Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHOTOGRAPH INTERPRETATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Solar flare activity - Evidence for large-scale changes in the past

An analysis of radar and photographic meteor data and of spacecraft meteoroid-penetration data indicates that there probably has not been a large increase in meteoroid impact rates in the last 10,000 yr. The solar-flare tracks observed in the glass linings of meteoroid impact pits on lunar rock 15205 are therefore reanalyzed assuming a meteoroid flux that is constant in time. Based on this assumption, the data suggest that the production rate of Fe-group solar-flare tracks may have varied by as much as a factor of 50 on a time scale of about 10,000 yr. No independently obtained data are known to require conflict with this interpretation. Confidence in this conclusion is somewhat qualified by the experimental and analytical uncertainties involved, but the conclusion nevertheless remains the present 'best' explanation for the observed data trends.

Zook, H. A.↗

Helium mining on the Moon: Site selection and evaluation

The feasibility of recovering helium (He) from the Moon as a source of fusion energy on Earth is currently being studied at the University of Wisconsin. Part of this study is selection and evaluation of potential sites for lunar He mining. Selection and evaluation of potential mining sites are based on four salient findings by various investigators of lunar samples: (1) Regoliths from areas underlain by highland materials contain less than 20 wppm He; (2) Certain maria regoliths contain less than 20 wppm He, but other contain 25 to 49 wppm; (3) The He content of a mare regolith is a function of its composition; regoliths rich in Ti are relatively rich in He; and (4) He is concentrated in the less than 100-micron size fractions of regoliths. The first three findings suggest that maria are the most promising mining sites, specifically, those that have high-Ti regoliths. Information on the regional distribution and extent of high-Ti regoliths comes mainly from two sources: direct sampling by various Apollo and Luna missions, and remote sensing by gamma-ray spectroscopy and Earth-based measurements of lunar spectral reflectance. Sampling provides essential control on calibration and interpretation of data from remote sensing. These data indicate that Mare Tranquillitatis is the principal area of high-Ti regolith of the eastern nearside, but large areas of high-Ti regolith are indicated in the Imbrium and Procellarum regions. Recovery of significant amounts of He-3 will require mining billions of tonnes of regolith. Large individual areas suitable for mining must therefore be delineated. The concentration of He in the finer size fractions and considerations of ease of mining mean that mining areas must be as free as possible of sizable craters and blocks of rock. Pending additional lunar missions, information regarding these features must be obtained from lunar photographs, photogeologic maps, and radar surveys. The present study is decidedly preliminary; available information is much to limited to permit even a close approach to final evaluations. As a prelude to recovery of He from the Moon, systematic exploration and sampling of high-Ti regoliths should therefore have a high priority in future lunar missions.

Cameron, Eugene N.↗

Identification and interpretation of tectonic features from ERTS-A imagery

The author has identified the following significant results. When comparing the ERTS-1 imagery with the United States Air Force Operational Navigation Chart, mapping errors were found in Baja California and in the coastal islands off mainland Mexico. One dramatic error noted was the Isla Tortuga which is located 9 to 9.5 km to the west of its photo location. One ERTS-1 photo shows the size of the four islands, Isla San Juanito, Isla Maria Madre, Isla Maria Magdalena, and Isla Maria Cleofas, to be much smaller than the ONC map depicts them. A prominent zone of structural and physiographic lineaments extending approximately from San Fernando, Los Angeles County towards the Oxnard area in Ventura County in an east-north-east trend were observed. In Ventura County several previously unknown faults within this zone were identified and their traces plotted on large scale maps and 1:60,000 aerial photographs. This important fault zone is significant because it trends parallel to and partly coincides with a recent belt of seismicity related to the San Fernando 1971 earthquake.

