Results for “Portfolio” — Page 24

NASA NTRS2022

Satellite Data Applications for Sustainable Energy Transitions

Transitioning to a sustainable energy system poses a massive challenge to communities, nations, and the global economy in the next decade and beyond. A growing portfolio of satellite data products is available to support this transition. Satellite data complement other information sources to provide a more complete picture of the global energy system, often with continuous spatial coverage over targeted areas or even the entire Earth. We find that satellite data are already being applied to a wide range of energy issues with varying information needs, from planning and operation of renewable energy projects, to tracking changing patterns in energy access and use, to monitoring environmental impacts and verifying the effectiveness of emissions reduction efforts. While satellite data could play a larger role throughout the policy and planning lifecycle, there are technical, social, and structural barriers to their increased use. We conclude with a discussion of opportunities for satellite data applications to energy and recommendations for research to maximize the value of satellite data for sustainable energy transitions.

energy↗

NASA NTRS2023

Orbital Debris Remediation: Should We Move, Remove, or Reuse Debris?

One way of reducing the risks orbital debris poses to spacecraft operators is to remediate or “clean up” debris. A piece of debris can be remediated by removing it from space, moving it to avoid collision, or finding a way to recycle it. It is unclear which is the best option, so this panel will explore the trade-offs and move toward developing the best possible portfolio to clean up the orbital environment.

Thomas Colvin↗

NASA NTRSDate not supplied

LANDO: Developing Autonomous Payload Offloading Capabilities for Lunar Surface Operations

Introduction: The Lightweight Surface Manipulation System (LSMS) AutoNomy capabilities Development for surface Operations and construction (LANDO) project is an Early Career Initiative selected for funding by NASA Space Technology Mission Directorate. LANDO is developing a general-purpose autonomy framework applicable to serial and tension-actuated manipulation agents, that will be validated using an existing prototype of the LSMS-L35 (35-kg wrist lift capacity on the lunar surface [Fig. 1], sized for a Commercial Lunar Pay-load Services (CLPS) mission). The autonomous LSMS-L35 will be used to demonstrate autonomous payload handling capabilities for Lunar and other planetary surfaces, directly addressing STMD capability gaps in autonomous excavation and construction operations, advanced robotics and spacecraft autonomy technologies, and technologies supporting emerging space industries including the In-Space Servicing, Assembly and Manufacturing national strategy. LSMS: The LSMS is a tension actuated robotic agent that is scalable (reach and lifting capacity in different gravity environments), versatile (types of surface operations), and reusable. Compared to serial arms, the LSMS provides significantly higher structural efficiency and mechanical advantage, enabling a greater payload lift capacity at a lower system mass. The LSMS is envisioned to be a crucial part of the excavation and construction portfolio, capable of supporting a variety of activities on the lunar surface. Autonomous payload handling is one of the first activities the LSMS can support that develops capabilities that are extensible to other surface operations. Payload handling is required to: remove payloads from a lander; place payloads on mobile agents for transport from a lander to construction site/assembly point; emplace payloads in their operational configuration, and aggregate components to create an asset. As an example of this critical gap, manifested CLPS missions do not currently have a ubiquitous payload offloading capability; payloads (excluding rovers) are designed to remain on the lander. Why Autonomy? Autonomous robotic systems capable of carrying out excavation and construction operations are a fundamental and critical capability required for realizing the NASA Artemis program vision to “emplace and build the infrastructure, systems, and robotic missions that can enable a sustained lunar surface presence.” While teleoperation is still feasible for lunar surface operations, increased latency at Mars will require validated supervised autonomous technologies capable of operating with minimal human involvement (human-on-the-loop) unless an unexpected event occurs requiring human intervention. Autonomy reduces operator burden, allows operations to continue during uncrewed periods, in-creases the safety of operations by automatically detecting and handling faults, and allows operating in high latency environments. Development Activities: LANDO is extending critical autonomous operations to the manipulation domain and creating an integrated system, based on reusable software modules, that is capable of planning and executing payload handling and autonomous surface operations without requiring hu-man intervention beyond a supervisory role. The priority features under development are 1) autonomously offload payloads from a tilted lander deck without buckling the LSMS; 2) sensing whether a payload is safe to lift and handle; and 3) integrate with Astrobotic’s CLPS lander. The poster presentation will highlight current development activities over the past year on LSMS-L35 prototype hard-ware design, and autonomy software.

