Search NASA⌕ Search

SEARCH · Search NASA

Results for “Selection optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Operational performance risk assessment in support of a supervisory control system - 251

A supervisory control system is being developed for multiunit advanced small modular reactors to minimize human interventions during normal and abnormal operations. In the supervisory control system, control action decisions are made based on a probabilistic risk assessment that employs event trees and fault trees. Although traditional probabilistic risk assessment tools are implemented, their scope is extended to normal operations, and the application is reversed to assess the success of non-safety related systems and to enable continued operation of the plant. This extended probabilistic risk assessment approach is called operational performance risk assessment (OPRA). OPRA helps to identify available paths, combine control actions for maintaining plant conditions within operational limits, and to quantify the likelihood of success of these operational trajectories to optimize the selection of alternative actions without activating reactor protection system. In this paper, a case study of OPRA in a supervisory control system is demonstrated for the Advanced Liquid Metal Reactor (ALMR) Power Reactor Inherently Safe Module (PRISM) design, specifically the power conversion system. The scenario investigated involved a condition in which the feedwater control valve that was observed to be drifting to the closed position. Alternative plant configurations that would allow the plant to continue to operate at full or reduced power were identified using OPRA. Dynamic analyses were performed with a thermal-hydraulic model of the ALMR PRISM system using Modelica to evaluate the magnitude of safety margins. Successful recovery paths for the selected scenario were identified and quantified using the supervisory control system. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2024

Recycling Rare Earth Elements from End-of-Life Electric and Hybrid Electric Vehicle Motors

In this paper, we propose a superstructure-based approach to finding the optimal pathways for recovering rare earth elements in their commercialized rare earth oxide form from end-of-life EV and HEV motors. The proposed superstructure was modeled as a MILP optimization problem, selecting the net present value as the objective function. Whenever possible, costing data taken from the literature was used to inform this mode. However, due to the novelty of this research area data were often not available thus requiring the generation of flowsheets that were implemented in Aspen Plus.

Laliwala, Chris↗
DOE OSTI2024

Exploring gauge-fixing conditions with gradient-based optimization

Lattice gauge fixing is required to compute gauge-variant quantities, for example those used in RI-MOM renormalization schemes or as objects of comparison for model calculations. Recently, gauge-variant quantities have also been found to be more amenable to signal-to-noise optimization using contour deformations. These applications motivate systematic parameterization and exploration of gauge-fixing schemes. This work introduces a differentiable parameterization of gauge fixing which is broad enough to cover Landau gauge, Coulomb gauge, and maximal tree gauges. The adjoint state method allows gradient-based optimization to select gauge-fixing schemes that minimize an arbitrary target loss function.

Detmold, William↗
DOE OSTI2026

Dark Energy Survey Year 6 Results: MagLim++ Lens Sample Selection and Measurements of Galaxy Clustering

Galaxy clustering is a sensitive probe of the expansion history and growth of structure of the universe, and key degeneracies can be broken by combining these data with measurements of cosmic shear and galaxy-galaxy lensing (a so-called 3$\times$2pt analysis). The largest and least biased statistical samples of galaxies for use in clustering analyses can be collected photometrically through large imaging surveys. However, selecting clean photometric subsamples for cosmology are crucial for avoiding contamination that can bias cosmological constraints. Here we present the MagLim++ galaxy sample, selected to optimize for cosmological constraining power and incorporating an array of novel quality cuts to identify and remove residual contamination. This sample comes from the full six years of observations from the Dark Energy Survey. We present measurements of the two-point angular clustering ($w(θ)$) of 9,186,205 galaxies distributed over 4031 sq. degrees and in six tomographic redshift bins centered at $\bar{z}\approx$ [0.31, 0.44, 0.62, 0.78, 0.90, 1.01]. These measurements are used as part of the 3$\times$2pt and other DES Y6 legacy cosmological analyses in companion works. We describe the battery of null tests and mitigation schemes implemented to address observational, astrophysical, and methodological systematics in the analysis. The resulting $w(θ)$ measurements have a S/N = 149 (90.2 for linear scales only), which we use to place galaxy-clustering-only constraints on the matter density of the Universe, $Ω_m=0.311^{+0.023}_{-0.035}$, and amplitude of galaxy clustering in each redshift bin, $b_iσ_8=[1.16^{+0.04}_{-0.06},\ 1.40^{+0.04}_{-0.06},\ 1.57^{+0.04}_{-0.06},\ 1.59^{+0.04}_{-0.05},\ 1.50^{+0.04}_{-0.05},\ 1.74^{+0.06}_{-0.08}]$.

