Search NASA⌕ Search

SEARCH · Search NASA

Results for “Outer Approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Conformational Exchange in a Membrane Transport Protein Is Altered in Protein Crystals

Successful macromolecular crystallography requires solution conditions that may alter the conformational sampling of a macromolecule. Here, site-directed spin labeling is used to examine a conformational equilibrium within BtuB, the Escherichia coli outer membrane transporter for vitamin B{sub 12}. Electron paramagnetic resonance (EPR) spectra from a spin label placed within the N-terminal energy coupling motif (Ton box) of BtuB indicate that this segment is in equilibrium between folded and unfolded forms. In bilayers, substrate binding shifts this equilibrium toward the unfolded form; however, EPR spectra from this same spin-labeled mutant indicate that this unfolding transition is blocked in protein crystals. Moreover, crystal structures of this spin-labeled mutant are consistent with the EPR result. When the free energy difference between substates is estimated from the EPR spectra, the crystal environment is found to alter this energy by 3 kcal/mol when compared to the bilayer state. Approximately half of this energy change is due to solutes or osmolytes in the crystallization buffer, and the remainder is contributed by the crystal lattice. These data provide a quantitative measure of how a conformational equilibrium in BtuB is modified in the crystal environment, and suggest that more-compact, less-hydrated substates will be favored in protein crystals.

59 BASIC BIOLOGICAL SCIENCES↗

Validating the simulation of beam-ion charge exchange in MAST Upgrade

Abstract Simulation of the impact of charge-exchange (CX) reactions on beam ions in the Mega Amp Spherical Tokamak (MAST) Upgrade was compared to measurements carried out with a fission chamber (neutron fluxes) and a fast ion deuterium-alpha (FIDA) diagnostic. A simple model was developed to reconstruct the outer-midplane neutral density based on measurements of deuterium-alpha emission from edge neutrals, and on Thomson scattering measurements of electron density and temperature. The main computational tools used were the ASCOT orbit-following code and the FIDASIM code for producing synthetic FIDA signals. The neutral density reconstruction agrees qualitatively with SOLPS-ITER modelling and yields a synthetic passive FIDA signal that is consistent with measurement. When CX losses of beam ions are accounted for, predicted neutron emission rates are quantitatively more consistent with measurement. It was necessary to account for CX losses of beam ions in simulations to reproduce the measured passive FIDA signal quantitatively and qualitatively. The results suggest that the neutral density reconstruction is a good approximation, that CX with edge neutrals causes significant beam-ion losses in MAST Upgrade, typically 20% of beam power, and that the ASCOT fast-ion CX model can be used to accurately predict the redistribution and loss of beam ions due to CX.

Physics↗

ABUNDANT CIRCUMSTELLAR SILICA DUST AND SiO GAS CREATED BY A GIANT HYPERVELOCITY COLLISION IN THE {approx}12 MYR HD172555 SYSTEM

The fine dust detected by infrared (IR) emission around the nearby {beta} Pic analog star HD172555 is very peculiar. The dust mineralogy is composed primarily of highly refractory, nonequilibrium materials, with approximately three quarters of the Si atoms in silica (SiO{sub 2}) species. Tektite and obsidian lab thermal emission spectra (nonequilibrium glassy silicas found in impact and magmatic systems) are required to fit the data. The best-fit model size distribution for the observed fine dust is dn/da = a {sup -3.95{+-}}{sup 0.10}. While IR photometry of the system has stayed stable since the 1983 IRAS mission, this steep a size distribution, with abundant micron-sized particles, argues for a fresh source of material within the last 0.1 Myr. The location of the dust with respect to the star is at 5.8 {+-} 0.6 AU (equivalent to 1.9 {+-} 0.2 AU from the Sun), within the terrestrial planet formation region but at the outer edge of any possible terrestrial habitability zone. The mass of fine dust is 4 x 10{sup 19}-2 x 10{sup 20} kg, equivalent to a 150-200 km radius asteroid. Significant emission features centered at 4 and 8 {mu}m due to fluorescing SiO gas are also found. Roughly 10{sup 22} kg of SiO gas, formed by vaporizing silicate rock, is also present in the system, and a separate population of very large, cool grains, massing 10{sup 21}-10{sup 22} kg and equivalent to the largest sized asteroid currently found in the solar system's main asteroid belt, dominates the solid circumstellar material by mass. The makeup of the observed dust and gas, and the noted lack of a dense circumstellar gas disk, strong stellar X-ray activity, and an extended disk of {beta} meteoroids argues that the source of the observed circumstellar materials is a giant hypervelocity (>10 km s{sup -1}) impact between large rocky planetesimals, similar to the ones which formed the Moon and which stripped the surface crustal material off of Mercury's surface.

