SEARCH · Search NASA

Results for “Process Sample Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

NASA NTRS1976

Low-gravity homogenization and solidification of aluminum antimonide

The III-V semiconducting compound AlSb shows promise as a highly efficient solar cell material, but it has not been commercially exploited because of difficulties in compound synthesis. Liquid state homogenization and solidification of AlSb were carried out in the Apollo-Soyuz Test Project Experiment MA-044 in the hope that compositional homogeneity would be improved by negating the large density difference between the two constituents. Post-flight analysis and comparative characterization of the space-processed and ground-processed samples indicate that there are major homogeneity improvements in the low-gravity solidified material.

Ang, C.-Y.↗

NASA NTRS1986

Microfossils in the Antarctic cold desert: Possible implications for Mars

In the Ross Desert of Antarctica, the principal life form is the cryptoendolithic microbial community in the near-surface layers of porous sandstone rocks. Biological, geological, and climatic factors interact in a complex and precarious balance, making life possible in an otherwise hostile environment. Once this balance is tipped, fossilization sets in. In the reverse case, new colonization of the rock surface may be initiated. As a result, fossilization is contemporary with modern life and both may be simultaneously present in a mosaic pattern. Also, different stages of fossilization are present. The process of fossilization takes place in a nonaquatic environment. If primitive life ever appeared on Mars, it is possible that with increasing aridity, life withdrew into an endolithic niche similar to that in the Antarctic desert. Fossilization in a nonaquatic environment may have set in with the result that traces of past life could be preserved. If such was the case, the study of the fossilization process in Antarctica may hold useful information for the analysis of Martian samples for microfossils.

Friedmann, E. I.↗

NASA NTRS1971

Automated Drug Identification for Urban Hospitals

Many urban hospitals are becoming overloaded with drug abuse cases requiring chemical analysis for identification of drugs. In this paper, the requirements for chemical analysis of body fluids for drugs are determined and a system model for automated drug analysis is selected. The system as modeled, would perform chemical preparation of samples, gas-liquid chromatographic separation of drugs in the chemically prepared samples, infrared spectrophotometric analysis of the drugs, and would utilize automatic data processing and control for drug identification. Requirements of cost, maintainability, reliability, flexibility, and operability are considered.

Shirley, Donna L.↗

NASA NTRS2025

Influence of Microgravity on Bacterial Pathogen Virulence and Immune Cell Function—Relevance for Infectious Disease Risk During Spaceflight

Spaceflight has measurable impacts on astronaut immune profiles as well as the virulence patterns of bacterial pathogens. Data with respect to human immunity indicate diminished T and NK cell function, altered cytokine profiles, persistent inflammation, and latent herpesvirus reactivation. Furthermore, evaluation of International Space Station (ISS) crewmembers gives evidence of compromised immunity, including atypical allergy, infectious disease, and dermatitis. Data with respect to certain human bacterial pathogens suggest modified virulence that may be enhanced. It is therefore critical to examine this interaction of immune dysregulation and increased microbial virulence and whether it might synergistically increase the risk of infectious disease to crew members. The goal of this study is to use modeled microgravity to study the impact of medically significant ISS bacteria that may have altered virulence on the immune response of the host. This study consists of two primary aims to assess this relationship. First, immune cells will be collected from healthy test subjects and cultured in static or in modeled microgravity conditions together with either control pathogens or with microgravity conditioned pathogens that were grown in bioreactors. Second, immune cells will be collected from astronauts before, during, and after flight and co-cultured with the control or the microgravity conditioned bacteria. Three pathogens were selected for this investigation: Pseudomonas aeruginosa , Salmonella enterica serovar Enteritidis and Burkholderia cepacia . Previously, the optimal cell to bacteria ratios that produce the greatest immune cell responses have been derived for these three bacteria. Cellular activation, as determined by the induction of cell surface activation markers and cytokine profiles, will be measured. Interactions between cells and bacteria will be assessed using fluorescent and electron microscopy techniques. This study will provide critical information to help understand how microgravity alters microbial virulence and the associated infectious disease risk to crewmembers during spaceflight missions. Over the past year, the Immunology and Microbiology laboratories at NASA Johnson Space Center have collaborated to process the astronaut subject samples to complete the last year of the flight portion of this study. This included the completion of four astronaut subjects full mission sampling sets. Sample processing included innate and adaptive cell flow cytometry as well as analysis of cytokine concentrations in the supernatant. The ground control segment of the study will take place during FY25 which involves parallel infections run under static and clinostat conditions. The acquired data sets over this 3-year study are now being analyzed to provide a comprehensive set of results and conclusions that will contribute to a more effective risk assessment for astronauts during spaceflight regarding this host-pathogen context.

