definition is the basis for the DAAS hardware and software design.

Source record↗

NASA NTRS1981

Support systems of the orbiting quarantine facility

The physical support systems, the personnel management structure, and the contingency systems necessary to permit the Orbiting Quarantine Facility (OQF) to function as an integrated system are described. The interactions between the subsystems within the preassembled modules are illustrated. The Power Module generates and distributes electrical power throughout each of the four modules, stabilizes the OQF's attitude, and dissipates heat generated throughout the system. The Habitation Module is a multifunctional structure designed to monitor and control all aspects of the system's activities. The Logistics Module stores the supplies needed for 30 days of operation and provides storage for waste materials generated during the mission. The Laboratory Module contains the equipment necessary for executing the protocol, as well as an independent life support system.

Source record↗

NASA NTRS1982

Application of multi-function display and control technology

The NASA orbiter spacecraft incorporates a complex array of systems, displays, and controls. The incorporation of discrete dedicated controls into a multifunction display and control system (MFDCS) offers the potential for savings in weight, power, panel space, and crew training time. Technology identified as applicable to a MFDCS is applied to the orbiter orbital maneuvering system (OMS) and the electrical power distribution and control system (EPDCS) to derive concepts for a MFDCS design. Several concepts of varying degrees of performance and complexity are discussed and a suggested concept for further development is presented in greater detail. Both the hardware and software aspects and the human factors considerations of the designs are included.

Spiger, R. J.↗

NASA NTRS1982

State-of-the-art cockpit design for the HH-65A helicopters

In the design of a HH-65A helicopter cockpit, advanced integrated electronics systems technology was employed to achieve several important goals for this multimission aircraft. They were: (1) integrated systems operation with consistent and simplified cockpit procedures; (2) mission-task-related cockpit displays and controls, and (3) reduced pilot instrument scan effort with excellent outside visibility. The integrated avionics system was implemented to depend heavily upon distributed but complementary processing, multiplex digital bus technology, and multifunction CRT controls and displays. This avionics system was completely flight tested and will soon enter operational service with the Coast Guard.

Castleberry, D. E.↗

NASA NTRS1981

An integrated control panel utilizing a programmable varistor-multiplexed dichroic liquid crystal display

Due to the conflicting demands of modern aircraft for increased systems/sensors and the decrease in cockpit panel size, weight, volume, and power, conventional discrete/dedicated methods of display and control are fast becoming obsolete. A means is sought to integrate the control and display into multifunctional programmable devices, thus giving the ability to increase system functions and yet conserve panel space. A potential solution to the control portion of the problem has come to be known as the Integrated Control Panel (ICP) approach. Flat panel display technology and controls using programmable flat panel displays with transparent capacitive touch control overlays offer the largest potential advantages. The flat panel display made of varistor-multiplexed dichroic liquid crystal (LCD) developed by GE in recent years appears to offer the ideal monochrome solution.

Whitton, I. J.↗

NASA NTRS1981

Advanced electronic displays and their potential in future transport aircraft

It is pointed out that electronic displays represent one of the keys to continued integration and improvement of the effectiveness of avionic systems in future transport aircraft. An employment of modern electronic display media and generation has become vital in connection with the increases in modes and functions of modern aircraft. Requirements for electronic systems of future transports are examined, and a description is provided of the tools which are available for cockpit integration, taking into account trends in information processing and presentation, trends in integrated display devices, and trends concerning input/output devices. Developments related to display media, display generation, and I/O devices are considered, giving attention to a comparison of CRT and flat-panel display technology, advanced HUD technology and multifunction controls. Integrated display formats are discussed along with integrated systems and cockpit configurations.