Abdel-Gawad, M.↗

Detection and Characterization of Imperfections in Composite Pressure Vessels

The thermographic evaluation of composite structures for delaminations, disbonds, inclusions, porosity and microcracking has proven to be a valuable asset in the field of nondestructive testing. Coupling large area coverage, variable sensitivity and minimal surface contact with a photographic type image representation of structural anomalies; thermography has become a primary inspection method for composite structures. Thermography works well for locating both surface and subsurface defects in most composite systems ranging in thickness of up to 0.25 inch (0.64 cm) or more. The thermographic method for inspection of composite structures typically involves applying an external source of heat to the structure and then recording the changes in the surface heat profile manifested by embedded defects or by material property variations. If these temperature variations are large enough and an infrared camera with sufficient sensitivity is used, then the material or structural abnormality can be detected and referred back to its source. Interpreting the information given in a thermogram, can be a difficult task under ideal circumstances and extremely challenging in a real world setting. Variables including depth, thermal conductivity, orientation and size of the abnormality can all have a great influence on how its heat pattern will be seen by the imager. The work discussed in this paper illustrates how the microstructure of several commonly found defects in composite structures relate to their thermographic image counterpart. Two test cases are studied herein, including a large graphite/epoxy RP-1 fuel tank and a graphite composite cryogenic fuel feedline. The structures used in this study were designed to serve as manufacturing proof of concept specimens and to undergo hydroburst testing to verify manufacturing practices and structural design. Prior to hydrostatic testing the structures underwent 100% thermographic evaluation to ensure that no manufacturing or handling damage was present. Due to a large inclusion found in the feedline, it was pulled from service and dissected without performing the hydroproof The thermographic indications found in the RP-1 tank were below critical limits so it underwent a complete hydroproof loading series and finally a hydroburst. Following the hydroburst samples were cut from the tank in regions where thermography had located damage before the test. These regions were thermographically and then were cross-sectioned and photomicrographed.

Walker, James L.↗

Infinite possibilities: Computational structures technology

Computational Fluid Dynamics (or CFD) methods are very familiar to the research community. Even the general public has had some exposure to CFD images, primarily through the news media. However, very little attention has been paid to CST--Computational Structures Technology. Yet, no important design can be completed without it. During the first half of this century, researchers only dreamed of designing and building structures on a computer. Today their dreams have become practical realities as computational methods are used in all phases of design, fabrication and testing of engineering systems. Increasingly complex structures can now be built in even shorter periods of time. Over the past four decades, computer technology has been developing, and early finite element methods have grown from small in-house programs to numerous commercial software programs. When coupled with advanced computing systems, they help engineers make dramatic leaps in designing and testing concepts. The goals of CST include: predicting how a structure will behave under actual operating conditions; designing and complementing other experiments conducted on a structure; investigating microstructural damage or chaotic, unpredictable behavior; helping material developers in improving material systems; and being a useful tool in design systems optimization and sensitivity techniques. Applying CST to a structure problem requires five steps: (1) observe the specific problem; (2) develop a computational model for numerical simulation; (3) develop and assemble software and hardware for running the codes; (4) post-process and interpret the results; and (5) use the model to analyze and design the actual structure. Researchers in both industry and academia continue to make significant contributions to advance this technology with improvements in software, collaborative computing environments and supercomputing systems. As these environments and systems evolve, computational structures technology will evolve. By using CST in the design and operation of future structures systems, engineers will have a better understanding of how a system responds and lasts, more cost-effective methods of designing and testing models, and improved productivity. For informational and educational purposes, a videotape is being produced using both static and dynamic images from research institutions, software and hardware companies, private individuals, and historical photographs and drawings. The extensive number of CST resources indicates its widespread use. Applications run the gamut from simpler university-simulated problems to those requiring solutions on supercomputers. In some cases, an image or an animation will be mapped onto the actual structure to show the relevance of the computer model to the structure. Transferring the digital files to videotape presents a number of problems related to maintaining the quality of the original image, while still producing a broadcast quality videotape. Since researchers normally do not create a computer image using traditional composition theories or video production requirements, often the image loses some of its original digital quality and impact when transferred to videotape. Although many CST images are currently available, those that are edited into the final project must meet two important criteria: they must complement the narration, and they must be broadcast quality when recorded on videotape.

