Search NASA⌕ Search

SEARCH · Search NASA

Results for “Penetration depth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Sunlight penetration through the Martian polar caps: Effects on the thermal and frost budgets

An energy balance model of the seasonal polar caps on Mars is modified to include penetration of solar radiation into and through the ice. Penetration of solar radiation has no effect on subsurface temperature or total frost sublimation if seasonal ice overlies a dust surface. An effect is noted for seasonal ice which overlies the residual polar caps. For the case of an exposed water-ice residual polar cap, the temperature at depth is calculated to be up to several degrees warmer and the calculated lifetime of seasonal CO2 frost is slightly lower when penetration of sunlight is properly treated in the model. For the case of a residual polar cap which is perennially covered by CO2 frost, the calculated lifetime of seasonal CO2 frost is very slightly increased as a result of sunlight penetration through the ice. Hence, penetration of sunlight into the ice helps to stabilize the observed dichotomy in the residual polar caps on Mars, although it is a small effect.

Lindner, Bernhard Lee↗

Sunlight penetration through the Martian polar caps - Effects on the thermal and frost budgets

An energy balance model of the seasonal polar caps on Mars is modified to include penetration of solar radiation into and through the ice. Penetration of solar radiation has no effect on subsurface temperature or total frost sublimation if seasonal ice overlies a dust surface. An effect is noted for seasonal ice which overlies the residual polar caps. For the case of an exposed water-ice residual polar cap, the temperature at depth is calculated to be up to several degrees warmer, and the calculated lifetime of seasonal CO2 frost is slightly lower when penetration of sunlight is properly treated in the model. For the case of a residual polar cap which is perennially covered by CO2 frost, the calculated lifetime of seasonal CO2 frost is very slightly increased as a result of sunlight penetration through the ice. Hence, penetration of sunlight into the ice helps to stabilize the observed dichotomy in the residual polar caps on Mars, although it is a small effect.

Lindner, Bernhard L.↗

The crack-contact and the free-end problem for a strip under residual stress

The plane problem for an infinite strip with two edge cracks under a given state of residual stress is considered. The residual stress is compressive near and at the surfaces and tensile in the interior of the strip. If the crack is deep enough to penetrate into the tensile zone, then the problem is one of crack-contact where the depth of the contact area is an unknown which depends on the crack depth and the residual stress profile. The problem has applications to the static fatigue of glass plates and is solved for three typical residual-stress profiles. In the limiting case of the crack's crossing the entire plate thickness, the problem becomes a stressfree end problem for a semiinfinite strip under a given residual-stress state away from the end. This is a typical stress diffusion problem in which decay behavior of the residual stress near and the nature of the normal displacement at the end of the semiinfinite strip are of special interest. For two typical residual-stress states the solution is obtained, and some numerical results are given.

Bakioglu, M.↗

A Simulation of Biological Prosesses in the Equatorial Pacific Warm Pool at 165 deg E

A nine-year simulation (1984-1992) of biological processes in the equatorial Pacific Warm Pool is presented. A modified version of the 4-component (phytoplankton, zooplankton, nitrate and ammonium) ecosystem model by McClain et al. (1996) is used. Modifications include use of a spectral model for computation of PAR and inclusion of fecal pellet remineralization and ammonium nitrification. The physical parameters (horizontal and vertical velocities and temperature) required by the ecosystem model were derived from an improved version of the Gent and Cane (1990) ocean general circulation model (Murtugudde and Busalacchi, 1997). Surface downwelling spectral irradiance was estimated using the clear-sky models of Frouin et al. (1989) and Gregg and Carder (1990) and cloud cover information from the International Satellite Cloud Climatology Project (ISCCP). The simulations indicate considerable variability on interannual time scales in all four ecosystem components. In particular, surface chlorophyll concentrations varied by an order of magnitude with maximum values exceeding 0.30 mg/cu m in 1988, 1989, and 1990, and pronounced minimums during 1987 and 1992. The deep chlorophyll maximum ranged between 75 and 125 meters with values occasionally exceeding 0.40 mg/cu m. With the exception of the last half of 1988, surface nitrate was always near depletion. Ammonium exhibited a subsurface maximum just below the DCM with concentrations as high as 0.5 mg-atN/cu m . Total integrated annual primary production varied between 40 and 250 gC/sq m/yr with an annual average of 140 gC/sq m/yr. Finally, the model is used to estimate the mean irradiance at the base of the mixed layer, i.e., the penetration irradiance, which was 18 Watts/sq m over the nine year period. The average mixed layer depth was 42 m.

