An unbiased census of active galactic nuclei in the two micron all sky survey
We present an unbiassed near-IR selected AGN sample, covering 12.56 square degrees to Ks approximately 15.5, selected from the Two Micron All Sky Survey (2MASS).
galaxies↗
SEARCH · Search NASA
Results for “Sample selection”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Components Refurbishment and Chemical Analysis Facility, SWMU #041 - Per- and Polyfluoroalkyl Substances Site Assessment Report Kennedy Space Center, Florida
This PFAS Site Assessment (SA) Report presents the activities and results associated with PFAS investigations at the Components Refurbishment and Chemical Analysis (CRCA) facility located at Kennedy Space Center (KSC), Florida. In 2022, CRCA was identified as an Area of Potential Concern because the facility stores several potential PFAS-containing chemicals. A groundwater sample collected from an onsite monitoring well detected PFOA and PFOS at concentrations greater than State of Florida provisional Groundwater Cleanup Target Levels (pGCTLs). PFAS SA activities were conducted between March 2022 and February 2024. During this timeframe, a total of 16 direct-push technology (DPT) locations and 82 discrete samples were collected from these locations, along with 90 monitoring well samples. The analytical data screening process focused on State of Florida pGCTLs and United States Environmental Protection Agency (USEPA) Regional Screening Level (RSLs) from November 2023 to evaluate the data. Analytical results identified PFOS, PFOA, and PFBA at concentrations exceeding their respective RSLs at each depth interval (shallow, intermediate, and deep). PFOS and PFOA had the largest footprint of RSL exceedances in each depth interval, but pGCTL exceedances were only observed at limited locations in the shallow and intermediate intervals. PFBA had the highest detections of any PFAS compound, with concentrations exceeding 180,000 nanograms per liter (ng/L), which is 100-times the RSL of 1,800 ng/L in the shallow and intermediate intervals and 10-times the RSL in the deep interval. The maximum PFBA detection was 841,000 ng/L at shallow monitoring well, MW0006. The PFAS SA also included samples collected from the onsite hydraulic containment system (HCS) which was installed to control and treat the onsite chlorinated volatile organic compound (CVOC) plume. Influent and effluent aqueous samples were collected monthly from the system. PFAS concentrations were relatively the same for both influent and effluent samples, indicating that while the HCS has been effective for CVOC treatment, it does not provide any additional treatment for PFAS compounds. Since the HCS has achieved its objectives, the system was shut down in December 2024. PFAS data gaps still exist, to include surface water and soil, which were not sampled during this SA. Soil sampling near the Chemical Process Area is recommended. Surface water and soil sampling at select stormwater outfalls is also recommended. Additionally, further groundwater sampling is recommended (DPT and monitoring well) in all depth intervals to delineate the extent of PFAS impacts at CRCA.
K Alex Murphy↗
Quasar evolution and luminosity function - An X-ray perspective
X-ray properties of optically selected QSOs are reviewed, and their implications for the QSO evolution and luminosity function are summarized. Analyses of the explicit dependence of the X-ray to optical luminosity ratio parameter alpha (a,x) on redshift z and optical luminosity Lo are described, and results from a recent analysis of complete, magnitude-limited samples of optically selected QSOs are presented. It is shown that probably all optically-selected QSOs are X-ray loud and that comparisons of the optical evolution and luminosity function, combined with the alpha(o,x)(z,Lo) dependence, with X-ray-selected samples are numerically sensitive to the details of the input.
Avni, Y.↗
OSIRIS-REx Touch-And-Go (TAG) Navigation Performance
The Origins Spectral Interpretation Resource identification Security Regolith Explorer (OSIRIS-REx) mission is a NASA New Frontiers mission launching in 2016 to rendezvous with the near-Earth asteroid (101955) Bennu in late 2018. Following an extensive campaign of proximity operations activities to characterize the properties of Bennu and select a suitable sample site, OSIRIES-REx will fly a Touch-And-Go (TAG) trajectory to the asteroid's surface to obtain a regolith sample. The paper summarizes the mission design of the TAG sequence, the propulsive required to achieve the trajectory, and the sequence of events leading up to the TAG event. The paper will summarize the Monte-Carlo simulation of the TAG sequence and present analysis results that demonstrate the ability to conduct the TAG within 25 meters of the selected sample site and +-2 cms of the targeted contact velocity. The paper will describe some of the challenges associated with conducting precision navigation operations and ultimately contacting a very small asteroid.