Weaverdyck, N. [BCCP, Berkeley; UC, Berkeley; LBL,↗
DOE OSTI2025

Contrasting Time-Frequency Representations for Unknown Waveform Detection

In real-world applications like spectrum management and interference detection, dealing with unseen electromagnetic waveforms is critical. Although some methods attempt to simulate open set data using generator models, they face challenges in generating synthetic samples for open set while simultaneously selecting an optimal discriminator for accurate classification. This results in difficulties capturing distinctive features across classes, especially in dynamic scenarios where new classes emerge. To detect unseen waveforms, we propose combining time and frequency domain features with cosine similarity loss to enhance feature distinctiveness and enabling more accurate predictions. This approach efficiently captures more comprehensive information than single-domain representations or approaches without cosine loss. Additionally, our model avoids generic feature vectors by extracting class-specific features during training, resulting in improved class representation. The experiment results show that this combined feature approach with cosine loss outperforms single-domain models and improves accuracy by 10\% over models without cosine loss.

99 - GENERAL AND MISCELLANEOUS↗
DOE OSTI2025

Contrasting Time-Frequency Representations for Unknown Waveform Detection

Identifying unseen electromagnetic waveforms is critical for many applications, like interference management, electronic warfare and spectrum management. Traditionally this is done using statistical methods for anomaly detection, which has evolved to deep learning models for identifying the unseen data, formally termed as open set recognition. Some prior methods use a generative model to emulate open set data, which face challenges in generating synthetic samples for open set while simultaneously selecting an optimal discriminator for accurate classification. To alleviate this issue, we propose a discriminative model that effectively combines time and frequency domain features of communication signals for accurate predictions. We further introduce a cosine similarity loss that makes the domain specific features unique to enhance the prediction rate. Additionally, our model avoids generic feature vectors by extracting class-specific features during training, resulting in improved class representation. The experiment results show that this combined feature approach with cosine loss outperforms single-domain models and improves accuracy by 10% over models without cosine loss.

99 - GENERAL AND MISCELLANEOUS↗
DOE OSTI2018

Target tracking via recursive Bayesian state estimation in cognitive radar networks

To cope with complicated environments and stealthier targets, incorporating intelligence and cognition cycles into target tracking is of great importance in modern sensor network management. With remarkable advances in sensor techniques and deployable platforms, a sensing system has freedom to select a subset of available radars, plan their trajectories, and transmit designed waveforms. In this paper, we propose a general framework for single target tracking in cognitive networks of radars, including consideration of waveform design, path planning, and radar selection, which are separately but not jointly taken into account in existing work. The tracking procedure, built on the theories of dynamic graphical models (DGM) and recursive Bayesian state estimation (RBSE), is formulated as two iterative steps: (i) solving a combinatorial optimization problem to select the optimal subset of radars, waveforms, and locations for the next tracking instant, and (ii) acquiring the recursive Bayesian state estimation to accurately track the target. Further, an illustrative example introduces a specific scenario in 2-D space. Simulation results based on the scenario demonstrate that the proposed framework can accurately track the target under the management of the network of radars.

