Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA SIMULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Scaled-down particle-in-cell simulation of cathode plasma expansion in magnetically insulated coaxial diode

The expansion of cathode plasma in magnetically insulated coaxial diode (MICD) is investigated in theory and particle-in-cell (PIC) simulation. The temperature and density of the cathode plasma are about several eV and 10{sup 13}–10{sup 16 }cm{sup −3}, respectively, and its expansion velocity is of the level of few cm/μs. Through hydrodynamic theory analysis, expressions of expansion velocities in axial and radial directions are obtained. The characteristics of cathode plasma expansion have been simulated through scaled-down PIC models. Simulation results indicate that the expansion velocity is dominated by the ratio of plasma density other than the static electric field. The electric field counteracts the plasma expansion reverse of it. The axial guiding magnetic field only reduces the radial transport coefficients by a correction factor, but not the axial ones. Both the outward and inward radial expansions of a MICD are suppressed by the much stronger guiding magnetic field and even cease.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Self-organized confinement in whole-device modeling of laboratory magnetospheres

Turbulent self-organization driven by global ideal interchange modes in a dipole-confined plasma is explored with self-consistent, whole-plasma simulations using a flux-tube averaged magnetohydrodynamic model in dipole magnetic geometry. We show the existence of robust particle pinch driven by ideal interchange-mode fluctuations, in which the particles are transported up the density gradient. It is found that the plasma profiles in a dipole field spontaneously relax to a marginally stable state as centrally peaked pressure and density are created by global interchange-mode transport.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-average-power, 100-Hz-repetition-rate, tabletop soft-x-ray lasers at sub-15-nm wavelengths

Efficient excitation of dense plasma columns at 100-Hz repetition rate using a tailored pump pulse profile produced a tabletop soft-x-ray laser average power of 0.1 mW at = 13.9 nm and 20 W at = 11.9 nm from transitions of Ni-like Ag and Ni-like Sn, respectively. Lasing on several other transitions with wavelengths between 10.9 and 14.7 nm was also obtained using 0.9-J pump pulses of 5-ps duration from a compact diode-pumped chirped pulse amplification Yb:YAG laser. Hydrodynamic and atomic plasma simulations show that the pump pulse profile, consisting of a nanosecond ramp followed by two peaks of picosecond duration, creates a plasma with an increased density of Ni-like ions at the time of peak temperature that results in a larger gain coefficient over a temporally and spatially enlarged space leading to a threefold increase in the soft-x-ray laser output pulse energy. The high average power of these compact soft-x-ray lasers will enable applications requiring high photon flux. These results open the path to milliwatt-average-power tabletop soft-x-ray lasers.

Reagan, Brendon↗

Slowly balding black holes

The 'no-hair' theorem, a key result in general relativity, states that an isolated black hole is defined by only three parameters: mass, angular momentum, and electric charge; this asymptotic state is reached on a light-crossing time scale. We find that the no-hair theorem is not formally applicable for black holes formed from the collapse of a rotating neutron star. Rotating neutron stars can self-produce particles via vacuum breakdown forming a highly conducting plasma magnetosphere such that magnetic field lines are effectively ''frozen in'' the star both before and during collapse. In the limit of no resistivity, this introduces a topological constraint which prohibits the magnetic field from sliding off the newly-formed event horizon. As a result, during collapse of a neutron star into a black hole, the latter conserves the number of magnetic flux tubes N{sub B}=e{Phi}{sub {infinity}}/({pi}c({h_bar}/2{pi})), where {Phi}{sub {infinity}}{approx_equal}2{pi}{sup 2}B{sub NS}R{sub NS}{sup 3}/(P{sub NS}c) is the initial magnetic flux through the hemispheres of the progenitor and out to infinity. We test this theoretical result via 3-dimensional general relativistic plasma simulations of rotating black holes that start with a neutron star dipole magnetic field with no currents initially present outside the event horizon. The black hole's magnetosphere subsequently relaxes to the split-monopole magnetic field geometry with self-generated currents outside the event horizon. The dissipation of the resulting equatorial current sheet leads to a slow loss of the anchored flux tubes, a process that balds the black hole on long resistive time scales rather than the short light-crossing time scales expected from the vacuum no-hair theorem.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Multi-moment advection scheme in three dimension for Vlasov simulations of magnetized plasma

We present an extension of the multi-moment advection scheme [T. Minoshima, Y. Matsumoto, T. Amano, Multi-moment advection scheme for Vlasov simulations, Journal of Computational Physics 230 (2011) 6800–6823] to the three-dimensional case, for full electromagnetic Vlasov simulations of magnetized plasma. The scheme treats not only point values of a profile but also its zeroth to second order piecewise moments as dependent variables, and advances them on the basis of their governing equations. Similar to the two-dimensional scheme, the three-dimensional scheme can accurately solve the solid body rotation problem of a gaussian profile with little numerical dispersion or diffusion. This is a very important property for Vlasov simulations of magnetized plasma. We apply the scheme to electromagnetic Vlasov simulations. Propagation of linear waves and nonlinear evolution of the electron temperature anisotropy instability are successfully simulated with a good accuracy of the energy conservation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spatial decay of electromagnetic waves from hypervelocity impact plasmas