in-space assembly↗

NASA NTRSDate not supplied

National Campaign Partner Demonstration Team Annual Review April 2023

- NASA developed the Advanced Air Mobility Project (AAM) and the National Campaign (NC) series to identify and address challenges ahead for advanced air mobility concepts. - NC seeks to challenge industry as follows; - Execute progressively more difficult ecosystem-wide system-level safety and integration scenarios - Demonstrate practical and scalable system concepts - Build a knowledge base for development of requirements and standards - There are currently three focus areas within the NASA AAM NC Portfolio - Vehicle Development and Operations: test and inform capabilities that are critical enablers for AAM such as electric aircraft propulsion and increasing levels of automation - Airspace Design and Operations: develop and validate an operational concept to integrate and manage AAM traffic safely and efficiently - Community Integration: understand and address critical barriers to community integration, such as public acceptance (noise, security, privacy, etc.), supporting infrastructure, and local regulation

Eric N Becker↗

NASA NTRSDate not supplied

NASA Icing Overview 2023

This presentation summarizes NASA icing research for an invited talk to be presented on June 22, 2023, at the SAE International Conference on Icing of Aircraft, Engines, and Structures. The presentation describes the NASA icing portfolio including facilities and computational tools. In addition, high-level summaries of NASA’s current icing research activities are provided. This includes: (1) Transonic Truss Brace Wing, (2) High Lift Common Research Model, (3) Advanced Air Mobility, (4) Characterization of Low Ice Adhesion Materials, (5) High Ice Water Content Flight Research, (6) Simulated Inter-compressor Duct Research Model, (7) Efficient Quiet Integrated Propulsor. Finally, the presentation summarizes collaboration and partnership opportunities with NASA.

Icing↗

NASA NTRSDate not supplied

International Space Station as a Testbed for Exploration Environmental Control and Life Support Systems - 2023 Status

Human exploration missions beyond low earth orbit, such as NASA’s Artemis Program, present significant challenges to spacecraft system design and supportability. A particularly challenging area is the Environmental Control and Life Support System (ECLSS) that maintains a habitable and life-sustaining environment for crewmembers. NASA is utilizing the experience gained from its current and prior spaceflight programs to mature life support technologies for exploration missions to deep space. The intent is to establish a portfolio of life support system capabilities with proven performance and reliability to enable human exploration missions and reduce risk to success of those missions. As a fully operational human-occupied platform in microgravity, the International Space Station (ISS) presents a unique opportunity to act as a testbed for exploration-class ECLSS, such that these systems may be tested, proven, and refined for eventual deployment on deep space human exploration missions. This paper will provide an updated status on the testbed development including hardware and ISS vehicle integration progress to date as well as future plans for efforts to design, select, build, test and fly Exploration ECLSS on the ISS.

ECLSS↗

NASA NTRSDate not supplied

Space Station Operations Capabilities in a Shoebox: Marshall Space Flight Center’s Telescience Resource Kit

The International Space Station (ISS) has provided the world an unprecedented capability, establishing a continuous human foothold in outer space for more than 22 years now. But maintaining that capability and supporting the ambitious portfolio of scientific research it hosts has required another unprecedented capability – providing groundbased operations support for the crew and a diverse manifest of research payloads, all simultaneously. To help meet this challenge, NASA’s Marshall Space Flight Center (MSFC) developed TReK, the Telescience Resource Kit, providing a robust solution for data, command, metadata, and file transfer capabilities. In response to an increasingly wide and diverse need for operations support resources, the TReK team has worked to find ways to make the software more flexible in order to support a wide range of missions. Today it has supported not only hundreds of ISS payloads, but also free-flying spacecraft and even aircraft-based research. This presentation will discuss how the team has modified capabilities needed to enable 24/7/365 research aboard ISS to provide the flexibility needed to support Small Sat missions, going back to one of MSFC’s first “minisatellite” missions in 2010 and beyond.

