Search NASA⌕ Search

SEARCH · Search NASA

Results for “Relative humidity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Test results from a comparative evaluation of a condensation nuclei fire detector

The fire/smoke alarm response of a condensation nuclei fire detector (CNFD) was compared with photoelectric and ionization detectors. Tests were conducted in a former control room 8.5 m by 8.9 with a 2.7 m ceiling. The room had air supplied from above the ceiling and under the floor with return air exiting from ceiling grills. The environment was varied from 278 to 305 K and relative humidities from 8 to 65%. Four detection zones were located in the room. Each zone contained a sampling head for the CNDF, a photodetector, and an ionization detector so that each detector system had four opportunities to alarm during tests. The particle level in the test room was also monitored during tests with a condensation nuclei particle counter. The CNFD responded to 90% of exposures to smoldering plastic and 84% of exposures to visible fire. The photoelectric response was 43 and 12.5% respectively for the same conditions. The ionization response was 9 and 48 respectively.

Bricker, R. W.↗
NASA NTRS1984

Cloud optical thickness feedbacks in the CO2 climate problem

A radiative-convective equilibrium model is developed and applied to study cloud optical thickness feedbacks in the CO2 climate problem. The basic hypothesis is that in the warmer and moister CO2-rich atmosphere, cloud liquid water content will generally be larger too. For clouds other than thin cirrus the result is to increase the albedo more than to increase the greenhouse effect. Thus, the sign of the feedback is negative: cloud optical properties act as a thermostat and alter in such a way as to reduce the surface and tropospheric warming caused by the addition of CO2. This negative feedback can be substantial. When observational estimates of the temperature dependence of cloud liquid water content are employed in the model, the surface temperature change caused by doubling CO2 is reduced by about one half. This result is obtained for global and annual average conditions, no change in cloud amount or altitude, and constant relative humidity. These idealizations, together with other simplifications typical of one-dimensional radiative-convective climate models, render the result tentative. Further study of cloud optical property feedbacks is warranted, however, because the climate is apparently so sensitive to them.

Somerville, R. C. J.↗
NASA NTRS1985

Friction, wear, transfer, and wear surface morphology of ultrahigh-molecular-weight polyethylene

Tribological studies at 25 C in a 50-percent-relative-humidity air atmosphere were conducted using hemispherically tipped 440 C HT (high temperature) stainless steel pins sliding against ultra-high-molecular-weight polyethylene (UHMWPE) disks. The results indicate that sliding speed, sliding distance, contact stress and specimen geometry can markedly affect friction, UHMWPE wear, UHMWPE transfer and the type of wear mechanisms that occur. Adhesion appears to be the predominant wear mechanism; but after long sliding distances at slow speeds, heavy ridges of transfer result which can induce fatigue-like wear on the UHMWPE disk wear track. In one instance, abrasive wear to the metallic pin was observed. This was caused by a hard particle embedded in the UHMWPE disk wear track.

Fusaro, R. L.↗
NASA NTRS1985

The effect of finite-amplitude baroclinic waves on passive, low-level, atmospheric constituents, with applications to comma cloud evolution

The redistribution of a low-level, passive constituent of the atmosphere under the influence of a growing baroclinic wave is examined by a series of analytical calculations based on a two-level, highly truncated model. It is shown that a constituent confined to the lower half of the atmosphere, and initially homogeneous in the horizontal, will tend to achieve maximum concentration in the low pressure/warm sector portion of the wave and minimum concentration in the high pressure/cold outbreak region with sharpest gradient between the maxima and minima roughly coinciding with the cold front. This distribution is further accentuated if an initial meridional gradient of the constituent exists. Assuming as a rough first approximation, that water vapor can be considered to be such a passive constituent, it is shown that the implied relative humidity field and cloud distribution will tend to evolve into the comma-type form commonly observed on satellite images of mid-latitude cyclone waves. Moreover, the solution is shown to replicate the complex flow regime associated with the comma formation, elucidating the dynamical roles of vertical motion and advection in the cloud evolution.

Saltzman, B.↗
NASA NTRS1985

Variational assimilation of VAS data into a mesoscale model Assimilation method and sensitivity experiments

The assimilation of temperature and moisture gradient information from the Visible IR Spin-Scan Radiometer's Atmospheric Sounder (VAS) into a mesoscale model is presently undertaken by means of a variational method and followed by tests of the sensitivity of both diabatic and adiabatic versions of the model to VAS data assimilations for the case of July 20-21, 1981. The synoptic scale effects of the assimilation of VAS data are noted to be negligible; the greatest impact was instead on mesoscale forecasts of convective instability patterns. The additional assimilation of relative humidity gradients did not significantly change the patterns of the forecast instabilities. The greatest improvements from assimilation resulted from the resolution of the strong mesoscale temperature gradients by the asynoptic VAS data.

