Search NASA⌕ Search

SEARCH · Search NASA

Results for “Muon Collider”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Proton bunch compression strategies

The paper discusses main limitations on the beam power and other machine parameters for a 4 MW proton driver for muon collider. The strongest limitation comes from a longitudinal microwave instability limiting the beam power to about 1 MW for an 8 GeV compressor ring.

43 PARTICLE ACCELERATORS↗

Ionization Cooling using Parametric Resonances. Final Technical Report on SBIR Project DE-FG02-04ER84016

Ionization Cooling using Parametric Resonances was an SBIR project begun in July 2004 and ended in January 2008 with Muons, Inc., (Dr. Rolland Johnson, PI), and Thomas Jefferson National Accelerator Facility (JLab) (Dr. Yaroslav Derbenev, Subcontract PI). The project was to develop the theory and simulations of Parametric-resonance Ionization Cooling (PIC) so that it could be used to provide the extra transverse cooling needed for muon colliders in order to relax the requirements on the proton driver, reduce the site boundary radiation, and provide a better environment for experiments. During the course of the project, the theoretical understanding of PIC was developed [1,2] and a final exposition is ready for publication [Appendix I]. Workshops were sponsored by Muons, Inc. in May and September of 2007 that were devoted to the PIC technique [3]. One outcome of the workshops was the interesting and somewhat unexpected realization that the beam emittances using the PIC technique can get small enough that space charge forces can be important. A parallel effort to develop our G4beamline simulation program to include space charge effects was initiated to address this problem [4]. A method of compensating for chromatic aberrations by employing synchrotron motion was developed and simulated [5 and Appendix II]. A method of compensating for spherical aberrations using beamline symmetry was also developed and simulated [6 and Appendix III]. Different optics designs have been developed [7] using the OptiM program in preparation for applying our G4beamline simulation program, which contains all the power of the Geant4 toolkit. However, no PIC channel design that has been developed has had the desired cooling performance when subjected to the complete G4beamline simulation program. This is believed to be the consequence of the difficulties of correcting the aberrations associated with the naturally large beam angles and beam sizes of the PIC method that are exacerbated by the fringe fields of the rather complicated channel designs that have been attempted. That is, while the designs developed and tested using the matrix program OptiM can work well, a real simulation with lumped dipoles, quadrupoles, and solenoids and their associated fringe fields has not succeeded. As a consequence of this realization, a new approach is being attempted that is based on the use of a helical solenoid (HS) channel that is made of simple coils that provide a much more homogeneous magnetic field. However, in order to use the HS a new approach was required to generate a variable dispersion that is needed according to the PIC theory described above. This approach and its first implementation will be described at EPAC08 in June, 2008 [8]. In the sections of the report that follow, the general theory of muon beam cooling is described starting from the basic ideas of ionization cooling and ending with the PIC ideas that have been developed in this project.

42 ENGINEERING↗

STORAGE RING AND INTERACTION REGION MAGNETS FOR A μ+μ- HIGGS FACTORY.

A low-energy Muon Collider (MC) offers unique opportunities to study the recently found Higgs boson. However, due to a relatively large beam emittance with moderate cooling in this machine, large-aperture high- field superconducting (SC) magnets are required. The magnets need also an adequate margin to operate at a large radiation load from the muon decay showers. General specifications of the SC dipoles and quadrupoles for the 125 GeV c.o.m. Higgs Factory with an average luminosity of ~2x10**31 cm-2s-1 are formulated. Magnet conceptual designs and parameters are reported. The impact of the magnet fringe fields on the beam dynamics as well as the IR and lattice magnet protection from radiation are also reported and discussed.

Zlobin, A. V.↗

The MERIT High-Power Target Experiment at the CERN PS

We report on the analysis of data collected in the MERIT experiment at CERN during the Fall of 2007. These results validate the concept of a free mercury jet inside a high-field solenoid magnet as a target for a pulsed proton beam of 4-MW power, as needed for a future Muon Collider and/or Neutrino Factory.