McClain, Charles R.↗

Petrologic constraints on the surface processes on asteroid 4 Vesta and on excavation depths of diogenite fragments

The eucrite-howardite-diogenite meteorite groups are though to be related by magmatic processes. Asteroid 4 Vesta has been proposed as the parent body for these basaltic achondrite meteorites. The similarity of the planetesimal's surface composition to eucrite and diogenite meteorites and the large size of the asteroid (r = 250 km) make it an attractive source, but its position in the asteroid belt far from the known resonances from which meteorites originate make a relation between Vesta and eucrite-howardite-giogenite group problematic. It has been proposed that diogenites are low-Ca pyroxene-rich cumulates that crystallized from a magnesian parent (identified in howardite breccias), and this crystallization process led to evolved eucrite derivative magmas. This eucrite-diogenite genetic relationship places constraints on the physical conditions under which crystallization occurred. Elevated pressure melting experiments on magnesian eucrite parent compositions show that the minimum pressure at which pyroxene crystallization could lead to the observed compositions of main series eucrites is 500 bars, equivalent to a depth of 135 km in a 4 Vesta-sized eucrite parent body. Therefore, the observation of diogenite on the surface of 4 Vesta requires a post-crystallization process that excavates diogenite cumulate from depth. The discovery of diogenite asteroidal fragments is consistent with an impact event on 4 Vesta that penetrated the deep interior of this planetesimal.

Grove, T. L.↗

Initial Assessment of the Excavation and Deposition of Impact Lithologies Exposed by the Chicxulub Scientific Drilling Project, Yaxcopoil, Mexico

The Chicxulub Scientific Drilling Project (www.icdp-online.de) recovered a continuous core from a depth of 404 m (in Tertiary cover) to 1511 m (in a megablock of Cretaceous target sediments), penetrating approx. 100 m of melt-bearing impactites between 794 and 895 m. The Yaxcopoil-1 (YAX-1) borehole is approx. 60-65 km from the center of the Chicxulub structure, which is approx. 15 km beyond the limit of the estimated approx. 50 km radius transient crater (excavation cavity), but within the rim of the estimated approx. 90 km radius final crater. In general, the impactite sequence is incredibly rich in impact melts of unusual textural variety and complexity, quite unlike melt-bearing impact formations from other terrestrial craters.

Kring, David A.↗

In-situ Measurements of the Radiolytic Destruction of Glycine in Ices: Applications to the Martian Subsurface

Amino acids and other organic molecules are thought to be easily destroyed on the surface of Mars by the high flux of incident ultraviolet rays or by chemical interactions with oxidizing substances in the soil. However, organic molecules may survive in the subsurface, where chemical processes are driven by penetrating galactic cosmic rays such as MeV protons. Models of the radiation dose as a function of depth on Mars have shown that the contribution of galactic cosmic rays dominates from about one centimeter to a few meters [1 J. Theoretical models have also been published to aid in understanding molecular destruction at these depths, but these usually are based on room-temperature laboratory data, studies of single-component samples, and ex-situ methods of chemical analysis. Recent studies of amino-acid survivability include those involving UV photolysis [2, 3J and gamma radiolysis [4], but nearly all chemical and kinetic analyses from such experiments involved room-temperature measurements on samples irradiated and then removed from sealed containers. We report new laboratory studies of the radiation-induced destruction of glycine-containing ices. In-situ infrared spectroscopy was used to study decay rates as a function of temperature and initial glycine concentrations. Our results indicate that glycine's destruction rate depends on temperature, the presence of H20-ice, and the initial relative abundance of glycine. These trends are not obvious in previous work, suggesting that room-temperature measurements on pure glycine's radiation stability are not directly applicable to Mars and other environments.