79 ASTRONOMY AND ASTROPHYSICS↗

Degeneration of Biogenic Superparamagnetic Magnetite

ABSTRACT. Magnetite crystals precipitated as a consequence of Fe(III) reduction by Shewanella algae BrY after 265 hours incubation and 5-year storage were investigated with transmission electron microscopy, M ssbauer spectroscopy and X-ray diffraction. The magnetite crystals were typically superparamagnetic with an approximate size of 13 nm. The lattice constants of the 265 hour and 5-year crystals are 8.4164 and 8.3774 , respectively. The M ssbauer spectra indicated that the 265 hour magnetite had excess Fe(II) in its crystal-chemistry (Fe3+1.9901Fe2+ 1.0149O4) but the 5-year magnetite was Fe(II)-deficient in stoichiometry (Fe3+2.3875Fe2+0.4188O4). Such crystal-hemical changes may be indicative of the degeneration of superparamagnetic magnetite through the aqueous oxidization of Fe(II) anaerobically, and the concomitant oxidation of the organic phases(fatty acid methyl esters) that were present during the initial formation of the magnetite. The observation of a corona structure on the aged magnetite corroborates the oxidation of Fe(II) on the outer layers of magnetite crystals. These results suggest that there may be a possible link between the enzymatic activity of the bacteria and the stability of Fe(II)-excess magnetite, which may help explain why stable nano-magnetite grains are seldom preserved in natural environments.

Li, Dr. Yi-Liang↗

SHOCK BREAKOUT IN DENSE MASS LOSS: LUMINOUS SUPERNOVAE

We examine the case where a circumstellar medium around a supernova is sufficiently opaque that a radiation-dominated shock propagates in the circumstellar region. The initial propagation of the shock front into the circumstellar region can be approximated by a self-similar solution that determines the radiative energy in a shocked shell; the eventual escape of this energy gives the maximum luminosity of the supernova. If the circumstellar density is described by {rho} = Dr {sup -2} out to a radius R{sub w} , where D is a constant, the properties of the shock breakout radiation depend on R{sub w} and R{sub d} {identical_to} {kappa}Dv{sub sh}/c, where {kappa} is the opacity and v{sub sh} is the shock velocity. If R{sub w} >R{sub d} , the rise to maximum light begins at {approx}R{sub d} /v{sub sh}; the duration of the rise is also {approx}R{sub d} /v{sub sh}; the outer parts of the opaque medium are extended and at low velocity at the time of peak luminosity; and a dense shell forms whose continued interaction with the dense mass loss gives a characteristic flatter portion of the declining light curve. If R{sub w} < R{sub d} , the rise to maximum light begins at R{sub w} /v{sub sh}; the duration of the rise is R {sup 2}{sub w}/v{sub sh} R{sub d} ; the outer parts of the opaque medium are not extended and are accelerated to high velocity by radiation pressure at the time of maximum luminosity; and a dense shell forms but does not affect the light curve near maximum. We argue that SN 2006gy is an example of the first kind of event, while SN 2010gx and related supernovae are examples of the second.

