Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Calibration of photoelastic modulator based dichrometers: maintaining constant phase across the spectrum

Photoelastic modulators can alter the polarization state of a beam of ultraviolet, visible or infrared photons by means of periodic stress-induced differences in the refractive index of a transparent material that forms the optical element of the device and is isotropic in the absence of stress. Furthermore, they have found widespread application in instruments that characterize or alter the polarization state of a beam in fields as diverse as astronomy, structural biology, materials science and ultraviolet lithography for the manufacture of nano-scale integrated circuits. Measurement of circular dichroism, the differential absorption of left- and right circularly polarized light, and of strain-induced birefringence of optical components are major applications. Instruments using synchrotron radiation and photoelastic modulators with CaF 2 optical elements have extended circular dichroism measurements down to wavelengths of about 130 nm in the vacuum ultraviolet. Maintaining a constant phase shift between two orthogonal polarization states across a spectrum requires that the amplitude of the modulated stress be changed as a function of wavelength. For commercially available photoelastic modulators, the voltage that controls the amplitude of modulation required to produce a specified phase shift, which is a surrogate for the stress modulation amplitude, has been shown to be an approximately linear function of wavelength in the spectral region where the optical element is transparent. But, extrapolations of such straight lines cross zero voltage at a non-zero wavelength, not at zero-wavelength. For modulators with calcium fluoride and fused silica optical elements, the zero-crossing wavelength is always in the spectral region where the optical element of the modulator strongly absorbs the incident radiation, and at a wavelength less than the longest-wavelength apparent resonance deduced from experimental values of the refractive index fit to the Sellmeier equation. Using a model that relates the refractive indices of a stressed optical element to the refractive index of its unstressed state, an expression for the modulator control voltage was derived that closely fits the experimental data. Our result provides a theoretical rational for the apparently linear constant-phase programming voltage, and thus provides theoretical backing for the calibration procedure frequently used for these modulators. Lastly there are other factors that can influence the calibration of a photoelastic modulator, including temperature and atmospheric pressure, are discussed briefly.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Entanglement suppression for $ΩΩ$ scattering

We study entanglement suppression in $s$-wave $ΩΩ$ scattering, where each baryon has spin $3/2$. By treating the $S$-matrix as a quantum operator acting on the spin states, we quantify its ability to generate entanglement and identify the conditions on the phase shifts of the spin channels that minimize entanglement generation in the system. In $ΩΩ$ scattering, only antisymmetric spin channels are allowed due to Fermi-Dirac statistics. Applying the entanglement-suppression framework to $ΩΩ$ scattering, we find two solutions for the phase shifts: one leading to a spin SU(4) symmetry and the other to a nonrelativistic conformal symmetry. We show that the solution associated with the nonrelativistic conformal symmetry originates from the specific structure of the Clebsch-Gordan coefficients in the $3/2 \otimes 3/2$ system.

Sone, Katsuyoshi [Tokyo Metropolitan U.] (ORCID:00↗

P -wave π π scattering and the ρ resonance from lattice QCD

Here we calculate the parameters describing elastic I = 1, P-wave ππ scattering using lattice QCD with 2 +1 flavors of clover fermions. Our calculation is performed with a pion mass of m π ≈ 320 MeV and a lattice size of L ≈ 3.6 fm. We construct the two-point correlation matrices with both quark-antiquark and two-hadron interpolating fields using a combination of smeared forward, sequential and stochastic propagators. The spectra in all relevant irreducible representations for total momenta |$\vec{P}$| ≤ $\sqrt{3}\frac{2π}{L}$ are extracted with two alternative methods: a variational analysis as well as multiexponential matrix fits. We perform an analysis using Lüscher’s formalism for the energies below the inelastic thresholds, and investigate several phase shift models, including possible nonresonant contributions. We find that our data are well described by the minimal Breit-Wigner form, with no statistically significant nonresonant component. In determining the ρ resonance mass and coupling we compare two different approaches: fitting the individually extracted phase shifts versus fitting the t-matrix model directly to the energy spectrum. We find that both methods give consistent results, and at a pion mass of am π = 0.18295 (36) stat obtain gρππ = 5.69(13) stat (16) sys , am ρ = 0.4609(16) stat (14) sys , and am ρ /am N = 0.7476(38) stat (23) sys , where the first uncertainty is statistical and the second is the systematic uncertainty due to the choice of fit ranges.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Silicon photonics thermal phase shifter with reduced temperature range

