Search NASA⌕ Search

SEARCH · Search NASA

Results for “Random dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Gravitational Effects on Closed-Cellular-Foam Microstructure

Polyurethane foam has been produced in low gravity for the first time. The cause and distribution of different void or pore sizes are elucidated from direct comparison of unit-gravity and low-gravity samples. Low gravity is found to increase the pore roundness by 17% and reduce the void size by 50%. The standard deviation for pores becomes narrower (a more homogeneous foam is produced) in low gravity. Both a Gaussian and a Weibull model fail to describe the statistical distribution of void areas, and hence the governing dynamics do not combine small voids in either a uniform or a dependent fashion to make larger voids. Instead, the void areas follow an exponential law, which effectively randomizes the production of void sizes in a nondependent fashion consistent more with single nucleation than with multiple or combining events.

Noever, David A.↗
NASA NTRS2011

The EVE Doppler Sensitivity and Flare Observations

The Extreme-ultraviolet Variability Experiment (EVE) obtains continuous EUV spectra of the Sun viewed as a star. Its primary objective is the characterization of solar spectral irradiance, but its sensitivity and stability make it extremely interesting for observations of variability on time scales down to the limit imposed by its basic 10 s sample interval. In this paper we characterize the Doppler sensitivity of the EVE data. We find that the 30.4 nm line of He II has a random Doppler error below 0.001 nm (1 pm, better than 10 km/s as a redshift), with ample stability to detect the orbital motion of its satellite, the Solar Dynamics Observatory (SDO). Solar flares also displace the spectrum, both because of Doppler shifts and because of EVE's optical layout, which (as with a slitless spectrograph) confuses position and wavelength. As a flare develops, the centroid of the line displays variations that reflect Doppler shifts and therefore flare dynamics. For the impulsive phase of the flare SOL2010-06-12, we find the line centroid to have a redshift of 16.8 +/- 5.9 km/s relative to that of the flare gradual phase (statistical errors only). We find also that high-temperature lines, such as Fe XXIV 19.2 nm, have well-determined Doppler components for major flares, with decreasing apparent blueshifts as expected from chromospheric evaporation flows.

Hudson, H. S.↗
NASA NTRSDate not supplied

Characterization of OCO-2 and ACOS-GOSAT biases and errors for flux estimates

We characterize the magnitude of seasonally and spatially varying biases in the National Aeronautics and Space Administration (NASA) Orbiting Carbon Observatory-2 (OCO-2) Version 8 (v8) and the Atmospheric CO2 Observations from Space (ACOS) Greenhouse Gas Observing SATellite (GOSAT) version 7.3 (v7.3) satellite CO2 retrievals by comparisons to measurements collected by the Total Carbon Column Observing Network (TCCON), Atmospheric Tomography (ATom) experiment, and National Oceanic and Atmospheric Administration (NOAA) Earth System Research Laboratory (ESRL) and U. S. Department of Energy (DOE) aircraft, and surface stations. Although the ACOS-GOSAT estimates of the column averaged carbon dioxide (CO2) dry air mole fraction (XCO2) have larger random errors than the OCO-2 XCO2 estimates, and the space-based estimates over land have larger random errors than those over ocean, the systematic errors are similar across both satellites and surface types, 0.6 ± 0.1 ppm. We find similar estimates of systematic error whether dynamic versus geometric coincidences or ESRL/DOE aircraft versus TCCON are used for validation (over land), once validation and co-location errors are accounted for. We also find that areas with sparse throughput of good quality data (due to quality flags and preprocessor selection) over land have ~double the error of regions of high-throughput of good quality data. We characterize both raw and bias-corrected results, finding that bias correction improves systematic errors by a factor of 2 for land observations and improves errors by ~0.2 ppm for ocean. We validate the lowermost tropospheric (LMT) product for OCO-2 and ACOS-GOSAT by comparison to aircraft and surface sites, finding systematic errors of ~1.1 ppm, while having 2-3 times the variability of XCO2. We characterize the time and distance scales of correlations for OCO-2 XCO2 errors, and find error correlations on scales of 0.3 degrees, 5-10 degrees, and 60 days. We find comparable scale lengths for the bias correction term. Assimilation of the OCO-2 bias correction term is used to estimate flux errors resulting from OCO-2 seasonal biases, finding annual flux errors on the order of 0.3 and 0.4 PgC/yr for Transcom-3 ocean and land regions, respectively.