Spectral↗
Apollo 14 - Oxide, metal, and olivine mineral chemistries in 14072 with a bearing on the temporal relationships of subsolidus reduction
One of three primary objectives of the reported study is related to the definition of the distribution of troilite and Fe and the evaluation of the role of FeS in subsolidus reduction assemblages. Another objective was concerned with the definition of the lower limit of stabilizing elements such as Mg, Al, and Cr in ulvospinel to determine the terminal compositions at which reduction is inhibited. The third objective involves a comparison of the mineral chemistries of decomposed olivine with unaltered olivine in an attempt to determine the temperature limits. The sample was selected because it is one of the most intensely reduced samples returned from the moon. The model invoked for reduction is a magmatic-deuteric process which requires an environment approximating that of a closed system in which the volatile constituents are contained and in which reduction proceeds continuously with crystallization.
Haggerty, S. E.↗
OSIRI-REx Touch and Go (TAG) Navigation Performance
The Origins Spectral Interpretation Resource Identification Security Regolith Explorer (OSIRIS-REx) mission is a NASA New Frontiers mission launching in 2016 to rendezvous with the near-Earth asteroid (101955) Bennu in late 2018. Following an extensive campaign of proximity operations activities to characterize the properties of Bennu and select a suitable sample site, OSIRIS-REx will fly a Touch-And-Go (TAG) trajectory to the asteroid's surface to obtain a regolith sample. The paper summarizes the mission design of the TAG sequence, the propulsive maneuvers required to achieve the trajectory, and the sequence of events leading up to the TAG event. The paper also summarizes the Monte-Carlo simulation of the TAG sequence and presents analysis results that demonstrate the ability to conduct the TAG within 25 meters of the selected sample site and 2 cm/s of the targeted contact velocity. The paper describes some of the challenges associated with conducting precision navigation operations and ultimately contacting a very small asteroid.
Security Regolith Explorer↗
NASA GeneLab Multi-study Visualization Portal
NASA GeneLab has helped advance the field of Space Biology by providing a public repository where researchers can store, share, analyze and visualize the results of space flight related omics experiments. The GeneLab data visualization portal allows any user, regardless of bioinformatics knowledge or access to computational resources, to interact with the experimental data, draw their own conclusions, and gain insights about the effects of space on living systems. These tools help democratize scientific research and foster the NASA Open Science initiative. The new multi-study feature of the GeneLab visualization platform allows users to mine study metadata from RNA sequencing (RNA-seq) experiments to identify samples of interest by filtering datasets based on organism, tissue, assay technology type, and/or factor. Once samples are selected from multiple datasets, users can combine and normalize the sample data, then utilize the visualization displays, including Principal Component Analysis (PCA) plots, to assess sample distributions. Finally, users can perform differential gene expression analysis on the combined data and visualize the results through PCA plots, Volcano plots, Pair plots, Heatmap, Ideogram and Gene Set Enrichment Analysis. All user-generated results and visualizations will be available for download. Here, we present a biological study using samples from multiple GeneLab RNA-seq datasets and analyzed using the multi-study visualization platform to demonstrate inter- and intra-study variability, as well as commonly differentially expressed genes between spaceflight and ground control conditions across datasets. This new feature opens a wide range of possibilities and opportunities for further development including combining other assay technology types and integration with batch effect correction techniques and machine learning applications. Overall, this tool allows users to increase the statistical power of individual experiments, validate hypothesis, identify patterns, and opens the door to new and exciting research.