Beam, Sherilee F.↗

Application of ecological, geological and oceanographic ERTS-1 imagery to Delaware's coastal resources planning

The author has identified the following significant results. Coastal vegetation species appearing in the ERTS-1 images taken of Delaware Bay have been correlated with ground truth vegetation maps and imagery obtained from high altitude overflights. Multispectral analysis of the high altitude photographs indicated that four major vegetation communities could be clearly discriminated from 60,000 feet altitude including: (1) salt marsh cord grass; (2) salt marsh hay and spike grass; (3) reed grass; and (4) high tide bush and sea myrtle. In addition, human impact can be detected in the form of fresh water impoundments built to attract water fowl, dredge-fill operations and other alterations of the coastal environment. Overlay maps matching the USGS topographic map size of 1:24,000 have been prepared showing the four wetland vegetation communities, fresh water impoundments, and alteration of wetlands by mosquito control ditching and dredge-fill operations. Using these maps, ERTS-1 images were examined by human interpreters and automated multispectral analyzers. Major plant communities of (1) Spartina alterniflora, (2) Spartina patens and Distichlis spicata, and (3) Iva frutescens and Baccharis halimifolia can be distinguished from each other and from surrounding uplands in ERTS-1 scanner bands 6 and 7.

Klemas, V.↗

The comparative evaluation of ERTS-1 imagery for resource inventory in land use planning

The author has identified the following significant results. Multidiscipline team interpretation and mapping of resources for Crook County is nearly complete on 1:250,000 scale enlargements of ERTS-1 imagery. Maps of geology, landforms, soils and vegetation-land use are being interpreted to show limitations, suitabilities and geologic hazards for land use planning. Mapping of lineaments and structures from ERTS-1 imagery has shown a number of features not previously mapped in Oregon. A timber inventory of Ochoco National Forest has been made. Inventory of forest clear-cutting practices has been successfully demonstrated with ERTS-1 color composites. Soil tonal differences in fallow fields shown on ERTS-1 correspond with major soil boundaries in loess-mantled terrain. A digital classification system used for discriminating natural vegetation and geologic materials classes has been successful in separation of most major classes around Newberry Cauldera, Mt. Washington and Big Summit Prairie. Computer routines are available for correction of scanner data variations; and for matching scales and coordinates between digital and photographic imagery. Methods of Diazo film color printing of computer classifications and elevation-slope perspective plots with computer are being developed.

Simonson, G. H.↗

Depositional history of core 15008/7 - Some implications regarding slope processes

Structures and associated vertical changes in lithology of core 15008/7 are discussed with a view to providing data for interpretation of regolith-forming and accumulation processes that can take place on a continuous slope upon an impact-dominated surface. The light-colored soil between 49.1 and 55.6 cm in core 15007 is rich in clasts which contain abundant green glass and appears to be ejecta from downslope. The dark massive soils between 17.5 and 49.1 cm contain many crater bottom structures and crater fill, but apparently no rim-crest or proximal ejecta. The higher parts of the crater deposits appear to be removed by erosion, whereas the crater fill is preferentially preserved. Such material may be typical of slope deposits. The light-colored soil with contorted, friable clasts, between 0 and 17.5, appears to be ejecta from the crater seen in the sampling photographs.

Nagle, J. S.↗

New geomorphic data on the active Taiwan orogen: A multisource approach

A multisource and multiscale approach of Taiwan morphotectonics combines different complementary geomorphic analyses based on a new elevation model (DEM), side-looking airborne radar (SLAR), and satellite (SPOT) imagery, aerial photographs, and control from independent field data. This analysis enables us not only to present an integrated geomorphic description of the Taiwan orogen but also to highlight some new geodynamic aspects. Well-known, major geological structures such as the Longitudinal Valley, Lishan, Pingtung, and the Foothills fault zones are of course clearly recognized, but numerous, previously unrecognized structures appear distributed within different regions of Taiwan. For instance, transfer fault zones within the Western Foothills and the Central Range are identified based on analyses of lineaments and general morphology. In many cases, the existence of geomorphic features identified in general images is supported by the results of geological field analyses carried out independently. In turn, the field analyses of structures and mechanisms at some sites provide a key for interpreting similar geomorphic featues in other areas. Examples are the conjugate pattern of strike-slip faults within the Central Range and the oblique fold-and-thrust pattern of the Coastal Range. Furthermore, neotectonic and morphological analyses (drainage and erosional surfaces) has been combined in order to obtain a more comprehensive description and interpretation of neotectonic features in Taiwan, such as for the Longitudinal Valley Fault. Next, at a more general scale, numerical processing of digital elevation models, resulting in average topography, summit level or base level maps, allows identification of major features related to the dynamics of uplift and erosion and estimates of erosion balance. Finally, a preliminary morphotectonic sketch map of Taiwan, combining information from all the sources listed above, is presented.

