Development of an Aerodynamic Method and Database for the SLS Service Module Panel Jettison Event Utilizing Inviscid CFD and MATLAB
No abstract available
Applebaum, Mike↗
SEARCH · Search NASA
Results for “Panel method”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Panel Flutter and Sonic Fatigue Analysis for RLV
A methodology is presented for the flutter analysis of the seal of thermal protection system (TPS) panel of X-33 Advanced Technology Demonstrator test vehicle. The seal is simulated as a two-dimensional cantilevered panel with an elastic stopper, which is modeled as an equivalent spring. This cantilever beam-spring model under the aerodynamic pressure at supersonic speeds turns out to be an impact nonlinear dynamic system. The flutter analysis of the seal is thus carried out using, time domain numerical simulation with a displacement stability criterion. The flutter boundary of the seal is further verified with a family of three traditional and one nontraditional panel flutter models. The frequency domain method that applies eigenanalysis on the traditional panel flutter problem was used. The results showed that the critical dynamic pressure could be more than doubled with properly chosen material for the base stopper. The proposed methodology can be easily extended to three-dimensional panel seals with flow angularity.
Mei, Chuh↗
Application of the finite element method in the calculation of transmission loss of flat and curved panels
This investigation represents an extension of a study of Roussos (1985) who considered the noise transmission loss of a rectangular plate in an infinite baffle. Roussos, who employed an analytical formulation, considered an unstiffened plate. While it is difficult to consider stiffeners by means of analytical methods, the difficulties can be avoided by employing a finite element procedure. For this reason, the present study is concerned with the implementation of a finite element method. The representation of the panel transmission loss is discussed, and the determination of the panel motion by means of the finite element technique is described, taking into account an isotropic flat panel, the exciting force, an eigenvalue problem, the radiation pressure, a plate element, and a cylindrical shell element. Numerical results are considered for a flat panel, a curved panel, and a stiffened flat panel.
Koval, L. R.↗
Mask Free OLED Fabrication Process for Non-Tunable and Tunable White OLED Panels
In this program we demonstrated a method for mask free fabrication of OLEDs. Conventional OLEDs use at least 2 shadowmasks during the fabrication process to define the deposition pattern for the organic layers and for the cathode layer. Although effective, the use of masks requires mask handling and mask change equipment which increases the cost of the OLED deposition system. New sets of masks are required for every new product design, and the mask sets require frequent cleaning as organic material builds up on the masks over time and can be a source of particle defects resulting in yield loss. The method investigated in this program uses laser removal of organic material to pattern the organic layers and define a moisture impermeable seal region. This method is digital and can be applied to any new panel design, avoiding the costs of new masks sets and associated yield loss. In addition, we developed a platform technology for producing white color tunable or dim-to-warm white OLEDs and demonstrated patterning of tunable white OLEDs using the low-cost mask free fabrication process.
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
A panel space for RFI shielding gaskets: A concept
Method for spacing and shielding console chasis from panel is described. Small Teflon buttons are force-fitted into standard holes in console.
Goins, W. T.↗
Radiated Sound Power from a Curved Honeycomb Panel
The validation of finite element and boundary element model for the vibro-acoustic response of a curved honeycomb core composite aircraft panel is completed. The finite element and boundary element models were previously validated separately. This validation process was hampered significantly by the method in which the panel was installed in the test facility. The fixture used was made primarily of fiberboard and the panel was held in a groove in the fiberboard by a compression fitting made of plastic tubing. The validated model is intended to be used to evaluate noise reduction concepts from both an experimental and analytic basis simultaneously. An initial parametric study of the influence of core thickness on the radiated sound power from this panel, using this numerical model was subsequently conducted. This study was significantly influenced by the presence of strong boundary condition effects but indicated that the radiated sound power from this panel was insensitive to core thickness primarily due to the offsetting effects of added mass and added stiffness in the frequency range investigated.
Robinson, Jay H.↗
Microwave and Millimeter Wave Imaging Using Synthetic Aperture Focusing and Holographical Techniques
Microwave and millimeter wave nondestructive testing and evaluation (NDT&E) methods have shown great potential for determining material composition in composite structures, determining material thickness or debond thickness between two layers, and determining the location and size of flaws, defects, and anomalies. The same testing methods have also shown great potential to produce relatively high-resolution images of voids inside Spray On Foam Insulation (SOFI) test panels using real focused methods employing lens antennas. An alternative to real focusing methods are synthetic focusing methods. The essence of synthetic focusing is to match the phase of the scattered signal to measured points spaced regularly on a plane. Many variations of synthetic focusing methods have already been developed for radars, ultrasonic testing applications, and microwave concealed weapon detection. Two synthetic focusing methods were investigated; namely, a) frequency-domain synthetic aperture focusing technique (FDSAFT), and b) wide-band microwave holography. These methods were applied towards materials whose defects were of low dielectric contrast like air void in SOFI. It is important to note that this investigation used relatively low frequencies from 8.2 GHz to 26.5 GHz that are not conducive for direct imaging of the SOFI. The ultimate goal of this work has been to demonstrate the capability of these methods before they are applied to much higher frequencies such as the millimeter wave frequency spectrum (e.g., 30-300 GHz).