Gerakines, Perry A.↗

The Radiation Stability of Glycine in Solid CO2 - In Situ Laboratory Measurements with Applications to Mars

The detection of biologically important, organic molecules on Mars is an important goal that may soon be reached. However, the current small number of organic detections at the martian surface may be due to the harsh UV and radiation conditions there. It seems likely that a successful search will require probing the subsurface of Mars, where penetrating cosmic rays and solar energetic particles dominate the radiation environment, with an influence that weakens with depth. Toward the goal of understanding the survival of organic molecules in cold radiation-rich environments on Mars, we present new kinetics data on the radiolytic destruction of glycine diluted in frozen carbon dioxide. Rate constants were measured in situ with infrared spectroscopy, without additional sample manipulation, for irradiations at 25, 50, and 75 K with 0.8-MeV protons. The resulting half-lives for glycine in CO2-ice are compared to previous results for glycine in H2O-ice and show that glycine in CO2-ice is much less stable in a radiation environment, with destruction rate constants approximately 20-40 times higher than glycine in H2O-ice. Extrapolation of these results to conditions in the martian subsurface results in half-lives estimated to be less than 100-200 Myr even at depths of a few meters.

Ices↗

Orbital SAR and Ground-Penetrating Radar for Mars: Complementary Tools in the Search for Water

The physical structure and compositional variability of the upper martian crust is poorly understood. Optical and infrared measurements probe at most the top few cm of the surface layer and indicate the presence of layered volcanics and sediments, but it is likely that permafrost, hydrothermal deposits, and transient liquid water pockets occur at depths of meters to kilometers within the crust. An orbital synthetic aperture radar (SAR) can provide constraints on surface roughness, the depth of fine-grained aeolian or volcanic deposits, and the presence of strongly absorbing near-surface deposits such as carbonates. This information is crucial to the successful landing and operation of any rover designed to search for subsurface water. A rover-based ground-penetrating radar (GPR) can reveal layering in the upper crust, the presence of erosional or other subsurface horizons, depth to a permafrost layer, and direct detection of near-surface transient liquid water. We detail here the radar design parameters likely to provide the best information for Mars, based on experience with SAR and GPR in analogous terrestrial or planetary environments.

Campbell, B. A.↗

Numerical Experiments of Counterflowiing Jet Effects on Supersonic Slender-Body Configurations

Previous studies have demonstrated that the use of counterflowing jets can greatly reduce the drag and heat loads on blunt-body geometries, especially when the long penetration mode jet condition can be established. Previously, the authors had done some preliminary numerical studies to determine the ability to establish long penetration mode jets on a typical Mach 1.6 slender configuration, and study its impact on the boom signature. The results indicated that a jet with a longer penetration length was required to achieve any impact on the boom signature of a typical Mach 1.6 slender configuration. This paper focuses on an in-depth parametric study, done using the space-time conservation element solution element Navier-Stokes flow solver, for investigating the effect of various counterflowing jet conditions/configurations on two supersonic slender-body models (cone-cylinder and quartic body of revolution). The study is aimed at gaining a better understanding of the relationship between the shock penetration length and reduction of drag and boom signature for these two supersonic slender-body configurations. Different jet flow rates, Mach numbers, nozzle jet exit diameters and jet-to-base diameter ratios were examined. The results show the characteristics of a short-to-long-to-short penetration-mode pattern with the increase of jet mass flow rates, observed across various counterflowing jet nozzle configurations. Though the optimal shock penetration length for potential boom-signature mitigation is tied to the long penetration mode, it often results in a very unsteady flow and leads to large oscillations of surface pressure and drag. Furthermore, depending on the geometry of the slender body, longer jet penetration did not always result in maximum drag reduction. For the quartic geometry, the maximum drag reduction corresponds well to the longest shock penetration length, while this was not the case for the cone-cylinder-as the geometry was already optimized for drag. Numerical results and assessments obtained from this parametric study along with the recommendation for future implementation of counterflowing jets as a means for drag and noise reduction are detailed in this paper.