Immunology↗

DOE OSTI2014

Laboratory and Field Testing of Commercially Available Detectors for the Identification of Chemicals of Interest in the Nuclear Fuel Cycle for the Detection of Undeclared Activities

Traditionally, IAEA inspectors have focused on the detection of nuclear indicators as part of infield inspection activities. The ability to rapidly detect and identify chemical as well as nuclear signatures can increase the ability of IAEA inspectors to detect undeclared activities at a site. Identification of chemical indicators have been limited to use in the analysis of environmental samples. Although IAEA analytical laboratories are highly effective, environmental sample processing does not allow for immediate or real-time results to an IAEA inspector at a facility. During a complementary access inspection, under the Additional Protocol, the use of fieldable technologies that can quickly provide accurate information on chemicals that may be indicative of undeclared activities can increase the ability of IAEA to effectively and efficiently complete their mission. The Complementary Access Working Group (CAWG) is a multi-laboratory team with members from Brookhaven National Laboratory, Idaho National Laboratory, Los Alamos National Laboratory, and Sandia National Laboratory. The team identified chemicals at each stage of the nuclear fuel cycle that may provide IAEA inspectors with indications that proliferation activities may be occurring. The group eliminated all indicators related to equipment, technology and training, developing a list of by-products/effluents, non-nuclear materials, nuclear materials, and other observables. These proliferation indicators were prioritized based on detectability from a conduct of operations (CONOPS) perspective of a CA inspection (for example, whether an inspector actually can access the S&O or whether it is in process with no physical access), and the IAEA’s interest in the detection technology in conjunction with radiation detectors. The list was consolidated to general categories (nuclear materials from a chemical detection technique, inorganic chemicals, organic chemicals, halogens, and miscellaneous materials). The team then identified commercial off the shelf (COTS) chemical detectors that may detect the chemicals of interest. Three chemical detectors were selected and tested both in laboratory settings and in field operations settings at Idaho National Laboratory. The instruments selected are: Thermo Scientific TruDefender FT (FTIR), Thermo Scientific FirstDefender RM (Raman), and Bruker Tracer III SD (XRF). Functional specifications, operability, and chemical detectability, selectivity, and limits of detection were determined. Results from the laboratory and field tests will be presented. This work is supported by the Next Generation Safeguards Initiative, Office of Nonproliferation and International Security, National Nuclear Security Administration.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2013

Methods for Heel Retrieval for Tanks C-101, C-102, and C-111 at the Hanford Site - 13064

The purpose of this paper is to evaluate the prospects of using bulk waste characteristics to determine the most appropriate heel retrieval technology. If the properties of hard to remove heels can be determined before bulk retrieval, then a heel retrieval technology can be selected before bulk retrieval is complete. This would save substantially on sampling costs and would allow the deployment of the heel retrieval technology immediately after bulk retrieval. The latter would also accelerate the heel removal schedule. A number of C-farm retrievals have been fully or partially completed at the time of this writing. Thus, there is already substantial information on the success of different technologies and the composition of the heels. There is also substantial information on the waste types in each tank based on historical records. Therefore, this study will correlate the performance of technologies used so far and compare them to the known waste types in the tanks. This will be used to estimate the performance of future C Farm heel retrievals. An initial decision tree is developed and employed on tanks C-101, C-102, and C 111. An assumption of this study is that no additional characterization information would be available, before or after retrieval. Note that collecting additional information would substantially increase the probability of success. Deploying some in-situ testing technologies, such as a water lance or an in-situ Raman probe, might substantially increase the probability of successfully selecting the process conditions without having to take samples from the tanks for laboratory analysis. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2018

