Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pilot performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Helmet-mounted pilot night vision systems: Human factors issues

Helmet-mounted displays of infrared imagery (forward-looking infrared (FLIR)) allow helicopter pilots to perform low level missions at night and in low visibility. However, pilots experience high visual and cognitive workload during these missions, and their performance capabilities may be reduced. Human factors problems inherent in existing systems stem from three primary sources: the nature of thermal imagery; the characteristics of specific FLIR systems; and the difficulty of using FLIR system for flying and/or visually acquiring and tracking objects in the environment. The pilot night vision system (PNVS) in the Apache AH-64 provides a monochrome, 30 by 40 deg helmet-mounted display of infrared imagery. Thermal imagery is inferior to television imagery in both resolution and contrast ratio. Gray shades represent temperatures differences rather than brightness variability, and images undergo significant changes over time. The limited field of view, displacement of the sensor from the pilot's eye position, and monocular presentation of a bright FLIR image (while the other eye remains dark-adapted) are all potential sources of disorientation, limitations in depth and distance estimation, sensations of apparent motion, and difficulties in target and obstacle detection. Insufficient information about human perceptual and performance limitations restrains the ability of human factors specialists to provide significantly improved specifications, training programs, or alternative designs. Additional research is required to determine the most critical problem areas and to propose solutions that consider the human as well as the development of technology.

Hart, Sandra G.↗
NASA NTRS1975

Secondary task for full flight simulation incorporating tasks that commonly cause pilot error: Time estimation

The task of time estimation, an activity occasionally performed by pilots during actual flight, was investigated with the objective of providing human factors investigators with an unobtrusive and minimally loading additional task that is sensitive to differences in flying conditions and flight instrumentation associated with the main task of piloting an aircraft simulator. Previous research indicated that the duration and consistency of time estimates is associated with the cognitive, perceptual, and motor loads imposed by concurrent simple tasks. The relationships between the length and variability of time estimates and concurrent task variables under a more complex situation involving simulated flight were clarified. The wrap-around effect with respect to baseline duration, a consequence of mode switching at intermediate levels of concurrent task distraction, should contribute substantially to estimate variability and have a complex effect on the shape of the resulting distribution of estimates.

Rosch, E.↗
NASA NTRS2021

Go-Around Criteria Refinement for Transport Category Aircraft

Presently, airline pilots are trained to go around if, when lower than 500 ft above the ground, they are outside of a handful of parameters such as airspeed, position, and rate of descent. At times, pilots do not comply with these criteria, perhaps owing to their conservative nature or complexity. This paper examines potential refinements to the continue-to-land decision from the combined results of three flight simulator experiments. Potential refinements include simplifying the number of parameters and lowering the altitude at which pilots make the decision. First, refinements were developed by evaluating pilots’ touchdown performance and qualitative data in a variety of starting and environmental conditions. Second, 30 of those pilots evaluated the refinements under several induced instabilities during the approach. The results showed little difference in touchdown performance when lowering the decision altitude from 500 to 300 ft; however, significant differences arose when the decision altitude was lowered further to 100 ft. The proposed new criteria include assessments of deviations in airspeed and position, no rate-of-descent audio warning, and having an appropriate engine setting at 1000, 500, and 300 ft height above threshold. Additionally, a recommendation is made that if the proposed criteria are not met at the 1000 or 500 ft height above threshold the pilots may make corrections and continue the approach; however, if the criteria are not met at 300 ft, then a go-around should be performed.

stabilized approach criteria↗
NASA NTRS2014

Multimodal Pilot Behavior in Multi-Axis Tracking Tasks with Time-Varying Motion Cueing Gains

In a large number of motion-base simulators, adaptive motion filters are utilized to maximize the use of the available motion envelope of the motion system. However, not much is known about how the time-varying characteristics of such adaptive filters affect pilots when performing manual aircraft control. This paper presents the results of a study investigating the effects of time-varying motion filter gains on pilot control behavior and performance. An experiment was performed in a motion-base simulator where participants performed a simultaneous roll and pitch tracking task, while the roll and/or pitch motion filter gains changed over time. Results indicate that performance increases over time with increasing motion gains. This increase is a result of a time-varying adaptation of pilots' equalization dynamics, characterized by increased visual and motion response gains and decreased visual lead time constants. Opposite trends are found for decreasing motion filter gains. Even though the trends in both controlled axes are found to be largely the same, effects are less significant in roll. In addition, results indicate minor cross-coupling effects between pitch and roll, where a cueing variation in one axis affects the behavior adopted in the other axis.