Deffontaines, B.↗

Progress of Cometary Science in the Past 100 Years

Enormous strides made by cometary science during the 20th century defy any meaningful comparison of its state 100 years ago and now. The great majority of the subfields enjoying much attention nowadays did not exist in the year 1900. Dramatic developments, especially in the past 30-50 years, have equally affected observational and theoretical studies of comets. The profound diversification of observing techniques has been documented by the ever widening limits on the electromagnetic spectrum covered. While the time around 1900 marked an early period of slow and painful experimentation with photographic methods in cometary studies, observations of comets from the x-ray region to the radio waves have by now become routine. Many of the new techniques, and all those involved with the wavelengths shorter than about 300 nm, were made possible by another major breakthrough of this century - observing from space. Experiments on dedicated Earth-orbiting satellites as well as several deep-space probes have provided fascinating new information on the nature and makeup of comets. In broader terms, much of the progress has been achieved thanks to fundamental discoveries and major advances in electronics, whose applications resulted in qualitatively new instruments (e.g. radiotelescopes) and sensors or detectors (e.g. CCD arrays). The most universal effect on the entire cometary science, from observing to data handling to quantitative interpretations, has been, as in any other branch of science, due to the introduction of electronic computers, with their processing capabilities not only unheard of, but literally unimaginable, in the age of classical desk calculators. As if all this should not be enough, the today's generations of comet scientists have, in addition, been blessed with nature's highly appreciated cooperation. Indeed, in the span of a dozen years, between 1985 and 1997, we were privileged to witness four remarkable cometary events: (i) a return of Halley's celebrated comet; (ii) the impact of an extensively fragmented comet Shoemaker-Levy 9 into Jupiter - a once-in-a-millenium episode; (iii) a closeup, appearance of a small but very active Earth-approaching comet Hyakutake; and (iv) an unforgettable celestial show of comet Hale-Bopp, one of the brightest and the most massive comets ever observed. We have been - and for many years to come will be - harvesting scientifically lucrative findings based on the flood of data accumulated during observational campaigns organized for these and other recent objects. Our understanding of cometary phenomena will continue to grow as observing techniques are further being improved and as more sophisticated theories are being developed. Recent accomplishments achieved in the rapidly expanding field of comets are certain to stimulate the members of this astronomical community in their quest for new discoveries in the 21st century!

Sekanina, Zdenek↗

From Auroras to Sea Ice: Views From the International Space Station and Plans for International Polar Year

For more than 40 years astronauts have been observing Earth, taking photographs or digital images from their spacecraft. Today, a robust program of observation from the International Space Station (ISS) has yielded hundreds of thousands of images of the Earth s surface collected since 2001. Seeing Earth through the eyes of an astronaut is exciting to the general public, and the images are popular in classrooms. Because the ISS has an orbital inclination of 51.6 degrees (the north-south limits of the orbit are at 51.6 degrees latitude), high latitude observations are common. Some of the most striking images collected include views of polar phenomena. Astronauts routinely pass above brilliant red and green aurora; view high, wispy clouds at the top of the atmosphere; or look down on glaciers and floating ice rafts. These images, framed and captured by humans, are easily interpreted by students and teachers. Astronaut observations provide a way to visualize complicated polar phenomena and communicate about them to students of all ages. Over the next two years, astronauts aboard the ISS will formally focus their observations on polar phenomena as participants in the International Polar Year (IPY). Imagery acquisition from the ISS will be coordinated with other IPY scientists staging studies and field campaigns on the ground. The imagery collected from the ISS will be cataloged and served on NASA s web-based database of images, http://eol.jsc.nasa.gov . The website allows investigators, students and teachers to search through the imagery, assemble image datasets, and download the imagery and the metadata. We display some of the most spectacular examples of polar imagery and demonstrate NASA s database of astronaut images of Earth.