Cram, J. M.↗
NASA NTRS1984

VAS data assimilation into a mesoscale model

In numerical weather prediction, one of the arising problems has always been related to insufficient data, especially in cases involving scales smaller than the synoptic rawinsonde network. The Visible Infrared Spin-Scan Radiometer (VISSR) Atmospheric Sounder (VAS) instrument on the Geostationary Operational Environmental Satellite (GOES) can provide mesoscale vertical profiles of temperature and moisture several times over a twelve hour period. However, as this data is only available over a relatively small area at any one time, the VAS data is more suited to data assimilation. A variational method has been developed to assimilate VAS data into a mesoscale model. In the present paper, the assimilation method and VAS data from one case are discussed. It is found that the greatest improvements to the forecast resulted when the VAS data resolved the mesoscale structure of the temperature and relative humidity fields.

Cram, J. M.↗
NASA NTRS1985

Atmospheric refractivity corrections in satellite laser ranging

Atmospheric refraction can cause significant errors in satellite laser ranging (SLR) systems. There are two techniques which can be used to correct for these errors. Atmospheric models based upon surface measurements of pressure, temperature, and relative humidity have been shown by ray tracing to be accurate to within a few centimeters at 20 deg elevation angle. The residual errors in the models are thought to be primarily caused by horizontal gradients in the refractivity. Although models have been developed to predict the gradient effects, initial studies show that they can be sensitive to local topographic effects. Atmospheric turbulence can introduce random fluctuations in the refractivity, but only introduces centimeter level errors at elevation angles below 10 deg. Pulsed two-color ranging systems can directly measure the atmospheric delay in satellite ranging. These systems require mode-locked multiple-frequency lasers and streak-camera-based receivers and currently appear capable of measuring the atmospheric delay with an accuracy of 0.5 cm or better.

Abshire, J. B.↗
NASA NTRS1985

Low-frequency absorption of sound in air

Thirty sets of sound absorption measurements in air at a pressure of 1 atmosphere are presented at temperatures from 10 C to 50 C, relative humidities from 0 to 100 percent, and frequencies from 10 to 2500 Hz. The measurements were conducted by the method of free decay in a resonant tube having a length of 18.261 m and bore diameter of 0.152 m. Background measurements in a gas consisting of 89.5 percent N2 and 10.5 percent Ar, a mixture which has the same sound velocity as air, permitted the wall and structural losses of the tube to be separated from the constituent absorption, consisting of classical rotational and vibrational absorption, in the air samples. The data were used to evaluate the vibrational relaxation frequencies of N2 and/or O2 for each of the 30 sets of meteorological parameters. Over the full range of humidity, the measured relaxation frequencies of N2 in air lie between those specified by ANSI Standard S1.26-1978 and those measured earlier in binary N2H2O mixtures. The measured relaxation frequencies could be determined only at very low values of humidity, reveal a significant trend away from the ANSI standard, in agreement with a prior investigation.

Zuckerwar, A. J.↗
NASA NTRS1985

Environmental monitoring of the orbiter payload bay and Orbiter Processing Facilities

Contamination control in the Orbiter Processing Facility (OPF) is studied. The clean level required in the OPF is generally clean, which means no residue, dirt, debris, or other extraneous contamination; various methods of maintaining this level of cleanliness are described. The monitoring and controlling of the temperature, relative humidity, and air quality in the OPF are examined. Additional modifications to the OPF to improve contamination control are discussed. The methods used to maintain the payload changeout room at a level of visually clean, no particulates are to be detected by the unaided eye, are described. The payload bay (PLB) must sustain the cleanliness level required for the specific Orbiter's mission; the three levels of clean are defined as: (1) standard, (2) sensitive, and (3) high sensitive. The cleaning and inspection verification required to achieve the desired cleanliness level on a variety of PLB surface types are examined.

