Search NASA⌕ Search

SEARCH · Search NASA

Results for “ND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

A comparison of optical technologies for a high data rate Mars link

Several optical systems, based on Nd:YAG, GaAs, and CO2 laser sources and employing both direct and heterodyne detection, are analyzed in order to assess their feasibility in providing high data rate (10-1000 Mbps) Mars-to-earth communications. The rms pointing/tracking accuracy is shown to be a critical parameter in defining the Mars-earth optical link. Data obtained reveal that unless, extremely small rms pointing and tracking errors can be achieved (sigma less than .2 microrad), the most promising optical implementation appears to be the Nd:YAG laser using direct detection and high order PPM modulation.

Spence, Rodney L.↗

Structure and superconducting properties of ((Ln(1-x)Ln*(x) 1/2 (Ba(1-y)Sr(y) 1/3 Ce 1/6)8Cu6O(z)

A variety of new oxide superconductors were prepared. The crystallographic structures of the oxides were all tetragonal and of the (Ln(+),Ce)4(Ln(+),Ba)4Cu6Oz (Ln(+) = Nd, Sm or Eu) type which had been previously discovered by Akimitsu et al. As the Sr content, y, increased when Ln = Ln(excited state) = Nd, the oxygen content, z, monotonically increased and the superconducting transition temperature, T sub c, varied exhibiting a maximum. When z was controlled directly by means of high oxygen pressure sintering techniques, T sub c was changed accordingly. T sub c's of samples with different combinations of Ln and Ln(excited state) and different values of x and y were found to depend on the magnitude of the bond valence sum for a Cu atom located in the bottom plane of the Cu-O5 pyramid. Transport and magnetization measurements were carried out to investigate the magnetic field dependence of superconducting properties and to determine the phenomenological parameters. The Hall coefficients were positive below room temperature and varied yielding a maximum with respect to temperature.

Yamauchi, H.↗

Multi-wavelength Airborne Lidar Intercomparisons of Aerosol and Cirrus Backscatter over the Pacific Ocean

Airborne CO2 and Nd:YAG lidar instruments were flown on the NASA DC-8 research aircraft during two extended missions over the Pacific. The objectives during these flights were to characterize aerosol backscatter levels at infrared wavelengths in relatively pristine regions of the troposphere, and to observe cloud effects on lidar signals. In addition, the three wavelength Nd:YAG data were processed using independent temperature profile information, in order to deduce the Rayleigh scattering component of the total backscatter at each wavelength. The data can be used to better understand the capabilities of various airborne or Earth-orbiting lidar designs to provide backscatter information from aerosols and clouds, or to provide Doppler or DIAL information from aerosol and cloud backscatter.

Menzies, Robert T.↗

Pulsed laser spectral measurement using a Fabry-Perot interferometer: Limits to resolution

We are developing a Doppler lidar system using the edge technique to measure atmospheric wind profiles. The edge technique requires a laser with a narrow spectral bandwidth and a high resolution optical filter. The lidar system will use a Nd:YAG laser operating at 1.064 microns and a high resolution Fabry-Perot interferometer for the edge filter. The Doppler shift measurement is made by locating the laser on the edge of the filter's spectral response function. Due to the steep slope on the edge, large changes in the filter transmission will be observed for small changes in frequency. The Doppler shift can be determined from a measurement of this change in filter transmission if the filter spectral response function in the region of the measurement is well known. Recently developed injection seeded solid state lasers have made near transform limited laser output readily available for lidar work. Injection-seeded Nd:YAG laser exhibit single mode output with smooth Gaussian temporal pulse shapes. Results of an experiment we conducted to evaluate the effects of a short Gaussian temporal input pulse on the spectral response of a high resolution Fabry-Perot interferometer are presented.

Notari, Anthony↗

Samarium-neodymium evolution of meteorites

The feasibility of using Sm-147 and Sm-146 as chronometers was investigated using Sm-Nd data obtained on three meteorites: Ibitira, Morristown, and Acapulco. The results of isotope analyses demonstrate the presence of in situ decay of short-lived Sm-146 in these meteorites with initial abundances of Sm-146/Sm-144 between 0.009 and 0.007 in different meteorites. Precisely defined Sm-147/Nd-143 internal isochrons were obtained yielding ages equal to 4.46 +/-0.02 AE for Ibitira, 4.47 +/-0.02 AE for Morristown, and 4.60 +/-0.03 AE for Acapulco. However, detailed examination of the coupled Sm-147/Nd-143 and Sm-146/Nd-142 parent-daughter systematics and of initial Nd-143/Nd-144 values indicated the presence of inconsistencies in the data in spite of the precise isochrons, indicating the need for care in the interpretation of the parent-daughter systematics, even when they appear well behaved.