79 ASTRONOMY AND ASTROPHYSICS↗

Microsized Pore Structure Determination in EPDM Rubbers Using High-Pressure 129 Xe NMR Techniques

Microsized pore parameters, such as pore size and distance between pores in a series of model EPDM rubbers, were determined in situ under the pressure of 500 psi using 129 Xe nuclear magnetic resonance (NMR) techniques: spin–lattice (T 1 ) and spin–spin (T 2 ) relaxation measurements, pulsed-field gradient (PFG) NMR, and two-dimensional exchange spectroscopy (2D EXSY). The T 1 /T 2 (>>1) ratio for the xenon confined in the pores is larger than that for nonconfined free xenon. This suggests that almost the entire pore surface interacts with xenon atoms like a closed pore. While these pores still connect each other through very narrow diffusion/exchange channels, it is possible to observe the echo decay in PFG-NMR and cross-peaks in 2D EXSY. The results show that both diffusion (D pore ≈ 2.1 × 10 –10 m 2 /s) and exchange (exchange rate, τ exch = a few tens of milliseconds) of xenon between a pore within the material and outer surface are prolonged. The exchange distances (l), which correspond to the xenon gas penetration depth, were estimated to be 70–100 μm based on the measured diffusion coefficients and exchange rate (1/τ exch ). NMR diffraction analysis reveals that pore size (a) and pore distance (b) are on the order of magnitude of micrometers and tens of micrometers, while the diffusion coefficients of xenon gas in the diffusion channels (D eff ) are about 10 –8 m 2 /s. Overall, this study suggests that the pores with a few micrometers connected through very narrow flowing channels with the length of several tens of micrometers are developed 70 to 100 μm below the rubber surface. Furthermore, the overall steady-state diffusion of xenon is slower, approximately 2 orders of magnitudes, than the diffusion in the channel between the pores. Finally, the pore and exchange distances correlated with the composition of rubbers showed that the properties of EPDM rubber as a high-pressure gas barrier could be improved by reducing the size of cracks and the depth of gas penetration by the addition of both carbon black and silica fillers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PHOTOEVAPORATION OF CIRCUMSTELLAR DISKS REVISITED: THE DUST-FREE CASE

Photoevaporation by stellar ionizing radiation is believed to play an important role in the dispersal of disks around young stars. The mass-loss model for dust-free disks developed by Hollenbach et al. is currently regarded as the conventional one and has been used in a wide variety of studies. However, the rate in this model was derived using the crude so-called 1+1D approximation of ionizing radiation transfer, which assumes that diffuse radiation propagates in a direction vertical to the disk. In this study, we revisit the photoevaporation of dust-free disks by solving the two-dimensional axisymmetric radiative transfer for steady-state disks. Unlike that solved by the conventional model, we determine that direct stellar radiation is more important than the diffuse field at the disk surface. The radial density distribution at the ionization boundary is represented by a single power law with index -3/2 in contrast to the conventional double power law. For this distribution, the photoevaporation rate from the entire disk can be written as a function of the ionizing photon emissivity {Phi}{sub EUV} from the central star and the disk outer radius r{sub d} as follows: M-dot{sub PE} = 5.4 x 10{sup -5} ({Phi}{sub EUV}/10{sup 49} s{sup -1}){sup 1/2} (r{sub d}/1000 AU){sup 1/2} M{sub Sun} yr{sup -1}. This new rate depends on the outer disk radius rather than on the gravitational radius as in the conventional model, because of the enhanced contribution to the mass loss from the outer disk annuli. In addition, we discuss its applications to present-day as well as primordial star formation.

79 ASTRONOMY AND ASTROPHYSICS↗

Characterization of Tubing from Advanced ODS alloy (FCRD-NFA1)