Optical devices, phased array systems and methods of phase-shifting an input signal are provided. An optical device includes a microresonator and a waveguide for receiving an input optical signal. The waveguide includes a segment coupled to the microresonator with a coupling coefficient such that the waveguide is overcoupled to the microresonator. The microresonator received the input optical signal via the waveguide and phase-shifts the input optical signal to form an output optical signal. The output optical signal is coupled into the waveguide via the microresonator and transmitted by the waveguide. At an operating point of the optical device, the coupling coefficient is selected to reduce a change in an amplitude of the output optical signal and to increase a change in a phase of the output optical signal, relative to the input optical signal.

47 OTHER INSTRUMENTATION↗

Glauber-Theory Calculations of High-Energy Nuclear Scattering Observables Using Variational Monte Carlo Wave Functions

Experiments using intermediate- to high-energy radioactive nuclear beams present numerous findings. Extracting important properties of physical observables relies on a firm theoretical analysis. Though Glauber theory is believed to work well, no convincing calculation has so far been done. Here, we perform ab initio Glauber theory calculations of both elastic differential cross sections and total reaction cross sections for p+ 12 C, 12 C+ 12 C, and 6 He+ 12 C systems. The wave functions of both 6 He and 12 C are generated by variational Monte Carlo calculations with spatial and spin-isospin correlations induced by realistic two- and three-nucleon potentials. Glauber’s phase-shift function is computed by Monte Carlo integration up to all orders of nucleon-nucleon multiple scatterings. We show an excellent performance of the Glauber description to the selected data on the above systems. We also find that the cumulant expansion of the phase-shift function converges rapidly up to the second order for the above systems. This finding will open up interesting applications for the analysis of high-energy nuclear experiments.

Horiuchi, W. [Osaka Metropolitan University (Japan↗

Two-pion exchange as a leading-order contribution in chiral effective field theory

Pion exchange is the central ingredient to nucleon-nucleon interactions used in nuclear structure calculations, and one-pion exchange (OPE) enters at leading order in chiral effective field theory. In the 2S+1 L J = 1 S 0 partial wave, however, OPE and a contact term needed for proper renormalization fail to produce the qualitative, and quantitative, features of the scattering phase shifts. Cutoff variation also revealed a surprisingly low breakdown momentum Λ b ≈ 330 MeV in this partial wave. Here we show that potentials consisting of OPE, two-pion exchange (TPE), and a single contact address these problems and yield accurate and renormalization group (RG) invariant phase shifts in the 1 S 0 partial wave. Here, we demonstrate that a leading-order potential with TPE can be systematically improved by adding a contact quadratic in momenta. For momentum cutoffs Λ ≲ 500 MeV, the removal of relevant physics from TPE loops needs to be compensated by additional contacts to keep RG invariance. Inclusion of the Δ isobar degree of freedom in the potential does not change the strong contributions of TPE.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Memory coherence of a sympathetically cooled trapped-ion qubit

We demonstrate sympathetic cooling of a {sup 43}Ca{sup +} trapped-ion 'memory' qubit by a {sup 40}Ca{sup +}'coolant' ion sufficiently near the ground state of motion for fault-tolerant quantum logic, while maintaining coherence of the qubit. This is an essential ingredient in trapped-ion quantum computers. The isotope shifts are sufficient to suppress decoherence and phase shifts of the memory qubit due to the cooling light which illuminates both ions. We measure the qubit coherence during ten cycles of sideband cooling, finding a coherence loss of 3.3% per cooling cycle. The natural limit of the method is O(10{sup -4}) infidelity per cooling cycle.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Extracting free-space observables from trapped interacting clusters

