Search NASA⌕ Search

SEARCH · Search NASA

Results for “Scattering problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Hydrodynamic and Radiographic Toolbox (HART)

With a multi-lab and university team, we propose to develop new methods for a Hydrodynamic and Radiographic Toolbox (HART) that will enable a fuller and more extensive use of experimental radiographic data towards better characterizing and reducing uncertainties in predictive modeling of weapons performance. We will achieve this by leveraging recent developments in areas of computational imaging, statistical and machine learning, and reduced order modeling of hydrodynamics. In terms of software practices, by partnering with XCP (RISTRA Project) we will conform to recent XCP standards that are inline with modern software practices and standards and ensure compatibility and ease of inter-operability with existing codes. Three new activities under this proposal include (a) the development and use of deep learning-based surrogates to accelerate reconstruction and variational inference of density fields from radiographs of hydrotests, (b) a model-data fusion strategy that couples deep learning-based density reconstructions with fast hydrodynamics simulators to better constrain the reconstruction, and (c) a method for treating asymmetries using techniques adopted from limited view tomography. All three new activities will be based on improved treatment of scatter, noise, beam spot movement, detector blur, and flat fielding in the forward model, and a use of sophisticated priors to aid in the re construction. The improvements to the forward model and improved algorithmic design of the reconstruction when complete will be contained in the iterative reconstruction code SHIVA—a code project that we have recently initiated. The many ways in which machine learning can be used in the reconstruction work will be contained in a code HERMES that has been initiated with DTRA support. For example, the significant levels of acceleration that will likely be achieved by the use of machine learning techniques will permit us (and are required) to quantify uncertainties in density retrievals. Next, the two-way coupling between density reconstruction and model-based simulation of the hydrodynamics will be contained in code EREBUS, and will permit a fuller realization of the potential of the data to constrain the hydrodynamic model and better address issues related to asymmetries in the problem. Finally, we anticipate that the better consistency with physics achieved in our reconstructions will allow them to be used by X-Division more so than today.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2025

Identifying environmentally induced calibration changes in cryogenic RF axion detector systems using deep neural networks

The axion is a compelling hypothetical particle that could account for the dark matter in our universe while simultaneously solving the strong CP problem in quantum chromodynamics. The most sensitive axion detection technique demonstrated so far makes use of a high Q cavity immersed in a strong magnetic field, where axions are converted to microwave photons. This is called an axion haloscope and has primarily targeted the 1–10 GHz range. As searches scan up in axion mass, toward the parameter space favored by theoretical predictions, individual cavity sizes decrease in order to achieve higher frequencies. This shrinking cavity volume translates directly to a loss in signal-to-noise, motivating the plan to replace individual cavity detectors with arrays of cavities. When the transition from one to (N) multiple cavities occurs, haloscope searches are anticipated to become much more complicated to operate, requiring N times as many measurements but also the new requirement that N detectors operate in unison, which can be achieved by locking them to a common frequency. To offset this anticipated increase in detector complexity, we aim to develop new tools for diagnosing experiments using neural networks. Current experiments monitor scattering parameters of their receiver for periodically measuring cavity quality factor and coupling. However, off-resonant data remain relatively useless. In this paper, we ask if it is possible that off-resonant information contained in vector network analyzer scans could be used to diagnose equipment failures/anomalies and measure physical conditions (e.g., temperatures and ambient magnetic field). We demonstrate a proof-of-concept that AI techniques can help manage the complexity of an axion haloscope search for operators.

Engel, Andrew W. [Pacific Northwest National Labor↗
DOE OSTI2021

Iron, magnesium, and titanium isotopic fractionations between garnet, ilmenite, f ayalite, biotite, and tourmaline: Results from NRIXS, ab initio , and study of mineral separates from the Moosilauke metapelite

