Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particle methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Wafer-based charged particle accelerator, wafer components, methods, and applications

A wafer-based charged particle accelerator includes a charged particle source and at least one RF charged particle accelerator wafer sub-assembly and a power supply coupled to the at least one RF charged particle accelerator wafer sub-assembly. The wafer-based charged particle accelerator may further include a beam current-sensor. The wafer-based charged particle accelerator may further include at least a second RF charged particle accelerator wafer sub-assembly and at least one ESQ charged particle focusing wafer. Fabrication methods are disclosed for RF charged particle accelerator wafer sub-assemblies, ESQ charged particle focusing wafers, and the wafer-based charged particle accelerator.

Lal, Amit↗

Simulation of low frequency Buneman instability of a current-driven plasma by particle in cell method

The nonlinear dynamics of low frequency Buneman instability in a current-driven cold unmagnetized plasma are studied using particle in cell simulation. Simulations of the Buneman instability show that the electron density profile has sharp peaks and the amplitude of the peaks changes with time. Also, the nonlinear evolution of this instability and saturation time is investigated by the time variation of the electric potential energy in the plasma. Moreover, the electron trapping phenomena and the formation of phase space electron holes are presented by considering the phase space diagram and electron distribution function. Finally, the ion mass effect on saturation time is investigated and it is found that the saturation time increases by increasing the ion mass and the saturation level is not very sensitive to the ion mass.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nanolipoprotein particles and related methods and systems for protein capture, solubilization, and/or purification

Provided herein are methods and systems for assembling, solubilizing and/or purifying a membrane associated protein in a nanolipoprotein particle, which comprise a temperature transition cycle performed in presence of a detergent, wherein during the temperature transition cycle the nanolipoprotein components are brought to a temperature above and below the gel to liquid crystalling transition temperature of the membrane forming lipid of the nanolipoprotein particle.

59 BASIC BIOLOGICAL SCIENCES↗

Methods for forming particles

Single source precursors or pre-copolymers of single source precursors are subjected to microwave radiation to form particles of a I-III-VI.sub.2 material. Such particles may be formed in a wurtzite phase and may be converted to a chalcopyrite phase by, for example, exposure to heat. The particles in the wurtzite phase may have a substantially hexagonal shape that enables stacking into ordered layers. The particles in the wurtzite phase may be mixed with particles in the chalcopyrite phase (i.e., chalcopyrite nanoparticles) that may fill voids within the ordered layers of the particles in the wurtzite phase thus produce films with good coverage. In some embodiments, the methods are used to form layers of semiconductor materials comprising a I-III-VI.sub.2 material. Devices such as, for example, thin-film solar cells may be fabricated using such methods.

14 SOLAR ENERGY↗

Nanolipoprotein particles and related methods and systems for protein capture, solubilization, and/or purification

Provided herein are methods and systems for assembling, solubilizing and/or purifying a membrane associated protein in a nanolipoprotein particle, which comprise a temperature transition cycle performed in presence of a detergent, wherein during the temperature transition cycle the nanolipoprotein components are brought to a temperature above and below the gel to liquid crystalling transition temperature of the membrane forming lipid of the nanolipoprotein particle.

Chromy, Brett A.↗

Nanolipoprotein particles and related methods and systems for protein capture, solubilization, and/or purification

Provided herein are methods and systems for assembling, solubilizing and/or purifying a membrane associated protein in a nanolipoprotein particle, which comprise a temperature transition cycle performed in presence of a detergent, wherein during the temperature transition cycle the nanolipoprotein components are brought to a temperature above and below the gel to liquid crystalling transition temperature of the membrane forming lipid of the nanolipoprotein particle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Charged particle detectors with active detector surface for partial energy deposition of the charged particles and related methods

A radiation detector is disclosed. The radiation detector comprises an active detector surface configured to generate charge carriers in response to charged particles associated with incident radiation. The active detector surface is further configured with a sufficient thickness for a partial energy deposition of the charged particles to occur and permit the charged particles to pass through the active detector surface. The radiation detector further comprises a plurality of voltage leads coupled to the active detector surface. The plurality of voltage leads is configured to couple to a voltage source to generate a voltage drop across the active detector surface and to separate the charge carriers into a plurality of electrons and holes for detection. The active detector surface may comprise one or more graphene layers. Timing data between active detector surfaces may be used to determine energy of the incident radiation. Other apparatuses and methods are disclosed herein.