Susan S Kulawik↗
NASA NTRS2011

Monte Carlo Simulations of the Formation Flying Dynamics for the Magnetospheric Multiscale (MMS) Mission

The MMS mission is an ambitious space physics mission that will fly 4 spacecraft in a tetrahedron formation in a series of highly elliptical orbits in order to study magnetic reconnection in the Earth's magnetosphere. The mission design is comprised of a combination of deterministic orbit adjust and random maintenance maneuvers distributed over the 2.5 year mission life. Formal verification of the requirements is achieved by analysis through the use of the End-to-End (ETE) code, which is a modular simulation of the maneuver operations over the entire mission duration. Error models for navigation accuracy (knowledge) and maneuver execution (control) are incorporated to realistically simulate the possible maneuver scenarios that might be realized These error models, coupled with the complex formation flying physics, lead to non-trivial effects that must be taken into account by the ETE automation. Using the ETE code, the MMS Flight Dynamics team was able to demonstrate that the current mission design satisfies the mission requirements.

Schiff, Conrad↗
NASA NTRS2022

Yellowstone Ecological Forecasting: Assessing Change in Aspen Extent in Northern Yellowstone National Park

The removal and reintroduction of the gray wolf (Canis lupus) in Yellowstone National Park have shaped the ecological composition of this distinct landscape, representing a textbook example of trophic dynamics. With particular importance to conservation science, researchers have studied the trophic cascades between wolves and species such as elk (Cervus canadensis) and quaking aspen (Populus tremuloides). In conjunction with the National Park Service, Yellowstone National Park, Utah State University, and the University of Wisconsin–Stevens Point, this project utilized satellite remote sensing to investigate the long-term trends in aspen extent. Through random forest modeling and phenological approaches, Landsat 5 Thematic Mapper (TM; years 1986–2011) and Sentinel-2 Multispectral Instrument (MSI; years 2017–2019) datasets were used to derive color composites, Normalized Difference Vegetation Index (NDVI), Enhanced Vegetation Index (EVI), and Tasseled Cap Indices (Brightness, Greenness, Wetness). The International Space System (ISS) Global Ecosystem Dynamics Investigation (GEDI) provided canopy height data. The team consolidated results into maps and time-series which provide an in-depth depiction of aspen stand extent. The National Park Service will use these end products to assist in its management practices and inform wildlife restoration decisions within and beyond Yellowstone National Park.

Kyle Steen↗
NASA NTRS1984

Non-Gaussian statistical models of surface wave fields for remote sensing applications

Based on the complete Stokes wave model with the bias term and using a simple mapping approach and an iteration solution method, we established a formula for the joint probability density function of the surface slope elevation of a nonlinear random wave field. The formula requires three parameters to define the whole density function: the rms surface elevation and slope values and the significant slope. This model represents the dynamics of the wave in a more direct way than the Gram-Charlier approximation. Based on this new statistical model and laboratory experiments, formula and numerical values of EM bias and dynamics bias are derived. The results indicate that various biases should be considered seriously if accuracy of the altimeter measurement is required in centimeter range.

Huang, N. E.↗
NASA NTRS1993

Methods for evaluation of the microgravity environment aboard Space Station Freedom

Space Station Freedom will be a platform for microgravity research. For superior microgravity science, the experiment locations must experience very little acceleration in the quasi-steady, structural dynamic, and vibroacoustic frequency ranges. This paper presents the methods that were developed for evaluation of the microgravity environment in the structural dynamic range. An integrated finite element model of the space station was used to conduct analysis for the on-orbit microgravity environment. Methods were developed to evaluate sinusoidal, random, and transient disturbances. Sources of disturbances aboard the Space Station were quantified and forcing functions were assembled. The resulting acceleration levels at the experiment locations due to these disturbances were computed and assessed against the microgravity acceleration requirement curve.

Wetzel, John P.↗
NASA NTRS1957

The response of an airplane to random atmospheric disturbances

The statistical approach to the gust-load problem which consists in considering flight through turbulent air to be a stationary random process is extended by including the effect of lateral variation of the instantaneous gust intensity on the aerodynamic forces. The forces obtained in this manner are used in dynamic analyses of rigid and flexible airplanes free to move vertically, in pitch, and in roll. The effect of the interaction of longitudinal, vertical, and lateral gusts on the wing stresses is also considered.