Evans, Cynthia A.↗

Survey and Chase: A New Method of Observations For The Michigan Orbital Debris Survey Telescope (MODEST)

For more than 40 years astronauts have been observing Earth, taking photographs or digital images from their spacecraft. Today, a robust program of observation from the International Space Station (ISS) has yielded hundreds of thousands of images of the Earth s surface collected since 2001. Seeing Earth through the eyes of an astronaut is exciting to the general public, and the images are popular in classrooms. Because the ISS has an orbital inclination of 51.6 degrees (the north-south limits of the orbit are at 51.6 degrees latitude), high latitude observations are common. Some of the most striking images collected include views of polar phenomena. Astronauts routinely pass above brilliant red and green aurora; view high, wispy clouds at the top of the atmosphere; or look down on glaciers and floating ice rafts. These images, framed and captured by humans, are easily interpreted by students and teachers. Astronaut observations provide a way to visualize complicated polar phenomena and communicate about them to students of all ages. Over the next two years, astronauts aboard the ISS will formally focus their observations on polar phenomena as participants in the International Polar Year (IPY). Imagery acquisition from the ISS will be coordinated with other IPY scientists staging studies and field campaigns on the ground. The imagery collected from the ISS will be cataloged and served on NASA s web-based database of images, http://eol.jsc.nasa.gov . The website allows investigators, students and teachers to search through the imagery, assemble image datasets, and download the imagery and the metadata. We display some of the most spectacular examples of polar imagery and demonstrate NASA s database of astronaut images of Earth.

Abercromby, Kira J.↗

The application of ERTS imagery to monitoring Arctic sea ice

The author has identified the following significant results. Because of the effect of sea ice on the heat balance of the Arctic and because of the expanding economic interest in arctic oil and minerals, extensive monitoring and further study of sea ice is required. The application of ERTS data for mapping ice is evaluated for several arctic areas, including the Bering Sea, the eastern Beaufort Sea, parts of the Canadian Archipelago, and the Greenland Sea. Interpretive techniques are discussed, and the scales and types of ice features that can be detected are described. For the Bering Sea, a sample of ERTS-1 imagery is compared with visual ice reports and aerial photography from the NASA CV-990 aircraft. The results of the investigation demonstrate that ERTS-1 imagery has substantial practical application for monitoring arctic sea ice. Ice features as small as 80-100 m in width can be detected, and the combined use of the visible and near-IR imagery is a powerful tool for identifying ice types. Sequential ERTS-1 observations at high latitudes enable ice deformations and movements to be mapped. Ice conditions in the Bering Sea during early March depicted in ERTS-1 images are in close agreement with aerial ice observations and photographs.

Barnes, J. C.↗

A disturbance of the ion tail of Comet Halley and the heliospheric structure as observed by Sakigake

In order to study the interaction between the solar wind measured by Sakigake and ion tail disturbances of comet Halley, more than 500 photographs of the comet taken on the ground during this apparition are surveyed. The focus of the present study is the December 31, 1985, event, when various types of disturbances occurred, including an outstanding disconnection event (DE)-like knot. Analysis of the Sakigake/IMF data reveals that comet Halley did not encounter the heliospheric neutral sheet on that day, demanding a new explanation for the DE-like event, different from the Niedner-Brandt model. During this event the comet encountered a high-speed solar wind stream from a coronal hole tongue of the sun. The event can be explained by a dynamic pressure model, according to which the DE-like plasmoid was caused by a sudden increase in the dynamic pressure of the solar wind. A result of the simulation work by Ogino is found to support this interpretation.