Jeff Lippincott↗

NASA NTRSDate not supplied

International Space Station (ISS) as A Testbed for Exploration Environmental Control and Life Support Systems (ECLSS)- 2023 Status

Human exploration missions beyond low earth orbit, such as NASA’s Artemis Program, present significant challenges to spacecraft system design and supportability. A particularly challenging area is the Environmental Control and Life Support System (ECLSS) that maintains a habitable and life-sustaining environment for crewmembers. NASA is utilizing the experience gained from its current and prior spaceflight programs to mature life support technologies for exploration missions to deep space. The intent is to establish a portfolio of life support system capabilities with proven performance and reliability to enable human exploration missions and reduce risk to success of those missions. As a fully operational human-occupied platform in microgravity, the International Space Station (ISS) presents a unique opportunity to act as a testbed for exploration-class ECLSS, such that these systems may be tested, proven, and refined for eventual deployment on deep space human exploration missions. This paper will provide an updated status on the testbed development including hardware and ISS vehicle integration progress to date as well as future plans for efforts to design, select, build, test and fly Exploration ECLSS on the ISS.

ECLSS↗

NASA NTRSDate not supplied

Control System Development for A Zero Boil-Off Hydrogen Storage Demonstration With Two-Stage Active Cooling

A NASA team is designing and building a test article to demonstrate the long duration storage of liquid hydrogen via active cooling (cryocoolers) while implementing a two-stage cooling approach. This activity is one of a large portfolio of NASA’s Space Technology Mission Directorate funded activities which focuses on the technology maturation needed for long duration storage of cryogenic liquid in-space. The current state-of-the-art for liquid hydrogen storage on-orbit is on the order of hours while NASA’s planned missions require storage for months, or even years. To enable such a long duration, Zero Boil-Off conditions must be achieved which requires passive technologies to minimize environmental heat loads, but also active cooling to intercept and reject the remaining heat to deep space. The implementation of active cooling results in a significant amount of dry mass added to the vehicle. Utilizing a Two-Stage Cooling approach, analysis and testing to date indicates the Zero Boil-Off of liquid hydrogen can be achieved with less mass and electrical power relative to a single-stage cooling approach where only one cryocooler is used. This activity will demonstrate the fully integrated suite of technologies needed to enable the Two-Stage Cooling approach which includes Multi-Layer Insulation blankets, Low Conductivity Structures, a Tube-On-Tank Heat Exchanger, Tube-On-Shield Heat Exchanger and a Two-Stage Cryogenerator (both 90 Kelvin and 20 Kelvin) with each stage having an independently controlled circulation loop. The bulk of the heat load is intercepted by the 90 Kelvin loop via a thin foil heat exchanger internal to the insulation blankets (also known as a Broad Area Cooling Shield), with the remainder removed at cryofluid temperature (20 Kelvin) by tubes directly welded to the outer tank surface. In this paper, we examine the challenges of controlling the system, and describe the development of control algorithms and software for future testing with liquid hydrogen. The interactions between the cryofans which control circulation loop mass flow rates, electrical heaters which vary the cryocooler lift to simulate the operation of variable-lift flight units, tank heaters which can vary the overall heat load, and the effects of changes in circulation loop pressure as temperatures change, can be complex and must be well understood to maintain steady-state propellant conditions and achieve Zero Boil-Off. Parallel PID loops and watchdog programs implemented on the user interface system will help bring the systems to steady state operation and keep them at selected operating points within acceptable error, while avoiding runaway feedback loops.

cryogenics↗

NASA NTRS2023

NASA Team Develops a Test Article to Demonstrate “Zero Boil-Off” Storage of Liquid Hydrogen via Cryocoolers and a Two-Stage Cooling Approach

