SEARCH · Search NASA

Results for “ROD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Slab-geometry Nd:glass laser performance studies

It is noted that slab-geometry solid-state lasers potentially provide significant performance improvements relative to conventional rod-geometry lasers. Experimental measurements that use an Nd:glass test-bed slab laser are presented. A comparison is made between the results and computer-model predictions of the slab-geometry approach. The computer model calculates and displays the temperature and stress fields in the slab, and on the basis of these predicts birefringence and index-of-refraction distributions. The effect that these distributions have on optical propagation is determined in a polarization-sensitive ray-tracing section of the model. Calculations are also made of stress-induced surface curvature and the resulting focusing effects. The measurements are found to be in good agreement with the computer-model predictions. It is concluded that the slab configuration offers significant laser-performance advantages in comparison with the traditional rod-laser geometry.

Eggleston, J. M.↗

NASA NTRS1983

Transporter for Treated Sheet Materials

Plastic spacers keep parts separated during transport or storage. Cart with rods and spacers holds sheets with delicate finishes for storage or transport. Sheets supported vertically by rods, or horizontally. Spacers keep sheets separated. Designed to eliminate time and expense of tapping, wrapping, and sometimes refinishing aluminum sheets with delicate anodized finished.

Pollack, M., H.↗

NASA NTRS1983

Thermal Modeling of Bridgman Crystal Growth

Heat Flow modeled for moving or stationary rod shaped sample inside directional-solidification furnace. Program effectively models one-dimensional heat flow in translating or motionless rod-shaped sample inside of directionalsolidification furnace in which adiabatic zone separates hot zone and cold zone. Applicable to systems for which Biot numbers in hot and cold zones are less than unity.

Cothran, E.↗

NASA NTRS1984

Interstitial Collimating Holes for Gas-Levitation Microfurnace

Spaces between small rods direct gas flow. Wires for thin rods clamped in square array in precise square gooove. Spaces between wires are long, thin, parallel channels that direct flow of gas. Technique extended to such hard-to-machine refractory metals as tungsten and molybdenum.

Dunn, E. G.↗

NASA NTRS1982

Vortices in turbulence

Theoretical and experimental results of studies to determine the flow parameters and structures of plane mixing layers are reported. Smoke visualization, combined with hot-wire anemometry, sheets of laser light, and photography were used to gather data from the wall flow. The behavior of vortex rods was examined, noting that the rods persisted only if new vortex energy was supplied from the sublayer. A power spectral density was defined for the velocity fluctuations, as was a hierarchy of velocity scales for geometrically similar vortices. The length scale grows linearly with downstream distance, where the flow structures are fed by longitudinal vortices. A model is developed for vortex pairing in sequential order from the bottom of the mixing layer outward in a repetitive process involving vortex stretching. The model is actually a migration strategy that satisfies the flow self-preservation constraints.

Perry, A. E.↗

NASA NTRS1983

Wrinkling phenomenon in structures. I - Model formulations

Those structural element models which can suffer the wrinkling phenomenon are analyzed. A laminated elastic material, defined as a one-parametrical family of surfaces whose in-plane strains are negligible in comparison to the strains in the transverse direction, is analyzed in terms of its geometry, geometrical compatibility equations, layer geometry, kinematics, kinematical compatibility equations, and governing dynamical equations. These aspects are also examined for the case of a soft shell, defined as a shell for which the in-plane strains of the middle surface are negligible compared to the strains in the transverse direction, and for the case of a soft rod, defined as a rod for which the strains along the axis are negligible compared to the strains in the transverse direction. The influence of internal fluid flow on the wrinkling phenomenon for layers of laminated material and for a flexible pipe containing an inviscid and incompressible fluid is also analyzed.

Zak, M.↗

NASA NTRS1984

Tubing and cable cutting tool

A hand held hydraulic cutting tool was developed which is particularly useful in deactivating ejection seats in military aircraft rescue operations. The tool consists primarily of a hydraulic system composed of a fluid reservoir, a pumping piston, and an actuator piston. Mechanical cutting jaws are attached to the actuator piston rod. The hydraulic system is controlled by a pump handle. As the pump handle is operated the actuator piston rod is forced outward and thus the cutting jaws are forced together. The frame of the device is a flexible metal tubing which permits easy positioning of the tool cutting jaws in remote and normally inaccessible locations. Bifurcated cutting edges ensure removal of a section of the tubing or cable to thereby reduce the possibility of accidental reactivation of the tubing or cable being severed.