Interpreting isotopic signatures documented in natural rocks requires knowledge of equilibrium isotopic fractionation factors. Here, we determine equilibrium Fe isotope fractionation factors between several common rock-forming minerals using a comparative approach involving three independent methods: (i) isotopic analyses of natural minerals from a metapelite from Mt. Moosilauke, New Hampshire, for which equilibration temperature and pressure are well constrained to be near the aluminosilicate triple point (T ≃ 500 °C, P ≃ 4 kbar), (ii) Nuclear Resonant Inelastic X-ray Scattering (NRIXS) measurements of Fe force constants of minerals, and (iii) Density Functional Theory (DFT) ab initio calculations of Fe force constants of minerals. The minerals studied for Fe isotopes include, in increasing order of their β-factors: garnet < ilmenite ≈ fayalite < biotite < tourmaline < muscovite ≈ plagioclase. Some of this ordering is affected by the presence of Fe 3+ in the minerals, which tends to form stiffer bonds and be associated with heavy Fe isotope enrichments relative to Fe 2+ . We are, however, able to assess the magnitude of the effect of the ratio Fe 3+ /ΣFe on equilibrium fractionation factors, notably on the ilmenite-hematite solid solution. Equilibrium Fe isotopic fractionation factors between garnet, ilmenite, biotite, tourmaline and fayalite are determined. We also report Mg and Ti isotopic compositions of selected Moosilauke minerals that allow us to better constrain the equilibrium fractionation factors for garnet-biotite-tourmaline (Mg isotopes) and biotite-ilmenite (Ti isotopes). We show how the newly determined equilibrium fractionation factors can be used to address diverse problems in Earth and planetary sciences, notably (i) Fe and Mg isotopic fractionation during anatexis, (ii) Fe isotopic fractionation in lunar ilmenite, and (iii) Ti isotopic fractionation during fluvial transport of minerals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Proceedings of RIKEN BNL Research Center Workshop: Small-x Physics in the EIC Era [Slides]

Understanding the high energy limit of hadronic and nuclear collisions is at the forefront of nuclear and particle physics. When boosted to ultrahigh energies, all hadrons and nuclei eventually transform into a universal form of matter called the Color Glass Condensate (CGC). The CGC is characterized by the high density (saturation) of small-x gluons which leads to distinct experimental signatures. Tantalizing hints of the CGC have been observed at HERA, RHIC and the LHC, but the prospects for the discovery of the CGC are more promising at future experiments such as the Electron-Ion Collider (EIC) at BNL Indeed, according to the National Science Academy report published in 2019, one of the three major goals of the EIC is to address the nature of the gluon saturation. (The other two are the mass and spin structure of the nucleons.) With this in mind, the small-x community is gearing up to meet the challenges of the EIC era. Over the past several years, there has been impressive progress in the next-to-leading order (NLO) calculations in the CGC framework of various observables such as single hadron production in proton-nucleus collisions, inclusive and exclusive dijet and trijet production in Deep Inelastic Scattering (DIS), jet-plus-photon production in DIS, etc. We expect that NLO calculations will be the standard tool to confront future experimental data at the EIC. Another emerging trend of the community is the interplay between small-x physics and spin physics. The RHIC result for the gluon helicity ΔG has underscored the necessity to understand the longitudinal spin structure of the proton at small-x. There have been theoretical indications that a significant fraction of spin and orbital angular momentum is stored in the small-x region. As for the transversely polarized proton, a surprising new connection between the gluon Sivers function at small-x and the QCD Odderon has been pointed out and its implications at the EIC has been discussed. In view of these developments, we think it is timely to organize a dedicated workshop on small-x physics to summarize the present status of the field and to discuss future directions. A major focus of this workshop will be to identify outstanding problems that could significantly benefit from collaborative efforts amongst scientists working on formal, phenomenological, and computational aspects of small-x physics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

An energy-modified quantum defect method for the analysis of Rydberg spectra: Application to 2-butyne

The high resolution Rydberg absorption spectrum of 2-butyne C 4 H 6 recorded previously at the SOLEIL synchrotron facility has been interpreted using multichannel quantum defect theory (MQDT). The calculations are based on the continuum scattering calculations of Xu et al., J. Chem. Phys. 136, 154303 (2012) and of Jacovella et al., J. Phys. Chem. A 119, 12339 (2015) pertaining to the dipole-allowed excited state symmetries in absorption from the ground state. In contrast to the traditional approach of calculating low-lying electronic states first and then attempting to extend the calculations to ever higher energy, here the analysis proceeds through the extension of these detailed calculations of the electronic continuum scattering down into the discrete region of the spectrum. The continuum reaction matrices and dipole transition moments are adapted to the discrete Rydberg region via the use of an energy-modified formulation of MQDT theory and associated energy dependences of the quantum defects. The analysis reproduces more than 40 Rydberg states from n ≈ 10 down to the 3 d and 4 s levels with an rms error of better than 20 cm −1 . Further, these belong to five Rydberg series with three different molecular symmetries. While the approach predicts many additional series, most of these are calculated and observed to carry only little oscillator strength. The analysis shows that the Rydberg spectrum is dominated by the excitation of an e″ symmetry electron of fδ and gπ type, in line with what previous studies of the above-threshold shape resonance of 2-butyne have shown. The present study is intended to serve as an example showing how first principles continuum calculations may be useful for the interpretation of highly bound discrete states in a range that poses problems for the standard ab initio techniques. The quantitative treatment of the dipole absorption cross sections is deferred to a future paper.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Optimal gas cooling with minimal aero-opticaldistortion for next generation high-average-power lasers (Progress report, Year 2)