LOADS, GUST - WINGS↗
NASA NTRS1958

The response of an airplane to random atmospheric disturbances

The statistical approach to the gust-load problem, which consists in considering flight through turbulent air to be a stationary random process, is extended by including the effect of lateral variation of the instantaneous gust intensity on the aerodynamic forces. The forces obtained in this manner are used in dynamic analyses of rigid and flexible airplanes free to move vertically, in pitch, and in roll. The effect of the interaction of longitudinal, normal, and lateral gusts on the wind stresses is also considered.

Diederich, Franklin W↗
NASA NTRS1996

Dynamics of Disorder-Order Transitions in Hard Sphere Colloidal Dispersions in micro-g

We performed a series of experiments on 0.518 millimeter PMMA spheres suspended in an index matching mixture of decalin and tetralin the microgravity environment provided by the Shuttle Columbia on mission STS-73. The samples ranged in concentration from 0.49 to 0.62. volume fraction (phi) of spheres, which covers the range in which liquid, coexistence, solid and glass phases are expected from Earth bound experiments. Light scattering was used to probe the static structure, and the particle dynamics. Digital and 35 mm photos provided information on the morphology of the crystals. In general, the crystallites grew considerably larger (roughly an order of magnitude larger) than the same samples with identical treatment in 1 g. The dynamic light scattering shows the typical short time diffusion and long time caging effects found in 1 g. The surprises that were encountered in microgravity include the preponderance of random hexagonal close packed (RHCP) structures and the complete absence of the expected face centered cubic (FCC) structure, existence of large dendritic crystals floating in the coexistence samples (where liquid and solid phases coexist) and the rapid crystallization of samples which exist only in glass phase under the influence of one g. These results suggest that colloidal crystal growth is profoundly effected by gravity in yet unrecognized ways. We suspect that the RCHP structure is related to the nonequilibrium growth that is evident from the presence of dendrites. An analysis of the dendritic growth instabilities is presented within the framework of the Ackerson-Schatzel equation.

Zhu, J. X.↗
NASA NTRS1980

Evaluation of a computer-generated perspective tunnel display for flight path following

The display was evaluated by monitoring pilot performance in a fixed base simulator with the vehicle dynamics of a CH-47 tandem rotor helicopter. Superposition of the predicted future vehicle position on the tunnel image was also investigated to determine whether, and to what extent, it contributes to better system performance (the best predicted future vehicle position was sought). Three types of simulator experiments were conducted: following a desired trajectory in the presence of disturbances; entering the trajectory from a random position, outside the trajectory; detecting and correcting failures in automatic flight. The tunnel display with superimposed predictor/director symbols was shown to be a very successful combination, which outperformed the other two displays in all three experiments. A prediction time of 4 to 7 sec. was found to optimize trajectory tracking for the given vehicle dynamics and flight condition. Pilot acceptance of the tunnel plus predictor/director display was found to be favorable and the time the pilot needed for familiarization with the display was found to be relatively short.

Grunwald, A. J.↗
NASA NTRS2017

Pre-Test Assessment of the Upper Bound of the Drag Coefficient Repeatability of a Wind Tunnel Model

A new method is presented that computes a pre{test estimate of the upper bound of the drag coefficient repeatability of a wind tunnel model. This upper bound is a conservative estimate of the precision error of the drag coefficient. For clarity, precision error contributions associated with the measurement of the dynamic pressure are analyzed separately from those that are associated with the measurement of the aerodynamic loads. The upper bound is computed by using information about the model, the tunnel conditions, and the balance in combination with an estimate of the expected output variations as input. The model information consists of the reference area and an assumed angle of attack. The tunnel conditions are described by the Mach number and the total pressure or unit Reynolds number. The balance inputs are the partial derivatives of the axial and normal force with respect to all balance outputs. Finally, an empirical output variation of 1.0 microV/V is used to relate both random instrumentation and angle measurement errors to the precision error of the drag coefficient. Results of the analysis are reported by plotting the upper bound of the precision error versus the tunnel conditions. The analysis shows that the influence of the dynamic pressure measurement error on the precision error of the drag coefficient is often small when compared with the influence of errors that are associated with the load measurements. Consequently, the sensitivities of the axial and normal force gages of the balance have a significant influence on the overall magnitude of the drag coefficient's precision error. Therefore, results of the error analysis can be used for balance selection purposes as the drag prediction characteristics of balances of similar size and capacities can objectively be compared. Data from two wind tunnel models and three balances are used to illustrate the assessment of the precision error of the drag coefficient.