Effects of Chemical Wastes on Concrete through Spectroscopic and Computational Models - 18405

Liquid mercury was used as a coolant for early fast reactors, as catalyst in the dissolution of uranium alloy fuels, lithium isotope separation and other processes. Cesium is produced during nuclear fission reactions within the reactor. The interaction between chemical contaminants and solid structures can cause structural damages (e.g. dislocations) and consequently modify the material's mechanical properties. Another problem associated with the interaction of chemical contaminants and metal structures is corrosion pitting. Mercury intrusion porosimetry (MIP) has been utilized to investigate the pore structure of the cement material. The overall goal of this project is to determine the physiochemical interactions of Hg and Cs to steel and concrete using spectroscopic analysis: - Evaluate the physicochemical interactions of Hg and Cs to steel and concrete using spectroscopic techniques under standard conditions; - Evaluate the impact of environmental conditions (temp., salt content, pH, and time) on the physicochemical interactions of Hg and Cs to steel and concrete using spectroscopic techniques. Conclusion and Future Work: Adsorption process depends on the surface morphology. Surface morphology analysis demonstrated that concrete samples had a heterogenous surface. Adsorption of Mercury and Cesium are more favorable onto heterogeneous regions such as edges, grooves, and wrinkles. The mechanism for cation removal by concrete includes surface complexation and ion exchange. Overall adsorption of Mercury was more favorable than Cesium onto concrete. Continuing investigations will be focusing on application considerations such as multicomponent interactions and desorption studies.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2026

Novel Cell-Type-Specific Drought-Responsive Proteins in Root Tips of Field-Grown Perennial Switchgrass

The root-tip region of plants, including the root cap, forms the most basal terminal of the root and exhibits a high degree of cellular complexity in terms of morphology, cytological function, and interaction with environmental cues in the soil. Cells in this region follow a developmental trajectory, transitioning from stem cells to meristematic cells, and ultimately to fully differentiated cell types. However, our understanding of root-tip cell-type specific proteomic responses to abiotic stresses, such as drought, particularly under field conditions, remains limited. This study aimed to identify spatially resolved, cell type-specific proteomes in switchgrass (Panicum virgatum) root tips under drought stress. Root tips were collected from seven-year-old, field-grown switchgrass ‘Alamo’ plants excavated under both well-watered and long-term drought conditions. Cell type-specific proteins were identified using laser capture microdissection (LCM) coupled with nanoPOTS (Nanodroplet Processing in One Pot for Trace Samples) and nano-LC-MS proteomics analysis. Five distinct cell types were targeted: (1) cells in the quiescent center and stem cell niche (QuC), (2) protodermal epidermal cells (PEC) in the meristematic zone, (3) epidermal cells in the transition and elongation zones above the root cap (Epi), (4) peripheral root cap cells (PRC), forming 2–3 layers below the PEC and 1–2 layers above the root border cells, and (5) columella root cap cells (Col) comprising of the columella initials and a single underlying layer of cells undergoing active growth. Principal component analysis (PCA) revealed clear separation among the five targeted cell types, confirming distinct proteomic profiles. Proteins predominantly enriched in each cell type were linked to distinct cellular functions, with QuC cells showing involvement in chromosomal behavior, DNA replication, and mitosis—key processes for stem cell niche regulation. Drought stress resulted in alterations of proteostasis, as evidenced by significant decreases in ribosomal proteins and increases in protein synthesis inhibitors. Moreover, drought stress induced unique cell-type–specific proteins involved in phytohormone biosynthesis and signaling pathways, including auxin, cytokinin, and jasmonic acid. In particular, QuC cells were more highly enriched in proteins associated with DNA repair and mitotic processes. Metabolic pathways related to amino acids, carbohydrates, and lipids were differentially affected in a cell-type–dependent manner, whereas general stress-responsive proteins exhibited consistent changes across all five cell types. Overall, this study provides unique spatially resolved, cell-type-specific proteomic profiles in root tips, representing a significant advancement in our understanding of the cellular mechanisms underlying plant responses to drought stress in natural field conditions.