Case, Joseph Tobias↗
Special Course on Engineering Methods in Aerodynamic Analysis and Design of Aircraft
Lecture notes for the AGARD Fluid Dynamics Panel Special Course on 'Engineering Methods in Aerodynamic Analysis and Design of Aircraft' have been assembled in this report. Proven engineering methods used during conceptual and preliminary design and development of new aircraft concepts are presented. These methods focus on simple computational procedures for conceptual and preliminary design, low level analysis computer codes, and experimental techniques for aircraft performance predictions. The course was aimed at helping train young engineers to appreciate and work with simple engineering tools to enhance the art of cost effective preliminary design of new aircraft.
aerodynamics↗
Active control of sound radiation from a vibrating rectangular panel by sound sources and vibration inputs - An experimental comparison
Active control of sound radiation from a rectangular panel by two different methods has been experimentally studied and compared. In the first method a single control force applied directly to the structure is used with a single error microphone located in the radiated acoustic field. Global attenuation of radiated sound was observed to occur by two main mechanisms. For 'on-resonance' excitation, the control force had the effect of increasing the total panel input impedance presented to the nosie source, thus reducing all radiated sound. For 'off-resonance' excitation, the control force tends not significantly to modify the panel total response amplitude but rather to restructure the relative phases of the modes leading to a more complex vibration pattern and a decrease in radiation efficiency. For acoustic control, the second method, the number of acoustic sources required for global reduction was seen to increase with panel modal order. The mechanism in this case was that the acoustic sources tended to create an inverse pressure distribution at the panel surface and thus 'unload' the panel by reducing the panel radiation impedance. In general, control by structural inputs appears more effective than control by acoustic sources for structurally radiated noise.
Fuller, C. R.↗
Optimization of composite sandwich cover panels subjected to compressive loadings
An analysis and design method is presented for the design of composite sandwich cover panels that includes transverse shear effects and damage tolerance considerations. This method is incorporated into an optimization program called SANDOP (SANDwich OPtimization). SANDOP is used in the present study to design optimized composite sandwich cover panels for transport aircraft wing applications as a demonstration of its capabilities. The results of this design study indicate that optimized composite sandwich cover panels have approximately the same structural efficiency as stiffened composite cover panels designed to identical constraints. Results indicate that inplane stiffness requirements have a large effect on the weight of these composite sandwich cover panels at higher load levels. Increasing the maximum allowable strain and the upper percentage limit of the 0 degree and plus or minus 45 degree plies can yield significant weight savings. The results show that the structural efficiency of these optimized composite sandwich cover panels is relatively insensitive to changes in core density.
Cruz, Juan R.↗
Calculations of axisymmetric vortex sheet roll-up using a panel and a filament model
A method for calculating the self-induced motion of a vortex sheet using discrete vortex elements is presented. Vortex panels and vortex filaments are used to simulate two-dimensional and axisymmetric vortex sheet roll-up. A straight forward application using vortex elements to simulate the motion of a disk of vorticity with an elliptic circulation distribution yields unsatisfactroy results where the vortex elements move in a chaotic manner. The difficulty is assumed to be due to the inability of a finite number of discrete vortex elements to model the singularity at the sheet edge and due to large velocity calculation errors which result from uneven sheet stretching. A model of the inner portion of the spiral is introduced to eliminate the difficulty with the sheet edge singularity. The model replaces the outermost portion of the sheet with a single vortex of equivalent circulation and a number of higher order terms which account for the asymmetry of the spiral. The resulting discrete vortex model is applied to both two-dimensional and axisymmetric sheets. The two-dimensional roll-up is compared to the solution for a semi-infinite sheet with good results.
Kantelis, J. P.↗
Optimization of composite sandwich cover panels subjected to compressive loadings
An analysis and design method is presented for the design of composite sandwich cover panels that include the transverse shear effects and damage tolerance considerations. This method is incorporated into a sandwich optimization computer program entitled SANDOP. As a demonstration of its capabilities, SANDOP is used in the present study to design optimized composite sandwich cover panels for for transport aircraft wing applications. The results of this design study indicate that optimized composite sandwich cover panels have approximately the same structural efficiency as stiffened composite cover panels designed to satisfy individual constraints. The results also indicate that inplane stiffness requirements have a large effect on the weight of these composite sandwich cover panels at higher load levels. Increasing the maximum allowable strain and the upper percentage limit of the 0 degree and +/- 45 degree plies can yield significant weight savings. The results show that the structural efficiency of these optimized composite sandwich cover panels is relatively insensitive to changes in core density. Thus, core density should be chosen by criteria other than minimum weight (e.g., damage tolerance, ease of manufacture, etc.).