The energy spectrum of two short-range interacting particles in a harmonic potential trap has previously been related to free-space scattering phase shifts. But the existing formula for systems with a nonzero interaction range is exact only in the limit of an infinitely shallow trap. Here I provide a systematically improved formula—describing the low-energy dynamics—that enables the use of finite traps. This paves the way for extracting nuclear scattering phase shifts from ab initio nuclear many-body structure calculations, a long-sought goal in nuclear physics. In this work, the derivation establishes effective field theory as a powerful framework for studying the connection between structure information of a trapped system (with two or more subclusters) and continuum physics in the fields of both nuclear and condensed-matter physics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Time reversal in a phononic crystal using finite-element modeling and an equivalent circuit model

A phononic crystal acts as a dispersive medium with a phase speed that is lower than the bulk wave speed at frequencies below the resonance of a single resonator. Time reversal is used to compensate for the phase shifts caused by individual resonators as the waves enter the medium and enable focusing of acoustic waves among the crystal. An equivalent circuit, which can predict the dispersion and attenuation of the crystal model, is shown and compared to a full-wave finite-element simulation in frequency and time. The phase shift due to a single resonator is also depicted.

Kingsley, Adam D. (ORCID:0000000226611788)↗

Development of frequency modulated continuous wave reflectometer for electron density profile measurement on the HL-2A tokamak

The frequency modulated continuous wave reflectometer was developed for the first time on the HL-2A tokamak. The system utilizes a voltage controlled oscillator and an active multiplier for broadband coverage and detects as heterodyne mode. Three reflectometers have been installed and operated in extraordinary mode polarization on HL-2A to measure density profiles at low field side, covering the Q-band (33–50 GHz), V-band (50–75 GHz), and W-band (75–110 GHz). For density profile reconstruction from the phase shift of the probing wave, a corrected phase unwrapping method is introduced in this article. The effectiveness of the method is demonstrated. The density profile behavior of a fast plasma event is presented and it demonstrates the capability of the reflectometer. These diagnostics will be contributed to the routine density profile measurements and the plasma physics study on HL-2A.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

OPTICAL PHASE CURVES OF KEPLER EXOPLANETS

We conducted a comprehensive search for optical phase variations of all close-in (a/R{sub *} < 10) planet candidates in 15 quarters of Kepler space telescope data. After correcting for systematics, we found eight systems that show secondary eclipses as well as phase variations. Of these, five (Kepler-5, Kepler-6, Kepler-8, KOI-64, and KOI-2133) are new and three (TrES-2, HAT-P-7, and KOI-13) have published phase curves, albeit with many fewer observations. We model the full phase curve of each planet candidate, including the primary and secondary transits, and derive their albedos, dayside and nightside temperatures, ellipsoidal variations, and Doppler beaming. We find that KOI-64 and KOI-2133 have nightside temperatures well above their equilibrium values (while KOI-2133 also has an albedo, >1), so we conclude that they are likely to be self-luminous objects rather than planets. The other six candidates have characteristics consistent with their being planets with low geometric albedos (<0.3). For TrES-2 and KOI-13, the Kepler bandpass appears to probe atmospheric layers hotter than the planet's equilibrium temperature. For KOI-13, we detect a never-before-seen third cosine harmonic with an amplitude of 6.7 {+-} 0.3 ppm and a phase shift of -1.1 {+-} 0.1 rad in the phase curve residual, possibly due to its spin-orbit misalignment. We report derived planetary parameters for all six planets, including masses from ellipsoidal variations and Doppler beaming, and compare our results to published values when available. Our results nearly double the number of Kepler exoplanets with measured phase curve variations, thus providing valuable constraints on the properties of hot Jupiters.