43 PARTICLE ACCELERATORS↗

From optimal observables to machine learning: an effective-field-theory analysis of e + e − → W + W − at future lepton colliders

We apply machine-learning techniques to the effective-field-theory analysis of the e + e − → W + W − processes at future lepton colliders, and demonstrate their advantages in comparison with conventional methods, such as optimal observables. In particular, we show that machine-learning methods are more robust to detector effects and backgrounds, and could in principle produce unbiased results with sufficient Monte Carlo simulation samples that accurately describe experiments. This is crucial for the analyses at future lepton colliders given the outstanding precision of the e + e − → W + W − measurement (~ 10−4 in terms of anomalous triple gauge couplings or even better) that can be reached. Our framework can be generalized to other effective-field-theory analyses, such as the one of e + e − → t t ¯ or similar processes at muon colliders.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Accelerator Challenges and Opportunities for Future Neutrino Experiments

There are three types of future neutrino facilities currently under study, one based on decays of stored beta-unstable ion beams ('Beta Beams'), one based on decays of stored muon beams ('Neutrino Factory'), and one based on the decays of an intense pion beam ('Superbeam'). In this paper we discuss the challenges each design team must face and the R and D being carried out to turn those challenges into technical opportunities. A new program, the Muon Accelerator Program, has begun in the U.S. to carry out the R and D for muon-based facilities, including both the Neutrino Factory and, as its ultimate goal, a Muon Collider. The goals of this program will be briefly described.

43 PARTICLE ACCELERATORS↗

European Strategy for Future Neutrino Physics- Part 4

A workshop to discuss the possibilities for future neutrino investigations in Europe and the links to CERN. Part 4 features: "Muon Production and Capture for a Neutrino Factory" by Harold G. Kirk of Brookhaven National Laboratory, "Neutrino Factory: Downstream Systems" by Michael S. Zisman of Lawrence Berkeley National Laboratory, "Neutrino Factory Design Study, R&D Projects in Europe" by Jurgen Pozimski of Imperial College London, "Synergies" by Roland Garoby of CERN, and "From Neutrino-Factory to Muon Collider" by Steve Geer of Fermilab.

43 PARTICLE ACCELERATORS↗

Optimized Parameters for a Mercury Jet Target

A study of target parameters for a high-power, liquid mercury jet target system for a neutrino factory or muon collider is presented. Using the MARS code, we simulate particle production initiated by incoming protons with kinetic energies between 2 and 100 GeV. For each proton beam energy, we maximize production by varying the geometric parameters of the target: the mercury jet radius, the incoming proton beam angle, and the crossing angle between the mercury jet and the proton beam. The number of muons surviving through an ionization cooling channel is determined as a function of the proton beam energy. We optimize the mercury jet target parameters: the mercury jet radius, the incoming proton beam angle and the crossing angle between the mercury jet and the proton beam for each proton beam energy. The optimized target radius varies from about 0.4 cm to 0.6 cm as the proton beam energy increases. The optimized beam angle varies from 75 mrad to 120 mrad. The optimized crossing angle is near 20 mrad for energies above 5 GeV. These values differ from earlier choices of 67 mrad for the beam angle and 33 mrad for the crossing angle. These new choices for the beam parameters increase the meson production by about 20% compared to the earlier parameters. Our study demonstrates that the maximum meson production efficiency per unit proton beam power occurs when the proton kinetic energy is in the range of 5-15 GeV. Finally, the dependence on energy of the number of muons at the end of the cooling channel is nearly identical to the dependence on energy of the meson production 50 m from the target. This demonstrates that the target parameters can be optimized without the additional step of running the distribution through a code such as ICOOL that simulates the bunching, phase rotation, and cooling.

43 PARTICLE ACCELERATORS↗

The MERIT (nTOF-11) High Intensity Liquid Mercury Target Experiment at the CERN PS

The MERIT(nTOF-11) experiment is a proof-of-principle test of a target system for a high power proton beam to be used as front-end for a neutrino factory or a muon collider. The experiment took data in autumn 2007 with the fast-extracted beam from the CERN Proton Synchrotron (PS) to a maximum intensity of $30 \times 10^{12}$ per pulse. The target system, based on a free mercury jet, is capable of intercepting a 4-MW proton beam inside a 15-T magnetic field required to capture the low energy secondary pions as the source for intense muon beams. Particle detectors installed around the target setup measure the secondary particle flux out of the target and can probe cavitation effects in the mercury jet when excited by an intense proton beam. Preliminary results of the data analysis will be presented here.

43 PARTICLE ACCELERATORS↗

The MERIT(nTOF-11) High Intensity Liquid Mercury Target Experiment at the CERN PS

The MERIT(nTOF-11) experiment is a proof-of-principle test of a target system for a high power proton beam to be used as front-end for a neutrino factory or a muon collider. The experiment took data in autumn 2007 with the fast-extracted beam from the CERN Proton Synchrotron (PS) to a maximum intensity of 30 x 10{sup 12} per pulse. The target system, based on a free mercury jet, is capable of intercepting a 4-MW proton beam inside a 15-T magnetic field required to capture the low energy secondary pions as the source for intense muon beams. Particle detectors installed around the target setup measure the secondary particle flux out of the target and can probe cavitation effects in the mercury jet when excited by an intense proton beam.Preliminary results of the data analysis will be presented here.