Hatfield, J. J.↗

NASA NTRS1983

Advanced technology exhaust nozzle development

The requirement for greater tactical aircraft operational capabilities has led to increasing research emphasis on the refinement of engine/airframe integration methods and exhaust nozzle flexibility. A major prospective advancement in the development of these capabilities takes the form of multifunctional exhaust nozzle systems with thrust reversal and thrust vectoring features, whose operation will be shared by both airframe and powerplant control systems. Attention is presently given to the two-dimensional convergent-divergent and single expansion ramp nozzle designs, with emphasis on the variable geometry mechanical systems by which they assume cruising flight, vectoring, and thrust reversal operations. The nozzles have been wind tunnel model-tested for the cases of the F-18 fighter and a supersonic cruise configuration concept.

Dusa, D. J.↗

NASA NTRS1983

Man's role in a remote orbital servicing system

The Remote Orbital Servicing System (ROSS), a focal point for NASA research in automation and robotics, is discussed in terms of the role of man in such a system. In the supervisory control mode, the ROSS operator inputs high-level goals to a strategic (nonreal-time) planner which then passes the plan or series of actions to a tactical (real-time) planner which executes the plan. Using directed control, man makes more specific commands to perform strategic planning with or without the use of the automated strategic planner. Shared computer/manual control will require a multifunction interactive display. At the teleoperator control level, a hand controller is used to command the ROSS manipulator and end effectors.

Pennington, J. E.↗

NASA NTRS1984

A research program in active control/aeroelasticity in the JIAFS at NASA Langley Research Center

A control law synthesis methodology for multifunctional active control system to satisfy root-mean-square load and response constraints as well as to meet stability robustness requirements at plant input and output was developed. Modern control theory, singular value analysis and optimization techniques were utilized. All stability and response derivative expressions were derived analytically for sensitivity study. The software is incorporated as an update to the AB/LAD general control design software package PADLOCS.

Whitesides, J. L.↗

NASA NTRS1984

Integrated cockpit design for the Army helicopter improvement program

The main Army Helicopter Improvement Program (AHIP) mission is to navigate precisely, locate targets accurately, communicate their position to other battlefield elements, and to designate them for laser guided weapons. The onboard navigation and mast-mounted sight (MMS) avionics enable accurate tracking of current aircraft position and subsequent target location. The AHIP crewstation development was based on extensive mission/task analysis, function allocation, total system design, and test and verification. The avionics requirements to meet the mission was limited by the existing aircraft structural and performance characteristics and resultant space, weight, and power restrictions. These limitations and night operations requirement led to the use of night vision goggles. The combination of these requirements and limitations dictated an integrated control/display approach using multifunction displays and controls.

Drennen, T.↗

NASA NTRS1984

On-orbit maintenance and repair - New era in space research and industrialization

During the seventies, NASA was developing a multifunction, economical spacecraft complete with ground and spaceborne support equipment, software, and necessary documentation to facilitate a large variety of space missions on a routine and cost effective basis. In order to reduce costs and time requirements, research was conducted to identify new approaches to a reusable, low-cost spacecraft design. The result of these studies was the development of the Multimission Modular Spacecraft (MMS). Three MMS spacecraft are currently operating in orbit. These spacecraft include the two Landsat-D earth resources satellites, Landsat-4 and -5, and the Solar Maximum Mission (SMM) spacecraft. Attention is given to details regarding the MMS, the STS-41C SMM repair mission, and failure modes and component degradation.

Cepollina, F.↗

NASA NTRS1985

Circular-to-rectangular transition ducts for high-aspect ratio nonaxisymmetric nozzles

The next generation fighter aircraft will be equipped with nonaxisymmetric multifunction jet engine exhaust systems. The circular-to-rectangular transition duct employed in these systems has been made longer with the objective to maintain uniform flow. The weight of the exhaust system increases with increasing nozzle aspect ratio. The new design is to provide enhanced maneuvering and STOL performance. It is attempted to reduce the increase in weight as much as possible by new design strategies. The present paper has the objective to show through experimental data that the current design guidelines for transition ducts can be expanded so that shorter transitions are possible thereby reducing the nonaxisymmetric exhaust system weight penalty.