47 OTHER INSTRUMENTATION↗

Evaluation of two-particle properties within finite-temperature self-consistent one-particle Green’s function methods: Theory and application to GW and GF2

One-particle Green’s function methods can model molecular and solid spectra at zero or non-zero temperatures. One-particle Green’s functions directly provide electronic energies and one-particle properties, such as dipole moment. However, the evaluation of two-particle properties, such as $\langle$S 2 $\rangle$ and $\langle$N 2 $\rangle$, can be challenging because they require a solution of the computationally expensive Bethe–Salpeter equation to find two-particle Green’s functions. We demonstrate that the solution of the Bethe–Salpeter equation can be completely avoided. Applying the thermodynamic Hellmann–Feynman theorem to self-consistent one-particle Green’s function methods, we derive expressions for two-particle density matrices in a general case and provide explicit expressions for GF2 and GW methods. Such density matrices can be decomposed into an antisymmetrized product of correlated one-electron density matrices and the two-particle electronic cumulant of the density matrix. Cumulant expressions reveal a deviation from ensemble representability for GW, explaining its known deficiencies. We analyze the temperature dependence of $\langle$S 2 $\rangle$ and $\langle$N 2 $\rangle$ for a set of small closed-shell systems. Interestingly, both GF2 and GW show a non-zero spin contamination and a non-zero fluctuation of the number of particles for closed-shell systems at the zero-temperature limit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulation of filamentation instability of a current-carrying plasma by particle in cell method

The nonlinear dynamics of filamentation instability in a weakly ionized current-carrying plasma in the diffusion frequency region is studied using particle in cell simulation. The effects of electron thermal motion and ion-neutral collision on the evolution of this instability in the nonlinear stage of the filaments coalescence are discussed. It is found that the coalescence of the current filaments is enhanced by increasing the temperature and is delayed by increasing the collision frequency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In situ particle advection via parallelizing over particles

We extend the method for particle advection that parallelizes over particles to work in an in situ setting. We then compare our method with the typical method for in situ, parallelizing over data. Our experiments consist of parallelism at 512 cores, a data set with 67 million cells, and ten billion total advection steps. Our findings show that parallelizing over particles can be more than ten times faster for some workloads, for reasonable memory cost. Overall, the significance of these findings is to demonstrate that moving data can be worthwhile in some in situ settings.

Pugmire, Dave↗

Investigating ICRF Core Physics with a Hybrid Method using {delta}f Particles

Particle-in-cell simulations of ICRF core physics yield a significant amount of noise that can overwhelm the low amplitude signals associated with ICRH. To overcome this noise, we employ a hybrid approach that uses a fluid model for electrons and the delta-f particle-in-cell (DFPIC) method for ions. Noise is reduced to a level well below the amplitude of the signal and time steps are permitted to go beyond the electron time scales. With this formulation we have explored minority heating scenarios in Alcator C-Mod and high harmonic heating scenarios in NSTX. We can also employ the fluid model for both electrons and ions to investigate cold plasma scenarios. Here we examine ion test particles with particular attention paid to particle paths near resonance layers. We present our technique for investigating full particle orbits from a single toroidal mode expansion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Particle decays of levels in N 11 , 12 and O 12 investigated with the invariant-mass method

Particle-decaying states of the light nuclei 11,12 N and 12 O were studied using the invariant-mass method. The decay energies and intrinsic widths of a number of states were measured, and the momentum correlations of three-body decaying states were considered. A second $2p$-decaying 2 + state of 12 O was observed for the first time, and a higher-energy 12 O state was observed in the 4$p$+2α decay channel. This 4$p$+2α channel also contains contributions from fissionlike decay paths, including 6 Beg.s.+6Be g.s. . Analogs to these states in 12 O were found in 12 N in the 2$p$+ 10 B and 2$p$+α+ 6 Li channels. The momentum correlations for the prompt 2$p$ decay of 12 O g.s. were found to be nearly identical to those of 16 Ne g.s. , and the correlations for the new 2 + state were found to be consistent with sequential decay through excited states in 11 N. The momentum correlations for the 2$^+_1$ state in 12 O provide a new value for the 11 N ground-state energy. Finally, the states in 12 N/ 12 O that belong to the A=12 isobaric sextet do not deviate from the quadratic isobaric multiplet mass equation form

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Methods for obtaining true particle size distributions from cross section measurements

Sectioning methods are frequently used to measure grain sizes in materials. These methods do not provide accurate grain sizes for two reasons. First, the sizes of features observed on random sections are always smaller than the true sizes of solid spherical shaped objects, as noted by Wicksell [1]. This is the case because the section very rarely passes through the center of solid spherical shaped objects randomly dispersed throughout a material. The sizes of features observed on random sections are inversely related to the distance of the center of the solid object from the section [1]. Second, on a plane section through the solid material, larger sized features are more frequently observed than smaller ones due to the larger probability for a section to come into contact with the larger sized portion of the spheres than the smaller sized portion. As a result, it is necessary to find a method that takes into account these reasons for inaccurate particle size measurements, while providing a correction factor for accurately determining true particle size measurements. I present a method for deducing true grain size distributions from those determined from specimen cross sections, either by measurement of equivalent grain diameters or linear intercepts.