Next-generation lasers that combine high-peak-power ultrashort pulses with high repetition rates have the potential to efficiently deliver the high-average-power outputs required for inertial fusion energy generation, laser-based particle acceleration, and to generate compact secondary x- and 𝛾-ray radiation sources, among others. The combination of long gain length with high surface-to-volume ratio to remove residual heat makes gas-cooled multi-slab amplifier heads an inherently aperture- and average power scalable technology that enables this new class of solid-state lasers, and their thermal management becomes the most pressing technical challenge. As the index-of refraction depends on the gas density, heat removal from the slab surfaces unavoidably entails scattering of propagated light from regions of high temperature fluctuations. The requirement to maximize convective heat extraction from the gain medium under the constraint of minimum optical aberration of the beam renders amplifier slab cooling a technological challenge at the intersection of aero-optics, fluid-mechanics and heat transfer. The goal of this research is to leverage computational fluid dynamics and aero optics simulations of different levels of fidelity to devise a numerical modeling and optimization framework for gas-cooled multi-slab amplifiers. The project will be conducted in close collaboration with the Advanced Photon Technologies Group at Lawrence Livermore National Laboratory, where a gas-cooled test stand for laser materials and thermal management structures will be developed and installed. The final goal of the collaborative effort is to manufacture and benchmark a physical prototype of an numerically optimized amplifier head design. Measurement data on solid-state and thermo-optical distortions will be used for the validation of the numerical models. The key technical challenge in this multi-objective design problem is that of balancing optimal heat removal with minimal optical distortion. To facilitate computationally efficient design optimization and, at the same time, deepen our basic understanding of the interaction of light with turbulence, a complementary study that combines high and low-fidelity flow simulations and aero-optical models is proposed. Along the lines of these two objectives and solution strategies, the project is organized into two thrusts.

42 ENGINEERING↗
DOE OSTI2022

Path integral Monte Carlo approach to the structural properties and collective excitations of liquid $$^3{\text {He}}$$ without fixed nodes

Abstract Due to its nature as a strongly correlated quantum liquid, ultracold helium is characterized by the nontrivial interplay of different physical effects. Bosonic $$^4{\text {He}}$$ 4 He exhibits superfluidity and Bose-Einstein condensation. Its physical properties have been accurately determined on the basis of ab initio path integral Monte Carlo (PIMC) simulations. In contrast, the corresponding theoretical description of fermionic $$^3{\text {He}}$$ 3 He is severely hampered by the notorious fermion sign problem, and previous PIMC results have been derived by introducing the uncontrolled fixed-node approximation. In this work, we present extensive new PIMC simulations of normal liquid $$^3{\text {He}}$$ 3 He without any nodal constraints. This allows us to to unambiguously quantify the impact of Fermi statistics and to study the effects of temperature on different physical properties like the static structure factor $$S({\mathbf {q}})$$ S ( q ) , the momentum distribution $$n({\mathbf {q}})$$ n ( q ) , and the static density response function $$\chi ({\mathbf {q}})$$ χ ( q ) . In addition, the dynamic structure factor $$S({\mathbf {q}},\omega )$$ S ( q , ω ) is rigorously reconstructed from imaginary-time PIMC data. From simulations of $$^3{\text {He}}$$ 3 He , we derived the familiar phonon–maxon–roton dispersion function that is well-known for $$^4{\text {He}}$$ 4 He and has been reported previously for two-dimensional $$^3{\text {He}}$$ 3 He films (Nature 483:576–579 (2012)). The comparison of our new results for both $$S({\mathbf {q}})$$ S ( q ) and $$S({\mathbf {q}},\omega )$$ S ( q , ω ) with neutron scattering measurements reveals an excellent agreement between theory and experiment.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

SAXS studies of X-ray induced disulfide bond damage: Engineering high-resolution insight from a low-resolution technique