Funded by NASA’s Technology Demonstration Mission Program and managed by the Cryogenic Fluid Management Portfolio Project, a NASA team is developing a test article to demonstrate the “zero boil-off” storage of liquid hydrogen using active cooling (cryocoolers) and a two-stage cooling approach. The current state of the art for storage of liquid hydrogen on-orbit is on the order of hours while future missions may require storage for months or even years. To enable such extended storage durations, “near zero” propellant loss, or “zero boil-off”, must be achieved. This may be accomplished with the implementation of “near zero” leakage components, a high performing suite of passive technologies to minimize the environmental heat loads, and active cooling via cryocoolers to intercept and remove heat from the propellant tanks and associated structure. Of course, with any cryogenic vehicle and mission, a mass and power trade should be conducted to determine if it is indeed feasible to carry the additional dry mass associated with active cooling, or if one could simply carry additional propellants to accommodate propellant loss which is typically not an option for a long duration mission.

Hydrogen Storage↗

NASA NTRSDate not supplied

Space Station Operations Capabilities in a Shoebox Marshall Space Flight Center’s Telescience Resource Kit

The International Space Station (ISS) has provided the world an unprecedented capability, establishing a continuous human foothold in outer space for more than 22 years now. But maintaining that capability and supporting the ambitious portfolio of scientific research it hosts has required another unprecedented capability – providing groundbased operations support for the crew and a diverse manifest of research payloads, all simultaneously. To help meet this challenge, NASA’s Marshall Space Flight Center (MSFC) developed TReK, the Telescience Resource Kit, providing a robust solution for data, command, metadata, and file transfer capabilities. In response to an increasingly wide and diverse need for operations support resources, the TReK team has worked to find ways to make the software more flexible in order to support a wide range of missions. Today it has supported not only hundreds of ISS payloads, but also free-flying spacecraft and even aircraft-based research. This presentation will discuss how the team has modified capabilities needed to enable 24/7/365 research aboard ISS to provide the flexibility needed to support Small Sat missions, going back to one of MSFC’s first “minisatellite” missions in 2010 and beyond.

Jeff Lippincott↗

NASA NTRSDate not supplied

The NASA Open Science Data Repository: Biomedical Fair Data, Analysis Tools, User Communities, Publications, and Discoveries for Deep Space Missions

Increased biomedical risks and challenges associated with deep space missions require new knowledge discovery, new health countermeasures, and development of novel ecosystems, life support, crop production, and biomedical support capabilities. To meet NASA’s Moon to Mars strategic program goals for Human and Biological Sciences, findable, accessible, interoperable, reusable (FAIR), and maximally open-access data is going to be required to enable humanity to thrive in deep space. Indeed, this cornerstone perspective on FAIR and maximally open access data was also recommended in the recent 2023-2032 Decadal Survey from the National Academies of Sciences, Engineering, and Medicine. The NASA Open Science Data Repository (OSDR) is a maximally open access and FAIR database, and meets various scientific, technical, and operational spaceflight needs. It offers public users and submitters the ability to upload, download, search, share, analyze, and visualize data across ‘omics, physiological, phenotypic, behavioral, bioimaging, video, and environmental monitoring telemetry datasets. OSDR includes NASA GeneLab, NASA Ames Life Sciences Data Archive, and the NASA Biological Institutional Scientific Collection. OSDR has >455 studies with datasets from model organisms and non-NASA human astronauts. There are ~12 datasets from the Inspiration 4 (I4) mission, spanning metagenomics, comprehensive metabolic panels, clonal hematopoiesis, spatial transcriptomics, proteomics, and cytokine panels. In the interest of data privacy, two I4 datasets have raw FASTQ and FASTA files relating to the epitranscriptome, and a new request feature is live in OSDR (with a backend review process established) which was developed based on industry norms. OSDR also recently began a collaboration with the European Space Agency (ESA) to scientifically curate and make available >200 terabytes of human and model organism space-relevant data. The OSDR submission portal is designed to ingest and curate ~25 ‘omics assay data types, and ~50 physiological-phenotypic-imaging assay data types, spanning ultrasonography, micro-computed tomography, histology, morphometric photography, rebound tonometry, gait analysis, optical coherence tomography, novel object recognition, flow cytometry, and immunohistochemistry. A suite of analysis tools are available for OSDR users including: 1) an Environmental Data Application to compare radiation, CO2, relative humidity, temperature, and other telemetry across missions and subjects, 2) the RadLab database, a collaboration between NASA, ESA, the German and Italian Space Agencies, and the Bulgarian Academy of Sciences, which compiles radiation measurements relevant to human spaceflight and provides tools for accessing and manipulating the data, and 3) a Multi-study visualization tool which enables users to look across and combine GeneLab’s omics datasets across different experiments and missions. There are ~600 volunteer OSDR Analysis Working Group (AWG) members who: 1) provide feedback on scientific standards for reuse (subject and assay metadata; processing pipelines; dataset formats and uniformed structures for machine-readability), and 2) collaborate to mine-reuse OSDR data conducting scientific analysis. OSDR has enabled 60 publications as of September 2023, many directly from AWG collaborations most notably the Cell Press package in 2020. Lastly, there are at least 15 articles which mine OSDR data part of a package of ~50 articles across Nature Portfolio with research stemming from I4, the Japan Aerospace Exploration Agency, NASA Space Biology, and the NASA Human Research Program.