Prinzhofer, A.↗

Post flight operation of a high peak power neodymium YAG laser aboard the G-449 payload flown on Space Shuttle Columbia mission 61-C

The Nd Yag laser flown on board the G-449 payload completed its postflight testing successfully. There was no indication that the laser had undergone any electronic or optical component failure. A postflight video was taken immediately following the return of the payload to the laboratory. Early anticipation of vibration and temperature changes contributed to the successful operation of the laser. Photographic material resulting from post flight videotape are presented. NASA safety reviews and recommendations supplied the insights which helped contribute to the successful operation of the Nd Yag laser. The safety review data is part of the technical presentation and gives some insight into why the system survived the severe environment of temperature and vibration during the flight of Space Shuttle 61-C.

Muckerheide, M. C.↗

Tests of shock chemistry in IC 443G

Eight molecular species, in the hot dense clump IC 443G, believed to be impacted by the shock wave from the SNR IC 443, are investigated. The clump consists of two distinct regions, one relatively cool, and one hotter and denser. Region 1 contains CO, HCO(+), HCN, and CN, whose abundances may be explained either by ion-molecule chemistry, or by a D shock of 60-90 km/s, passing through a clump of about 100,000/cu cm. Region 2 gives rise to SiO, CS, SO, and H2CO, and requires an ND shock of 5-15 km/s passing through a region of about 1,000,000/cu cm. Observed fractional abundances fit ND shock models if L is about 6.6 x 10 exp 15 cm. In general, observed line widths vary inversely with derived excitation density, while centroid velocities of all species are essentially identical.

Turner, B. E.↗

Solid state lasers for planetary exploration

Design and performance data for two laser transmitters for spaceborne laser ranging are presented. The first laser uses a master oscillator/power amplifier configuration consisting of a diode pumped Nd:YAG slab ring and a multipass diode pumped slab amplifier which can operate at 40 Hz for more than ten to the ninth shots. The other laser is a diode pumped Nd:YAG slab standing wave oscillator which operates at 10 Hz for more than 0.6 x 10 exp 9 shots. The lasers were specifically developed for reliability, for use in space exploitation of the Earth and nearby planets. Applications include planetary altimetry of Mars (MOLA) and Earth (GLRS), as well as space geodesy, navigation, and tracking.

Greene, Ben↗

Ages of pristine noritic clasts from lunar breccias 15445 and 15455

The Rb-Sr and Sm-Nd isotopic ages were determined for two Apollo 15 pristine lunar breccias, 15445 and 15455, collected near Spur Crater on the Apennine Front. The analyses of mineral separates from two norite samples in breccia 15445 showed that the Sm-Nd isotopic system for both norites from the large Clast B of 15445 was well defined, yielding precise ages of 4.28 +/- 0.03 Ga and 4.46 +/- 0.07 Ga, suggesting that the Cast B is a mixture of two or more lithologies. The overall age results indicate that some Mg-suite rocks are as old as ferroan-anorthosite-suite rocks. Moreover, age data of three major crustal rocks (a Mg suite, a ferroan-anorthosite suite, and an evolved suite) show that they all have variable ages.

Shih, C.-Y.↗

The use of a satellite derived vegetation index for assessment of the urban heat island effect

Satellite derived normalized difference (ND) vegetation index data, based on urban and rural region composed of a variety of land surface environments, are evaluated. These data are linearly related to the difference in observed urban and rural minimum temperatures. It is concluded that the difference in the ND index between urban and rural regions reflects the difference in the surface properties (evaporation and heat storage capacity) of these two environments and urban and rural minimum temperatures (the urban heat island effect).

Gallo, Kevin P.↗

Optimization of rod diameter in solid state lasers side pumped with multiple laser diode arrays

Results of a study to determine the optimum laser rod diameter for maximum output energy in a solid state neodymium laser transversely pumped with multiple laser diode arrays are reported here. Experiments were performed with 1.0 mm, 1.5 mm and 2.0 mm rod radii of both neodymium doped Y3Al5O12 (Nd:YAG) and La2Be2O5 (Nd:BeL) pumped with laser diode arrays having a maximum combined energy of 10.5 mJ. Equations were derived which predict the optimum rod radius and corresponding output mirror reflectivity for a given laser material and total pump energy. Predictions of the equations agreed well with the experiments for each of the laser materials which possessed significantly different laser properties from one another.