Bartelson, D. W.↗
NASA NTRS1984

Atmospheric effects on remote sensing of surface reflectance

This paper reviews the atmospheric effects on remote sensing of surface reflectance. The scattering and absorption of sunlight by atmospheric molecules and aerosols affects the quality of images of the surface remotely sensed from satellites and aircrafts. The concentration and characteristics of the atmospheric aerosols vary from place to place and vary with time. The effect of atmospheric aerosols on the upward radiance depends on their optical thickness, scattering phase function and absorption. These parameters result from the aerosol concentration, composition, and the relative humidity. For high resolution images the aerosol scale height is also of importance. The radiative transfer theory that predicts the atmospheric radiances for a given surface and atmosphere is a well established theory for the case of uniform surfaces (or low resolution data). Some radiative transfer models exist for nonuniform surfaces and others are being developed. Recent field experiment and laboratory simulation data confirm the need for these models and can be used for their testing. It is shown that the atmospheric effect reduces the apparent resolution of satellite imagery and causes errors in the classification of surface fields. Suggestions for correction procedures are given. Such corrections can be based on ground observations, on satellite radiances above dark areas, or on climatologic information, depending on the accuracy of the corrections needed. The chosen correction algorithm depends also on the image resolution and the specific remote sensing application.

Kaufman, Y. J.↗
NASA NTRS1986

Computer modeling of photodegradation

A computer program to simulate the photodegradation of materials exposed to terrestrial weathering environments is being developed. Input parameters would include the solar spectrum, the daily levels and variations of temperature and relative humidity, and materials such as EVA. A brief description of the program, its operating principles, and how it works was initially described. After that, the presentation focuses on the recent work of simulating aging in a normal, terrestrial day-night cycle. This is significant, as almost all accelerated aging schemes maintain a constant light illumination without a dark cycle, and this may be a critical factor not included in acceleration aging schemes. For outdoor aging, the computer model is indicating that the night dark cycle has a dramatic influence on the chemistry of photothermal degradation, and hints that a dark cycle may be needed in an accelerated aging scheme.

Guillet, J.↗
NASA NTRS1986

Electrochemical aging effects in photovoltaic modules

Leakage currents were experimentally measured in PV modules undergoing natural aging outdoors, and in PV modules undergoing accelerated aging in laboratory environmental chambers. The significant contributors to module leakage current were identified with a long range goal to develop techniques to reduce or stop module leakage currents. For outdoor aging in general, module leakage current is relatively insensitive to temperature fluctuations, but is very sensitive to moisture effects such as dew, precipitation, and fluctuations in relative humidity. Comparing ethylene vinyl acetate (EVA) and polyvinyl butyral (PVB), module leakage currents are much higher in PVB as compared to EVA for all environmental conditions investigated. Leakage currents proceed in series along two paths, bulk conduction followed by interfacial (surfaces) conduction.

Mon, G. R.↗
NASA NTRS1986

Leakage-current properties of encapsulants

A theoretical modeling of leakage current in ethylene vinyl acetate (EVA) and polyvinyl butyral (PVB) modules is being developed and is described. The modeling effort derives mathematical relationships for the bulk and surface conductivites of EVA and PVB, the surface conductivities of glass and polymeric films, and the EVA and PVB pottants, all as functions of environmental parameters. Results from the modeling indicate that for glass/EVA, the glass surface controls the interfacial conductivity, although EVA bulk conductivity controls total leakage current. For PVB/glass, the interface conductivity controls leakage currents for relative humidity (RH) less than 40 to 50%, but PVB bulk conductivity controls leakage current above 50% RH.

Wen, L. C.↗
NASA NTRS1987

Characterization of the LTC catalyst: Performance against common air pollutants

One of the important qualities of the Low-Temperature Catalyst (LTC) is the rapid oxidation of carbon monoxide to carbon dioxide under a wide variety of conditions. The catalytic material is a palladium-copper activated complex which reacts with various contaminant molecules through a continuous oxidation/reduction cycle. The alumina substrate enhances LTC activity with its favorable surface chemistry and very high surface area. About 10 percent surface water is necessary to facilitate the oxidation of CO. This reaction shows a log-log dependence on contact time, suggesting a Langmuir-Hinshelwood mechanism. In the tube tests, LTC removed 90 to 100 percent of contaminating carbon monoxide in the temperature region of 20 to 4000 C, and at ambient over a range of 25 to 65 percent relative humidity. In contrast, NO2 is chemisorbed by the LTC/alumina material--the amount strongly dependent on temperature increases but independent of humidity. The LTC catalyst has demonstrated excellent capability to remove an important variety of hazardous pollutant gases which are common factors to poor indoor air quality. The Instapure Air Filtration System incorporates the LTC catalyst in a 50:50 mixture with activated carbon to effectively remove particulate, odors, and hazardous gases at room temperature and humidities. The ability to remove hazardous gases is unique for the category of portable air filtration equipment. The wide variety of pollutant gases that LTC removes suggests that catalytic technology is adaptable to a considerable range of commercial and industrial applications.