Fabrication methods are being developed and tested for producing fuel clad tubing of the advanced ODS 14YWT and FCRD-NFA1 ferritic alloys. Three fabrication methods were based on plastically deforming a machined thick-wall tube sample of the ODS alloys by pilgering, hydrostatic extrusion or drawing to decrease the outer diameter and wall thickness and increase the length of the final tube. The fourth fabrication method consisted of the additive manufacturing approach involving solid-state spray deposition (SSSD) of ball milled and annealed powder of 14YWT for producing thin-wall tubes. Of the four fabrication methods, two methods were successful at producing tubing for further characterization: production of tubing by high-velocity oxy-fuel spray forming and production of tubing using high-temperature hydrostatic extrusion. The characterization described shows through neutron diffraction the texture produced during extrusion while maintaining the beneficial oxide dispersion. In this research, the parameters for innovative thermal spray deposition and hot extrusion processing methods have been developed to produce the final nanostructured ferritic alloy (NFA) tubes having approximately 0.5 mm wall thickness. Effect of different processing routes on texture and grain boundary characteristics has been investigated. It was found that hydrostatic extrusion results in combination of plane strain and shear deformations which generate rolling textures of α- and γ-fibers on {001}<110> and {111}<110> together with a shear texture of ζ-fiber on {011}<211> and {011}<011>. On the other hand, multi-step plane strain deformation in cross directions leads to a strong rolling textures of θ- and ε-fiber on {001}<110> together with weak γ-fiber on {111}<112>. Even though the amount of the equivalent strain is similar, shear deformation leads to much lower texture indexes compared to the plane strain deformations. Moreover, while 50% of hot rolling brings about a large number of high-angle grain boundaries (HAB), 44% of shear deformation results in large amount of low-angle boundaries (LAB) showing the incomplete recrystallization.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Long-term Dynamical Stability in the Outer Solar System. I. The Regular and Chaotic Evolution of the 34 Largest Trans-Neptunian Objects

We carried out an extensive analysis of the stability of the outer solar system, making use of the frequency analysis technique over short-term integrations of nearly 100,000 test particles, as well as a statistical analysis of 200 1 Gyr long numerical simulations, which consider the mutual perturbations of the giant planets and the 34 largest trans-Neptunian objects (we have called all 34 objects “dwarf planets,” DPs, even if probably only the largest of them are true DPs). From the frequency analysis, we produced statistical diffusion maps for a wide region of the a–e phase-space plane; we also present the average diffusion time for orbits as a function of perihelion. We later turned our attention to the 34 DPs, making an individualized analysis for each of them and producing a first approximation of their future stability. From the 200 distinct realizations of the orbital evolution of the 34 DPs, we classified the sample into three categories, including 17 stable, 11 unstable, and 6 resonant objects; we also found that, statistically, two objects from the sample will leave the trans-Neptunian region within the next gigayear, most likely being ejected from the solar system, but with a nonnegligible probability of going inside the orbit of Neptune, either to collide with a giant planet or even falling to the inner solar system, where our simulations are no longer able to resolve their continuous evolution.

79 ASTRONOMY AND ASTROPHYSICS↗

3D Surface Mapping of Capsule Fill-Tube Assemblies used in Laser-Driven Fusion Targets

This paper presents the development of a 3D surface mapping system used to measure the surface of a fusion target Capsule Fill-Tube Assembly (CFTA). The CFTA consists of a hollow Ge-doped plastic sphere, called a capsule, ranging in outer diameter between 2.2 mm and 2.6 mm and an attached 150 {micro}m diameter glass-core fill-tube that tapers down to a 10{micro} diameter at the capsule. The mapping system is an enabling technology to facilitate a quality assurance program and to archive 3D surface information of each capsule used in fusion ignition experiments that are currently being performed at the National Ignition Facility (NIF). The 3D Surface Mapping System is designed to locate and quantify surface features with a height of 50 nm and 300 nm in width or larger. Additionally, the system will be calibrated such that the 3D measured surface can be related to the capsule surface angular coordinate system to within 0.25 degree (1{sigma}), which corresponds to approximately 5 {micro}m linear error on the capsule surface.