space biology↗

NASA NTRSDate not supplied

Additive Manufacturing at NASA

Additive Manufacturing (AM) is certainly changing the space industry and providing new opportunities to travel to low earth orbit and explore our universe. New design opportunities –not previously possible –for new high performance metal alloys, light-weighting, managing thermal, structural, and dynamic loads are being enabled by AM. This presentation will showcase the vast portfolio of NASA’s AM activities in the last 12 years; transportation from Earth to Destination, Habitat at Destination, Lander from Station to Surface, and Science mission spacecrafts. NASA’s technical excellence is being leveraged heavily in the AM community thru collaborative projects, partnership agreements, tech transfer program. Challenges as well as opportunities will be discussed.

Alison Park↗

NASA NTRS2023

ECLSS Evolution

Environmental Control and Life Support Systems (ECLSS) Evolution is comprised of a large portfolio of projects funded by the Mars Campaign Office (MCO) and is focused on the following: - Utilize ISS as a testbed to determine and refine ECLSS gaps - Develop technologies to close ECLSS gaps - Improve performance and reliability of ECLS systems - Prove out integrated system in relevant environment for long duration - Test representative system on ground to increase overall data set

ECLSS↗

NASA NTRS2024

International Space Station as a Testbed for Exploration Environmental Control and Life Support Systems - 2024 Status

Human exploration missions beyond low earth orbit, such as NASA’s Artemis Program, present significant challenges to spacecraft system design and supportability. A particularly challenging area is the Environmental Control and Life Support System (ECLSS) that maintains a habitable and life-sustaining environment for crewmembers. NASA is utilizing the experience gained from its current and prior spaceflight programs to mature life support technologies for exploration missions to deep space. The intent is to establish a portfolio of life support system capabilities with proven performance and reliability to enable human exploration missions and reduce risk to success of those missions. As a fully operational human-occupied platform in microgravity, the International Space Station (ISS) presents a unique opportunity to act as a testbed for exploration-class ECLSS, such that these systems may be tested, proven, and refined for eventual deployment on deep space human exploration missions. This paper will provide an updated status on the testbed development including hardware and ISS vehicle integration progress to date as well as future plans for efforts to design, select, build, test and fly Exploration ECLSS on the ISS.