perennial grass↗

NASA NTRS2006

Tool for Sampling Permafrost on a Remote Planet

A report discusses the robotic arm tool for rapidly acquiring permafrost (RATRAP), which is being developed for acquiring samples of permafrost on Mars or another remote planet and immediately delivering the samples to adjacent instruments for analysis. The prototype RATRAP includes a rasp that protrudes through a hole in the bottom of a container that is placed in contact with the permafrost surface. Moving at high speed, the rasp cuts into the surface and loads many of the resulting small particles of permafrost through the hole into the container. The prototype RATRAP has been shown to be capable of acquiring many grams of permafrost simulants in times of the order of seconds. In contrast, a current permafrost sampling system that the RATRAP is intended to supplant works by scraping with tines followed by picking up the scrapings in a scoop, sometimes taking hours to acquire a few grams. Also, because the RATRAP inherently pulverizes the sampled material, it is an attractive alternative to other sampling apparatuses that generate core or chunk samples that must be further processed by a crushing apparatus to make the sample particles small enough for analysis by some instruments.

Peters, Gregory↗

DOE OSTI2025

Development and Demonstration of a Prototype Molten Salt Sampling System

Molten salt reactors (MSRs) offer potential operability and safety advantages when compared to commercial light water reactors (LWRs). However, operating experience with MSRs is sparse in comparison to what exists for LWRs. Further, the chemical and isotopic composition of the fuel and/or coolant salt is dynamic and difficult to characterize continuously, posing potential safety, operability, and safeguards unknowns that need to be addressed. A molten salt sampling system (MSSS) is regarded as a necessary subsystem within first generation MSRs used to obtain samples of salt for chemical and isotopic analysis in support of the need to monitor and control salt composition during operation. The MSSS is being developed using the Safety-in-Design (SiD) methodology, which incorporates incremental integration of safety analysis into the design process. The MSSS conceptual design emerging from the application of the early stages of the SiD methodology consists of a sample collection system and its housing, a freeze port, and inert gas control and delivery systems. This article describes the prototypes developed to test the functions of these MSSS subsystems, presents the results of testing in both dry and molten salt environments (including reliability data collection performed in accordance with the principles of SiD and the development of a semiquantitative fault tree model), and summarizes the opportunities for future design and testing enhancements based on the results of prototype testing.

molten salt reactor↗

NASA NTRSDate not supplied

MAB Phase Ceramics for Lunar Applications

During the ten-week internship my work focused on designing characterization protocol for 3D printed MAB phase ceramics on steel and Tiplates. I was mentored by Dr. Samuel Hocker of NASA and advised by Dr. Gupta from University of North Dakota. I also collaborated with Mackenzie Short from the University of North Dakota. The characterization protocol was divided into following steps; initially, we performed visual inspection of the plates. During this process, the coatings which spalled or delaminated were discarded for further evaluation. During the next step, we performed optical microscopy to discern and document surface features and porosities of the samples. We also noted some decomposition under the optical microscope as well. Thereafter, profilometry analysis was performed to understand the effect of power density on the surface roughness. Due to the deposited powder over the samples, the profilometry was inconclusive. We then cleaned the samples on the steel plate using ethanol and cotton swabs to wipe up the loose powder covering the samples. Detailed SEM analysis was then performed on the cleaned specimens. In parallel, the 3D printed samples on the Tiplate were cleaned by using an ultrasonic bath for 1h. Optical imaging showed that this cleaning process was more effective for cleaning except that small cracks propagated through the layered ceramics. The profilometry data gathered on the titanium plate after cleaning was more conclusive. The SEM data on the steel plate showed that there is decomposition at all wattages although at 100 W the extent of decomposition was lower. We are planning to characterize the steel samples after cleaning in ultrasonic bath for 5-10 min to minimize cracking during the cleaning process. In addition, we are also planning to study the fractured surface by SEM analysis.