42 ENGINEERING↗

Airfoil Computational Fluid Dynamics - 9k shapes, 2 AoA's

This dataset contains aerodynamic quantities - including flow field values (momentum, energy, and vorticity) and summary values (coefficients of lift, drag, and momentum) - for 8,996 airfoil shapes, computed using the HAM2D CFD (computational fluid dynamics) model. The airfoil shapes were designed using the separable shape tensor parameterization that encodes two-dimensional shapes as elements of the Grassmann manifold. This data-driven approach learns two independent spaces of parameter from a collection of sample airfoils. The first captures large-scale, linear perturbations, and the second defines small-scale, higher-order perturbations. For this data, we used the G2Aero database of over 19,000 airfoil shapes to learn a parameter space that captured a wide array of shape characteristics. We fixed the linear deformations to be the mean over the database and sampled new shapes over a four-dimensional parameter space of higher-order perturbation. This sampling approaches allows for isolated analysis of non-linear airfoil shape deformations while holding other aspects (e.g., airfoil thickness) approximately constant. The aerodynamic quantities for the generated airfoil were obtained using the HAM2D code, which is a finite-volume Reynolds-averaged Navier-Stokes (RANS) flow solver. We employ a fifth-order WENO scheme for spatial reconstruction with Roe's flux difference scheme for inviscid flux and second-order central differencing for viscous flux. A preconditioned GMRES method is applied for implicit integration. The Spalart-Allmaras 1-eq turbulence model is used for the turbulence closure, and the Medida-Baeder 2-eq transition model is applied to account for the effects of laminar turbulent transition. The airfoil grid is generated with a total of 400 points on the airfoil surface, the initial wall-normal spacing of y+ = 1, and an outer boundary located at 300 chord lengths away from the wall. The CFD simulations are performed at a freestream Mach number of 0.1, Reynolds number of 9M, and at two angles of attack, 4 deg. and 12 deg. The simulations were performed using the Bridges-2 system at the Pittsburgh Supercomputing Center in February 2023 as part of the INTEGRATE project funded by the Advanced Research Projects Agency - Energy in the U.S. Department of Energy. The data was collected, reformatted, and preprocessed for this OEDI submission in July 2023 under the Foundational AI for Wind Energy project funded by the U.S. Department of Energy Wind Energy Technologies Office. This dataset is intended to serve as a benchmark against which new artificial intelligence (AI) or machine learning (ML) tools may be tested. Baseline AI/ML methods for analyzing this dataset have been implemented, and a link to their repository containing those models has been provided. The .h5 data file structure can be found in the GitHub Repository resource under explore_airfoil_9k_data.ipynb.

9k↗

The ν -process with Fully Time-dependent Supernova Neutrino Emission Spectra

The neutrino process that occurs in the outer stellar shells during a supernova explosion and involves neutrino–nucleus reactions produces a range of rare, stable, and radioactive isotopes. We improve previous ν-process studies by using, for the first time, the time-dependent neutrino emission spectra, as predicted from supernova simulations, rather than a simplified parametric description modeled after the neutron star cooling phase. In particular, our calculations use time-dependent neutrino spectra for all neutrino species, consider their deviation from a Fermi–Dirac distribution, and account for the neutrino emission from the neutrino burst and accretion phases. We find that the time-dependent treatment of the neutrino emission spectra results in higher yields for the selected nuclei produced by the ν process as compared to previous studies and to the approximation of assuming constant neutrino energies corresponding to the time-averaged mean energy radiated in each species. The effect is largest for nuclides produced by charged-current reactions. Our results reflect the dynamical competition between neutrino-induced reactions and the effect of the shock passage through the star. By varying the neutrino burst luminosity and the duration of the accretion phase, we study the impact of these early emission phases and their uncertainties on the ν-process nucleosynthesis. We find that the deviation of the neutrino spectra from a Fermi–Dirac distribution calculated in supernova simulations has a negligible effect on the ν-process yields.