A significant problem in biological X-ray crystallography is the radiation chemistry caused by the incident X-ray beam. This produces both global and site-specific damage. Site specific damage can misdirect the biological interpretation of the structural models produced. Cryo-cooling crystals has been successful in mitigating damage but not eliminating it altogether; however, cryo-cooling can be difficult in some cases and has also been shown to limit functionally relevant protein conformations. The doses used for X-ray crystallography are typically in the kilo-gray to mega-gray range. While disulfide bonds are among the most significantly affected species in proteins in the crystalline state at both cryogenic and higher temperatures, there is limited information on their response to low X-ray doses in solution, the details of which might inform biomedical applications of X-rays. In this work we engineered a protein that dimerizes through a susceptible disulfide bond to relate the radiation damage processes seen in cryo-cooled crystals to those closer to physiologic conditions. This approach enables a low-resolution technique, small angle X-ray scattering (SAXS), to detect and monitor a residue specific process. A dose dependent fragmentation of the engineered protein was seen that can be explained by a dimer to monomer transition through disulfide bond cleavage. This supports the crystallographically derived mechanism and demonstrates that results obtained crystallographically can be usefully extrapolated to physiologic conditions. Fragmentation was influenced by pH and the conformation of the dimer, providing information on mechanism and pointing to future routes for investigation and potential mitigation. The novel engineered protein approach to generate a large-scale change through a site-specific interaction represents a promising tool for advancing radiation damage studies under solution conditions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

SANS quantification of bound water in water-soluble polymers across multiple concentration regimes

Contrast-variation small-angle neutron scattering (CV-SANS) is a widely used technique for quantifying hydration water in soft matter systems, but it is predominantly applied in the dilute regime or for systems with a well-defined structure factor. Here, CV-SANS was used to quantify the number of hydration water molecules associating with three water-soluble polymers with different critical solution temperatures and types of water–solute interactions in dilute, semidilute, and concentrated solution through the exploration of novel methods of data fitting and analysis. Multiple SANS fitting workflows with varying levels of model assumptions were evaluated and compared to give insight into SANS model selection. These fitting pathways ranged from general, model-free algorithms to more standard form and structure factor fitting. In addition, Monte Carlo bootstrapping was evaluated as a method to estimate parameter uncertainty through simulation of technical replicates. The most robust fitting workflow for dilute solutions was found to be form factor fitting without CV-SANS ( i.e. polymer in 100% D 2 O). For semidilute and concentrated solutions, while the model-free approach can be mathematically defined for CV-SANS data, the addition of a structure factor imposes physical constraints on the optimization problem, suggesting that the optimal fitting pathway should include appropriate form and structure factor models. The measured hydration numbers were consistent with the number of tightly bound water molecules associated with each monomer unit, and the concentration dependence of the hydration number was largely governed by the chemistry-specific interactions between water and polymer. Polymers with weaker water–polymer interactions ( i.e. those with fewer hydration water molecules) were found to have more bound water at higher concentrations than those with stronger water–polymer interactions due to the increase in the number of forced water–polymer contacts in the concentrated system. This SANS-based method to count hydration water molecules can be applied to polymers in any concentration regime, which will lead to improved understanding of water–polymer interactions and their impact on materials design.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Experimental characterization of hot-electron emission and shock dynamics in the context of the shock ignition approach to inertial confinement fusion

We report on planar target experiments conducted on the OMEGA-EP laser facility performed in the context of the shock ignition (SI) approach to inertial confinement fusion. The experiment aimed at characterizing the propagation of strong shock in matter and the generation of hot electrons (HEs), with laser parameters relevant to SI (1-ns UV laser beams with I ~10 16 W/cm 2 ). Time-resolved radiographs of the propagating shock front were performed in order to study the hydrodynamic evolution. The hot-electron source was characterized in terms of Maxwellian temperature, T h , and laser to hot-electron energy conversion efficiency η using data from different x-ray spectrometers. The post-processing of these data gives a range of the possible values for T h and η [i.e., T h [keV] ϵ (20, 50) and η ϵ (2%, 13%)]. These values are used as input in hydrodynamic simulations to reproduce the results obtained in radiographs, thus constraining the range for the HE measurements. According to this procedure, we found that the laser converts ~10% ± 4% of energy into hot electrons with T h = 27 ± 8 keV. The paper shows how the coupling of different diagnostics and numerical tools is required to sufficiently constrain the problem, solving the large ambiguity coming from the post-processing of spectrometers data. The effect of the hot electrons on the shock dynamics is then discussed, showing an increase in the pressure around the shock front. Furthermore, the low temperature found in this experiment without pre-compression laser pulses could be advantageous for the SI scheme, but the high conversion efficiency may lead to an increase in the shell adiabat, with detrimental effects on the implosion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Unitary Bethe-Salpeter Methods in Two- and Three-Body Systems