36 MATERIALS SCIENCE↗

Particle Capture Devices and Methods of Use Thereof

The present invention provides a device and methods of use thereof in microscale particle capturing and particle pairing. This invention provides particle patterning device, which mechanically traps individual particles within first chambers of capture units, transfer the particles to second chambers of opposing capture units, and traps a second type of particle in the same second chamber. The device and methods allow for high yield assaying of trapped cells, high yield fusion of trapped, paired cells, for controlled binding of particles to cells and for specific chemical reactions between particle interfaces and particle contents. The device and method provide means of identification of the particle population and a facile route to particle collection.

Voldman, Joel↗

Synthesis and characterization of CuO nano particles using precipitation method

A simple and efficient synthesis of CuO nanoparticles was carried out by precipitation method using copper metal chips as precursor and sodium hydroxide as a stabilizing agent at different calcinations temperatures (100°C, 150°C, and 175°C). The products were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier Transform Infrared Spectroscopy (FTIR). XRD indicated monoclinic structure of CuO. SEM indicated the variation in nanostructures with the heating temperatures and FTIR inidcated Cu-O stretching frequencies. The CuO nanostructures with the average particle size of about 16.52 nm were prepared at 100°C for 3 hr. When the calcinations temperature was increased to 150°C and 175°C, CuO nanostructures with the particle size of about 17.41 nm, and 18.44 nm were obtained respectively. This aqueous precipitation method can give a large scale production of CuO nanoparticles easily.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation of gold nanoparticles and determination of their particles size via different methods

Graphical abstract: Preparation of gold nanoparticles via NaBH{sub 4} reduction method, and determination of their particle size, size distribution and morphology by using different techniques. - Highlights: • Gold nanoparticles were synthesized by NaBH{sub 4} reduction method. • Excess of reducing agent leads to tendency of aggregation. • The particle size, size distribution and morphology were investigated. • Particle size was determined both experimentally as well as theoretically. - Abstract: Gold nanoparticles have been used in various applications covering both electronics, biosensors, in vivo biomedical imaging and in vitro biomedical diagnosis. As a general requirement, gold nanoparticles should be prepared in large scale, easy to be functionalized by chemical compound of by specific ligands or biomolecules. In this study, gold nanoparticles were prepared by using different concentrations of reducing agent (NaBH{sub 4}) in various formulations and their effect on the particle size, size distribution and morphology was investigated. Moreover, special attention has been dedicated to comparison of particles size measured by various techniques, such as, light scattering, transmission electron microscopy, UV spectrum using standard curve and particles size calculated by using Mie theory and UV spectrum of gold nanoparticles dispersion. Particle size determined by various techniques can be correlated for monodispersed particles and excess of reducing agent leads to increase in the particle size.

36 MATERIALS SCIENCE↗

Measuring momentum for charged particle tomography

Methods, apparatus and systems for detecting charged particles and obtaining tomography of a volume by measuring charged particles including measuring the momentum of a charged particle passing through a charged particle detector. Sets of position sensitive detectors measure scattering of the charged particle. The position sensitive detectors having sufficient mass to cause the charged particle passing through the position sensitive detectors to scatter in the position sensitive detectors. A controller can be adapted and arranged to receive scattering measurements of the charged particle from the charged particle detector, determine at least one trajectory of the charged particle from the measured scattering; and determine at least one momentum measurement of the charged particle from the at least one trajectory. The charged particle can be a cosmic ray-produced charged particle, such as a cosmic ray-produced muon. The position sensitive detectors can be drift cells, such as gas-filled drift tubes.

Morris, Christopher↗

Methods for Modeling Particle Impingement in Solid Rocket Motor Nozzles

This paper describes several approaches available to analysts to capture the mechanical erosion effects of alumina droplet impingement in solid rocket motor nozzles. Supersonic alumina impingement is of great interest to solid rocket motor analysts, as it can be one of the main contributors to overall nozzle erosion, particularly in nozzles with highly contoured exit cones. An overview of the basic concepts of mechanical impingement is provided, along with discussion on some of the various methods available, ranging from the purely empirical to more physics-based techniques, and their respective advantages and disadvantages.

William Allen Till↗