Mcsmith, D. D.↗

NASA NTRS1984

Stirling Module Development Overview

The solar parabolic dish Stirling engine electrically generating module consists of a solar collector coupled to a Stirling engine powered electrical generator. The module is designed to convert solar power to electrical power in parallel with numerous identical units coupled to an electrical utility power grid. The power conversion assembly generates up to 25 kilowatts at 480 volts potential/3 phase/alternating current. Piston rings and seals with gas leakage have not occurred, however, operator failures resulted in two burnt out receivers, while material fatigue resulted in a broken piston rod between the piston rod seal and cap seal.

Livingston, F. R.↗

NASA NTRS1984

A review of chevron-notched fracture specimens

The historical development of chevron notched fracture specimens is reviewed. Stress intensity factors and load line displacement solutions proposed for some of these specimens are compared. The original bend bar configurations up to the present day short rod and bar specimens are reviewed. The results of an analytical round robin that was conducted on chevron-notched specimens are presented. In the round robin, stress-intensity factors for either the chevron notched round rod or square bar specimens were calculated. The consensus stress intensity factor (compliance) solution for these specimens is assessed. The stress intensity factor solutions proposed for three and four point bend chevron notched specimens are reviewed.

Newman, J. C., Jr.↗

NASA NTRS1983

Assessment of two neglected effects in the analysis of an oil pumping ring seal

Many factors have been found to affect the performance of a pumping ring seal. In this paper, two effects (elevated reservoir temperature and rod deformation), both heretofore neglected, are assessed through the use of a thermoelastohydrodynamic numerical model of the pumping ring. Elevated reservoir temperatures are found to result in an increase in the amount of lubricant pumped while deformation of the translating rod is shown to cause a reduction in the lubricant pumped.

Keith, T. G.↗

NASA NTRS1984

SPAR X Technical Report for Experiment 76-22 Directional Solidification of Magnetic Composites

The effects of gravity on Bridgman-Stockbarger directional solidification of off-eutectic Bi/MnBi were studied in reduced gravity aboard the SPAR X flight and compared to normal-gravity investigations and previous eutectic Bi/MnBi SPAR flight experiments. The directional solidification of off-eutectic Bi/MnBi results in either a dendritic structure connected with local cooperative growth or a coupled low volume fraction faceted/non faceted aligned rod eutectic whose Mn macrosegregation, MnBi rod size, interrod spacing, and thermal and magnetic properties are sensitive functions of the solidification processing conditions. Two hypoeutectic and two hypereutectic samples were solidified during 605 sec of furnace travel, with an initial 265 sec low-gravity interval. Comparison Earth-gravity samples were solidified in the same furance assembly under identical processing conditions. Macrosegregation in the low-g samples was consistent with a metastable increase in Mn solubility in the Bi matrix, in partial agreement with previous Bi/MnBi SPAR findings of MnBi volume reduction.

Bethin, J.↗

NASA NTRS1985

Microgravity silicon zoning investigation

The flow instabilities in floating zones of silicon were investigated and methods for investigation of these instabilities in microgravity were defined. Three principal tasks were involved: (1) characterization of the float zone in small diameter rods; (2) investigation of melt flow instabilities in circular melts in silicon disks; and (3) the development of a prototype of an apparatus that could be used in near term space experiments to investigate flow instabilities in a molten zone. It is shown that in a resistance heated zoner with 4 to 7 mm diameter silicon rods that the critical Marangoni number is about 1480 compared to a predicted value of 14 indicative that viable space experiments might be performed. The prototype float zone apparatus is built and specifications are prepared for a flight zoner should a decision be reached to proceed with a space flight experimental investigation.