Venkatachari, Balaji Shankar↗

The Crack-contact and the Free End Problem for a Strip Under Residual Stress

The plane problem for an infinite strip with two edge cracks under a given state of residual stress is considered. The residual stress is compressive near and at the surfaces and tensile in the interior of the strip. If the crack is deep enough to penetrate into the tensile zone, then the problem is one of crack-contact problem in which the depth of the contact area is an unknown which depends on the crack depth and the residual stress profile. The problem has applications to the static fatigue of glass plates and is solved for three typical residual stress profiles. In the limiting case of the crack crossing the entire plate thickness, the problem becomes a stress-free end problem for a semi-infinite strip under a given residual stress state away from the end. This is a typical stress diffusion problem in which decay behavior of the residual stress near and the nature of the normal displacement at the end of the semi-infinite strip are of special interest. For two typical residual stress states the solution is obtained, and some numerical results are given.

Bakioglu, M.↗

Measurement of proton production cross sections of (sup 10)Be and (sup 26)Al from elements found in lunar rocks

Cosmic rays penetrate the lunar surface and interact with the lunar rocks to produce both radionuclides and stable nuclides. Production depth profiles for long-lived radionuclides produce in lunar rocks are measured using Accelerator Mass Spectrometry (AMS). For a particular radionuclide these production depth profiles can be interpreted to give an estimate for the solar proton flux over a time period characterized by the half life of the radionuclide under study. This analysis is possible if and only if all the cross sections for the interactions of all cosmic ray particles with all elements found in lunar rocks are well known. In practice, the most important cross sections needed are the proton production cross sections, because 98% of solar cosmic rays and (similar to)87% of galactic cosmic rays are protons. The cross sections for the production of long-lived radionuclides were very difficult to measure before the development of AMS and only in recent years has significant progress been made in determining these essential cross sections. Oxygen and silicon are major constituents of lunar rocks. We have reported already C-14 production cross sections from O and Si for proton energies 25-500 MeV, and O(p,x)(sup 10)Be from 58 160 MeV[6]. Here we present new measurements for the cross sections O(p,x)Be-10,O(p,x)Be-7, Si(p,x)Be-7,Si(p,x)Al-26, and Si(p,x)Na-22 from approximately 30 - 500 MeV.

Sisterson, J. M.↗

Radar Soundings of the Subsurface of Mars

The martian subsurface has been probed to kilometer depths by the Mars Advanced Radar for Subsurface and Ionospheric Sounding instrument aboard the Mars Express orbiter. Signals penetrate the polar layered deposits, probably imaging the base of the deposits. Data from the northern lowlands of Chryse Planitia have revealed a shallowly buried quasi-circular structure about 250 kilometers in diameter that is interpreted to be an impact basin. In addition, a planar reflector associated with the basin structure may indicate the presence of a low-loss deposit that is more than 1 kilometer thick.

Mars Express orbiter↗

A Tower-based Prototype VHF/UHF Radar for Subsurface Sensing: System Description and Data Inversion Results

Knowledge of subsurface characteristics such as permittivity variations and layering structure could provide a breakthrough in many terrestrial and planetary science disciplines. For Earth science, knowledge of subsurface and subcanopy soil moisture layers can enable the estimation of vertical flow in the soil column linking surface hydrologic processes with that in the subsurface. For planetary science, determining the existence of subsurface water and ice is regarded as one of the most critical information needs for the study of the origins of the solar system. The subsurface in general can be described as several near-parallel layers with rough interfaces. Each homogenous rough layer can be defined by its average thickness, permittivity, and rms interface roughness assuming a known surface spectral distribution. As the number and depth of layers increase, the number of measurements needed to invert for the layer unknowns also increases, and deeper penetration capability would be required. To nondestructively calculate the characteristics of the rough layers, a multifrequency polarimetric radar backscattering approach can be used. One such system is that we have developed for data prototyping of the Microwave Observatory of Subcanopy and Subsurface (MOSS) mission concept. A tower-mounted radar makes backscattering measurements at VHF, UHF, and L-band frequencies. The radar is a pulsed CW system, which uses the same wideband antenna to transmit and receive the signals at all three frequencies. To focus the beam at various incidence angles within the beamwidth of the antenna, the tower is moved vertically and measurements made at each position. The signals are coherently summed to achieve focusing and image formation in the subsurface. This requires an estimate of wave velocity profiles. To solve the inverse scattering problem for subsurface velocity profile simultaneously with radar focusing, we use an iterative technique based on a forward numerical solution of the layered rough surface problem. The layers are each defined in terms of a small number of unknown distributions as given above. An a priori estimate of the solution is first assumed, based on which the forward problem is solved for the backscattered measurements. This is compared with the measured data and using iterative techniques an update to the solution for the unknowns is calculated. The process continues until convergence is achieved. Numerical results will be shown using actual radar data acquired with the MOSS tower radar system in Arizona in Fall 2003, and compared with in-situ measurements.