Due to the high kinetic energy of impactors in space, hypervelocity impacts on spacecraft can ablate spacecraft material and produce plasmas. These plasmas have been observed in ground-based experiments to produce electromagnetic pulses (EMPs) and are suspected to be a cause of spacecraft anomalies. The initial EMP that is produced after plasma formation is replicated using a 2D electromagnetic plasma simulation, consisting of a discontinuous Galerkin, particle-in-cell (DG-PIC) framework. The spontaneous formation of EMPs from an initial quasineutral plasma is consistent with previous works and show behavior similar to that of waves emitted by antennas. The EMP emits from the plasma with a frequency less than the plasma frequency associated with the point of maximum density, showing the importance of the density gradient, and the far-field region of the “plasma antenna” is estimated. From the proportionality between plasma frequency and EMP frequency, there is a direct correlation between plasma density and radiation. Finally, as the plasma density decreases, the EMP frequency decreases, which suggests that several observable phenomena, such as optical flashes, radio frequency emission, and microwave emission, all result from the same plasma-related mechanism within a single hypervelocity impact.

42 ENGINEERING↗

Radio imaging of a type IVM radio burst on the 14th of August 2010

Propagating coronal mass ejections (CMEs) are often accompanied by burst signatures in radio spectrogram data. We present Nançay Radioheliograph observations of a moving source of broadband radio emission, commonly referred to as a type IV radio burst (type IVM), which occurred in association with a CME on the 14th of August 2010. The event was well observed at extreme ultraviolet (EUV) wavelengths by SDO/AIA and PROBA2/SWAP, and by the STEREO SECCHI and SOHO LASCO white light (WL) coronagraphs. The EUV and WL observations show the type IVM source to be cospatial with the CME core. The observed spectra is well fitted by a power law with a negative slope, which is consistent with optically thin gyrosynchrotron emission. The spectrum shows no turn over at the lowest Nançay frequencies. By comparing simulated gyrosynchrotron spectra with Nançay Radioheliograph observations, and performing a rigorous parameter search we are able to constrain several key parameters of the underlying plasma. Simulated spectra found to fit the data suggest a nonthermal electron distribution with a low energy cutoff of several tens to 100 keV, with a nonthermal electron density in the range 10{sup 0}-10{sup 2} cm{sup –3}, in a magnetic field of a few Gauss. The nonthermal energy content of the source is found to contain 0.001%-0.1% of the sources thermal energy content. Furthermore, the energy loss timescale for this distribution equates to several hours, suggesting that the electrons could be accelerated during the CME initiation or early propagation phase and become trapped in the magnetic structure of the CME core without the need to be replenished.

79 ASTRONOMY AND ASTROPHYSICS↗

TEMPEST Simulations of the Plasma Transport in a Single-Null Tokamak Geometry

We present edge kinetic ion transport simulations of tokamak plasmas in magnetic divertor geometry using the fully nonlinear (full-f) continuum code TEMPEST. Besides neoclassical transport, a term for divergence of anomalous kinetic radial flux is added to mock up the effect of turbulent transport. In order to study the relative roles of neoclassical and anomalous transport, TEMPEST simulations were carried out for plasma transport and flow dynamics in a single-null tokamak geometry, including the pedestal region that extends across the separatrix into the scrape-off layer and private flux region. In a series of TEMPEST simulations were conducted to investigate the transition of midplane pedestal heat flux and flow from the neoclassical to the turbulent limit and the transition of divertor heat flux and flow from the kinetic to the fluid regime via an anomalous transport scan and a density scan. The TEMPEST simulation results demonstrate that turbulent transport (as modelled by large diffusion) plays a similar role to collisional decorrelation of particle orbits and that the large turbulent transport (large diffusion) leads to an apparent Maxwellianization of the particle distribution. Moreover, we show the transition of parallel heat flux and flow at the entrance to the divertor plates from the fluid to the kinetic regime. For an absorbing divertor plate boundary condition, a non-half-Maxwellian is found due to the balance between upstream radial anomalous transport and energetic ion endloss.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion flux onto conducting and isolated surfaces in the beam-plasma discharge: Computer simulation

A physical model which allows the use of the program code KARAT for simulating the quasisteady state of the beam-plasma discharge with plasma regeneration from a neutral gas is developed. The results of simulation of the modes of discharge at different potentials at the discharge collector are reported. The results obtained for isolated and grounded ion collectors are compared.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical simulation of a plasma actuator based on ion transport

