Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pulse Power”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Dopant Optimization of Donors in Semiconductor Opening Switches to Eliminate Prepulse

Semiconductor opening switches are solid-state devices capable of delivering nanosecond, hundreds of kilovolts pulses by interrupting kiloamps of current. The interruption of the current occurs in a moderately doped p-region when a high electric field region (HFR) is formed. The HFR occurs because the reverse pumping current cannot be supported by the saturation velocity and majority carrier concentration of the doping level. However, the donor profile also significantly affects the pulse performance. A secondary prepulse occurs if a secondary HFR is formed at the interface of the background n-doping and N+ doping (X n ) . By moving the location of X n deeper into the diode, the effect of the prepulse is reduced. This article investigates the effect of the donor doping profile on the performance metrics of semiconductor opening switches through technology computer-aided design (TCAD) simulations and experimental results. Through a SILVACO TCAD optimization, we designed a P + /p/n - base/n/N + where the intersection of the moderate p-region and intrinsic n-base region (X p ) is at 160 μm and X n is at 220 μm. This profile is fabricated via silicon epitaxy. Experimentally, it is shown that a deep X n (220 μm) compared with a shallow X n (300 μm) reduces the rise time by >5× . In addition, the magnitude of current density during interruption affects the prepulse foot and pulse shape. At lower current densities without the graded donor profile, high peak voltages are not achieved. Comparing the experimental results to the TCAD simulations shows that the model is predictive under high-current densities in the semiconductor opening switch (SOS) regime.

nanosecond pulse power↗
DOE OSTI2024

Forward Modeling of Gamma Reaction History Signatures From Anticipated Deuterium-Tritium Filled MagLIF Implosions on Sandia’s Z-Machine

Nuclear reaction history measurements provide a bang time and burn width of Inertial Confinement Fusion (ICF) implosions and are essential for understanding implosion performance to constrain ICF capsule design. When fusion fuel contains Deuterium (D) and Tritium (T) gas, reaction history is informed by measuring the 16.75 MeV gamma rays generated from the D(T,γ) 5 He reaction. Such DT based reaction history measurements have not been made on the Magnetized Laser Inertial Fusion (MagLIF) platform on Sandia’s Z-Machine due to the lack of Tritium being used. The recent development of ICF implosions with tritiated fuel will open the possibility of measuring the gamma reaction history on the Z-Machine. A forward model of the Gamma Reaction History diagnostic on Z (GRH-Z) has been developed using the MCNP6.3 (Monte-Carlo N-Particle) radiation transport code. The model included the Z-Machine geometry of interest to characterize the impact of neutron induced gamma rays on the DT reaction history measurements. In addition, the impulse response functions of the GRH-Z diagnostic to understand the temporal response of the detector, and the minimum yields required to make a reaction history measurement were calculated. This approach also predicted that with T 2 gas doping of MagLIF implosions a reaction history may be made for high performance shots >8e12-2.4e13 depending on the chosen threshold for the detector, with a maximum signal to background ratio of 25%. It was found that for long duration ICF implosions that additional collimation will be needed to prevent the neutron induced gamma rays from modifying the shape of the measured DT reaction history curve.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Three-dimensional modeling of electric-field enhancement in multilayer dielectric gratings arising from inadvertent flaws

Pulse-compression gratings for high-power, short-pulse laser systems are exposed to high electric fields that are further enhanced locally due to their 2D nanostructured surface. This makes them vulnerable to laser-induced damage. The present work considers the effect on electric-field modulation caused by an array of commonly found inadvertent flaws in gratings including fabrication defects, contamination particles, and laser-induced–damage initiation. These defects affect the laser-damage performance characteristics of the grating. To understand the local field-enhancement distribution due these imperfections, 3D modeling of the electric-field distribution is performed with a sufficiently high resolution of 1/74 of the laser wavelength ( λ ) while considering a volume of ≈489 λ 3 . The results provide estimates for the ensuing electric-field intensification and projected reduction of the laser-damage thresholds, as well as the anticipated pattern of damage growth initiation.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Non-Equilibrium Effects in Quantum Magnets