space biology↗
Determination of trace gases in learjet and U-2 whole air samples collected during the intertropical convergence zone experiment
The contribution of Washington State University (WSU) to the Intertropical Convergence Zone (ITCZ) study, conducted in the Panama Canal Zone in July 1977 is reported. The ITCZ program had the objective to study the meteorology and air chemistry to determine, if possible, the magnitude of injection of tropospheric air into the stratosphere in the ITCZ. WSU was responsible for two phases of the air chemistry program for the ITCZ study: (1) the collection of whole-air samples from ground level to 13.7 km using a Learjet as a sampling platform, and the analysis of the samples for selected halocarbons, C2 hydrocarbons, N2O, and SF6; and (2) the analysis for selected halocarbon species and N2O of low pressure whole-air samples, collected between 13.7 km and 21.3 km by a U-2 aircraft. The report is divided into separate sections describing the Learjet and the U-2 sampling methods, analytical methods, and results. Complete data tables for all samples analyzed are given.
Cronn, D. R.↗
Application of CO2 Snow Jet Cleaning in Conjunction with Laboratory Based Total Reflection X-Ray Fluorescence
The Genesis mission was the first mission returning solar material to Earth since the Apollo program [1,2]. Unfortunately the return of the space craft on September 8, 2004 resulted in a crash landing, which shattered the samples into small fragments and exposed them to desert soil and other debris. Thus only small fragments of the original collectors are available, each having different degrees of surface contamination. Thorough surface cleaning is required to allow for subsequent analysis of solar wind material embedded within. An initial cleaning procedure was developed in coordination with Johnson Space Center which focused on removing larger sized particulates and a thin film organic contamination acquired during collection in space [3]. However, many of the samples have additional residues and more rigorous and/or innovative cleaning steps might be necessary. These cleaning steps must affect only the surface to avoid leaching and re-distribution of solar wind material from the bulk of the collectors. To aid in development and identification of the most appropriate cleaning procedures each sample has to be thoroughly inspected before and after each cleaning step. Laboratory based total reflection X-ray fluorescence (TXRF) spectrometry lends itself to this task as it is a non-destructive and surface sensitive analytical method permitting analysis of elements from aluminum onward present at and near the surface of a flat substrate [4]. The suitability of TXRF has been demonstrated for several Genesis solar wind samples before and after various cleaning methods including acid treatment, gas cluster ion beam, and CO2 snow jet [5 - 7]. The latter one is non-invasive and did show some promise on one sample [5]. To investigate the feasibility of CO2 snow jet cleaning further, several flown Genesis samples were selected to be characterized before and after CO2 snow application with sample 61052 being discussed below.
Schmeling, M.↗
GeoLab: A Geological Workstation for Future Missions
The GeoLab glovebox was, until November 2012, fully integrated into NASA's Deep Space Habitat (DSH) Analog Testbed. The conceptual design for GeoLab came from several sources, including current research instruments (Microgravity Science Glovebox) used on the International Space Station, existing Astromaterials Curation Laboratory hardware and clean room procedures, and mission scenarios developed for earlier programs. GeoLab allowed NASA scientists to test science operations related to contained sample examination during simulated exploration missions. The team demonstrated science operations that enhance theThe GeoLab glovebox was, until November 2012, fully integrated into NASA's Deep Space Habitat (DSH) Analog Testbed. The conceptual design for GeoLab came from several sources, including current research instruments (Microgravity Science Glovebox) used on the International Space Station, existing Astromaterials Curation Laboratory hardware and clean room procedures, and mission scenarios developed for earlier programs. GeoLab allowed NASA scientists to test science operations related to contained sample examination during simulated exploration missions. The team demonstrated science operations that enhance the early scientific returns from future missions and ensure that the best samples are selected for Earth return. The facility was also designed to foster the development of instrument technology. Since 2009, when GeoLab design and construction began, the GeoLab team [a group of scientists from the Astromaterials Acquisition and Curation Office within the Astromaterials Research and Exploration Science (ARES) Directorate at JSC] has progressively developed and reconfigured the GeoLab hardware and software interfaces and developed test objectives, which were to 1) determine requirements and strategies for sample handling and prioritization for geological operations on other planetary surfaces, 2) assess the scientific contribution of selective in-situ sample characterization for mission planning, operations, and sample prioritization, 3) evaluate analytical instruments and tools for providing efficient and meaningful data in advance of sample return and 4) identify science operations that leverage human presence with robotic tools. In the first year of tests (2010), GeoLab examined basic glovebox operations performed by one and two crewmembers and science operations performed by a remote science team. The 2010 tests also examined the efficacy of basic sample characterization [descriptions, microscopic imagery, X-ray fluorescence (XRF) analyses] and feedback to the science team. In year 2 (2011), the GeoLab team tested enhanced software and interfaces for the crew and science team (including Web-based and mobile device displays) and demonstrated laboratory configurability with a new diagnostic instrument (the Multispectral Microscopic Imager from the JPL and Arizona State University). In year 3 (2012), the GeoLab team installed and tested a robotic sample manipulator and evaluated robotic-human interfaces for science operations.