The study of resonances, unstable particles formed in particle scattering, is motivated by the questions about the strong interaction and the composition of hadrons. In order to advance this study in the intermediate energy region, a variety of techniques are used. In this thesis, we present work done on two different analyses that use the principle of unitarity and the Bethe-Salpeter equation to study the resonances Lambda(1405), Sigma(1385), and a1(1260). Firstly, we perform a simultaneous analysis of Sand P-waves of the Strangeness = -1 two-body meson-baryon scattering amplitude using all low-energy data. For the first time, differential cross section data are included for chiral unitary coupled-channel models. From this model, S- and P-wave amplitudes are extracted and we observe both well-known I(JP)=0(1/2^-) S-wave states as well as a new I(JP)=1(1/2^+) state absent in quark models and lattice QCD results. Multiple statistical and phenomenological tests suggest that, while the data clearly require an I =1 P-wave resonance, the new state just accounts for the absence of the decuplet Sigma(1385)3/2+ in the model which is subsequently included in the parameterization. Secondly, we formulate the final state interaction of the a1(1260) resonance decay in a manifestly three-body-unitary parameterization and fit it to the a1(1260) lineshape measured by the ALEPH experiment. Dalitz plots calculated from this fit are presented. The work demonstrates the feasibility to numerically solve a previously derived amplitude and its generalization to isobars with spin and coupled channels. The model is a good test case because it can also be applied to other meson decays including exotic states and modified for the finite-volume problem as it arises in lattice QCD due to its manifest unitarity. The understanding of the resonances being analyzed in both the two-body work and the three-body work gives a better understanding of intermediate energy QCD.

Sadasivan, Daniel↗
DOE OSTI2024

Explainable AI classification for parton density theory

Quantitatively connecting properties of parton distribution functions (PDFs, or parton densities) to the theoretical assumptions made within the QCD analyses which produce them has been a longstanding problem in HEP phenomenology. To confront this challenge, we introduce an ML-based explainability framework, XAI4PDF, to classify PDFs by parton flavor or underlying theoretical model using ResNet-like neural networks (NNs). By leveraging the differentiable nature of ResNet models, this approach deploys guided backpropagation to dissect relevant features of fitted PDFs, identifying x-dependent signatures of PDFs important to the ML model classifications. By applying our framework, we are able to sort PDFs according to the analysis which produced them while constructing quantitative, human-readable maps locating the x regions most affected by the internal theory assumptions going into each analysis. This technique expands the toolkit available to PDF analysis and adjacent particle phenomenology while pointing to promising generalizations.

Artificial Intelligence↗
DOE OSTI2024

Designing a Dynamic Material via Interlocking Kraft Lignin with Ultrahigh Molecular Weight Poly(ethylene oxide)

The environmental issues stemming from plastic waste and the excessive use of petroleum-based chemicals are both concerning and urgent. To effectively address this problem, we need to adopt a comprehensive approach involving developing more sustainable and renewable materials. These materials should be capable of demonstrating similar or even better performance than functional polymers synthesized from petroleum-based chemicals. Our research aims to develop more sustainable materials by leveraging the intrinsic characteristics of a natural polymer, lignin, a byproduct of the biorefinery industries. We utilized the three-dimensional branching structure of lignin as a material framework. We employed an approach to co-reactive melt processing of kraft lignin with aliphatic flexible chains of soft cross-linkers through the reaction of the cross-linker epoxy chain ends with lignin functional groups. Our study demonstrates that the interlocked structure formed from the co-blending of kraft lignin with ultrahigh molecular weight poly(ethylene oxide) and the cross-linking of lignin chains through a solvent-free process can manipulate the macromolecular interactions and relaxation. This manipulation results in materials that exhibit a wide range of thermomechanical properties and self-healing and shape memory effects, with drastically improved stiffness in a single material. We have explored the fundamental understanding of the macromolecular chain relaxation dynamics originating from the interlocking structure formation. In conclusion, this investigation utilized various techniques, including thermal, mechanical, rheology, and quasi-elastic neutron scattering.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Sharp boundaries for the swampland