47 OTHER INSTRUMENTATION↗
DOE OSTI2017

Selective recovery of silver from waste low-temperature co-fired ceramic and valorization through silver nanoparticle synthesis

Highlights: • Silver rich LTCC an e-waste has been recycled and valorized. • Selectively, Ag was leached and recovered as nanopowder. • The process can circulate the Ag within the industry in a close loop. • Brings back the material to production stream and address the circular economy. • Can be part of cradle-to-cradle technology and lower the futuristic carbon economy. - Abstract: Considering the value of silver metal and silver nanoparticles, the waste generated during manufacturing of low temperature co-fired ceramic (LTCC) were recycled through the simple yet cost effective process by chemical-metallurgy. Followed by leaching optimization, silver was selectively recovered through precipitation. The precipitated silver chloride was valorized though silver nanoparticle synthesis by a simple one-pot greener synthesis route. Through leaching-precipitation optimization, quantitative selective recovery of silver chloride was achieved, followed by homogeneous pure silver nanoparticle about 100 nm size were synthesized. The reported recycling process is a simple process, versatile, easy to implement, requires minimum facilities and no specialty chemicals, through which semiconductor manufacturing industry can treat the waste generated during manufacturing of LTCC and reutilize the valorized silver nanoparticles in manufacturing in a close loop process. Our reported process can address issues like; (i) waste disposal, as well as value-added silver recovery, (ii) brings back the material to production stream and address the circular economy, and (iii) can be part of lower the futuristic carbon economy and cradle-to-cradle technology management, simultaneously.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Selection of a Pair of Experiments to Optimally Reduce Uncertainty in Targeted Nuclear Data

We propose a novel process to select a pair of differential and integral experiments that best reduce uncertainties in targeted 239 ⁢Pu nuclear data while compressing the current nuclear data pipeline from 20 to 3 years. 239⁢ Pu nuclear data are poorly understood for neutrons in the intermediate energy range due to sparsity and uncertainty in historical experiments. New experiments targeting this range will enable better understanding of these nuclear data, but choosing the ideal experiments to conduct is challenging. Beginning with a prior distribution represented by samples of nuclear data generated from theory, generalized least squares adjustments are made to incorporate data from historical experiments. To quantify potential uncertainty reduction obtainable from a pair of candidate experiments, we compute the D-optimality criterion of the posterior covariance of intermediate energy range nuclear data compared to the equivalent covariance after additional adjustment to the pair of candidate experiments. Repeating the process for each of many candidate pairs facilitates the final selection. Results support 63⁢ Cu total cross section measurements for differential experiments and alumina and alumina/graphite configurations for integral experiments. This analysis enables choosing differential and integral experiments to be executed concurrently while shortening decision times relative to the current nuclear data pipeline.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2019

Achieving High Selectivity for Alkyne Hydrogenation at High Conversions with Compositionally Optimized PdAu Nanoparticle Catalysts in Raspberry Colloid-Templated SiO 2

Improving the selectivity for catalytic hydrogenation of alkynes is a key step in upgrading feedstocks for olefin polymerization. Herein, dilute Pd x Au 1-x alloy nanoparticles embedded in raspberry colloidtemplated silica (x = 0.02, 0.04, and 0.09) are demonstrated to be highly active and selective for the gas-phase hydrogenation of 1-hexyne, exhibiting higher selectivity than pure Pd at high conversion. The conversion of 1-hexyne remains high even for the very low amounts of Pd in Pd 0.02 Au 0.98 . These catalysts are highly resistant to sintering—addressing a long-standing challenge in the use of Au-based catalysts. Clear evidence is presented that the addition of the second hydrogen to the halfhydrogenated intermediate is the rate-limiting step, and that the stability of the half-hydrogenated intermediate of the alkyne is higher than the half-hydrogenated alkene which explains the high selectivity even at high conversions. Moreover, of the three compositions investigated, optimum selectivity and activity is observed for the nanoparticles containing 4% Pd. The apparent activation energy for production of 1-hexene from 1-hexyne is measured to be 38 kJ mol -1 for the Pd 0.04 Au 0.96 catalysts, which is ~14 kJ mol -1 lower than for pure Pd. The hydrogenation is completely, but reversibly, suppressed by adding CO to the reactant mixture, indicating that the Pd centers are the active sites for reaction. The method of templating used in preparation of the catalysts is highly customizable and versatile. As a result, this study demonstrates that the composition of the nanoparticles as defined by the dilution ratio of Pd in Au and by the method used to make the supported catalyst are important tunable parameters that can be used to optimize activity and selectivity of bimetallic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