drag coefficient measurement↗
NASA NTRS1975

Methods for Combining Payload Parameter Variations with Input Environment

Methods are presented for calculating design limit loads compatible with probabilistic structural design criteria. The approach is based on the concept that the desired limit load, defined as the largest load occuring in a mission, is a random variable having a specific probability distribution which may be determined from extreme-value theory. The design limit load, defined as a particular value of this random limit load, is the value conventionally used in structural design. Methods are presented for determining the limit load probability distributions from both time-domain and frequency-domain dynamic load simulations. Numerical demonstrations of the methods are also presented.

Merchant, D. H.↗
NASA NTRS1976

Methods for combining payload parameter variations with input environment

Methods are presented for calculating design limit loads compatible with probabilistic structural design criteria. The approach is based on the concept that the desired limit load, defined as the largest load occurring in a mission, is a random variable having a specific probability distribution which may be determined from extreme-value theory. The design limit load, defined as a particular of this random limit load, is the value conventionally used in structural design. Methods are presented for determining the limit load probability distributions from both time-domain and frequency-domain dynamic load simulations. Numerical demonstrations of the method are also presented.

Merchant, D. H.↗
NASA NTRS1976

Phase separation of metallic hydrogen-helium alloys

Calculations are presented for the thermodynamic functions and phase separation boundaries of solid metallic hydrogen helium alloys at temperatures between 0 K and 19,000 K and at pressures between 15 and 90 megabars. Expressions for the band structure energy of a randomly disordered alloy (including third order in the electron ion interaction) are derived and evaluated. Short and long range order are included by the quasi-chemical method, and lattice dynamics in the virtual crystal harmonic approximation. We conclude that at temperatures below 4,000 K there is complete phase separation of hydrogen helium alloys, and that a miscibility gap remains at the highest temperatures and pressures considered. The relevance of these results to models of the deep interior of Jupiter is briefly discussed.

Straus, D. M.↗
NASA NTRS1978

Dynamics of planetesimal formation and planetary accretion

The paper reviews the dynamical processes by which condensed matter in the solar nebula accumulates into planets. The basic processes are: (1) gravitational instability; (2) conversion of the radial gradient of orbital motion into random motion between planetesimals; and (3) collisions, which damp the random motion and result in aggregation and/or fragmentation of planetesimals. Each of these processes is defined analytically, and models, based on these results, of planetary growth, axial rotation rates, and formation of satellite systems are formulated.

Harris, A. W.↗
NASA NTRS1983

A stochastic-dynamic model for the spatial structure of forecast error statistics

The present investigation is concerned with the presentation of a simplified model of the spatial structure of forecast error statistics, a comparison of the model with actual numerical weather prediction results, and the extent to which simplifying assumptions made in the model are justified. A stochastic-dynamic model is derived for the spatial structure of the global atmospheric mass-field forecast error. The model states that the relative potential vorticity of the forecast error is random. The covariance function of the model's solutions is found to be governed by a simple deterministic equation. The agreement between the stochastic model and actual mass-field forecast errors fields for 12-36 h periods validates the assumptions on which the model is derived. Within this period, the difference between the potential voriticity fields of the atmosphere and of the numerical forecasts used in the comparison is well represented by white noise.

Balgovind, R.↗
NASA NTRS1987

The simulation of coherent structures in a laminar boundary layer

Coherent structures in turbulent shear flows were studied extensively by several techniques, including the VITA technique which selects rapidly accelerating or decelerating regions in the flow. The evolution of a localized disturbance in a laminar boundary layer shows strong similarity to the evolution of coherent structures in a turbulent-wall bounded flow. Starting from a liftup-sweep motion, a strong shear layer develops which shares many of the features seen in conditionally-sampled turbulent velocity fields. The structure of the shear layer, Reynolds stress distribution, and wall pressure footprint are qualitatively the same, indicating that the dynamics responsible for the structure's evolution are simple mechanisms dependent only on the presence of a high mean shear and a wall and independent of the effects of local random fluctuations and outer flow effects. As the disturbance progressed, the development of streak-like-high- and low-speed regions associated with the three-dimensionality.

Breuer, Kenny↗