Additive Manufacturing, Laser Powder Bed Fusion, S↗

NASA NTRS2020

Thermal Decomposition of the Murchison CM2 Carbonaceous Chondrite: Implications of Space Weathering Processes for Sample Return Missions

Primitive carbonaceous asteroids are the target bodies for the JAXA Hayabusa2 mission to Ryugu and the NASA OSIRIS-REx mission to Bennu. Both asteroids share spectral characteristics of CI/CM type carbonaceous chondrites. Ryugu, in particular, appears to have undergone thermal processing that has modified its spectral properties. The nature and extent of space weathering processes on the surfaces of Bennu and Ryugu are under active investigation using remote sensing data from the missions [4] and through laboratory studies on analog materials. The analog studies are needed in order to understand the mineralogical and chemical changes that occur in space weathered samples that give rise to the observed optical effects measured by remote-sensing and to prepare for the analysis of returned samples. The space weathering effects of micrometeorite impact and solar wind irradiation on primitive carbonaceous chondrites have been simulated by analog studies on the Murchison CM2 chondrite. We performed a coordinated mineralogical, chemical and spectroscopic study to examine in detail the effects of thermal metamorphism on Murchison samples as an analog to processes that may have occurred on Ryugu. The bulk measurements including X-ray diffraction (XRD), Mössbauer spectroscopy, UV-VIS-NIR spectroscopy, thermogravimetric analysis, and evolved gas analysis are reported in a companion paper. Here we report on our preliminary nanoscale mineralogical and chemical analyses of pre- and post-heated Murchison samples using multiple electron beam techniques to understand how the mineralogical, chemical, and physical characteristics of carbonaceous chondrites change with increasing thermal effects.

Lee, S.↗

DOE OSTI2014

Processing of Neutron Diffraction Data for Strain Measurement in Geological Materials

: Conventional rock mechanics testing techniques typically involve the loading of samples and measurement of displacements or strains on the outer boundary of the specimen surface. Neutron diffraction based strain measurement techniques represent a unique and powerful tool for measuring the strain within geological materials under load. The structural variability and non-uniform crystallinity of geological materials, however, create many complexities in the intensity patterns that must be analyzed to quantify strains within the material. The attenuating and scattering properties of the pressure cell housing the sample further add difficulties to the data analysis. This paper describes the methods and processes used to process neutron scattering data for strain measurement in geological materials. It is intended to provide a primer for those in the rock mechanics community that are interested in utilizing this technique along with additional discussion of neutron diffraction experimental factors that may affect data quality.

Polsky, Yarom↗

NASA NTRS1999

Fidelity Analysis of Sampled Imaging Systems

Many modeling, simulation and performance analysis studies of sampled imaging systems are inherently incomplete because they are conditioned on a discrete-input, discrete-output model that only accounts for blurring during image acquisition and additive noise. For those sampled imaging systems where the effects of digital image acquisition, digital filtering and reconstruction are significant, the modeling, simulation and performance analysis should be based on a more comprehensive continuous-input, discrete-processing, continuous-output end-to-end model. This more comprehensive model should properly account for the low-pass filtering effects of image acquisition prior to sampling, the potentially important noiselike effects of the aliasing caused by sampling, additive noise due to device electronics and quantization, the generally high-boost filtering effects of digital processing, and the low-pass filtering effects of image reconstruction. This model should not, however, be so complex as to preclude significant mathematical analysis, particularly the mean-square (fidelity) type of analysis so common in linear system theory. We demonstrate that, although the mathematics of such a model is more complex, the increase in complexity is not so great as to prevent a complete fidelity-metric analysis at both the component level and at the end-to-end system level: that is, computable mean-square-based fidelity metrics are developed by which both component-level and system-level performance can be quantified. In addition, we demonstrate that system performance can be assessed qualitatively by visualizing the output image as the sum of three component images, each of which relates to a corresponding fidelity metric. The cascaded, or filtered, component accounts for the end-to-end system filtering of image acquisition, digital processing, and image reconstruction; the random noise component accounts for additive random noise, modulated by digital processing and image reconstruction filtering; and the aliased noise component accounts for the frequency folding effect of sampling, modulated by digital processing and image reconstruction filtering.

