Search NASA⌕ Search

SEARCH · Search NASA

Results for “Observation geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Height-depth ratios of lunar and terrestrial craters.

Quantitative analysis of Gilbert's (1893) observation regarding the surface geometry of lunar craters and terrestrial calderas. Topographic measurements were made using the ratio of exterior rim height to interior crater depth, and then extended to other types of crater. The morphometric data obtained as well as those presented elsewhere (Murray et al., 1970; Guest and Murray, 1969) verify Gilbert's contention that terrestrial calderas and most rimmed lunar craters are entirely unrelated phenomena. Auxiliary characteristics previously interpreted in terms of primary volcanic cratering on the moon are either of nonendogenic origin or are secondary endogenic features superposed on initial impact landforms (Pike, 1967).

Pike, R. J.↗

Design model for the baffle aperture region of a hollow cathode thruster

A current balance on the main discharge chamber of an electron bombardment thruster is carried out. It is shown that the discharge current is the sum of the net cathode emission current, the beam current, and the ion current to cathode potential surfaces. Measurements of ion currents outside the virtual anode surface in a SERT II divergent magnetic field thruster show that relatively few ions cross this surface. This implies that ions are directed preferentially toward the anode and cathode pole pieces. A simple theoretical model useful as an aid in the design of the baffle aperture region of a hollow cathode equipped thruster is developed. The electron diffusion process through the aperture is modeled in accordance with the Bohm diffusion theory. The model is shown to yield consistent results for a given thruster geometry over substantial changes in operating conditions. The model's design usefulness is limited by a factor of two uncertainty observed over different thruster/cathode region geometries and by the accuracy to which the plasma parameters required as inputs to the model can be specified.

Brophy, J. R.↗

Solar concentration properties of flat fresnel lenses with large F-numbers

The solar concentration performances of flat, line-focusing sun-tracking Fresnel lenses with selected f-numbers between 0.9 and 2.0 were analyzed. Lens transmittance was found to have a weak dependence on f-number, with a 2% increase occuring as the f-number is increased from 0.9 to 2.0. The geometric concentration ratio for perfectly tracking lenses peaked for an f-number near 1.35. Intensity profiles were more uniform over the image extent for large f-number lenses when compared to the f/0.9 lens results. Substantial decreases in geometri concentration ratios were observed for transverse tracking errors equal to or below 1 degree for all f-number lenses. With respect to tracking errors, the solar performance is optimum for f-numbers between 1.25 and 1.5.

Cosby, R. M.↗

Development of plane strain fracture toughness test for ceramics using Chevron notched specimens

Chevron-notched four-point-bend and short-bar specimens have been used to determine the fracture toughness of sintered aluminum oxide and hot-pressed silicon nitride ceramics. The fracture toughness for Si3N4 is found to be essentially independent of the specimen size and chevron notch configuration, with values ranging from 4.6 to 4.9 MNm exp -3/2. In contrast, significant specimen size and notch geometry effects have been observed for Al2O3, with the fracture toughness ranging from 3.1 to 4.7 MNm exp -3/2. These effects are attributed to a rising crack growth resistance curve for the Al2O3 tested.

Bubsey, R. T.↗

The utility of calibration - Landsat 4 TM simulator data, Patrick Draw, Wyoming

A novel calibration approach was used for Landsat 4 TM simulator data acquired at the Patrick Draw test site, Wyoming, where the 'true' reflectance spectrum for any pixel area cannot be practically determined because of mixing of spectral components. An empirically derived function was first applied to the scanner data to remove the brightness gradient due to directional scattering and surface geometry. Based on the observation that the distribution of scanner brightness values (DN) were Gaussian, the minimum, mean, and maximum DN for each band were extracted and plotted versus the similar percent reflectance values determined from a large representative collection of field reflectance data for the area. These plots provided linear transformations relating DN value to reflectance in each band.