Sims, Newton, Jr.↗

An improved light source for laser ranging

The development of a new laser material, Cr-doped LiSAF, makes possible the development of a laser source for satellite ranging systems that is more superior in performance capabilities than current Nd:YAG-based laser sources. This new material offers the potential of shorter pulses and more preferable wavelengths (850 and 425 nm) than multiwavelength Nd:YAG systems, leading to superior ranging resolution and greater detection sensitivity. We are embarking on a feasibility study of a two-wavelength, mode-locked laser system based on Cr:LiSAF, providing shorter pulses for improved ranging resolution.

Hamal, Karel↗

Optical attenuation mechanism upgrades, MOBLAS, and TLRS systems

This poster presentation describes the Optical Attenuation Mechanism (OAM) Upgrades to the MOBLAS and TLRS Crustal Dynamics Satellite Laser Ranging (CDSLR) systems. The upgrades were for the purposes of preparing these systems to laser range to the TOPEX/POSEIDON spacecraft when it will be launched in the summer of 1992. The OAM permits the laser receiver to operate over the expected large signal dynamic range from TOPEX/POSEIDON and it reduces the number of pre- and post-calibrations for each satellite during multi-satellite tracking operations. It further simplifies the calibration bias corrections that had been made due to the pass-to-pass variation of the photomultiplier supply voltage and the transmit filter glass thickness. The upgrade incorporated improvements to the optical alignment capability of each CDSLR system through the addition of a CCD camera into the MOBLAS receive telescope and an alignment telescope onto the TLRS optical table. The OAM is stepper motor and microprocessor based; and the system can be controlled either manually by a control switch panel or computer controlled via an EIA RS-232C serial interface. The OAM has a neutral density (ND) range of 0.0 to 4.0 and the positioning is absolute referenced in steps of 0.1 ND. Both the fixed transmit filter and the daylight filter are solenoid actuated with digital inputs and outputs to and from the OAM microprocessor. During automated operation, the operator has the option to overide the remote control and control the OAM system via a local control switch panel.

Eichinger, Richard↗

Petrologic models of 15388, a unique Apollo 15 mare basalt

Mare basalt 15388, a feldspathic microgabbro from the Apennine Front, is chemically and petrographically distinct from Apollo 15 picritic, olivine-normative (ON), and quartz-normative basalts. The evolved chemistry, coarse texture, lack of olivine, and occurrence of cristobalite in 15388 argue for derivation by a late-stage magmatic process that is significantly removed from parental magma. It either crystallized from a magma evolved from the more mafic Apollo 15 basalts, or it crystallized from a currently unrepresented magma. Rb-Sr and Sm-Nd isotopic systematics yield isochron ages of 3.391 plus or minus 0.036 and 3.42 plus or minus 0.07 Ga, respectively, and epsilon(sub Nd) = 8.6 plus or minus 2.4, which is relatively high for Apollo 15 mare basalts. In contrast to chemical patterns of average Apollo 15 ON basalts and Apollo 15 picritic basalt, 15388 has a strongly positive LREE slope, high Ti, shallower HREE slope and a slightly positive Eu anomaly. These features argue against 15388 evolution by simple olivine fractionation of a parental ON or picritic basalt magma, although olivine is a dominant liquidus phase in both potential parents.

Hughes, S. S.↗

AVIRIS as a tool for carbonatite exploration: Comparison of SPAM and Mbandmap data analysis methods

Data acquired with the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) of the Mountain Pass, San Bernadino County, California, area were analyzed to evaluate the use of narrow-band imaging data for carbonatite exploration. Carbonatites are igneous carbonate-rich rocks that are economically important in part because they are the major source for rare-earth minerals. Because the 224 AVIRIS spectral channels have a nominal spectral resolution of 10 nm, narrow absorption features such as those displayed by the rare-earth elements neodymium (Nd) and samarium (Sm) may be detected. The Mountain Pass region encompasses a well-exposed sequence of sedimentary, metamorphic, and igneous rocks, including an alkalic carbonatite intrusion. The carbonatite was emplaced in Precambrian granitic rocks that are fault bounded by a thick suite of Paleozoic, sedimentary rock, predominantly dolomite. The carbonatite stock, the major source of light rare-earth elements (REE) in the United States, affords the opportunity to test AVIRIS capabilities for detecting REE absorption features. Nd-bearing minerals display narrow, sharp and distinctive spectral features at 580, 740, 800, and 870 nm. Minerals bearing Sm display similarly sharp features near 1090, 1250, 1410, and 1550 nm. The more common REE, lanthanum and cerium, do not display absorption features in the visible/near-infrared region in their natural oxidation states.