Park, Stephen K.↗

DOE OSTI2025

Additive Manufacturing of Fe-based Alloys for Nuclear Reactor Environments

This report is a Milestone 2 deliverable in FY2025, under work package MT-25AN090211 to support research and qualification activities supported by the Advanced Materials and Manufacturing Technologies (AMMT) program. It provides an update on the work done on the laser based additive manufacturing of steels for nuclear applications, conducted collaboratively by Argonne National Laboratory and Pacific Northwestern National Laboratory. Building upon FY23 and FY24 efforts, the focus of FY25 includes continued optimization of process parameters for the alloys: A709 & G92. The work package also includes fabricating test samples to conduct a thorough microstructural analysis and perform preliminary mechanical testing. The major accomplishments of this work package are summarized below, applicable to both Laser Powder Bed Fusion (LPBF) processes conducted at Argonne National Laboratory and Laser Powder Directed Energy Deposition (LP-DED) processes conducted at Pacific Northwest National Laboratory.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

NASA NTRS1974

Analysis of proposed air drying process

An air drying process has been analyzed which is intended to reduce the water vapor content of a stratospheric sample to below one part per million by weight, based upon the removal of the water as it passes through a phosphorous pentoxide absorber. The analysis indicates that the method is feasible. Dependence on ram pressure to maintain flow through the absorber appears questionable and consideration should be given to other means.

Greenspan, L.↗

DOE OSTI2026

Direct inference of nuclear equation-of-state parameters from gravitational-wave observations

The observation of neutron star mergers with gravitational waves (GWs) has provided a new method to constrain the dense-matter equation of state (EOS) and to better understand its nuclear physics. However, inferring nuclear microphysics from GW observations necessitates the sampling of EOS model parameters that serve as input for each EOS used during the GW data analysis. The sampling of the EOS parameters requires solving the Tolman–Oppenheimer–Volkoff (TOV) equations a large number of times—a process that slows down each likelihood evaluation in the analysis on the order of a few seconds. Here, we employ emulators for the TOV equations built using multilayer perceptron neural networks to enable direct inference of nuclear EOS parameters from GW strain data. Our emulators allow us to rapidly solve the TOV equations, taking in EOS parameters and outputting the associated tidal deformability of a neutron star in only a few tens of milliseconds. We implement these emulators in PyCBC to directly infer the EOS parameters using the event GW170817, providing posteriors on these parameters informed solely by GWs. We benchmark these runs against analyses performed using the full TOV solver and find that the emulators achieve speed ups of nearly two orders of magnitude, with negligible differences in the recovered posteriors. Additionally, we constrain the slope and curvature of the symmetry energy at the 90% upper credible interval to be $L$ sym ≲ 106 MeV and $K$ sym ≲ 26 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NASA NTRSDate not supplied

The BioMole Facility: Advancement of In Situ Microbiome Analysis for the International Space Station

Characterization of the International Space Station (ISS) microbiome has been enabled by sample return and Earth-based analysis. As human exploration pushes beyond low-Earth orbit, microbial-related crew health, planetary protection, and space research requires in situ capabilities. Steps toward reducing Earth-dependence for complex sample analysis began in 2016 with the amplification of DNA within the miniPCR thermal cycler and DNA sequencing with the MinION sequencer onboard the ISS; for both, samples were prepared on Earth. In 2017, these platforms synergistically enabled the in-situ identification of unknown bacteria collected and cultured from ISS surfaces, thereby shifting the paradigm that microbial cultures had to be returned to Earth. The following year, a culture-independent, swab-to-sequencer method further advanced spaceflight microbiology, demonstrating that culturing could be excluded and provided enhanced insight into the bacterial profile of ISS surfaces. Based on the success of these payloads in confirming the ability to meet crew health identification requirements and the benefits accompanying a culture-independent method, the BioMole Facility was established by the medical operations Crew Health Care Systems team. BioMole is the set of hardware, consumables, and procedures required to support sample preparation and nanopore sequencing onboard the ISS. BioMole goals include expanding sample sources, comparing data to previous methods, demonstrating onboard data analytics, and validating new hardware. To date, comparative surface analysis, molecular- and culture-based, has been completed. Additionally, the demonstration of a sample-to-answer process was achieved when BioMole data was processed onboard using the IBM Open Data and AI Edge software platform installed on the ISS-residing Spaceborne Computer-2. The taxonomic profiles generated from the edge analysis were as expected and paralleled that of the downlinked processed data. Future BioMole efforts involve microbial profiling of the ISS water system, ISS validation of the MinION Mk1C, and an expansion to a research facility available to investigators.

Sarah L. Castro-Wallace↗