motion simulators↗
NASA NTRS2001

The Effect of Ownship Information and NexRad Resolution on Pilot Decision Making in the Use of a Cockpit Weather Information Display

A two-phase experiment was conducted to explore the effects of data-link weather displays upon pilot decision performance. The experiment was conducted with 49 instrument rated pilots who were divided into four groups and placed in a simulator with a realistic flight scenario involving weather containing convective activity. The inflight weather display depicted NEXRAD images, with graphical and textual METARs over a moving map display. The experiment explored the effect of weather information, ownship position symbology and NEXRAD cell size resolution. The phase-two experiment compared two groups using the data-linked weather display with ownship position symbology. These groups were compared to the phase-one group that did not have ownship position symbology. The phase-two pilots were presented with either large NEXRAD cell size (8 km) or small cell size (4 km). Observations noted that the introduction of ownship symbology did not appear to significantly impact the decision making process, however, the introduction of ownship did reduce workload. Additionally, NEXRAD cell size resolution did appear to influence the tactical decision making process.

Novacek, Paul F.↗
NASA NTRS2002

Hybrid Verification of an Interface for an Automatic Landing

Modern commercial aircraft have extensive automation which helps the pilot by performing computations, obtaining data, and completing procedural tasks. The pilot display must contain enough information so that the pilot can correctly predict the aircraft's behavior, while not overloading the pilot with unnecessary information. Human-automation interaction is currently evaluated through extensive simulation. In this paper, using both hybrid and discrete-event system techniques, we show how one could mathematically verify that an interface contains enough information for the pilot to safely and unambiguously complete a desired maneuver. We first develop a nonlinear, hybrid model for the longitudinal dynamics of a large civil jet aircraft in an autoland/go-around maneuver. We find the largest controlled subset of the aircraft's flight envelope for which we can guarantee both safe landing and safe go-around. We abstract a discrete procedural model using this result, and verify a discrete formulation of the pilot display against it. An interface which fails this verification could result in nondeterministic or unpredictable behavior from the pilot's point of view.

Oishi, Meeko↗
NASA NTRS2004

Comanche Helmet-Mounted Display Symbology Evaluation

This study assessed pilot-vehicle performance and workload associated with flying the Comanche Contact Analog, world-referenced primary flight symbology when compared with a conventional, screen-fixed, Compressed symbology. Previous investigation had revealed benefits when utilizing Compressed symbology in constrained flight maneuvers. The current evaluation further evaluated the effects of symbology by testing pilots in a high-fidelity simulator, executing more operational tasks. Flight performance and subjective ratings from six experimental test pilots were collected. Results replicated previous findings, and no performance differences were found in operational tasks. Pilot comments revealed significant preference for Compressed symbology, while some aspects of Contact Analog symbology raised objections. Performance, preference, and safety of flight issues perceived by test pilots merit a review of Contact Analog symbology design.

Dowell, Susan R.↗
NASA NTRS2016

Human Factors Guidelines for Remotely Piloted Aircraft System (RPAS) Remote Pilot Stations (RPS): Guidelines - Version 1.1

This document contains a list of human factors guidelines for remote pilot stations (RPS) arranged within an organizing structure. The guidelines are intended for the remote pilot stations (RPSs) of remotely piloted aircraft (RPA) that are capable of operating beyond visual line-of-sight in all airspace classes of the United States National Airspace System (NAS). Numerous human factors guidelines and standards for technological systems have been published by standards agencies and regulatory authorities. In compiling this document, the intent was not to reproduce or re-state existing human factors material. Instead, this document focuses on the unique issues of civilian RPAS, and contains guidelines specific to this sector. As a result, it should be seen as a supplement to existing aviation human factors standards and guidance material. Two constraints were used to focus the scope of this document. First, the assumptions contained in the FAA (2013a) UAS roadmap were used to define the responsibilities that will be assigned to the pilot of a RPAS operating beyond visual line-of-sight in the NAS. This in turn, helped to define the tasks that the remote pilot must perform via the RPS, and thereby the required features and characteristics of the RPS. Second, the points of difference between RPAS and conventional aviation were used to further focus the guidelines on the considerations that make piloting a RPA significantly different to piloting a conventional aircraft. Five broad categories of guidelines are identified. These are (1) performance-based descriptions of pilot tasks that must be accomplished via the RPS, (2) information content of displays, (3) descriptions of control inputs, (4) properties of the interface, and (5) high-level design considerations. Some of the guidelines in this document have been adapted from existing RPAS human factors material from several sources, including RTCA publications and Standardization Agreements (STANAGs) published by the North Atlantic Treaty Organization (NATO).

