Search NASA⌕ Search

SEARCH · Search NASA

Results for “RADAR method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Vertical velocity structure and geometry of clear air convective elements

The paper discusses observations of individual convective elements with a high-power narrow-beam scanning radar, an FM-CW radar, and an acoustic sounder, including the determination of the vertical air velocity patterns of convective structures with the FM-CW radar and acoustic sounder. Data are presented which link the observed velocity structure and geometrical patterns to previously proposed models of boundary layer convection. It is shown that the high-power radar provides a clear three-dimensional picture of convective cells and fields over a large area with a resolution of 150 m, where the convective cells are roughly spherical. Analysis of time-height records of the FM-CW radar and acoustic sounder confirms the downdraft-entrainment mechanism of the convective cell. The Doppler return of the acoustic sounder and the insect-trail slopes on FM-CW radar records are independent but redundant methods for obtaining the vertical velocity patterns of convective structures.

Rowland, J. R.↗
NASA NTRS1979

Quantitative Analysis of Radar Returns from Insects

When a number of flying insects is low enough to permit their resolution as individual radar targets, quantitative estimates of their aerial density are developed. Accurate measurements of heading distribution using a rotating polarization radar to enhance the wingbeat frequency method of identification are presented.

Riley, J. R.↗
NASA NTRS1978

Precise terrestrial time: A means for improved ballistic missile guidance analysis

An approach developed to improve the ground instrumentation time tagging accuracy and adapted to support the Minuteman ICBM program is desired. The Timing Insertion Unit (TIU) technique produces a telemetry data time tagging resolution of one tenth of a microsecond, with a relative intersite accuracy after corrections and velocity data (range, azimuth, elevation and range rate) also used in missile guidance system analysis can be correlated to within ten microseconds of the telemetry guidance data. This requires precise timing synchronization between the metric and telemetry instrumentation sites. The timing synchronization can be achieved by using the radar automatic phasing system time correlation methods. Other time correlation techniques such as Television (TV) Line-10 and the Geostationary Operational Environmental Satellites (GEOS) terrestial timing receivers are also considered.

Ehrsam, E. E.↗
NASA NTRS1983

Sea ice motion measurements from Seasat SAR images

Data from the Seasat synthetic aperture radar (SAR) experiment are analyzed in order to determine the accuracy of this information for mapping the distribution of sea ice and its motion. Data from observations of sea ice in the Beaufort Sea from seven sequential orbits of the satellite were selected to study the capabilities and limitations of spaceborne radar application to sea-ice mapping. Results show that there is no difficulty in identifying homologue ice features on sequential radar images and the accuracy is entirely controlled by the accuracy of the orbit data and the geometric calibration of the sensor. Conventional radargrammetric methods are found to serve well for satellite radar ice mapping, while ground control points can be used to calibrate the ice location and motion measurements in the cases where orbit data and sensor calibration are lacking. The ice motion was determined to be approximately 6.4 + or - 0.5 km/day. In addition, the accuracy of pixel location was found over land areas. The use of one control point in 10,000 sq km produced an accuracy of about + or 150 m, while with a higher density of control points (7 in 1000 sq km) the location accuracy improves to the image resolution of + or - 25 m. This is found to be applicable for both optical and digital data.

Leberl, F.↗
NASA NTRS1991

System and method for measuring ocean surface currents at locations remote from land masses using synthetic aperture radar

A system for measuring ocean surface currents from an airborne platform is disclosed. A radar system having two spaced antennas wherein one antenna is driven and return signals from the ocean surface are detected by both antennas is employed to get raw ocean current data which are saved for later processing. There are a pair of global positioning system (GPS) systems including a first antenna carried by the platform at a first location and a second antenna carried by the platform at a second location displaced from the first antenna for determining the position of the antennas from signals from orbiting GPS navigational satellites. Data are also saved for later processing. The saved data are subsequently processed by a ground-based computer system to determine the position, orientation, and velocity of the platform as well as to derive measurements of currents on the ocean surface.

Young, Lawrence E.↗
NASA NTRS1992

Greenland observed at high resolution by the Seasat scatterometer

A previously developed method for the reconstruction of surface radar backscatter characteristics is applied to Seasat scatterometer (SASS) data for the study of Greenland's ice sheet. A time series of the radar backscatter images provides an island-wide view of the ice sheet which shows the extent of the summer melt. Medium-scale scatterometer images provide frequent island-wide observations permitting precise measurements of the seasonal extent of the summer melt.