An Intelligent System for Automatic Selection of DC-DC Converter Topology with Optimal Design

In this paper, we present an intelligent system that has the capabilities of automatically selecting topology classes and optimizing circuit parameters of DC-DC power converters for a given design specification. The system, Machine-Learning-enhanced Automated Circuit Configuration and Evaluation of Power Converters (ML-ACCEPT), uses a hybrid of machine learning technologies, decision tree inference, reinforcement learning and deep neural networks. The system gives high accurate recommendations of design topology classes and computationally efficient results in optimizing power efficiencies in power converter design.

Xue, Lincoln↗
DOE OSTI2019

High-Resolution Mass Spectrometry Quantification: Impact of Differences in Data Processing of Centroid and Continuum Data

High-resolution mass spectrometry (HRMS) in full scan mode acquires all ions present in the sample of interest offering a lot of qualitative information. This, in combination with the improved performance of the new generation HRMS systems, triggers more (bio) analysts to switch from triple quad MS systems to HRMS for quantitative analysis. Quantitative processing of HRMS data is performed based on narrow mass extraction windows rather than on nominal mass product ion chromatograms (SRM or MRM). Optimal processing of HRMS data requires different considerations and software tools and can have an impact on data processing and final results. The selection of centroid versus continuum/profile data for processing, selection of the optimal narrow mass extraction window, using theoretical versus measured accurate mass for the extraction of the ion chromatograms as well as differences in calculations and data handling residing in the different vendor software packages are tackled in the presented manuscript. These differences are illustrated on HRMS data acquired for the same plasma samples on three different platforms, i.e., a Sciex QToF, a Waters QToF, and a Thermo Orbitrap system, and processed in four different software packages, i.e., Sciex Analyst® TF, Waters Masslynx, Waters Unifi, and Thermo Xcalibur. The impact of these differences on quantitative HRMS performance was evaluated on calibration curves of eight small molecule compounds in plasma using four different ways of processing. Simple guidelines are provided for the selection of an optimal mass extraction window for continuum and centroided data. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Selecting Critical Scenarios of DER Adoption in Distribution Grids Using Bayesian Optimization

We develop a new methodology to select scenarios of DER adoption most critical for distribution grids. Anticipating risks of future voltage and line flow violations due to additional PV adopters is central for utility investment planning but continues to rely on deterministic or ad hoc scenario selection. We propose a highly efficient search framework based on multi-objective Bayesian Optimization. We treat underlying grid stress metrics as computationally expensive black-box functions, approximated via Gaussian Process surrogates and design an acquisition function based on probability of scenarios being Pareto-critical across a collection of line- and bus-based violation objectives. Our approach provides a statistical guarantee and offers an order of magnitude speed-up relative to a conservative exhaustive search. Case studies on realistic feeders with 200-400 buses demonstrate the effectiveness and accuracy of our approach.

Mulkin, Olivier↗
DOE OSTI2023

Stochastic optimization of a uranium oxide reaction mechanism using plasma flow reactor measurements

Abstract In this work, a coupled Monte Carlo Genetic Algorithm (MCGA) approach is used to optimize a gas phase uranium oxide reaction mechanism based on plasma flow reactor (PFR) measurements. The PFR produces a steady Ar plasma containing U, O, H, and N species with high temperature regions (3000–5000 K) relevant to observing UO formation via optical emission spectroscopy. A global kinetic treatment is used to model the chemical evolution in the PFR and to produce synthetic emission signals for direct comparison with experiments. The parameter space of a uranium oxide reaction mechanism is then explored via Monte Carlo sampling using objective functions to quantify the model-experiment agreement. The Monte Carlo results are subsequently refined using a genetic algorithm to obtain an experimentally corroborated set of reaction pathways and rate coefficients. Out of 12 reaction channels targeted for optimization, four channels are found to be well constrained across all optimization runs while another three channels are constrained in select cases. The optimized channels highlight the importance of the OH radical in oxidizing uranium in the PFR. This study comprises a first step toward producing a comprehensive experimentally validated reaction mechanism for gas phase uranium molecular species formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Machine Learning-Based Technique for Automated Sensor Characterization