Moghaddam, Mahta↗

Titan's Ionospheric Chemistry, Fullerenes, Oxygen, Galactic Cosmic Rays and the Formation of Exobiological Molecules on and Within Its Surfaces and Lakes

We discuss the formation of aerosols within Titan's thermosphere-ionosphere and the different chemical pathways. Negative ion measurements by the Cassini Plasma Spectrometer (CAPS) Electron Spectrometer (ELS) give evidence for formation of unsaturated anion carbon chains, while positive ion measurements of the Cassini Ion Neutral Mass Spectrometer (INMS) indicate formation of more aromatic cation hydrocarbons. There is presently no direct observational evidence for large neutral molecule growth in Titan's thermosphere-ionosphere. The hydrocarbon cations are expected to form Polycyclic Aromatic Hydrocarbons (PAHs), those with the addition of nitrogen being called PAHNs. We theorize anion carbon chains can eventually become long enough to fold into fullerene C60,70 carbon shells, of various charge states. Based on laboratory data the fullerenes can trap incoming O+ magnetospheric ions that have relatively high energy collisions with the fullerenes and, once trapped, protect the oxygen atom from Titan's reducing thermosphere-ionosphere. The fullerenes can form into larger onion fullerenes and condense into larger embryo aerosols (i.e., m/q (mass-to-charge ratio) greater than 10,000 amu/q (atomic mass unit-to-charge ratio) anions as observed by CAPS/ELS) eventually falling onto Titan's surface and precipitating to the bottom of its hydrocarbon lakes. Molecule production composed of H, C, N is known to occur in Titan's atmosphere with energy input from the magnetosphere, solar UV (ultraviolet), and deep-penetrating irradiation from galactic cosmic rays (GCR). Space radiation effects by GCR irradiation of Titan's surface and lakes can lead to the manufacture of exobiological molecules with oxygen as the new ingredient. We have developed a model of galactic cosmic ray irradiation of Titan's atmosphere, surface, subsurface and bottoms of Titan lakes. GCR would provide further energy for processing of the aerosols into more complex organic forms such as tholins and precursor molecules for amino acids. A second process called hydrolysis then converts the precursor molecules into amino acids. Hydrolysis is provided via meteor impacts with size greater than 10 kilometers and cryovolcanism both which can produce liquid water on Titan's surface for episodic periods more than several 100 to 1000 years. Our model shows that GCR secondary particles can penetrate ~100 meters below the ice surface (including the bottom of Titan's less dense hydrocarbon lakes ~150-meter depths) and produce chemically significant dosages over very long timescales ~450 million years. The GCR model is combined with laboratory data from experiments in which dry methyl ices were irradiated to doses producing prebiotic amino acids such as glycine. The model calculations show glycine can form to ~2.5 parts-per-billion levels near the surface after ~450 million years of GCR proton irradiation and potentially to 5 parts-per-billion if heavy-ion GCRs up through Fe are included. If such molecules were detected, this would not only confirm this model but indicate that life forms different from ours may not be required.

Edward C. Sittler Jr↗

Titan's Ionospheric Chemistry, Fullerenes, Oxygen, Galactic Cosmic Rays and the Formation of Exobiological Molecules on and within its Surfaces and Lakes