unmanned↗
NASA NTRSDate not supplied

Examining the Relationship between Self-Reported Workload and Resilient Performance in Airline Flight Crews

Workload has long been associated with human performance in aviation. High workload is typically viewed as a system design problem. The aim of this work was to find observable behaviors that guard cognitive resource margins; thus, improve handling of perturbations that arise. Twelve commercial airline flight crews participated in an experiment at NASA Langley Research Center. We explored workload data (NASA Task Load Index) self-reported after completing flight simulation scenarios to see how different individuals, using the same technologies, cope with challenging situations. A trained observer from the same airline as the study participants assessed performance. We differentiated a lower workload crew from a higher workload crew and analyzed their workload and performance. Results indicate that the workload may be a component of pilots’ resilient performance. Initial strategies that reduced workload were classified and these types of behaviors, if implemented correctly, might assist pilots in maintaining functional workload resource margins.

Michael Stewart↗
NASA NTRSDate not supplied

Examining the Relationship Between Workload and Resilient Performance in Airline Flight Crews

Workload has long been associated with human performance in aviation. High workload is typically viewed as a system design problem. The aim of this work was to find observable behaviors that guard cognitive resource margins; thus, improve handling of perturbations that arise. Twelve commercial airline flight crews participated in an experiment at NASA Langley Research Center. We explored workload data (NASA Task Load Index) self-reported after completing flight simulation scenarios to see how different individuals, using the same technologies, cope with challenging situations. A trained observer from the same airline as the study participants assessed performance. We differentiated a lower workload crew from a higher workload crew and analyzed their workload and performance. Results indicate that the workload may be a component of pilots’ resilient performance. Initial strategies that reduced workload were classified and these types of behaviors, if implemented correctly, might assist pilots in maintaining functional workload resource margins.

Michael Stewart↗
NASA NTRS1982

The reliability and validity of flight task workload ratings

Twelve instrument-rated general aviation pilots each flew two scenarios in a motion-base simulator. During each flight, the pilots verbally estimated their workload every three minutes. Following each flight, they again estimated workload for each flight segment and also rated their overall workload, perceived performance, and 13 specific factors on a bipolar scale. The results indicate that time (a priori, inflight, or postflight) of eliciting ratings, period to be covered by the ratings (a specific moment in time or a longer period), type of rating scale, and rating method (verbal, written, or other) may be important variables. Overall workload ratings appear to be predicted by different specific scales depending upon the situation, with activity level the best predictor. Perceived performance seems to bear little relationship to observer-rated performance when pilots rate their overall performance and an observer rates specific behaviors. Perceived workload and performance also seem unrelated.

Childress, M. E.↗
NASA NTRS1992

Low bandwidth robust controllers for flight

During the final reporting period (Jun. - Dec. 1992), analyses of the longitudinal and lateral flying qualities were made for propulsive-only flight control (POFC) of a Boeing 720 aircraft model. Performance resulting from compensators developed using Quantitative Feedback Theory (QFT) is documented and analyzed. This report is a first draft of a thesis to be presented by graduate student Hwei-Lan Chou. The final thesis will be presented to NASA when it is completed later this year. The latest landing metrics related to bandwidth criteria and based on the Neal-Smith approach to flying qualities prediction were used in developing performance criteria for the controllers. The compensator designs were tested on the NASA simulator and exhibited adequate performance for piloted flight. There was no significant impact of QFT on performance of the propulsive-only flight controllers in either the longitudinal or lateral modes of flight. This was attributed to the physical limits of thrust available and the engine rate of response, both of whiih severely limited the available bandwidth of the closed-loop system.