Burley, J. R., II↗

NASA NTRS1986

Static internal performance of a thrust vectoring and reversing two-dimensional convergent-divergent nozzle with an aft flap

The static internal performance of a multifunction nozzle having some of the geometric characteristics of both two-dimensional convergent-divergent and single expansion ramp nozzles has been investigated in the static-test facility of the Langley 16-Foot Transonic Tunnel. The internal expansion portion of the nozzle consisted of two symmetrical flat surfaces of equal length, and the external expansion portion of the nozzle consisted of a single aft flap. The aft flap could be varied in angle independently of the upper internal expansion surface to which it was attached. The effects of internal expansion ratio, nozzle thrust-vector angle (-30 deg. to 30 deg., aft flap shape, aft flap angle, and sidewall containment were determined for dry and afterburning power settings. In addition, a partial afterburning power setting nozzle, a fully deployed thrust reverser, and four vertical takeoff or landing nozzle, configurations were investigated. Nozzle pressure ratio was varied up to 10 for the dry power nozzles and 7 for the afterburning power nozzles.

Re, R. J.↗

NASA NTRS1985

A research program in active control/aeroelasticity

In this research period a synthesis methodology for multifunctional robust aeroservoelastic systems was developed. The development consisted of the following stages: (1) development of an universal diagram to determine phase and gain margins of a multi-input multi-output (MIMO) system using singular value based stability margin criteria; (2) determination of singular value gradients with respect to design parameters and their application to improve stability margins of multiloop system; and (3) application of constrained optimization techniques to synthesize a low order robust controller for a high order MIMO aeroservoelastic system while satisfying several design constraints on the dynamic loads and responses and stability margins at the plant input and output. Overall research activities are summarized.

Source record↗

NASA NTRS1986

Multiaxis aircraft control power from thrust vectoring at high angles of attack

Extensive research programs conducted at the Langley Research Center have shown that thrust vectoring can be provided by multifunction (nonaxisymmetric) nozzles. Most of this research has been conducted on pitch vectoring at both static and forward flight conditions. Recent efforts have been aimed at evaluating yaw vectoring concepts at static (wind off) conditions. This paper summarizes results for three different twin-engine fighter configurations tested over a Mach number range of 0.15 to 2.47 at angles of attack up to 35 deg. The objective of these investigations was to determine the multiaxis control power characteristics provided by thrust vectoring. All three configurations employed two-dimensional convergent-divergent nozzles which provided pitch vectoring by differential deflection of the upper and lower nozzle divergent flaps. Three different means of yaw vectoring were tested: (1) a translating nozzle sidewall; (2) yaw flaps located in the nozzle sidewalls; and (3) canted nozzles. These investigations were conducted in the Langley 16-Foot Transonic Tunnel and the Lewis 10x10-Foot Supersonic Tunnel. Longitudinal and direction control power from thrust vectoring was greater than that provided by aerodynamic control effectors at low speed or at high angles of attack.

Capone, F. J.↗

NASA NTRS1985

The GOES-G and -H spacecraft design

The design of the Geostationary Operational Environmental Satellites (GOES) uses newer technology and has expanded capability relative to the predecessor GOES series of satellites. The satellite directly transmits day and night observations of hemispheric-scale weather, hurricanes, and other more localized severe storms and relays processed high-resolution observation data along with weather facsimile (WEFAX) data. Weather observations are generated in the visible and infrared spin scan radiometer (VISSR) atmospheric sounder (VAS). The VAS performs visible and infrared imaging as well as multispectral imaging (MSI) and temperature sounding of the atmosphere. The satellite provides direct interrogation and simultaneous relay transmission between the command data acquisition station (CDAS) and the multiple, widely dispersed data collection platforms (DCP). The satellites also monitor the condition of the earth's magnetic field, energetic particle flux, and X-ray emissions from the sun. The satellite performs all communications functions by means of a multifunction communications system that operates on S-band and uhf frequencies at rates varying from 100 bit/s to 28 megabit/s. An experimental capability for the detection of the emergency locator transmitter beacons is included in the GOES-GH design as a part of the international satellite-aided search and rescue system.

Fermelia, L. R.↗