Kingston, Marguerite J.↗

Geochronology and petrogenesis of the western highlands alkali suite: Radiogenic isotopic evidence from Apollo 14

Several rocks of alkalic affinity, from the western highlands of the Moon, have been analyzed for their Nd and Sr isotopic compositions. One sample yields a Sm-Nd mineral isochron of 4110 = 41 Ma. This age, in conjunction with U-Pb zircon ages on two other alkalic rocks from the Apollo 14 landing site suggests a distinct western highlands 'event' which was approximately 100 Ma in duration. Since the last dregs of the lunar magma ocean likely crystallized prior to 4.3 Ga, this alkalic 'event' may have included the re-melting of evolved plutons or the remobilization of urKREEP trapped liquid from upper mantle cumulates. Alkalic lithologies such as granites and felsites have been known from the Moon since the earliest days of the Apollo lunar sample returns. However, not until 1977 were alkali-rich rocks recognized from typical highlands suites such as ferroan anorthosites (FAN) and norites and Mg-suite rocks. In the intervening years, several other alkali suite samples have been discovered and characterized, mostly through labor-intesive breccia pull-apart studies of clasts and analyses of coarse-fine fractions of soils. We will speculate on the origins of this suite of lunar highlands rocks.

Snyder, Gregory A.↗

Development of infrared sensors using energy transfer/energy upconversion processes: Study of laser excited fluorescence in rare Earth ion doped crystals

A summary is presented of the spectroscopic study of three systems: LaF3:Ho(3+), LaF3:Er(3+) and CaF2:Nd(3+). When the D levels of Ho(3+) in LaF3 were resonantly excited with a laser beam of 640 nm, upconverted emissions were detected from J (416 nm), F (485 nm), and E (546 nm) levels. Energy upconverted emissions were also observed from F and E levels of Ho(3+) when the material was excited with an 800 nm near infrared laser. When the D levels of Er(3+) in LaF3 were resonantly excited with a laser beam of 637 nm, upconverted emissions were detected from the E (540 nm) and P (320, 400, and 468 nm) levels. Energy upconverted emissions were also observed from F, E, and D levels of Er(3+) when the material was resonantly excited with an 804 nm near infrared laser. When the D levels of Nd(3+) in CaF2 were resonantly excited with a laser beam of 577 nm, upconverted emissions were detected from the L (360 and 382 nm), K (418 nm), and I (432 nm) levels. Very weak upconverted emissions were detected when this system was irradiated with a near infrared laser. The numbers in parentheses are the wavelengths of the emissions.

Nash-Stevenson, S. K.↗

Doppler global velocimetry: Development of a flight research instrumentation system for application to non-intrusive measurements of the flow field

Doppler Global Velocimetry (DGV) is a new diagnostic tool that offers potential for flow field measurements in flight by acquiring three-component velocity data in near real-time during flight maneuvers. The feasibility of implementation of a flight DGV system aboard NASA's High-Angle-of-Attack Research Vehicle (HARV) was addressed in this work by identifying the essential characteristics of a flight measurement system and by performing calibration and error tests. Results from this work were: an outline that establishes a preliminary basis for system configurations by analyzing measurement errors, installation issues, and operating requirements; measurement of the accuracy of the DGV technique using a laboratory breadboard DGV system based on a frequency-doubled Nd: YAG laser and iodine Absorption Line Filter (ALF), which showed excellent agreement between the DGV data and pilot measurements on a laminar flow jet with velocities of up to 150 m/sec; a survey of DGV system components and technologies that are relevant to the design of a flight measurement system, including a survey of cameras for the next generation DGV receivers; an assessment of the candidate lasers and absorption line filters for the flight system, resulting in a near-term recommendation of Nd: host lasers and an iodine ALF for both flight and wind tunnel applications.

Komine, Hiroshi↗