Long, D. G.↗
NASA NTRS1994

Analysis of cylindrical wrap-around and doubly conformal patch antennas by way of the finite element-artificial absorber method

The goal of this project was to develop analysis codes for computing the scattering and radiation of antennas on cylindrically and doubly conformal platforms. The finite element-boundary integral (FE-BI) method has been shown to accurately model the scattering and radiation of cavity-backed patch antennas. Unfortunately extension of this rigorous technique to coated or doubly curved platforms is cumbersome and inefficient. An alternative approximate approach is to employ an absorbing boundary condition (ABC) for terminating the finite element mesh thus avoiding use of a Green's function. A FE-ABC method is used to calculate the radar cross section (RCS) and radiation pattern of a cavity-backed patch antenna which is recessed within a metallic surface. It is shown that this approach is accurate for RCS and antenna pattern calculations with an ABC surface displaced as little as 0.3 lambda from the cavity aperture. These patch antennas may have a dielectric overlay which may also be modeled with this technique.

Volakis, J. L.↗
NASA NTRS2005

Preliminary results from an airborne experiment using along-track interferometry for ground moving target indication

Synthetic aperture radar (SAR) along track interferometry (ATI) has been used extensively to measure ocean surface currents. Given its ability to measure small velocities of relatively radar-dark water surfaces, there is great potential that this technique can be adapted for ground moving target indication (GMTI) applications, particularly as a method for detecting very slwo targets with small radar cross sections. In this paper we describe preliminary results from an ATI GMTI experiment.

ground moving target indication↗
NASA NTRS2010

Characterization of Cloud Water-Content Distribution

The development of realistic cloud parameterizations for climate models requires accurate characterizations of subgrid distributions of thermodynamic variables. To this end, a software tool was developed to characterize cloud water-content distributions in climate-model sub-grid scales. This software characterizes distributions of cloud water content with respect to cloud phase, cloud type, precipitation occurrence, and geo-location using CloudSat radar measurements. It uses a statistical method called maximum likelihood estimation to estimate the probability density function of the cloud water content.

Lee, Seungwon↗
NASA NTRS2011

Tropospheric Correction for InSAR Using Interpolated ECMWF Data and GPS Zenith Total Delay

To mitigate atmospheric errors caused by the troposphere, which is a limiting error source for spaceborne interferometric synthetic aperture radar (InSAR) imaging, a tropospheric correction method has been developed using data from the European Centre for Medium- Range Weather Forecasts (ECMWF) and the Global Positioning System (GPS). The ECMWF data was interpolated using a Stretched Boundary Layer Model (SBLM), and ground-based GPS estimates of the tropospheric delay from the Southern California Integrated GPS Network were interpolated using modified Gaussian and inverse distance weighted interpolations. The resulting Zenith Total Delay (ZTD) correction maps have been evaluated, both separately and using a combination of the two data sets, for three short-interval InSAR pairs from Envisat during 2006 on an area stretching from northeast from the Los Angeles basin towards Death Valley. Results show that the root mean square (rms) in the InSAR images was greatly reduced, meaning a significant reduction in the atmospheric noise of up to 32 percent. However, for some of the images, the rms increased and large errors remained after applying the tropospheric correction. The residuals showed a constant gradient over the area, suggesting that a remaining orbit error from Envisat was present. The orbit reprocessing in ROI_pac and the plane fitting both require that the only remaining error in the InSAR image be the orbit error. If this is not fulfilled, the correction can be made anyway, but it will be done using all remaining errors assuming them to be orbit errors. By correcting for tropospheric noise, the biggest error source is removed, and the orbit error becomes apparent and can be corrected for

Webb, Frank H.↗
DOE OSTI2019

Savannah River Site H-Canyon Tunnel Inspection Lidar Mapping Solution - 19477

Over the summer of 2018, the Savannah River National Laboratory (SRNL) formed and hosted a robotics and sensor intern team and tasked them with developing a proof of concept for a modular sensor suite to be deployed in the next H-Canyon Air Exhaust (HCAEX) Tunnel inspection in spring 2019. The developed sensor suite includes a planar Lidar sensor for depth imaging, two Panospheric 4K cameras, and an inertial measurement unit to aid in base localization. The Lidar is actuated to rotate about the vertical axis, which allows for the team to gather 3D mapping data. These rotating planar scans can also be fused with the camera and IMU data to generate colorized internal maps of the tunnel. The supporting software was developed iteratively over the summer and leveraged prior research conducted at the University of Texas at Austin, which facilitated the stitching of Lidar scans, the fusion of the sensor data, and even algorithms to provide in-situ navigation feedback to the operators of the crawler. This software simultaneously represents huge leaps forward in the mapping and degradation measurement abilities of the crawler over past inspection units, while also allowing the operator much greater situational awareness. The improvement in awareness reduces risks of the robot becoming stuck or disabled inside the tunnel, which would jeopardize the success of both this and future inspections. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1984