Two-dimensional numerical simulation of ion transport and flow around a single dielectric barrier discharge plasma actuator (PA) is performed. Spatial distributions of ions and electrons as well as their time evolution are obtained by solving the transport equations of monovalent positive ions, monovalent negative ions, and electrons. Voltage and frequency of the driving alternating-current signal are assumed to be 8 kV and 5 kHz, respectively. Special focus is laid upon the effect of voltage gradient dV/dt on the magnitude of the body force. The validity of steady force models often used in flow simulation is also examined. The simulation results show that the magnitude of the body force induced by the PA increases as the voltage gradient dV/dt increases and its increase rate becomes milder at higher voltage. The mechanism of body force generation is explained from the time evolution of number density fields of ions and electrons. A comparison between flow simulations using a time-resolved body force and its time-averaged counterpart demonstrates that the time-averaged model gives sufficiently accurate results when the time scale of the flow is more than 30 times greater than that of the PA.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Response to 'Comment on 'The effects of Bohm potential on ion-acoustic solitary waves interaction in a nonplanar quantum plasma'' [Phys. Plasmas 17, 114701 (2010)]

In a recent comment, M. Akbari-Moghanjoughi [Phys. Plasmas 17, 114701 (2010)] (whom we will refer to as A.M.) pointed out that in the quantum hydrodynamics plasma model the parameters p (the fractional positron to ion number density) and {sigma} (the relative positron to electron Fermi temperature) are not independent quantum plasma parameters which has important consequences on the graphical interpretations presented in our article. We agree with A.M. that the phase shift cannot be plotted in a {sigma}-p plane and the value of p=0.2 does not correspond to {sigma}=0.02. However, the main results given by formulas and the conclusion in our paper [S.-C. Li, Phys. Plasmas 17, 082307 (2010)] are independent of the figures and remain valid. To understand and interpret the results obtained in our previous article correctly, in this response, we will show some new figures and make some discusses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of beam premodulation on excitation of surface plasma waves in a magnetized plasma

A density modulated electron beam propagating through a vacuum magnetized plasma interface drives electromagnetic surface plasma waves (SPWs) to instability via Cerenkov and fast cyclotron interaction. Numerical calculations of the growth rate and unstable mode frequencies have been carried out for the typical parameters of the SPWs. The growth rate {gamma} of the unstable wave instability increases with the modulation index ({Delta}) and is maximized for {Delta}=1. For {Delta}=0, {gamma} turns out to be {approx}4.32x10{sup 10} rad/s for Cerenkov interaction and {approx}6.81x10{sup 10} rad/s for fast cyclotron interaction. The growth rate of the instability increases with the beam density and scales as one-third power of the beam density in Cerenkov interaction and is proportional to the square root of beam density in fast cyclotron interaction. In addition, the real frequency of the unstable wave increases with the beam-energy and scales as almost one-half power of the beam-energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Relativistic effects on nonlinear lower hybrid oscillations in cold plasma

Nonlinear lower hybrid mode in a quasineutral magnetized plasma is analyzed in one space dimension using Lagrangian coordinates. In a cold fluid, we treat electron fluid relativistically, whereas ion fluid nonrelativistically. The homotopy perturbation method is employed to obtain the nonlinear solution which also finds the frequency-amplitude relationship for the lower hybrid mode. The solution indicates that the amplitude of oscillation increases due to the weak relativistic effects. The appearance of density spikes is not ruled out in a magnetized plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear evolution of two fast-particle-driven modes near the linear stability threshold

A system of two coupled integro-differential equations is derived and solved for the non-linear evolution of two waves excited by the resonant interaction with fast ions just above the linear instability threshold. The effects of a resonant particle source and classical relaxation processes represented by the Krook, diffusion, and dynamical friction collision operators are included in the model, which exhibits different nonlinear evolution regimes, mainly depending on the type of relaxation process that restores the unstable distribution function of fast ions. When the Krook collisions or diffusion dominate, the wave amplitude evolution is characterized by modulation and saturation. However, when the dynamical friction dominates, the wave amplitude is in the explosive regime. In addition, it is found that the finite separation in the phase velocities of the two modes weakens the interaction strength between the modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The generation of random variates from a relativistic Maxwellian distribution

A procedure for generating random variates from a relativistic Maxwellian distribution with arbitrary temperature and drift velocity is presented. The algorithm is based on the rejection method and can be used to initialize particle velocities in kinetic simulations of plasmas and gases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of a LIBS system for in situ surface measurements during plasma exposure in PISCES-A