Biezad, Daniel J.↗
NASA NTRS1984

Performance test results of a low cost GPS time and frequency monitor

Final prototype and pilot production performance test results was presented on a single channel C/A code GPS receiver that was optimized for time and frequency applications. Timing accuracy and stability test results are presented, as well as position determination results. Timing accuracy, timing stability, frequency stability, position accuracy and position stability are presented in the results.

Hyatt, R. C.↗
NASA NTRS2019

Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) Project: ACAS Xu HITL Overview

This presentation provides an overview of a recently completed human-in-the-loop simulation, conducted as part of the Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) Project. This study examined how to present resolution advisories (RAs) issued by Airborne Collision Avoidance System (ACAS) Xu, which can be in the vertical dimension, the horizontal dimension, or both (i.e., "blended"). The study varied the location of the ACAS Xu traffic information - it was either presented within an 'integrated' display or a 'standalone' display, where the traffic information was separated from the vehicle control interfaces and navigational information. The presentation covers the test set-up, scenario design, and facilities utilized in this experiment. The primary dependent variables are listed, but no detailed results are included in this outbrief since data analysis is still underway. Goal: assess ACAS Xu Run 5 in a HITL setting to measure pilot & system performance – RWC alerting and guidance – RA alerting and guidance • Horizontal-only, vertical-only, and blended RAs • Strengthening RAs, reversals and added/removed RAs during blended maneuvers – Incorporate realistic sensor noise into the simulation environment – Compare pilot and DAA system performance back to NASA’s Phase 1 DAA MOPS V&V HITL • We leveraged the findings of an engineering analysis conducted in March to help inform how to implement the Xu logic – Part 1 focused on how to display horizontal-only, vertical-only and blended RAs – Part 2 focused on how to display automated RA responses Xu Engineering Analysis Results Part 1 objectives: – Characterize pilot responses to (canned) ACAS Xu RAs in a variety of display configurations • With vs. Without text accompaniment • Simple vs. ‘Advanced’ aural alerting • Results – Pilots struggled to meet 5 seconds initial response requirement • Particularly against horizontal and blended RAs – Pilots failed to respond more quickly to secondary RAs • Expected response time to subsequent RAs = 2.5 seconds No clear effect of the different alerting conditions on response times – Response times primarily driven by RA type • Pilots demonstrated high level of compliance with RAs and self-reported Xu alerting and guidance as being acceptable – 1/5 reported text as being necessary – 4/5 wanted the aural alert to retain the original RA sequence (i.e., issue a follow-on RA second rather than first) – 4/5 wanted to retain the “Maintain Heading/Vertical Speed” aural alert in the event that the pilot reached their target response at the time of secondary RA Based on these results, we decided on the following for the HITL experimental design: – Incorporated an ‘auto-fill’ feature in Vigilant Spirit that removes the need for pilots to manually enter a heading or altitude for RAs • Pilots only have to click ‘Send’ to upload the RA target heading/altitude – Did not include an RA ‘text box’ • The auto-fill feature largely replaces the purpose of the text box – Using a combination of the ‘Basic’ and ‘Advanced’ aural alerting • In case of blended maneuvers will issue “Maintain Heading/Vertical Rate” if pilot has reached 1st RA target at the time the 2nd RA is issued • Integration and testing with Xu Run 5 also resulted in us adding display logic to modify how horizontal RAs are presented – Target heading was shown to update at approx. 1 Hz making it difficult for pilots to implement – Display logic limited horizontal RA strengthening to once every 5 seconds • Did not impact timing of reversals, new RAs (i.e., blended), or CoC Engineering Analysis Results

human systems integration↗
NASA NTRS2002

The Efficacy of Using Synthetic Vision Terrain-Textured Images to Improve Pilot Situation Awareness