79 ASTRONOMY AND ASTROPHYSICS↗

Ab initio many-body calculations of nucleon- 4 He scattering with three-nucleon forces

We extend the ab initio no-core shell model/resonating-group method to include three-nucleon (3N) interactions for the description of nucleon-nucleus collisions. We outline the formalism, give algebraic expressions for the 3N-force integration kernels, and discuss computational aspects of two alternative implementations. The extended theoretical framework is then applied to nucleon- 4 He elastic scattering using similarity-renormalization-group (SRG)-evolved nucleon-nucleon plus 3N potentials derived from chiral effective field theory. We analyze the convergence properties of the calculated phase shifts and explore their dependence upon the SRG evolution parameter. We include up to six excited states of the 4 He target and find significant effects from the inclusion of the chiral 3N force, e.g., it enhances the spin-orbit splitting between the 3/2 – and 1/2 – resonances and leads to an improved agreement with the phase shifts obtained from an accurate R-matrix analysis of the five-nucleon experimental data. As a result, we find remarkably good agreement with measured differential cross sections at various energies below the d+ 3 H threshold, while analyzing powers manifest larger deviations from experiment for certain energies and angles.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Isoscalar π π Scattering and the σ Meson Resonance from QCD

Here, we present for the first time a determination of the energy dependence of the isoscalar ππ elastic scattering phase-shift within a first-principles numerical lattice approach to QCD. We also compute the hadronic correlation functions including all required quark propagation diagrams. From these the discrete spectrum of states in the finite volume defined by the lattice boundary is extracted. From the volume dependence of the spectrum we obtain the S-wave phase-shift up to the K$\bar{K}$ threshold. Calculations are performed at two values of the u, d quark mass corresponding to m π = 236, 391 MeV and the resulting amplitudes are described in terms of a σ meson which evolves from a bound-state below ππ threshold at the heavier quark mass, to a broad resonance at the lighter quark mass.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measuring small absorptions by exploiting photothermal self-phase modulation

We present a method for the measurement of small optical absorption coefficients. The method exploits the deformation of cavity Airy peaks that occur if the cavity contains an absorbing material with a nonzero thermorefractive coefficient dn/dT or a nonzero expansion coefficient ath. Light absorption leads to a local temperature change and to an intensity-dependent phase shift, i.e., to a photothermal self-phase modulation. The absorption coefficient is derived from a comparison of time-resolved measurements with a numerical time-domain simulation applying a Markov-chain Monte Carlo algorithm. We apply our method to the absorption coefficient of lithium niobate doped with 7mol.% magnesium oxide and derive a value of {alpha}LN=(5.9{+-}0.9)x10{sup -4}/cm. Our method should also apply to materials with much lower absorption coefficients. Based on our modeling, we estimate that, with cavity finesse values of the order of 10{sup 4}, absorption coefficients of as low as 10{sup -8}/cm can be measured.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Magnetometer Based on a Spin Wave Interferometer

Here, we describe a magnetic field sensor based on a spin wave interferometer. Its sensing element consists of a magnetic cross junction with four micro-antennas fabricated at the edges. Two of these antennas are used for spin wave excitation while two other antennas are used for detection of the inductive voltage produced by the interfering spin waves. Two waves propagating in the orthogonal arms of the cross may accumulate significantly different phase shifts depending on the magnitude and direction of the external magnetic field. This phenomenon is utilized for magnetic field sensing. The sensitivity attains its maximum under the destructive interference condition, where a small change in the external magnetic field results in a drastic increase of the inductive voltage, as well as in the change of the output phase. We report experimental data obtained for a micrometer scale Y 3 Fe 2 (FeO 4 ) 3 cross structure. The change of the inductive voltage near the destructive interference point exceeds 40 dB per 1 Oe. The phase of the output signal exhibits a π-phase shift within 1 Oe. The data are collected at room temperature. Taking into account the low thermal noise in ferrite structures, we estimate that the maximum sensitivity of the spin wave magnetometer may exceed attotesla.