Lang, H. R.↗

Vortex flow hysteresis

An experimental study was conducted to quantify the hysteresis associated with various vortex flow transition points and to determine the effect of planform geometry. The transition points observed consisted of the appearance (or disappearance) of trailing edge vortex burst and the transition to (or from) flat plate or totally separated flows. Flow visualization with smoke injected into the vortices was used to identify the transitions on a series of semi-span models tested in a low speed tunnel. The planforms tested included simple deltas (55 deg to 80 deg sweep), cranked wings with varying tip panel sweep and dihedral, and a straked wing. High speed movies at 1000 frames per second were made of the vortex flow visualization in order to better understand the dynamics of vortex flow, burst and transition.

Cunningham, A. M., Jr.↗

Thermal infrared observations of Mars (7.5-12.8 microns) during the 1990 opposition

Thirteen spectra of Mars, in the 7.5 to 12.8 micron wavelength were obtained on 7 Dec. 1990 from the Infrared Telescope Facility (IRTF). For these observations, a grating with an ultimate resolving power of 120 to 250 was used and wavelengths were calibrated for each grating setting by comparison with the absorption spectrum of polystyrene measured prior to each set of observations. By sampling the Nyquist limit at the shortest wavelengths, an effective resolving power of about 120 over the entire wavelength range was achieved. A total of four grating settings were required to cover the entire wavelength region. A typical observing sequence consisted of: (1) positioning the grating in one of the intervals; (2) calibrating the wavelength of positions; and (3) obtaining spectra for a number of spots on Mars. Several observations of the nearby stellar standard star, alpha Tauri, were also acquired throughout the night. Each Mars spectrum represents an average of 4 to 6 measurements of the individual Mars spots. As a result of this observing sequence, the viewing geometry for a given location or spot on Mars does not change, but the actual location of the spot on Mars's surface varies somewhat between the different grating settings. Other aspects of the study are presented.

Roush, T. L.↗

A comparison and review of steady-state and time-varying reconnection

Extensions of Petschek's (1964) analysis are reviewed and used to investigate the steady-state and time-dependent reconnection in a current sheet geometry of the type observed at the magnetopause. It is shown that steady-state reconnection appears as a very special case in a time-dependent analysis. A single theoretical framework is proposed for interpreting reconnection phenomena at the magnetopause and for investigating the characteristics of dayside reconnection.

Semenov, V. S.↗

The accretion halo in AM Herculis systems

Previous phase-resolved spectropolarimetric observations of the AM Herculis systems V834 Centauri (E1405-451) and EF Eridani have shown broad, Zeeman-shifted absorption features during the bright phases. These features are thought to be nonphotospheric in origin, and to arise from a cool 'halo' of unshocked gas surrounding the accretion shock on the surface of the white dwarf primary. Preliminary models for the accretion halo region are presented and these models are used to perform a more detailed analysis of the relevant data for these two systems than has previously been done. To explain the observed halo Zeeman features, geometries which are consistent with the presence of linearly extended cyclotron emission regions are required. Such regions have previously been deduced from different considerations by other investigators. The estimated masses for the accretion halo are comparable to the mass of the cyclotron emission region.

Achilleos, N.↗

The (C2) 158 micrometer emission from the Horsehead nebula

The C II 158 micrometer line and the several rotational lines of CO, CO-13, and CS toward selected positions in the Horsehead extinction region in IC 434 are mapped. The observations show that the region has a gas density of about 10,000 cu cm and an external UV (Ultraviolet) flux to 20 to 100 times the average interstellar UV field. Although this is a regime where the C+ emission varies rapidly with UV intensity, fine structure line emission from gas with this range of physical conditions were not investigated previously. Comparisons of results with models of photodissociation regions show that existing plane parallel photodissociation region models are in general agreement with the observed intensity. It is not necessary to invoke a clumpy structure in the boundary layer to explain the observations, but the overall geometry of the cloud is important in determining the distribution of C+ emission.

Zhou, S.↗

Flow Visualization by Elastic Light Scattering in the Boundary Layer of a Supersonic Flow

We demonstrate instantaneous flow visualization of the boundary layer region of a Mach 2.5 supersonic flow over a flat plate that is interacting with an impinging shock wave. Tests were performed in the Unitary Plan Wind Tunnel (UPWT) at NASA Langley Research Center. The technique is elastic light scattering using 10-nsec laser pulses at 532 nm. We emphasize that no seed material of any kind, including water (H2O), is purposely added to the flow. The scattered light comes from a residual impurity that normally exists in the flow medium after the air drying process. Thus, the technique described here differs from the traditional vapor-screen method, which is typically accomplished by the addition of extra H2O vapor to the airflow. The flow is visualized with a series of thin two-dimensional light sheets (oriented perpendicular to the streamwise direction) that are located at several positions downstream of the leading edge of the model. This geometry allows the direct observation of the unsteady flow structure in the spanwise dimension of the model and also allows the indirect observation of the boundary layer growth in the streamwise dimension.