The General Aviation Element of the Aviation Safety Program's Synthetic Vision Systems (SVS) Project is developing technology to eliminate low visibility induced General Aviation (GA) accidents. SVS displays present computer generated 3-dimensional imagery of the surrounding terrain on the Primary Flight Display (PFD) to greatly enhance pilot's situation awareness (SA), reducing or eliminating Controlled Flight into Terrain, as well as Low-Visibility Loss of Control accidents. SVS-conducted research is facilitating development of display concepts that provide the pilot with an unobstructed view of the outside terrain, regardless of weather conditions and time of day. A critical component of SVS displays is the appropriate presentation of terrain to the pilot. An experimental study is being conducted at NASA Langley Research Center (LaRC) to explore and quantify the relationship between the realism of the terrain presentation and resulting enhancements of pilot SA and performance. Composed of complementary simulation and flight test efforts, Terrain Portrayal for Head-Down Displays (TP-HDD) experiments will help researchers evaluate critical terrain portrayal concepts. The experimental effort is to provide data to enable design trades that optimize SVS applications, as well as develop requirements and recommendations to facilitate the certification process. In this part of the experiment a fixed based flight simulator was equipped with various types of Head Down flight displays, ranging from conventional round dials (typical of most GA aircraft) to glass cockpit style PFD's. The variations of the PFD included an assortment of texturing and Digital Elevation Model (DEM) resolution combinations. A test matrix of 10 terrain display configurations (in addition to the baseline displays) were evaluated by 27 pilots of various backgrounds and experience levels. Qualitative (questionnaires) and quantitative (pilot performance and physiological) data were collected during the experimental runs. This paper focuses on the experimental set-up and final physiological results of the TP-HDD simulation experiment. The physiological measures of skin temperature, heart rate, and muscle response, show a decreased engagement (while using the synthetic vision displays as compared to the baseline conventional display) of the sympathetic and somatic nervous system responses which, in turn, indicates a reduced level of mental workload. This decreased level of workload is expected to enable improvement in the pilot's situation and terrain awareness.

Uenking, Michael D.↗
NASA NTRS2011

Simulating Visual Attention Allocation of Pilots in an Advanced Cockpit Environment

This paper describes the results of experiments conducted with human line pilots and a cognitive pilot model during interaction with a new 40 Flight Management System (FMS). The aim of these experiments was to gather human pilot behavior data in order to calibrate the behavior of the model. Human behavior is mainly triggered by visual perception. Thus, the main aspect was to setup a profile of human pilots' visual attention allocation in a cockpit environment containing the new FMS. We first performed statistical analyses of eye tracker data and then compared our results to common results of familiar analyses in standard cockpit environments. The comparison has shown a significant influence of the new system on the visual performance of human pilots. Further on, analyses of the pilot models' visual performance have been performed. A comparison to human pilots' visual performance revealed important improvement potentials.

Frische, F.↗
NASA NTRS1999

Piloted Simulation Study of a Dual Thrust-Cutback Procedure for Reducing High-Speed Civil Transport Takeoff Noise Levels

A piloted simulation study was performed for the purpose of indicating the noise reduction benefits and piloting performance that could occur for a typical 4-engine high-Speed Civil Transport (HSCT) configuration during takeoff when a dual thrust-cutback procedure was employed with throttle operation under direct computer control. Two thrust cutbacks were employed with the first cutback performed while the vehicle was accelerating on the run-way and the second cutback performed at a distance farther downrange. Added vehicle performance improvements included the incorporation of high-lift increments into the aerodynamic database of the vehicle and the use of limited engine oversizing. Four single-stream turbine bypass engines that had no noise suppression of any kind were used with this configuration. This approach permitted establishing the additional noise suppression level that was needed to meet Federal Air Regulation Part 36 Stage 3 noise levels for subsonic commercial jet aircraft. Noise level results were calculated with the jet mixing and shock noise modules of the Aircraft Noise Prediction Program (ANOPP).

Riley, Donald R.↗
NASA NTRS1989

Performance comparisons of nuclear thermal rocket and chemical propulsion systems for piloted missions to Phobos/Mars

Performance capability of nuclear thermal rocket (NTR) and chemical propulsion systems, operating with and without aerobraking, are compared for a selected set of Mars mission opportunities in the 2000 to 2020 timeframe. Both high- and low-energy mission opportunities are investigated. Results are presented as the required initial mass in low earth orbit (IMLEO) to perform the missions. Missions exclusively using chemical propulsion systems have the greatest initial masses. Significant mass reductions are realized by utilizing either aerobrake or NTR technology or both. As mission energy requirements increase, the benefit of implementing aerobrake or NTR technology increases, resulting in IMLEO mass reductions on the order of 60 to 75 percent when compared with all-propulsive chemical missions. By combining both advanced technologies, still greater mass reductions are possible.

Borowski, S. K.↗