79 ASTRONOMY AND ASTROPHYSICS↗

Multiple time step integrators in ab initio molecular dynamics

Multiple time-scale algorithms exploit the natural separation of time-scales in chemical systems to greatly accelerate the efficiency of molecular dynamics simulations. Although the utility of these methods in systems where the interactions are described by empirical potentials is now well established, their application to ab initio molecular dynamics calculations has been limited by difficulties associated with splitting the ab initio potential into fast and slowly varying components. Here we present two schemes that enable efficient time-scale separation in ab initio calculations: one based on fragment decomposition and the other on range separation of the Coulomb operator in the electronic Hamiltonian. We demonstrate for both water clusters and a solvated hydroxide ion that multiple time-scale molecular dynamics allows for outer time steps of 2.5 fs, which are as large as those obtained when such schemes are applied to empirical potentials, while still allowing for bonds to be broken and reformed throughout the dynamics. This permits computational speedups of up to 4.4x, compared to standard Born-Oppenheimer ab initio molecular dynamics with a 0.5 fs time step, while maintaining the same energy conservation and accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Specifications and pre-production of n + -in-p large-format strip sensors fabricated in 6-inch silicon wafers, ATLAS18, for the Inner Tracker of the ATLAS Detector for High-Luminosity Large Hadron Collider

Abstract The ATLAS experiment is constructing new all-silicon inner tracking system for HL-LHC. The strip detectors cover the radial extent of 40 to 100 cm. A new approach is adopted to use p-type silicon material, making the readout in n + -strips, so-called n + -in-p sensors. This allows for enhanced radiation tolerance against an order of magnitude higher particle fluence compared to the LHC. To cope with varying hit rates and occupancies as a function of radial distance, there are two barrel sensor types, the short strips (SS) for the inner 2 and the long strips (LS) for the outer 2 barrel cylinders, respectively. The barrel sensors exhibit a square, 9.8 × 9.8 cm 2 , geometry, the largest possible sensor area from a 6-inch wafer. The strips are laid out in parallel with a strip pitch of 75.5 μm and 4 or 2 rows of strip segments. The strips are AC-coupled and biased via polysilicon resistors. The endcap sensors employ a “stereo-annulus” geometry exhibiting a skewed-trapezoid shapes with circular edges. They are designed in 6 unique shapes, R0 to R5, corresponding to progressively increasing radial extents and which allows them to fit within the petal geometry and the 6-inch wafer maximally. The strips are in fan-out geometry with an in-built rotation angle, with a mean pitch of approximately 75 μm and 4 or 2 rows of strip segments. The eight sensor types are labeled as ATLAS18xx where xx stands for SS, LS, and R0 to R5. According to the mechanical and electrical specifications, CAD files for wafer processing were laid out, following the successful designs of prototype barrel and endcap sensors, together with a number of optimizations. A pre-production was carried out prior to the full production of the wafers. The quality of the sensors is reviewed and judged excellent through the test results carried out by vendor. These sensors are used for establishing acceptance procedures and to evaluate their performance in the ATLAS collaboration, and subsequently for pre-production of strip modules and stave and petal structures.

Instruments & Instrumentation↗

THE ANTENNAE GALAXIES (NGC 4038/4039) REVISITED: ADVANCED CAMERA FOR SURVEYS AND NICMOS OBSERVATIONS OF A PROTOTYPICAL MERGER

The Advanced Camera for Surveys and the Near Infrared Camera and Multi-Object Spectrometer (NICMOS) have been used to obtain new Hubble Space Telescope images of NGC 4038/4039 ('The Antennae'). These new observations allow us to better differentiate compact star clusters from individual stars, based on both size and color. We use this ability to extend the cluster luminosity function (LF) by approximately 2 mag over our previous WFPC2 results, and find that it continues as a single power law, dN/dL {proportional_to} L {sup {alpha}} with {alpha} = -2.13 {+-} 0.07, down to the observational limit of M{sub V} {approx} -7. Similarly, the mass function (MF) is a single power law dN/dM {proportional_to} M {sup {beta}} with {beta} = -2.10 {+-} 0.20 for clusters with ages <3 x 10{sup 8} yr, corresponding to lower mass limits that range from 10{sup 4} to 10{sup 5} M{sub sun}, depending on the age range of the subsample. Hence, the power-law indices for the luminosity and MFs are essentially the same. The LF for intermediate-age clusters (i.e., {approx}100-300 Myr old objects found in the loops, tails, and outer areas) shows no bend or turnover down to M{sub V} {approx} -6, consistent with relaxation-driven cluster disruption models which predict the turnover should not be observed until M{sub V} {approx} -4. An analysis of individual {approx}0.5 kpc sized areas over diverse environments shows good agreement between values of {alpha} and {beta}, similar to the results for the total population of clusters in the system. There is tentative evidence that the values of both {alpha} and {beta} are flatter for the youngest clusters in some areas, but it is possible that this is caused by observational biases. Several of the areas studied show evidence for age gradients, with somewhat older clusters appearing to have triggered the formation of younger clusters. The area around Knot B is a particularly interesting example, with a {approx}10-50 Myr old cluster of estimated mass {approx}10{sup 6} M{sub sun} having apparently triggered the formation of several younger, more massive (up to 5 x 10{sup 6} M{sub sun}) clusters along a dust lane. A comparison with new NICMOS observations reveals that only 16% {+-} 6% of the IR-bright clusters in the Antennae are still heavily obscured, with values of A{sub V} >3 mag.