While most often the state of a material will tend toward an equilibrium determined by its environment, there are many cases of scientific and technological interest where materials are manipulated to be or are found in non-equilibrium configurations. For example, data can be stored in hard drives by deliberately altering the magnetic orientation in a material to store information in non-equilibrium pattern. In this project, the main goals were studies of non-equilibrium properties of quantum magnets using neutron scattering as the primary experimental method. Neutron scattering allows characterization of magnetic correlation lengths sensitive to the presence of defects. It can also be used to distinguish equilibrium from non-equilibrium states via energy transfer rates. Typical bulk state magnetization relaxation times are too short to perform many neutron scattering measurements of interest. To enable the study of non-equilibrium conditions, materials with longer magnetic relaxation times were targeted. CoNb 2 O 6 was used in two experiments related to non-equilibrium physics. In the first, evidence for defects created via the Kibble-Zurek mechanism (KZM) was sought by quenching across a magnetic field-dependent phase transition. Somewhat unexpectedly, clear evidence for KZM-induced defects was absent. Additional measurements of CoNb 2 O 6 were made to better characterize its crystal field and other properties to provide a better theoretical understanding to enable more effective non-equilibrium physics measurements. In another project, LiHo 0.45 Y 0.55 F 4 was used to compare a quantum annealing protocol to a thermal annealing one since magnetic fields can be used to control the thermal fluctuations in LiHo 0.45 Y 0.55 F 4 . In addition, a new pulsed magnet power supply and new techniques were developed suitable for neutron scattering experimental environments to enable faster magnetic field changes for producing non-equilibrium conditions. The power supply developed for this project has wider technological applications in addition to faster magnetic field ramps.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

THz Radiation Generation to Enable Internal Magnetic Field Measurement of Burning Plasmas (Final Scientific Report)

A one-year experimental program was performed using the Multi-TeraWatt (MTW) laser at the Laboratory for Laser Energetics (LLE) to investigate the efficiency and physical process of laser-driven—wire THz generation. This process was evaluated as a potential high-repetition-rate source of powerful THz pulses for use in THz pulsed polarimetry of a moderate-density magnetic-confinement fusion concept developed by TAE. The goal was to develop a source for short pulses in the THz regime (150 μm wavelength) containing 10’s of mJ. The campaign tested the impact of Cu wire diameter (25, 75, 160 μm), length (250 – 750 μm), and laser irradiation orientation on THz production efficiency in comparison to 20-μm thick Cu foils. Of these targets, the 160 µm diameter, 750 µm long wires with sharpened tips and irradiated at the base were found to produce the highest energy and shortest wavelength THz pulses, exceeding 2.5 Joule/sr and meeting the requirements for the polarimetry diagnostic. The brightest THz signal was radiated in the direction of the sharpened wire tip. A combination of two models – a traveling wave antenna combined with coherent transition radiation – describes the emission pattern, pulse energy, and spectrum observed in the experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Integrated Test Stand

Explore the source record for details and available documents.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Los Alamos Portable Pulser (LAPP) Marx Bank and Digitizer System Characterization

Over the duration of June 22 nd to July 15 th , I interned at Los Alamos National Laboratory within ISR-2 on the Los Alamos Portable Pulser (LAPP) Program. This program concerns a radar dish used for characterizing signal propagation through earth’s ionosphere. The bulk of my internship consisted of characterizing the delay of a Marx Bank Generator and writing hardware-interface C/C++ code for the pulse-recording Digitizer System.

47 OTHER INSTRUMENTATION↗
NASA NTRS1972

Electrothermal hydrazine thruster development.

Results of testing of several electrically-heated, thermal-decomposition hydrazine thrustors in the 5- to 70-mlb thrust range. Propellant supply pressures are compatible with those typical of larger catalytic thrustors. With a 5-W power input, pulsed specific impulse varies from about 165 to 215 sec, depending on duty cycle. The thrustors yield highly reproducible 1-mlb-sec impulse bits with 50-msec command pulse widths. The steady-state specific impulse exceeds 230 sec for thrust levels above 10 mlb.