Herring, G. C.↗

Using Multiwavelength Observations to Determine the Black Hole Mass and Accretion Rate in the Type 1 Seyfert Galaxy NGC 5548

We model the spectral energy distribution of the type 1 Seyfert galaxy NGC 5548, fitting data from simultaneous optical, UV, and X-ray monitoring observations. We assume a geometry consisting of a hot central Comptonizing region surrounded by a thin accretion disk. The properties of the disk and the hot central region are determined by the feedback occurring between the hot Comptonizing region and thermal reprocessing in the disk that, along with viscous dissipation, provides the seed photons for the Comptonization process. The constraints imposed upon this model by the multiwavelength data allow us to derive limits on the central black hole mass, Mu is approximately or less than 2x10(exp 7) solar mass, the accretion rate, Mu is approximately or less than 2.5x10(exp 5) sq solar mass per year/Mu, and the radius of the transition region between the thin outer disk and the geometrically thick, hot inner region, is approximately 2-5x10(exp 14) cm.

Chiang, James↗

Measurement of Gravitational Spin-Orbit Coupling in a Binary Pulsar System

In relativistic gravity, a spinning pulsar will precess as it orbits a compact companion star. We have measured the effect of such precession on the average shape and polarization of the radiation from PSR B1534+12. We have also detected, with limited precision, special-relativistic aberration of the revolving pulsar beam due to orbital motion. Our observations fix the system geometry, including the misalignment between the spin and orbital angular momenta, and yield a measurement of the precession timescale consistent with the predictions of General Relativity.

Stairs, I. H.↗

Testing Installed Propulsion For Shielded Exhaust Configurations

Jet-surface interaction (JSI) can be a significant factor in the exhaust noise of installed propulsion. Tests to further understanding and prediction of the acoustic impacts of JSI have been described. While there were many objectives for the NASA JSI1044 test, the overall objective was to prepare for a 2016 test validating the design of a low-noise, low-boom supersonic commercial airliner. In this paper we explore design requirements for a partial aircraft model to be used in subscale acoustic testing, especially focusing on the amount of shielding surface that must be provided to simulate the acoustic environment between propulsion exhaust system and observer. We document the dual-stream jets, both nozzle and flow conditions, which were tested to extend JSI acoustic modeling from simple single-stream jets to realistic dual-stream exhaust nozzles. Examples of observations found as surface geometry and flow conditions were varied were provided. And we have presented initial measurements of the installation impacts of integrating the propulsion on the airframe for a supersonic airliner with realistic airframe geometries and nozzles.

engine airframe integration↗

ACCELERATING FUSION REACTOR NEUTRONICS MODELING BY AUTOMATIC COUPLING OF HYBRID MONTE CARLO/DETERMINISTIC TRANSPORT ON CAD GEOMETRY

Detailed radiation transport calculations are necessary for many aspects of the design of fusion energy systems (FES) such as ensuring occupational safety, assessing the activation of system components for waste disposal, and maintaining cryogenic temperatures within superconducting magnets. Hybrid Monte Carlo (MC)/deterministic techniques are necessary for this analysis because FES are large, heavily shielded, and contain streaming paths that can only be resolved with MC. The tremendous complexity of FES necessitates the use of CAD geometry for design and analysis. Previous ITER analysis has required the translation of CAD geometry to MCNP5 form in order to use the AutomateD VAriaNce reducTion Generator (ADVANTG) for hybrid MC/deterministic transport. In this work, ADVANTG was modified to support CAD geometry, allowing hybrid (MC)/deterministic transport to be done automatically and eliminating the need for this translation step. This was done by adding a new ray tracing routine to ADVANTG for CAD geometries using the Direct Accelerated Geometry Monte Carlo (DAGMC) software library. This new capability is demonstrated with a prompt dose rate calculation for an ITER computational benchmark problem using both the Consistent Adjoint Driven Importance Sampling (CADIS) method an the Forward Weighted (FW)-CADIS method. The variance reduction parameters produced by ADVANTG are shown to be the same using CAD geometry and standard MCNP5 geometry. Significant speedups were observed for both neutrons (as high as a factor of 7.1) and photons (as high as a factor of 59.6).