79 ASTRONOMY AND ASTROPHYSICS↗

Hot and turbulent gas in clusters

The gas in galaxy clusters is heated by shock compression through accretion (outer shocks) and mergers (inner shocks). These processes also produce turbulence. To analyse the relation between the thermal and turbulent energies of the gas under the influence of non-adiabatic processes, we performed numerical simulations of cosmic structure formation in a box of 152 Mpc comoving size with radiative cooling, UV background, and a subgrid scale model for numerically unresolved turbulence. By smoothing the gas velocities with an adaptive Kalman filter, we are able to estimate bulk flows towards cluster cores. This enables us to infer the velocity dispersion associated with the turbulent fluctuation relative to the bulk flow. For haloes with masses above 10 13 M ⊙ , we find that the turbulent velocity dispersions averaged over the warm-hot intergalactic medium (WHIM) and the intracluster medium (ICM) are approximately given by powers of the mean gas temperatures with exponents around 0.5, corresponding to a roughly linear relation between turbulent and thermal energies and transonic Mach numbers. However, turbulence is only weakly correlated with the halo mass. Since the power-law relation is stiffer for the WHIM, the turbulent Mach number tends to increase with the mean temperature of the WHIM. This can be attributed to enhanced turbulence production relative to dissipation in particularly hot and turbulent clusters.

79 ASTRONOMY AND ASTROPHYSICS↗

Characterization of Cast U-6Nb Sprue

Shape casting of uranium-6 wt. pct. niobium (U-6Nb) can produce near net shape components, providing a higher efficiency alternative to wrought processing. A substantial amount of materials characterization in support of direct casting process development has been performed and documented. This supplemental work describes the mechanical behavior of the hot top region of shape cast U-6Nb in order to determine and quantify the effect of casting defects, such as gas porosity and inclusions, on U-6Nb performance. The annular hot top region of a hollow cylindrical casting was sectioned and metallographic, bend, and tensile specimen blanks were machined from various locations around the part. Porosity ranging from 5-13% was observed, depending on the region sampled (i.e. top, bottom or outer portion of casting). Optical and scanning electron microscopy showed prior gamma grain size ranging from <10 up to 300 μm. There are uranium oxide and carbide inclusions present at the 50-150 μm size range; these were identified based on their morphology and color. Martensitic herringbone twinning and a lamellar structure was observed as well as what may be platelets of retained $γ$° in a matrix of $α$". The tensile test specimens were lathe machined and subjected to a low temperature artificial aging heat treatment consisting of a hold at 200°C for 2 hours, followed by furnace cooling in a helium atmosphere. Quasi-static mechanical tests showed a ductile void coalescence fracture mode with failure strains from 2-16% and a linear increase in stress up to approximately 400 MPa. Prior studies on low porosity regions sampled from a similar casting reported a failure strain of 15-21% in the artificially aged condition. The significant loss in ductility in the hot top region is attributed to increased porosity.

36 MATERIALS SCIENCE↗