43 PARTICLE ACCELERATORS↗

Fermilab's SC Accelerator Magnet Program for Future U.S. HEP Facilities

The invention of SC accelerator magnets in the 1970s opened wide the possibilities for advancing the energy frontier of particle accelerators, while limiting the machine circumference and reducing their energy consumption. The successful development of SC accelerator magnets based on NbTi superconductor have made possible a proton-antiproton collider (Tevatron) at Fermilab, an electron-proton collider (HERA) at DESY, a relativistic heavy ion collider (RHIC) at BNL and recently a proton-proton collider (LHC) at CERN. Further technological innovations and inventions are required as the US HEP looks forward towards the post-LHC energy or/and intensity frontiers. A strong, goal oriented national SC accelerator magnet program must take on this challenge to provide a strong base for the future of HEP in the U.S. The results and experience obtained by Fermilab during the past 30 years will allow us to play a leadership role in the SC accelerator magnet development in the U.S., in particular, focusing on magnets for a Muon Collider/Neutrino Factory [1]-[2]. In this paper, we summarize the required Muon Collider magnet needs and challenges, summarize the technology advances in the Fermilab accelerator magnet development over the past few years, and present and discuss our vision and long-term plans for these Fermilab-supported accelerator initiatives.

43 PARTICLE ACCELERATORS↗

Ionization Cooling for Muon Experiments

Possible application for muon experiments such as mu2e is discussed of the initial part of the ionization cooling channel originally developed for muon collider. It is shown that with the FNAL Booster as the proton driver the mu2e sensitivity can be increased by two orders of magnitude compared to the presently considered experiment.

43 PARTICLE ACCELERATORS↗

Use of a Helical Channel with a Large Slip Factor for Bunch Recombination

Cooling scenarios for a high-luminosity Muon Collider require bunch recombination for optimal luminosity. In this report we note that the tunable slip factor of a helical transport channel (HTC) makes it a desirable component of a bunch recombiner. A HTC with a large slip factor is desirable for the bunch recombining transport, while more isochronous transport may be preferred for RF manipulations prior to bunch recombination. The effectiveness of a bunch recombiner that starts from a string of muon bunches is presented; the bunch centers are displaced in energy at 10 MeV intervals, with each bunch having 6-D emittances equivalent to that at the end of an HCC. Eleven bunches spread from 160 to 260 MeV are demonstrated to have kinematics at the end of the channel that favor them to be merged into a single bunch with greater than 99% efficiency, ignoring decays which would be roughly 3% over the 52 m long channel (Lz = 37m with pitch angle 45º) for 200 MeV muons. Future work will examine how to transform the mono-energetic bunches at the end of the HCC into those with displaced energies at which this study has started.

43 PARTICLE ACCELERATORS↗

Recent Results from the MERIT Experiment

MERIT is a proof-of-principle experiment which demonstrates the key target concepts for the production of muons required for a muon collider or a neutrino factory. The experiment was run at CERN utilizing 14 and 24 GeV proton beams from the PS. The key elements of the experiment include the impact of the proton beam with a free flowing mercury jet within the confines of a 15-T solenoid field. Results from the experiment are reported.

43 PARTICLE ACCELERATORS↗

Working Group 7 Summary

The primary subject of working group 7 at the 2012 Advanced Accelerator Concepts Workshop was muon accelerators for a muon collider or neutrino factory. Additionally, this working group included topics that did not fit well into other working groups. Two subjects were discussed by more than one speaker: lattices to create a perfectly integrable nonlinear lattice, and a Penning trap to create antihydrogen.

43 PARTICLE ACCELERATORS↗

Proton Bunching Options

Muon Colliders need intense, very short, proton bunches. The requirements are presented and a number of possible bunching systems discussed. The best solution uses a small super-conducting buncher ring with 6 bunches that are taken though separate transports and combined on the target.

43 PARTICLE ACCELERATORS↗

Helical FOFO Snake for 6D Ionization Cooling of Muons

A channel for 6D ionization cooling of muons is described which consists of periodically inclined solenoids of alternating polarity, liquid hydrogen absorbers placed inside the solenoids and RF cavities between them. An important feature of such a channel (called Helical FOFO snake) is that it can cool simultaneously muons of both signs. Theoretical considerations as well as results of simulations with G4beamline are presented which show that a 200 MHz HFOFO snake has sufficient acceptance to be used for initial 6D cooling in muon colliders and neutrino factories.

43 PARTICLE ACCELERATORS↗