Murch, C. K.↗
NASA NTRS1974

Wavelength-selective, sequential Q-switching laser cavity

Single-frequency continuous output of laser is converted into series of high-power laser pulses at high repetition rates. Applications include pollutant detection by absorption, laser gain measurements at discrete wavelengths, laser propagation measurement, and laser plasma diagnostics.

Allario, F.↗
NASA NTRS1974

Stimulation of the Harris instability in the ionosphere

Observations made with a sweep frequency rf sounder on the satellite ISIS 1 in the topside ionosphere are reported, and the interpretation of diffuse signals at the lower harmonics of the electron cyclotron frequency is discussed. These signals are attributed to the stimulation of Harris instabilities of longitudinal plasma waves at multiples of the cyclotron frequency in a single electron distribution. The Harris instability is excited most readily when the frequency is near the midpoint between the harmonics of the cyclotron frequency. The cause of these instabilities is the large electron velocity anisotropy which results from collisionless cyclotron damping of the energy from the high power sounder pulse.

Benson, R. F.↗
NASA NTRS1975

Earth resources shuttle imaging radar

A report is presented on a preliminary design of a Synthetic Array Radar (SAR) intended for experimental use with the space shuttle program. The radar is called Earth Resources Shuttle Imaging Radar (ERSIR). Its primary purpose is to determine the usefulness of SAR in monitoring and managing earth resources. The design of the ERSIR, along with tradeoffs made during its evolution is discussed. The ERSIR consists of a flight sensor for collecting the raw radar data and a ground sensor used both for reducing these radar data to images and for extracting earth resources information from the data. The flight sensor consists of two high powered coherent, pulse radars, one that operates at L and the other at X-band. Radar data, recorded on tape can be either transmitted via a digital data link to a ground terminal or the tape can be delivered to the ground station after the shuttle lands. A description of data processing equipment and display devices is given.

Source record↗
NASA NTRS1979

Laser Techniques in Photovoltaic Research

High-power laser pulses were used to replace the conventional high temperature furnace processing for the p-n junction formation step in high speed, low cost solar cell fabrication. Three different approaches to junction formation were tested: (1) laser annealing of ion-implanted Si in which laser radiation is used to remove the radiation damage and to recover the electrical activity in the implanted layer; (2) a process in which a thin film of dopant is first deposited on the substrate and then incorporated into the near-surface region by laser-induced diffusion; and (3) a process in which a heavily doped amorphous silicon layer is deposited on the Si substrate and epitaxially regrown from the melted substrate layer by laser radiation. All three methods were found to provide suitable candidates for high efficiency Si solar cells.

Young, R. T.↗
NASA NTRS1978

Effect of ultrasonic irradiation on mammalian cells and chromosomes in vitro

Human peripheral blood and HeLa cells were irradiated in vitro at the ultrasonic frequency of 65 kHz. The whole blood and HeLa cell suspensions were exposed to continuous and pulsed ultrasonic power levels of 0.12, 0.16, 0.72, 1.12 and 2.24 W for a period of one minute. The method of ultrasonic irradiation was carried out with the whole blood or HeLa cell suspensions coupled directly to a cylindrical transducer while heating of the cell suspensions in excess of 41 C was avoided. Irradiated and unirradiated peripheral blood lymphocyte chromosome cultures were prepared and scored for selected numerical and morphological aberrations. There was no significant difference in the frequency of chromosomal aberrations between irradiated and unirradiated cells.

Roseboro, J. A.↗
NASA NTRS1983

Spontaneous Raman scattering as a high resolution XUV radiation source

A type of high resolution XUV radiation source is described which is based upon spontaneous anti-Stokes scattering of tunable incident laser radiation from atoms excited to metastable levels. The theory of the source is summarized and two sets of experiments using He (1s2s)(1)S atoms, produced in a cw hollow cathode and in a pulsed high power microwave discharge, are discussed. The radiation source is used to examine transitions originating from the 3p(6) shell of potassium. The observed features include four previously unreported absorption lines and several sharp interferences of closely spaced autoionizing lines. A source linewidth of about 1.9 cm(-1) at 185,000 cm(-1) is demonstrated.

Rothenberg, J. E.↗