The development of novel instrumentation requires an iterative cycle with three stages: design, prototyping, and testing. Recent advancements in simulation and nanofabrication techniques have significantly accelerated the design and prototyping phases. Nonetheless, detector characterization continues to be a major bottleneck in device development. During the testing phase, a significant time investment is required to characterize the device in different operating conditions and find optimal operating parameters. The total effort spent on characterization and parameter optimization can occupy a year or more of an expert s time. In this work, we present a novel technique for automated sensor calibration that aims to accelerate the testing stage of the development cycle. This technique leverages closed-loop Bayesian optimization (BO), using real-time measurements to guide parameter selection and identify optimal operating states. We demonstrate the method with a novel low-noise CCD, showing that the machine learning-driven tool can efficiently characterize and optimize operation of the sensor in a couple of days without supervision of a device expert.

Zepeda, Cuevas [Chicago U., KICP]↗
DOE OSTI2025

Automating Sensor Characterization with Bayesian Optimization

The development of novel instrumentation requires an iterative cycle with three stages: design, prototyping, and testing. Recent advancements in simulation and nanofabrication techniques have significantly accelerated the design and prototyping phases. Nonetheless, detector characterization continues to be a major bottleneck in device development. During the testing phase, a significant time investment is required to characterize the device in different operating conditions and find optimal operating parameters. The total effort spent on characterization and parameter optimization can occupy a year or more of an expert's time. In this work, we present a novel technique for automated sensor calibration that aims to accelerate the testing stage of the development cycle. This technique leverages closed-loop Bayesian optimization (BO), using real-time measurements to guide parameter selection and identify optimal operating states. We demonstrate the method with a novel low-noise CCD, showing that the machine learning-driven tool can efficiently characterize and optimize operation of the sensor in a couple of days without supervision of a device expert.

Cuevas-Zepeda, Julian [Chicago U., KICP; Chicago U↗
DOE OSTI2018

The MicroBooNE Search for Single Photon Events

This note describes and presents preliminary results for the MicroBooNE analysis being developed to search for neutrino-induced neutral current single photon events in the MicroBooNE detector. The analysis currently assumes neutrino neutral current Δ production followed by Δ radiative decay on argon (NC Δ → N γ) as the “signal model”; event reconstruction and selection have been developed and are being optimized in order to reduce cosmogenic and other beam-related backgrounds explicit to the NC Δ → N γ process. This note presents the current status of event reconstruction, selection, optimization and validation checks for the early stages of analysis on external (cosmogenic background) events. Also presented are the projected sensitivities for testing the standard model predicted rate for the NC Δ → N γ process and for testing the interpretation of the previously observed MiniBooNE low energy excess as NC Δ → N γ events.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Advanced fuels from ethanol – a superstructure optimization approach

We develop a superstructure framework for the design of biorefineries for ethanol upgrading into advanced biofuels to replace gasoline, jet fuel or diesel. The framework integrates catalysis, process synthesis, and fuel property modelling towards the design of biorefineries producing fuels with specified properties. The proposed framework is applied to identify strategies for the upgrading of ethanol into one or more fuels with specific properties. We discuss the trade-off between profit and biorefinery complexity, as well as the relation among fuel property constraints, the optimal upgrading strategy selected, and process economics. Lastly, we show how to find the optimal biorefinery associated with a particular chemistry or catalyst. The results presented constitute the first systematic study of ethanol upgrading considering, simultaneously, fuel and process design.

09 BIOMASS FUELS↗