We discuss the formation of aerosols within Titan's thermosphere-ionosphere and the different chemical pathways. Negative ion measurements by the Cassini Plasma Spectrometer (CAPS) Electron Spectrometer (ELS) give evidence for formation of unsaturated anion carbon chains, while positive ion measurements of the Cassini Ion Neutral Mass Spectrometer (INMS) indicate formation of more aromatic cation hydrocarbons. There is presently no direct observational evidence for large neutral molecule growth in Titan's thermosphere-ionosphere. The hydrocarbon cations are expected to form Polycyclic Aromatic Hydrocarbons (PAH), those with the addition of nitrogen being called PAHNs. We theorize anion carbon chains can eventually become long enough to fold into fullerene C(60,70) carbon shells, of various charge states. Based on laboratory data the fullerenes can trap incoming O(sup +) magnetospheric ions that have relatively high energy collisions with the fullerenes and, once trapped, protect the oxygen atom from Titan's reducing thermosphere-ionosphere. The fullerenes can form into larger onion fullerenes and condense into larger embryo aerosols (i.e., m/q > 10,000 amu/q anions as observed by CAPS/ELS) eventually falling onto Titan's surface and precipitating to the bottom of its hydrocarbon lakes. Molecule production composed of H, C, N is known to occur in Titan's atmosphere with energy input from the magnetosphere, solar UV, and deeppenetrating irradiation from galactic cosmic rays (GCR). Space radiation effects by GCR irradiation of Titan's surface and lakes can lead to the manufacture of exobiological molecules with oxygen as the new ingredient. We have developed a model of galactic cosmic ray irradiation of Titan's atmosphere, surface, subsurface and bottoms of Titan lakes. GCR would provide further energy for processing of the aerosols into more complex organic forms such as tholins and precursor molecules for amino acids. A second process called hydrolysis then converts the precursor molecules into amino acids. Hydrolysis is provided via meteor impacts with size > 10 km and cryovolcanism both which can produce liquid water on Titan's surface for episodic periods > several 100 to 1000 years. Our model shows that GCR secondary particles can penetrate ~ 100 m below the ice surface (including the bottom of Titan's less dense hydrocarbon lakes ~ 150 m depths) and produce chemically significant dosages over very long timescales ~ 450 Myrs. The GCR model is combined with laboratory data from experiments in which dry methyl ices were irradiated to doses producing prebiotic amino acids such as glycine. The model calculations show glycine can form to ~ 2.5 ppb levels near the surface after ~450 Myrs of GCR proton irradiation and potentially to 5 ppb if heavy-ion GCRs up through Fe are included. If such molecules were detected, this would not only confirm this model but indicate that life forms different from ours may not be required.

Edward C. Sittler Jr↗

Brillouin Asymmetric Spatial Heterodyne Oceanographic Lidar Receiver for Profiling Temperature, Salinity, and Sound Velocity

No sensor today is capable of remotely sensing temperature and salinity at depth in oceanic waters, yet the physics to do so exists. Blue-green light (450-550 nm) can penetrate 10’s of meters into the water and interacts with water by the Brillouin scatter process. Temperature and salinity can be determined by analyzing the spectrum of Brillouin scatter. A host of scientific and operational drivers exist for such a sensor, from improved hurricane and red tide forecasting to studies of ocean fronts, eddies, and freshwater lenses. A low flying airborne light detection and ranging (lidar) instrument concept that exploits this physics is presented, along with simulation tools that potential data users can use to model its measurement performance, determine suitability for their application, and assess its implications.

John Anthony Smith↗

Impact flows and crater scaling on the moon

The axisymmetric distribution of stress, internal energy, and particle velocity resulting from the impact of an iron meteoroid with a gabbroic anorthosite lunar crust has been calculated for the regime in which shock-induced melting and vaporization take place. Comparison of impact flow fields, with phase changes in silicates taken into account, with earlier results demonstrate that in the phase-change case where the 15-km/s projectile has penetrated some two projectile radii into the moon, the peak stress in the flow is about 0.66 Mbar at a depth of 66 km, and the stress has decayed to about 66 kbar at a depth of 47 km. Rapid attenuation occurs because of the high rarefaction velocity of the high-pressure phases associated with a 35% (zero-pressure) density increase. This feature of the phase-change flow tends to concentrate strongly the maximum shock pressures along the meteoroid trajectory (axis) and makes the conical zone along which high internal energy deposition occurs both shallow and narrow. Examination of the gravitational energies required to excavate larger craters on the moon indicates the importance of gravity forces acting during the excavation of craters having radii in the range greater than about 2 to 140 km.

Okeefe, J. D.↗