We reconsider the problem of bounding higher derivative couplings in consistent weakly coupled gravitational theories, starting from general assumptions about analyticity and Regge growth of the S-matrix. Higher derivative couplings are expected to be of order one in the units of the UV cutoff. Our approach justifies this expectation and allows to prove precise bounds on the order one coefficients. Our main tool are dispersive sum rules for the S-matrix. We overcome the difficulties presented by the graviton pole by measuring couplings at small impact parameter, rather than in the forward limit. We illustrate the method in theories containing a massless scalar coupled to gravity, and in theories with maximal supersymmetry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Enabling attractive-repulsive potentials in binary-collision-approximation monte-carlo codes for ion-surface interactions

Abstract Binary Collision Approximation (BCA) codes for ion-material interactions, such as SRIM, Tridyn, F-TRIDYN, and SDtrimSP, have historically been limited to screened Coulomb potentials even at low energies due to the difficulty in numerically solving the Distance of Closest Approach (DOCA) problem for attractive-repulsive potentials. Techniques such as direct n-body simulation or modifications to Newton’s method are either prohibitively costly or not guaranteed to work for all potentials. Advanced rootfinding techniques, such as companion matrix solvers, offer a solution. For many attractive-repulsive potentials, however, a companion matrix cannot be used directly, because there is no way to put the associated functions into a monomial basis form. A complementary technique is proxy rootfinding—by finding the best-fit polynomial approximant of a function, the zeros of the approximant can be guaranteed to be close to the zeros of the function. Using the Chebyshev basis and grid offers additional guarantees with regards to the quality of the approximation, the speed of convergence, and the avoidance of Runge’s phenomenon. By finding Chebyshev interpolants and using the Chebyshev-Frobenius companion matrix, the zeros of any real function on a bounded domain can be found. Here we show that using an Adaptive Chebyshev Proxy Rootfinder with Automatic Subdivision (ACPRAS) with appropriate scaling functions, numerical issues presented by attractive-repulsive potentials, including those of scale, can be handled. Using these techniques, we show that it is possible to include any physically reasonable interatomic potential in a BCA code, and to guarantee correctness of the resulting scattering angle calculations.

Materials Science↗
DOE OSTI2020

Multifrequency stimulated Raman scattering of light in a calcite single crystal

Using pulses of multifrequency stimulated Raman scattering (SRS) in calcite, nonlinear photoluminescence in a stilbene molecular crystal is excited. When multifrequency SRS is excited by the radiation of a Nd{sup 3+} : YAG laser with a wavelength of 1064 nm, eleven anti-Stokes components are observed in the visible spectrum with an average frequency shift of 1086 cm{sup −1} between them. Using the second harmonic of the Nd {sup 3+} : YAG laser radiation allowed three anti-Stokes and four Stokes components to be recorded. The large spectral range of the frequency comb facilitated effective reduction in the duration and increase in the intensity of the radiation pulse of multifrequency SRS. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

An ontology-based knowledge graph for representing interactions involving RNA molecules

The "RNA world" represents a novel frontier for the study of fundamental biological processes and human diseases and is paving the way for the development of new drugs tailored to each patient's biomolecular characteristics. Although scientific data about coding and non-coding RNA molecules are constantly produced and available from public repositories, they are scattered across different databases and a centralized, uniform, and semantically consistent representation of the "RNA world" is still lacking. We propose RNA-KG, a knowledge graph (KG) encompassing biological knowledge about RNAs gathered from more than 60 public databases, integrating functional relationships with genes, proteins, and chemicals and ontologically grounded biomedical concepts. To develop RNA-KG, we first identified, pre-processed, and characterized each data source; next, we built a meta-graph that provides an ontological description of the KG by representing all the bio-molecular entities and medical concepts of interest in this domain, as well as the types of interactions connecting them. Finally, we leveraged an instance-based semantically abstracted knowledge model to specify the ontological alignment according to which RNA-KG was generated. RNA-KG can be downloaded in different formats and also queried by a SPARQL endpoint. A thorough topological analysis of the resulting heterogeneous graph provides further insights into the characteristics of the "RNA world". RNA-KG can be both directly explored and visualized, and/or analyzed by applying computational methods to infer bio-medical knowledge from its heterogeneous nodes and edges. The resource can be easily updated with new experimental data, and specific views of the overall KG can be extracted according to the bio-medical problem to be studied.

59 BASIC BIOLOGICAL SCIENCES↗