Saito, T.↗

Ice in space: An experimental and theoretical investigation

The thermodynamics of water ice formation was experimentally investigated under a wide variety of conditions, including those of outer space. This information, and in particular, the lifetime of ice particles as a function of solar distance is an absolute requirement for proper interpretation of photometric profiles of comets. The sublimation of ice particles in a nonequilibrium situation was studied. An oscillating fiber microbalance was used to measure the sublimation rate of water droplets (which were suspended on a long quartz fiber which was oscillating in a vacuum chamber). The influence of particle size, surface temperature, and the index refraction from simulated solar radiation were studied in relation to ice formation. Also examined was the influence of impurities (clathrates) on ice formation. Windows in the vacuum chamber allowed the ice particles to be exposed to a 1 kilowatt xenon arc lamp which was used to simulate solar radiation. Ice is proposed as a possible energy source for comets, as amorphous water ice and ammonia in low temperature and pressure environments demonstrated a clear energy release upon warming. Motion pictures of ice formation were taken and photographs are shown.

Patashnick, H.↗

HCMM and LANDSAT imagery for geological mapping in northwest Queensland

The author has identified the following significant results. Photographic prints made from negatives of day-visible and day-IR cover of selected areas were compared with enhanced color composites generated from LANDSAT computer compatible tapes and films. For geological mapping purposes, HCMM imagery is of limited value. While large scale features like the Mikadoodi anticlinorium, contrasting lithological units, and major structures may be distinguished on day-visible and day-IR cover, the spectral bands are too broad and the resolution too coarse even for regional mapping purposes. The imagery appears to be most useful for drainage studies. Where drainage is seasonal, sequential imagery permits monitoring of broad scale water movement while the day-IR imagery yields valuable information on former channels. In plains areas subject to periodic change of stream courses, comparable IR cover at a larger scale would offer considerable potential for reconstruction of former drainage patterns essential for the correct interpretation of geochemical data relative to mineral exploration.

Cole, M. M.↗

Photogeological analysis of Europan tectonic features

Preliminary photogeological analyses of the Pelorus Linea and Sidon Flexus regions of Europa were conducted to explore the proposal by Schenk that lateral motion of crustal blocks has occurred in a 'rift zone' including possible strike-slip, tension fracturing, and geometric plate rotation about an Euler pole. These analyses revealed features interpreted as tensional structures and block rotation in a strike-slip regime consistent with the Schenk hypotheses and implied the presence of at least two stages of crustal deformation consistent with a chronology developed by Lucchitta. Confirmation of regional scale Euler pole rotation was ambiguous, however. Up to 80 kilometers of possible extension was identified in the rift zone; to accommodate this, 'cryosubduction' is speculatively proposed as a mechanism for recycling Europan 'ice lithosphere'. The cumulative width of wedge-shaped bands included in the rift zone was measured and plotted versus distance from the inferred rotation pole. Three sharp decreases in the total width were noted. These occur roughly where certain triple bands cross the rift zone suggesting that the bands are structural features that predate and influence the zone. While the curve hints at one or more sinusoidal relationships consistent with rotation geometry, given the low photographic resolution and the preliminary nature of this examination the question of whether the observations represent coherent regional rotation modified by crosscutting structures or instead imply independent local rotations separated by these structures is unanswered by this analysis.

Tufts, B. R.↗

Photointerpretation of Skylab 2 multispectral camera (S-190A) data: Advance report of significant results

The author has identified the following significant results. A significant and possible major economic example of the practical value of Skylab photographs was provided by locating on Skylab Camera Station Number 4, frame 010, SL-2, an area of exposures of limestone rocks which were thought to be completely covered by volcanic rocks based upon prior mapping. The area is located less than 12 miles north of the Ruth porphyry copper deposit, White Pine County, Nevada. This is a major copper producing open pit mine owned by Kennecott Copper Corporation. Geophysical maps consisting of gravity and aeromagnetic studies have been published indicating three large positive magnetic anomalies located at the Ruth ore deposits, the Ward Mountain, not a mineralized area, and in the area previously thought to be completely covered by post-ore volcanics. Skylab photos indicate, however, that erosion has removed volcanic cover in specific sites sufficient to expose the underlying older rocks suggesting, therefore, that the volcanic rocks may not be the cause of the aeromagnetic anomaly. Field studies have verified the initial interpretations made from the Skylab photos. The potential significance of this study is that the large positive aeromagnetic anomaly suggests the presence of cooled and solidified magma below the anomalies, in which ore-bearing solutions may have been derived forming possible large ore deposits.

Jensen, M. L.↗