Evans, Cynthia↗
Some lessons from Apollo for a sampling strategy on Mars for understanding the origin of the ancient igneous crust and the composition of the mantle
Proper site selection for sample collection is crucial to determining the nature and time scales of major events on Mars. Analysis and interpretation of lunar samples acquired by the Apollo lunar missions provides valuable experience on the effects of site selection. Lunar selection techniques are briefly examined.
Korotev, Randy L.↗
Demonstration of neutron identification in neutrino interactions in the MicroBooNE liquid argon time projection chamber
A significant challenge in measurements of neutrino oscillations is reconstructing the incoming neutrino energies. While modern fully-active tracking calorimeters such as liquid argon time projection chambers in principle allow the measurement of all final state particles above some detection threshold, undetected neutrons remain a considerable source of missing energy with little to no data constraining their production rates and kinematics. We present the first demonstration of tagging neutrino-induced neutrons in liquid argon time projection chambers using secondary protons emitted from neutron-argon interactions in the MicroBooNE detector. We describe the method developed to identify neutrino-induced neutrons and demonstrate its performance using neutrons produced in muon-neutrino charged current interactions. The method is validated using a small subset of MicroBooNE’s total dataset. The selection yields a sample with 60% of selected tracks corresponding to neutron-induced secondary protons. At this purity, the integrated efficiency is 8.4% for neutrons that produce a detectable proton.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Detecting Neutrons in MicroBooNE
A significant challenge in measurements of neutrino oscillations is reconstructing the incoming neutrino energies. While modern fully-active tracking calorimeters such as liquid argon time projection chambers in principle allow the measurement of all final state particles above some detection threshold, undetected neutrons remain a considerable source of missing energy with little to no data constraining their production rates and kinematics. We present the first demonstration of tagging neutrino-induced neutrons in liquid argon time projection chambers using secondary protons emitted from neutron-argon interactions in the MicroBooNE detector. We describe the method developed to identify neutrino-induced neutrons and demonstrate its performance using neutrons produced in muon-neutrino charged current interactions. The method is validated using a small subset of MicroBooNE's total dataset. The selection yields a sample with $60\%$ of selected tracks corresponding to neutron-induced secondary protons.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Extension of Space Food Shelf Life Through Hurdle Approach
The processed and prepackaged space food system is the main source of crew nutrition, and hence central to astronaut health and performance. Unfortunately, space food quality and nutrition degrade to unacceptable levels in two to three years with current food stabilization technologies. Future exploration missions will require a food system that remains safe, acceptable and nutritious through five years of storage within vehicle resource constraints. The potential of stabilization technologies (alternative storage temperatures, processing, formulation, ingredient source, packaging, and preparation procedures), when combined in hurdle approach, to mitigate quality and nutritional degradation is being assessed. Sixteen representative foods from the International Space Station food system were chosen for production and analysis and will be evaluated initially and at one, three, and five years with potential for analysis at seven years if necessary. Analysis includes changes in color, texture, nutrition, sensory quality, and rehydration ratio when applicable. The food samples will be stored at -20 C, 4 C, and 21 C. Select food samples will also be evaluated at -80 C to determine the impacts of ultra-cold storage after one and five years. Packaging film barrier properties and mechanical integrity will be assessed before and after processing and storage. At the study conclusion, if tested hurdles are adequate, formulation, processing, and storage combinations will be uniquely identified for processed food matrices to achieve a five-year shelf life. This study will provide one of the most comprehensive investigations of long duration food stability ever completed, and the achievement of extended food system stability will have profound impacts to health and performance for spaceflight crews and for relief efforts and military applications on Earth.