Cruz, Juan R.↗
Thermal Buckling Analysis of Rectangular Panels Subjected to Humped Temperature Profile Heating
This research investigates thermal buckling characteristics of rectangular panels subjected to different types of humped temperature profile heating. Minimum potential energy and finite-element methods are used to calculate the panel buckling temperatures. The two methods give fairly close thermal buckling solutions. 'Buckling temperature magnification factor of the first kind, eta' is established for the fixed panel edges to scale up the buckling solution of uniform temperature loading case to give the buckling solution of the humped temperature profile loading cases. Also, 'buckling temperature magnification factor of the second kind, xi' is established for the free panel edges to scale up the buckling solution of humped temperature profile loading cases with unheated boundary heat sinks to give the buckling solutions when the boundary heat sinks are heated up.
Ko, William I.↗
Measurement of transmission loss characteristics using acoustic intensity techniques at the KU-FRL Acoustic Test Facility
The transmission loss characteristics of panels using the acoustic intensity technique is presented. The theoretical formulation, installation of hardware, modifications to the test facility, and development of computer programs and test procedures are described. A listing of all the programs is also provided. The initial test results indicate that the acoustic intensity technique is easily adapted to measure transmission loss characteristics of panels. Use of this method will give average transmission loss values. The fixtures developed to position the microphones along the grid points are very useful in plotting the intensity maps of vibrating panels.
Roskam, J.↗
Fluidic actuator system and method
A pneumatically actuated solar panel array system that includes a plurality of separate actuator assemblies that each have a top plate and bottom plate and a first and second bellows that each extend between and are coupled to the top and bottom plates at a respective top head and bottom head, the first and second bellows being configured to be separately pneumatically inflated, where the pneumatic inflation expands the bellows along a length. The pneumatically actuated solar panel array system can also include a plurality of solar panels coupled to the actuator assemblies with the solar panels being configured to be actuated based on inflation of one or more bellows associated with the plurality of actuator assembles.
14 SOLAR ENERGY↗
Sandwich panels with battery cores
Systems and methods are disclosed for enhancing the construction and application of batteries by providing a battery system comprising at least one electrochemical panel with at least one electrochemical cell disposed therein, which is configured to enable multi-purpose functionality and applicability of the battery system. Embodiments provide for electrodes and/or current collectors of each electrochemical cell that are transversely orientated with respect to each face of an electrochemical panel. Some embodiments provide for a separator pouch disposed about at least one electrode and/or current collector to electrically insulate the electrode and/or current collector from a structure component of the device. Each electrochemical panel is configured to enable electrical communication with another electrochemical panel and/or an ancillary electric circuit. Each electrochemical panel is configured enable utilization thereof as a structural component of an ancillary structure.
Rahn, Christopher D.↗
Fluidic actuator system and method
A pneumatically actuated solar panel array system that includes a plurality of separate actuator assemblies that each have a top plate and bottom plate and a first and second bellows that each extend between and are coupled to the top and bottom plates at a respective top head and bottom head, the first and second bellows being configured to be separately pneumatically inflated, where the pneumatic inflation expands the bellows along a length. The pneumatically actuated solar panel array system can also include a plurality of solar panels coupled to the actuator assemblies with the solar panels being configured to be actuated based on inflation of one or more bellows associated with the plurality of actuator assembles.
14 SOLAR ENERGY↗
Critical Literature Review of Quantitative Sustainability Assessment Methods for the Circular Economy
The circular economy (CE) has been proposed to be an operational framework for sustainable development that decouples economic growth from resource consumption. The CE ambition is to maximize the retention of value in products, materials, and resources in the economy over time with the help of CE strategies such as selling a service rather than a product, reusing and repairing products or their components, and recycling. The social, economic, and environmental performances of CE strategies need to be measured against their linear counterparts to avoid strategies that increase circularity but have other unintended externalities. However, there is currently no tool specifically designed to compare circular to linear systems and, thus, various methods from different fields have been applied. This session aims at reviewing, contrasting, and critiquing different methods that have been applied to assess the CE until now, along with an up to date state of the science in this field. Methods from the industrial ecology field have most often been applied to study the CE. However, the transition to CE involves both technological improvements as well as social changes. New business models such as collaborative consumption models (e.g., Uber or Airbnb) are examples of the new patterns of production and consumption of the CE, which may be difficult to analyze from a purely industrial ecology perspective. Methods from complexity science and humanities could therefore complement the industrial ecology perspective to extend the scope of the analysis. Such an approach could also answer a longstanding criticism of the CE which, in contrast with sustainability, solely focuses on the environment and the economy. Moreover, the hybridization of two or more existing methods can yield additional capabilities, which may enable the exploration of additional CE-related research questions. The 90 minutes session will have several presentations and conclude with a moderated, interactive panel discussion on how methods from different fields could be combined to harness their relative strengths.
circular economy↗