Kern, E. L.↗

NASA NTRS1985

Variable length strut with longitudinal compliance and locking capability

A variable length strut device is illustrated for connecting two associated structures which includes an outer load bearing shell, a drive assembly, a length varying compliance assembly positioned by drive assembly, and a strut rod locking assembly. The load bearing shell includes a connecting part adapted for connection to a first associated structure. A strut connection rod has a connecting part adapted for connection to a second associated structure and a distal end having a piston driver slidably carried in a housing of compliance assembly. Two compliance pistons act in opposing directions on the piston driver to provide longitudinal compliance in a compliance mode of operation. Locking assembly includes locking balls which are urged in a locking ring as locking bolt is urged to the left by fluid pressure. Microswitches sense the displacement of pistons away from the internal ring to bring the pistons to a neutral position wherein the pistons are in contact with the internal ring when it is desired to do so as affected by a control source.

Belew, R. R.↗

NASA NTRS1984

Effect of applied magnetic fields during directional solidification of eutectic Bi-Mn

Samples of rod eutectics Bi/MnBi were directionally solidified in a growth-up Bridgman-Stockbarger configuration in the presence of a transverse magnetic field up to 3 kg to determine whether gravity-driven convective effects could be reduced or eliminated. The experiments were carried out over a range of furnace velocities, V, of 0.2 to 50 cm per hour with a thermal gradient at the liquid-solid interface of 100 C/cm and 150 C/cm. Morphological, thermal and magnetic analyses were carried out on samples grown with and without an applied magnetic field. For samples grown at V greater than 3 cm per hour in a transverse magnetic field, reduced mean rod diameter and interrod spacing occurred as well as undercooling and increased coercive strength. The data agreed with that obtained for low-g growth at 50 cm per hour and 30 cm per hour.

Decarlo, J. L.↗

NASA NTRS1986

Storing Chemicals in Packed Spheres

Reactants released by crushing or puncturing. Agglomerated gas-filled spheres hexagonally close packed and sintered or glued together into rods strung together at ends. Rods fed into crushing machine to release material in spheres as needed.

Wang, T. G.↗

NASA NTRS1986

Thermal-capillary analysis of small-scale floating zones Steady-state calculations

Galerkin finite element analysis of a thermal-capillary model of the floating zone crystal growth process is used to predict the dependence of molten zone shape on operating conditions for the growth of small silicon boules. The model accounts for conduction-dominated heat transport in the melt, feed rod and growing crystal and for radiation between these phases, the ambient and a heater. Surface tension acting on the shape of the melt/gas meniscus counteracts gravity to set the shape of the molten zone. The maximum diameter of the growing crystal is set by the dewetting of the melt from the feed rod when the crystal radius is large. Calculations with small Bond number show the increased zone lengths possible for growth in a microgravity environment. The sensitivity of the method to the shape and intensity of the applied heating distribution is demonstrated. The calculations are compared with experimental observations.

Duranceau, J. L.↗

NASA NTRS1987

Fatigue testing a plurality of test specimens and method

Described is a fatigue testing apparatus for simultaneously subjecting a plurality of material test specimens to cyclical tension loading to determine the fatigue strength of the material. The fatigue testing apparatus includes a pulling head having cylinders defined therein which carry reciprocating pistons. The reciprocation of the pistons is determined by cyclical supplies of pressurized fluid to the cylinders. Piston rods extend from the pistons through the pulling head and are attachable to one end of the test specimens, the other end of the test specimens being attachable to a fixed base, causing test specimens attached between the piston rods and the base to be subjected to cyclical tension loading. Because all the cylinders share a common pressurized fluid supply, the breaking of a test specimen does not substantially affect the pressure of the fluid supplied to the other cylinders nor the tension applied to the other test specimens.

Hodo, James D.↗

NASA NTRS1986

Fault structures in rapidly quenched Ni-Mo binary alloys

Fault structures in two Ni-Mo alloy ribbons (Ni-28 at. pct Mo and Ni-35 at. pct Mo) cast by a free jet chill block melt spinning process were studied. Thin foils for TEM studies were made by electrochemical thinning using an alcohol/butyl cellosolve/perchloric acid mixture in a twin jet electropolishing device. The samples displayed typical grains containing linear faulted regions on the wheelside of the two alloy ribbons. However, an anomalous diffraction behavior was observed upon continuous tilting of the sample: the network of diffraction spots from a single grain appeared to expand or contract and rotate. This anomalous diffraction behavior was explained by assuming extended spike formation at reciprocal lattice points, resulting in a network of continuous rel rods. The validity of the model was confirmed by observations of a cross section of the reciprocal lattice parallel to the rel rods.

Jayaraman, N.↗