47 OTHER INSTRUMENTATION↗

Across-plane thermal characterization of films based on amplitude-frequency profile in photothermal technique

This work develops an amplitude method for the photothermal (PT) technique to analyze the amplitude of the thermal radiation signal from the surface of a multilayered film sample. The thermal conductivity of any individual layer in the sample can be thereby determined. Chemical vapor deposited SiC film samples (sample 1 to 3: 2.5 to 3.5 μm thickness) with different ratios of Si to C and thermally oxidized SiO{sub 2} film (500 nm thickness) on silicon substrates are studied using the amplitude method. The determined thermal conductivity based on the amplitude method is 3.58, 3.59, and 2.59 W/m⋅K for sample 1 to 3 with ±10% uncertainty. These results are verified by the phase shift method, and sound agreement is obtained. The measured thermal conductivity (k) of SiC is much lower than the value of bulk SiC. The large k reduction is caused by the structure difference revealed by Raman spectroscopy. For the SiO{sub 2} film, the thermal conductivity is measured to be 1.68 ± 0.17 W/m⋅K, a little higher than that obtained by the phase shift method: 1.31 ± 0.06 W/m⋅K. Sensitivity analysis of thermal conductivity and interfacial resistance is conducted for the amplitude method. Its weak-sensitivity to the thermal contact resistance, enables the amplitude method to determine the thermal conductivity of a film sample with little effect from the interface thermal resistance between the film and substrate. The normalized amplitude ratio at a high frequency to that at a low frequency provides a reliable way to evaluate the effusivity ratio of the film to that of the substrate.

36 MATERIALS SCIENCE↗

Axial resonances a$_{1}$(1260), b$_{1}$(1235) and their decays from the lattice

The light axial-vector resonances $a_1(1260)$ and $b_1(1235)$ are explored in Nf=2 lattice QCD by simulating the corresponding scattering channels $\rho\pi$ and $\omega\pi$. Interpolating fields $\bar{q} q$ and $\rho\pi$ or $\omega\pi$ are used to extract the s-wave phase shifts for the first time. The $\rho$ and $\omega$ are treated as stable and we argue that this is justified in the considered energy range and for our parameters $m_\pi\simeq 266~$MeV and $L\simeq 2~$fm. We neglect other channels that would be open when using physical masses in continuum. Assuming a resonance interpretation a Breit-Wigner fit to the phase shift gives the $a_1(1260)$ resonance mass $m_{a1}^{res}=1.435(53)(^{+0}_{-109})$ GeV compared to $m_{a1}^{exp}=1.230(40)$ GeV. The $a_1$ width $\Gamma_{a1}(s)=g^2 p/s$ is parametrized in terms of the coupling and we obtain $g_{a_1\rho\pi}=1.71(39)$ GeV compared to $g_{a_1\rho\pi}^{exp}=1.35(30)$ GeV derived from $\Gamma_{a1}^{exp}=425(175)$ MeV. In the $b_1$ channel, we find energy levels related to $\pi(0)\omega(0)$ and $b_1(1235)$, and the lowest level is found at $E_1 \gtrsim m_\omega+m_\pi$ but is within uncertainty also compatible with an attractive interaction. Lastly, assuming the coupling $g_{b_1\omega\pi}$ extracted from the experimental width we estimate $m_{b_1}^{res}=1.414(36)(^{+0}_{-83})$.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Impact of window temperature variations on ITER toroidal interferometer and polarimeter (TIP) measurements

Abstract The toroidal interferometer and polarimeter (TIP) is one of the primary electron density diagnostics on ITER. To meet measurement requirements over several thousand seconds, environmental factors such as changes in the window temperature, air temperature, and humidity, which can cause uncompensated phase drifts, must be minimized. This paper reports measurements of the phase shift induced by ZnSe and BaF₂ windows as their temperature is varied utilizing the TIP prototype. To accomplish these measurements, test pieces of BaF₂ and ZnSe are placed in a small oven that is located in one leg of the 10.59/5.22 micron two-color interferometer TIP prototype. The oven temperature was varied from room temperature to ∼90 °C, which is slightly higher than the expected window temperatures on ITER. The vibration compensated phase shifts measured for these two materials are dϕᵥ꜀ /dT/L = 0.0121 and −0.275 deg. /°C/cm −1 for BaF₂ and ZnSe, respectively. From these measurements, it was concluded that temperature variations of the environmental/secondary confinement barrier window and primary vacuum window have to be suppressed within approximately 1°C and 2°C, respectively, in order to passively meet the electron density measurement requirements in ITER.

Akiyama, T (ORCID:0000000198469795)↗