Biondo, Elliott D↗

Observations on sub-critical flaw growth in complex cracked body geometries

This paper reviews an experimental method for estimating both flaw shapes and stress intensity factors for complex three dimensional cracked body problems encountered in the sub-critical flaw growth regime prior to instability. Examples of the use of the method are cited, and the energy-density approach is suggested as a theory of sufficient generality to accommodate the complex behaviors observed.

Smith, C. W.↗

Effect of magnetic field geometry on the wave signature of the pickup of interstellar neutrals

By using the technique of Johnstone et al. (1991), the asymptotic wave spectrum induced by the pickup of interstellar ions in the heliosphere is derived. This approach is independent of quasi-linear theory. The asymptotic wave spectrum is calculated from the standard resonance condition by assuming that the asymptotic ion distribution is bispherical and by using conservation of energy. The calculation places no restriction on either the ratio of Alfven speed to solar wind flow speed or the particle pitch angle. Spectra for various geometries (relative orientations of the magnetic field and solar wind velocity) are calculated. Absolute upper limits to the expected wave enhancements are calculated. These upper limits are compared to the background fluctuation spectrum extrapolated from 0.87 AU, assuming a spectral index of -5/3 and radial dependences of -2 and -3. The heliocentric radial distances at which the peaks in the various geometry-dependent wave spectra are expected to be observable above the background are identified. Peaks due to pickup hydrogen at the proton gyrofrequency are found to be always stronger relative to the background in parallel than in perpendicular geometries. The parallel-geometry excitations consist only of sunward propagating waves. In perpendicular geometries a peak also occurs, this time near 0.1 of the proton gyrofrequency (corresponding to the peak calculated by Lee and Ip (1987)). However, the steep spectral dependence of the ambient wave field makes it unlikely that this peak will be observed inside 20 AU. A similar result holds for the case of pickup-helium induced excitation at the helium gyrofrequency. Inside 10 AU, peaks at these lower frequencies tend to be obscured by the steep frequency dependence (proportional to -5/3) of the ambient spectrum and then are only observable in parallel geometries.

Williams, L. L.↗

Signal Analysis of Helicopter Blade-Vortex-Interaction Acoustic Noise Data

Blade-Vortex-Interaction (BVI) produces annoying high-intensity impulsive noise. NASA Ames collected several sets of BVI noise data during in-flight and wind tunnel tests. The goal of this work is to extract the essential features of the BVI signals from the in-flight data and examine the feasibility of extracting those features from BVI noise recorded inside a large wind tunnel. BVI noise generating mechanisms and BVI radiation patterns an are considered and a simple mathematical-physical model is presented. It allows the construction of simple synthetic BVI events that are comparable to free flight data. The boundary effects of the wind tunnel floor and ceiling are identified and more complex synthetic BVI events are constructed to account for features observed in the wind tunnel data. It is demonstrated that improved recording of BVI events can be attained by changing the geometry of the rotor hub, floor, ceiling and microphone. The Euclidean distance measure is used to align BVI events from each blade and improved BVI signals are obtained by time-domain averaging the aligned data. The differences between BVI events for individual blades are then apparent. Removal of wind tunnel background noise by optimal Wiener-filtering is shown to be effective provided representative noise-only data have been recorded. Elimination of wind tunnel reflections by cepstral and optimal filtering deconvolution is examined. It is seen that the cepstral method is not applicable but that a pragmatic optimal filtering approach gives encouraging results. Recommendations for further work include: altering measurement geometry, real-time data observation and evaluation, examining reflection signals (particularly those from the ceiling) and performing further analysis of expected BVI signals for flight conditions of interest so that microphone placement can be optimized for each condition.

Rogers, James C.↗