Accuracy of velocity and power determination by the Doppler method

When designing a Mesosphere-Stratosphere-Troposphere (MST) radar antenna one has to trade between the choices to optimize the effective aperture or to optimize the sidelobe suppression. An optimization of the aperture increases the sensitivity. Suppression of side-lobes by tapering attenuates undesirable signals which spoil the estimates of reflectivity and velocity. Generally, any sidelobe effects are equivalent to a broadening of the antenna beam. The return signal is due to a product of the antenna pattern with the varying atmospheric reflectivity structures. Thus, knowing the antenna pattern, it is in principle possible to find the signal spectra, which, however, may be a tedious computational and ambiguous procedure. For vertically pointing main beams the sidelobe effects are efficiently suppressed because of the aspect sensitivity. It follows that sidelobes are a minor problem for spaced antenna methods. However, they can be crucial for Doppler methods, which need off-vertical beams. If a sidelobe is pointing towards the zenith a larger power may be received from the vertical than off-vertical directions, but quantitative estimates of this effect are not yet known. To get an error estimate of sidelobe effects with an off-vertical main beam a 1-dimensional example is considered.

Rottger, J.↗
NASA NTRS2022

Progress in Time-Series Soil Moisture Retrieval Using L- and S-Band Radar Backscatter

L- and S-band observations from NASA's Passive/Active L/S band (PALS) sensor from the SMEX02 campaign were used to estimate soil moisture. The retrieval process is based on the “alpha approximation” method. This method utilizes a time-series of normalized radar backscatter measurements as well as ancillary information to estimate soil moisture over the Walnut Creek watershed. The resulting retrieved soil moistures are compared to in-situ soil moisture measurements at multiple test sites within the watershed. The calculations show reasonable results for both L- and S-band and provide further insight into the use of L- and S-bands for the upcoming NASA/ISRO mission.

Soil moisture↗
DOE OSTI2016

Estimation of Cloud Fraction Profile in Shallow Convection Using a Scanning Cloud Radar

Large spatial heterogeneities in shallow convection result in uncertainties in estimations of domain-averaged cloud fraction profiles (CFP). This issue is addressed using large eddy simulations of shallow convection over land coupled with a radar simulator. Results indicate that zenith profiling observations are inadequate to provide reliable CFP estimates. Use of Scanning Cloud Radar (SCR), performing a sequence of cross-wind horizon-to-horizon scans, is not straightforward due to the strong dependence of radar sensitivity to target distance. An objective method for estimating domain-averaged CFP is proposed that uses observed statistics of SCR hydrometeor detection with height to estimate optimum sampling regions. This method shows good agreement with the model CFP. Results indicate that CFP estimates require more than 35 min of SCR scans to converge on the model domain average. Lastly, the proposed technique is expected to improve our ability to compare model output with cloud radar observations in shallow cumulus cloud conditions.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1976

Side-looking radar mosaicking experiment

A block of 24 overlapping synthetic aperture side-looking radar images flown over a well mapped area of about 90,000 sq km provided an opportunity to evaluate the mapping accuracy achieved in current radar mosaicking projects. The maps of scale 1:24,000 that are available in the imaged area permitted the study of the geometric errors of the radar mosaics and of individual radar strips. An estimate was obtained for the effect of the distribution and density of ground control points and for the accuracy of different mosaicking methods that are currently employed with synthetic aperture radar images. It is shown that a successful radar mosaicking process requires the elimination of image errors of up to several kilometers. These errors are introduced as a result of the limited precision of the inertial aircraft navigation. An example of a radar mapping effort in which the navigation errors could be eliminated is presented. The resulting radar mosaics have residual RMS mapping errors of planimetry of about plus or minus 150 m.

Leberl, F.↗
NASA NTRS2011

Experiment in Onboard Synthetic Aperture Radar Data Processing

Single event upsets (SEUs) are a threat to any computing system running on hardware that has not been physically radiation hardened. In addition to mandating the use of performance-limited, hardened heritage equipment, prior techniques for dealing with the SEU problem often involved hardware-based error detection and correction (EDAC). With limited computing resources, software- based EDAC, or any more elaborate recovery methods, were often not feasible. Synthetic aperture radars (SARs), when operated in the space environment, are interesting due to their relevance to NASAs objectives, but problematic in the sense of producing prodigious amounts of raw data. Prior implementations of the SAR data processing algorithm have been too slow, too computationally intensive, and require too much application memory for onboard execution to be a realistic option when using the type of heritage processing technology described above. This standard C-language implementation of SAR data processing is distributed over many cores of a Tilera Multicore Processor, and employs novel Radiation Hardening by Software (RHBS) techniques designed to protect the component processes (one per core) and their shared application memory from the sort of SEUs expected in the space environment. The source code includes calls to Tilera APIs, and a specialized Tilera compiler is required to produce a Tilera executable. The compiled application reads input data describing the position and orientation of a radar platform, as well as its radar-burst data, over time and writes out processed data in a form that is useful for analysis of the radar observations.

Holland, Matthew↗