Collins, Marcia F.↗
NASA NTRS1986

Controlled environment life support system: Calcium-related leaf injuries on plants

Calcium related injuries to plants grown in controlled environments under conditions which maximize plant growth rates are described. Procedures to encourage movement of calcium into developing leaves of lettuce plants were investigated. The time course and pattern of calcium accumulation was determined to develop effective control procedures for this injury, termed tipburn. Procedures investigated were: (1) increasing the relative humidity to saturation during the dark period and altering root temperatures, (2) maximizing water stress during light and minimizing water stress during dark periods, (3) shortening the light-dark cycle lengths in combination with elevated moisture levels during the dark cycles, (4) reducing nutrient concentrations and (5) vibrating the plants. Saturated humidities at night increased the rate of growth and the large fluctuation in plant water potential encouraged calcium movement to the young leaves and delayed tipburn. Root temperature regulation between 15 and 26 C was not effective in preventing tipburn. Attempts to modulate water stress produced little variation, but no difference in tipburn development. Variations in light-dark cycle lengths also had no effect on calcium concentrations within developing leaves and no variation in tipburn development. Low concentrations of nutrient solution delayed tipburn, presumably because of greater calcium transport in the low concentration plants. Shaking of the plants did not prevent tipburn, but did delay it slightly.

Tibbitts, T. W.↗
NASA NTRS1986

The structure of the unstable marine boundary layer viewed by lidar and aircraft observations

The marine atmospheric boundary layer (MABL) during a cold-air outbreak off the Atlantic coast between New York and Virginia on January 20, 1983 is characterized on the basis of airborne lidar observations, vertical soundings (potential temperature, vapor mixing ratio, relative humidity, and wind), and horizontal (770-m) temperature records. The data are presented in tables and graphs and analyzed in detail. The organization of the MABL is defined by 1-2-km-scale roll vortices with up and downdrafts of 2-4 m/s at 210 m; north-south orientation of the roll axes (parallel to the low-level winds); rising arms coinciding with updrafts rich in moisture, aerosols, and heat; and 150-200-m (peak-to-trough) undulations of the inversion. Consideration is given to problems inherent in the interpretation of lidar data for MABL studies.

Atlas, D.↗
NASA NTRS1986

Polar stratospheric clouds inferred from satellite data

Anomalously high radiances from the ozone channel of the Limb Infrared Monitor of the Stratosphere (LIMS) sounding instrument have been observed in the Northern Hemisphere winter lower stratosphere. Such events, thought to be due to polar stratospheric clouds (PSCs), are examined further by computing relative humidities using Stratospheric Sounding Unit temperatures and water vapor measurements from the LIMS Map Archive Tape analyses. Regions identified as PSCs are found to correspond closely to regions of high humidity. While instances of saturation were found, the average humidity at the centers of 39 PSCs was calculated to be 58 percent. Possible reasons for this apparent discrepancy are discussed. Applying a similar approach to the Southern Hemisphere, in 1979, virtually no PSCs are found in the vortex after September 10 at 20 km. This result has important implications for a number of proposed explanations for the Antarctic ozone hole.

Austin, J.↗
NASA NTRS1987

Development of a two-dimensional zonally averaged statistical-dynamical model. I - The parameterization of moist convection and its role in the general circulation

The moist convection parameterization used in the GISS 3-D GCM is adapted for use in a two-dimensional (2-D) zonally averaged statistical-dynamical model. Experiments with different versions of the parameterization show that its impact on the general circulation in the 2-D model does not parallel its impact in the 3-D model unless the effect of zonal variations is parameterized in the moist convection calculations. A parameterization of the variations in moist static energy is introduced in which the temperature variations are calculated from baroclinic stability theory, and the relative humidity is assumed to be constant. Inclusion of the zonal variations of moist static energy in the 2-D moist convection parameterization allows just a fraction of a latitude circle to be unstable and enhances the amount of deep convection. This leads to a 2-D simulation of the general circulation very similar to that in the 3-D model. The experiments show that the general circulation is sensitive to the parameterized amount of deep convection in the subsident branch of the Hadley cell. The more there is, the weaker are the Hadley cell circulations and the westerly jets. The experiments also confirm the effects of momentum mixing associated with moist convection found by earlier investigators and, in addition, show that the momentum mixing weakens the Ferrel cell. An experiment in which the moist convection was removed while the hydrological cycle was retained and the eddy forcing was held fixed shows that moist convection by itself stabilizes the tropics, reduces the Hadley circulation, and reduces the maximum speeds in the westerly jets.

Yao, Mao-Sung↗