ECLSS↗

NASA NTRSDate not supplied

Aeroacoustic Analysis using Dynamic Mode Decomposition of Unsteady Pressure-Sensitive Paint Measurements

In this paper, we present a new method for the diagnosis and analysis of aeroacoustic phenomena. Taking advantage of the well-known property that the measurements of the Unsteady Pressure-Sensitive Paint (uPSP) have much higher spatial resolution compared to those of the conventional pressure transducers, the method is based on the visualization and analysis of the outputs of the Dynamic Mode Decomposition (DMD) of the uPSP measurements. The uPSP measurements were collected with four Phantom high-speed cameras in the Ascent Transient Aerodynamics Test (ATAT) of the Space Launch System (SLS) Block 1 cargo vehicle in the 11-by-11-foot transonic test section of the Unitary Plan Wind Tunnel (UPWT) at NASA Ames Research Center in September 2019. The method presented in this paper is demonstrated by investigating an interesting phenomenon observed in the SLS ATAT – the vortex shedding tone generated by the forward attachment of the Solid Rocket Booster (SRB). As examples, the DMD outputs of the uPSP measurements in a subsonic test in the SLS ATAT are presented. It is shown the information retrieved from the DMD outputs of the uPSP measurements can be effectively used in the identification and diagnosis of the aeroacoustic phenomena. The work described in this paper is a part of NASA’s development of a new state-of-the-art uPSP capability in production wind tunnels. Funding was provided by the NASA Aerosciences Evaluation and Test Capabilities Portfolio Office.

acoustics↗

NASA NTRSDate not supplied

Aeroacoustic Analysis using Dynamic Mode Decomposition of Unsteady Pressure-Sensitive Paint Measurements

In this paper, we present a new method for the diagnosis and analysis of aeroacoustic phenomena. Taking advantage of the well-known property that the measurements of the Unsteady Pressure-Sensitive Paint (uPSP) have much higher spatial resolution compared to those of the conventional pressure transducers, the method is based on the visualization and analysis of the outputs of the Dynamic Mode Decomposition (DMD) of the uPSP measurements. The uPSP measurements were collected with four Phantom high-speed cameras in the Ascent Transient Aerodynamics Test (ATAT) of the Space Launch System (SLS) Block 1 cargo vehicle in the 11-by-11-foot transonic test section of the Unitary Plan Wind Tunnel (UPWT) at NASA Ames Research Center in September 2019. The method presented in this paper is demonstrated by investigating an interesting phenomenon observed in the SLS ATAT – the vortex shedding tone generated by the forward attachment of the Solid Rocket Booster (SRB). As examples, the DMD outputs of the uPSP measurements in a subsonic test in the SLS ATAT are presented. It is shown the information retrieved from the DMD outputs of the uPSP measurements can be effectively used in the identification and diagnosis of the aeroacoustic phenomena. The work described in this paper is a part of NASA’s development of a new state-of-the-art uPSP capability in production wind tunnels. Funding was provided by the NASA Aerosciences Evaluation and Test Capabilities Portfolio Office.

acoustics↗

NASA NTRSDate not supplied

Technology Drives Exploration: How NASA Is Embracing Additive Manufacturing

NASA has over 60 years of technology development that enabled human space and space science exploration “for the benefit of all humankind”. This presentation will start with the overview of NASA’s organization structure; the roles NASA’s leadership plays as well as 10 regional centers’ focused areas and capabilities. It will also highlight NASA’s Mission Directorates –Science, Human, Aeronautics, and Technology. With the onset of the newer and still evolving procurement business model (NASA being a buyer, instead of maker), a question remains: which is the right framework under which NASA can best integrate the capabilities of commercial, international, and other US government entities into a coherent exploration strategy? Another critical consideration is identifying which critical technologies to invest in NASA and which capabilities are better suited for commercialization as NASA as a buyer. Additive Manufacturing (AM) is certainly changing the space industry and providing new opportunities to travel to low earth orbit and explore our universe. New design opportunities –not previously possible –for new high performance metal alloys, light-weighting, managing thermal, structural, and dynamic loads are being enabled by AM. This presentation will showcase the vast portfolio of NASA’s AM activities in the last 13 years; transportation from Earth to Destination, Habitat at Destination, Lander from Station to Surface, and Science mission spacecrafts. NASA’s technical excellence is being leveraged heavily in the AM and Commercial Space community through collaborative projects, partnership agreements, tech transfer program. Examples of challenges of AM implementation as well as opportunities will be discussed.

Alison Park↗