A laser-induced breakdown spectroscopy (LIBS) system has been developed with a Q-switched Nd:YAG laser (wavelength = 1064 nm and pulse width ~5 ns) to conduct in situ surface measurements during plasma exposure in the PISCES-A linear divertor plasma simulator. The LIBS signal enhancement is obtained with both the magnetic field normal to the surface of a target and steady-state background plasma. Migration of sputtered Ta impurities onto the neighboring Cr surface is identified during He plasma exposure, only when cone structures are formed on the Cr surface. D retention in W during D plasma exposure is observed to decrease with increasing the sample temperature. The temporal evolution of D outgassing from W is measured in a time range of ~10-420 s right after D plasma exposure. A power law fit, t - α , yields α ~ 0.34 ± 0.09, which is nearly consistent with calculated and measured values.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental Measurements of Ion Heating in Collisional Plasma Shocks and Interpenetrating Supersonic Plasma Flows

Here, we present time-resolved measurements of ion heating due to collisional plasma shocks and interpenetrating supersonic plasma flows, which are formed by the oblique merging of two coaxial-gun-formed plasma jets. Our study is repeated using four jet species: N, Ar, Kr, and Xe. In conditions with small interpenetration between jets, the observed peak ion temperature T i is consistent with the predictions of collisional plasma-shock theory showing a substantial elevation of T i above the electron temperature T e and also the subsequent decrease of T i on the classical ion-electron temperature-equilibration timescale. In conditions of significant interpenetration between jets, such that shocks do not apparently form, the observed peak T i is still appreciable and greater than T e but much lower than that predicted by collisional plasma-shock theory. Experimental results are compared with multifluid plasma simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Path Integral Monte Carlo Simulations of Iron Plasmas (Final Technical Report)

This documents is the final technical report for our grant entitled "Path Integral Monte Carlo Simulations of Iron Plasmas" that focused on developing path integral Monte Carlo (PIMC) computer simulations. This techniques will be developed to study plasmas composed of heavier elements including iron and other third row elements. Equations of state (EOS) and transport properties will be derived in the regime of warm dense matter (WDM) and dense plasmas where existing first-principles methods cannot be applied. While standard density functional theory (DFT) has been used to accurately predict the structure of many solids and liquids up to temperatures on the order of 100,000 K, this method is not applicable at much higher temperature because the number of partially occupied electronic orbitals reaches intractably large numbers or the use of finite-temperature free energy functionals in orbital-free DFT introduces an uncontrolled approximation. Here we focus on PIMC methods that become more and more efficient with increasing temperatures and still include all electronic correlation effects. In this approach, electronic excitations increase the efficiency rather than reduce it. While it had commonly been assumed this method could only be applied to elements without core electrons, we showed that PIMC with free-particle nodes works well for first-row elements (PRL 108 (2012) 115502). Most recently, we extended the applicability range of all-electron PIMC to second-row elements by adopting localized nodal surfaces (PRL 115 (2015) 176403). To simulate third-row elements efficiently under WDM conditions, we propose a new method to remove core electrons by introducing pseudo-nodes. We explain our approach step by step and present preliminary results. We focus our method development on getting PIMC simulations of iron to work because of its fundamental importance for WDM and astrophysics. Then we move on to krypton and copper-doped beryllium, a ICF ablator material. We plan to continue working on key second-row material such as Na, Mg, MgO, Al, silica, and silicon-doped plastic ablators. Our collaborators at LLNL, will use our PIMC EOS data both as comparisons to existing semi-empirical, EOS-generating schemes, and as input for continuum radiation hydrodynamics simulations. We will establish an efficient pipeline from PIMC to macroscopic continuum studies of materials response. An emphasis will be placed on benchmarking such methods for plasmas of heavy elements at the very high temperatures (~100 eV) and low densities that are generated when Hohlraum radiation heats the ablator material in indirect drive laser experiments. Results from changes to the EOS will be of immeasurable importance to the designers at the National Ignition Facility (NIF) and at other facilities. Starting with our EOS of Cu-doped Be, our second collaborator at LLE, will perform real-time simulations of laser fusion experiments at the Omega laser and at the NIF to determine how sensitive the compression path depends on the ablator EOS. Since our collaborator also has experience in performing orbital-free DFT calculations, we propose to compare predictions from this method with PIMC results. In joint publications, we plan to analyze the accuracy of different free-energy functionals in order to understand why existing orbital-free DFT calculations do not predict compression peaks along the shock Hugoniot curve that we see with PIMC. The peaks are caused by the ionization of various electron shells. Their accurate characterization is important to compare with experimental results. We will break new ground by developing PIMC techniques that can simulate iron and all other third row elements in the plasma and WDM regimes. We introduce the concept of pseudo-nodes for the efficient treatment of the core-electrons. The EOS and transport properties will be derived and published online in the form of a new WDM database. Our PIMC EOS calculations will benchmark and possibly replace semi-analytical EOS tables like QEOS or SESAME, which will impact the hydrocode simulation community and will affect the design of NIF targets. Our PIMC results will help to improve the accuracy of orbital-free DFT simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