Cooper, M. R.↗
Preliminary Examination Process of Apollo Core 73002 - Insights and Lessons Learned From ANGSA for Future Sample Return Missions
Apollo Sample 73002 is part of a 2-foot long “drive tube” (73001/73002) of regolith that was collected from a landslide deposit near Lara Crater at the Apollo 17 site, Station 3. The double drive tube is believed to have penetrated a lunar landslide deposit that was transported from the slope of the South Massif into the TLV [1]. As part of the ANGSA (Apollo Next Generation Sample Analyses) initiative, preparing preliminary examination (PE) catalog of 73002 is a crucial first step for the early identification of material types such as rock fragments, and potential stratigraphy within the core. PE of Apollo core 73002 is distinct from science activities with the main goal to produces a sample catalog with a level of detail about sample characterization that is sufficient for the ANGSA PIs (and later on the lunar sample community) to select and request the samples to conduct their individual, scientific studies. Ultimately, the PE catalog of 73002 will help to establish a better understanding of the stratigraphy of the land slide deposit; the processes of the landslide including the trigger(s) and possibly number of landslide events, as well as the role of volatiles [1] and will aid in the careful preservation of the material for future studies [2].
Apollo↗
Detecting Neutrons in MicroBooNE
A significant challenge in measurements of neutrino oscillations is reconstructing the incoming neutrino energies. While modern fully-active tracking calorimeters such as liquid argon time projection chambers in principle allow the measurement of all final state particles above some detection threshold, undetected neutrons remain a considerable source of missing energy with little to no data constraining their production rates and kinematics. We present the first demonstration of tagging neutrino-induced neutrons in liquid argon time projection chambers using secondary protons emitted from neutron-argon interactions in the MicroBooNE detector. We describe the method developed to identify neutrino-induced neutrons and demonstrate its performance using neutrons produced in muon-neutrino charged current interactions. The method is validated using a small subset of MicroBooNE's total dataset. The selection yields a sample with $60\%$ of selected tracks corresponding to neutron-induced secondary protons.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Mars Lander/Rover vehicle development: An advanced space design project for USRA and NASA/OAST
A design is proposed for a Mars Lander/Rover (MLR) for use in gathering needed environmental and surface information. The design focus will be upon a Mars Lander/Rover that will leave an orbit around Mars, reenter and soft land on the Martian surface, and move sequentially to widely scattered locations to sample, measure, and analyze the Martian environmental and surface conditions. Primary goals will be payload mass and size definition, characterization of the Martian atmosphere, selection of sampling locations, identification of alternative design concepts, selection of a preferred design, team organization, and preparation for the detailed design phase.
Source record↗
Can local white dwarfs constrain dark matter interactions?
We investigate whether nearby white dwarfs (WDs) can constrain dark matter (DM) interactions with ordinary matter. As experimental sensitivity improves, driven by the Gaia mission, the sample volume of nearby WDs has been increasing over recent years. We carefully select a sample of ten cold, isolated, non-magnetic WDs within 13 pc of the Sun. We model their carbon-oxygen interior using a finite temperature relativistic equation of state and model atmospheres to infer their core temperatures. This enables us to perform a thorough estimation of the DM capture rate and evaporation mass using actual astrophysical observations. Given the low local DM density, we focus on DM that annihilates into long-lived mediators, which escape the WD and later decay into photons. While Fermi-LAT data shows no significant gamma-ray excess, future telescopes, CTA North & South, LHAASO, SWGO, could probe DM-nucleon cross sections down to ∼ 10 -41 cm 2 for DM masses above the TeV scale. Our results are competitive with current direct detection bounds (e.g., LZ) in the multi-TeV regime. This work underscores the importance of systematic WD studies in the broader landscape of DM detection and demonstrates the synergy between astrophysical and terrestrial searches in exploring DM interactions.
79 ASTRONOMY AND ASTROPHYSICS↗