Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sense Organs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

Desert Locust Cropland Damage Differentiated from Drought, with Multi-Source Remote Sensing in Ethiopia

In 2020, Ethiopia had the worst desert locust outbreak in 25 years, leading to food insecurity. Locust research has typically focused on predicting the paths and breeding grounds based on ground surveys and remote sensing of outbreak factors. In this study, we hypothesized that it is possible to detect desert locust cropland damage through the analysis of fine-scale (5–10 m) resolution satellite remote sensing datasets. We performed our analysis on 121 swarm point locations on croplands derived from the Food and Agriculture Organization (FAO) of the United Nations, and 94 ‘non-affected’ random cropland sample points generated for this study that are distributed within 20–25 km from the ‘center’ of swarm affected sample locations. Integrated Drought Condition Indices (IDCIs) and Vegetation Health Indices (VHIs) calculated for the affected sample locations for 2000–2020 were strongly correlated (R(exp 2) > 0.90) with that of the corresponding non-affected group of sample sites. Drought indices were strongly correlated with the evaluation Standardized Precipitation Evapotranspiration Indices (SPEIs) and showed that 2020 was the wettest year since 2000. In 2020, the NDVI and backscatter coefficient of cropland phenologies from the affected versus non-affected cropland sample sites showed a slightly wider, but significant gap in March (short growing season) and August-October (long growing season). Thus, slightly wider gaps in cropland phenologies between the affected and non-affected sites were likely induced from the locust damage, not drought, with fine scale data representing a larger gap.

Desert locust↗
DOE OSTI2023

Electrochemistry-Induced Direct Deposition of Nanoscale Thin Zeolitic Imidazolate Framework-8 Films on Insulator Substrates

Electrochemical approaches have been explored as controlled means to prepare thin films of metal–organic frameworks (MOFs) on electrodes but have rarely been used to form insulator films on insulator surfaces. Herein, we report an electrochemistry-based approach to direct deposition of a thin film of zeolitic imidazolate framework-8 (ZIF-8) onto an insulator surface. The film deposition was induced by a cathodic reaction at an electrode that was placed above the insulator with a separation of ≈100 μm in a methanol solution containing ZnCl 2 and 2-methylimidizole. The effects of the electrode and insulator material, applied potential, electrode–substrate distance, deposition time, and the number of deposition cycles were systematically investigated to gain insight into the deposition mechanism. The results of these measurements were consistent with a hypothesized mechanism involving cathodic base generation at the working electrode for ligand deprotonation, formation of intermediate species, their diffusion toward the substrate, and the formation of ZIF-8 on the substrate. Interestingly, the size, shape, and position of the film on the substrate replicated those of the working electrode, showing the applicability of this approach to the patterned deposition of a ZIF-8 film. In addition, film thickness could be easily controlled in the range of tens to hundreds of nanometers by adjusting the potential application conditions. Furthermore, this electrochemistry-induced method will provide a simple means for the patterned formation of a MOF film of controlled thickness on an insulator without metal precoating and thus will open the possibility of designing unique devices for various applications including chemical sensing and separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Computational quantum chemistry of metal–organic frameworks

Metal–organic frameworks (MOFs) have premium exceptional properties for a variety of functions, such as gas separation and storage and catalysis. The large variety of possible inorganometallic nodes and organic linkers provide an almost unlimited number of combinations for assembling MOFs, which makes the experimental characterization and examination of all potentially useful combinations practically impossible. Furthermore, experimental studies of MOFs typically fall short in uncovering crucial details regarding their mechanisms of action or the molecular details responsible for their functional properties, such as the nature of adsorbate binding or the structures of transition states. Computational modeling has, therefore, become an efficient and important tool for strategizing the functionalization of MOFs and explicating the mechanisms of their functions. Furthermore, we review the computational methodologies used for computational studies of MOFs, especially Kohn–Sham density functional theory and combined quantum mechanical and molecular mechanical methods for calculating their structural, electronic, and magnetic properties, as well as for understanding the mechanisms of MOFs' applications to magetic devices, thermal conduction, gas adsorption, separation, storage, and sensing, thermal catalysis, photocatalysis, and electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Revealing the Chemical State of Palladium in Operating In 2 O 3 Gas Sensors: Metallic Pd Enhances Sensing Response and Intermetallic In x Pd y Compound Blocks It

The sensing response of metal oxides activated with noble metal nanoparticles is significantly influenced by changes to the chemical state of corresponding elements under operating conditions. Here, a PdO/rh-In 2 O3 consisting of PdO nanoparticles loaded onto rhombohedral In 2 O 3 was studied as a gas sensor for H 2 gas (100–40000 ppm in an oxygen-free atmosphere) in the temperature range of 25–450 °C. The phase composition and chemical state of elements were examined by resistance measurements combined with synchrotron-based in situ X-ray diffraction and ex situ X-ray photoelectron spectroscopy. As found, PdO/rh-In 2 O 3 undergoes a series of structural and chemical transformations during operation: from PdO to Pd/PdH x and finally to the intermetallic In x Pd y phase. The maximal sensing response (R N2 /R H2 ) of ~5 · 10 7 towards 40000 ppm (4 vol %) H 2 at 70 °C is correlated with the formation of PdH 0.706 /Pd. The In x Pd y intermetallic compounds formed around 250 °C significantly decrease the sensing response.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Trap-Filling Magnetoconductance as an Initialization and Readout Mechanism of Triplet Exciton Spins

Photoexcited triplet states are promising candidates for hybrid qubit systems, as they can be used as a controlling gate for nuclear spins. But microwave readout schemes do not generally offer the sensitivity needed to approach the single-molecule limit or the scope to integrate such systems into devices. In this report we demonstrate the possibility of electrical readout of triplet spins at room temperature through a specific mechanism of magnetoconductance (MC) in polycrystalline pentacene. We show that hole-only pentacene devices exhibit a positive photoinduced MC response that is consistent with a trap-filling mechanism. Spin and magnetic-field-dependent quenching of photogenerated triplets by holes quantitatively explains the MC response we observe. These results are distinct in both sign and proposed mechanism compared to previous reports on polyacene materials and provide clear design rules for future spintronic devices based on this spin-sensing mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2026

The Contaminant Footprint of Landed Spacecraft: Toward an Inventory and Modelling Framework

All spacecraft generate and carry contaminants, i.e., unwanted and potentially harmful material. When a spacecraft lands and operates in near-vacuum, as onto Earth’s Moon, it introduces contaminants into its environment that may compromise mission science objectives and engineering performance. Contamination of solar system bodies may irrevocably degrade targets of unique value to planetary scientists, for instance, as lunar landed spacecraft introduce propellant effluents into the otherwise pristine ice of the Moon’s permanently shadowed regions. NASA’s planetary protection discipline seeks to ensure that solar system bodies are not contaminated, for scientific purposes, by terrestrial material (i.e., forward contamination). This interest aligns with planetary science interest in mitigating the transport of terrestrial contaminants onto solar system bodies and in controlling types of contamination that could compromise the scientific value of samples or measurements. NASA, and other entities that practice planetary science, have compelling and multidisciplinary interests in the preservation of special regions and sampling sites of high scientific value – including lunar permanently shadowed regions (PSRs) – from inadvertent contamination by any spacecraft, and in understanding the contamination of such regions by all spacecraft. Organic molecular contamination here represents a primary threat. Organic molecules will be introduced to solar system bodies by nominal landed spacecraft and crew processes – including by the action of descent and ascent engines; natural materials outgassing; and crew environmental and life support system sources. Molecular contaminants can also travel in the free-molecular sense at global scale across near-vacuum bodies, including into regions where they may be permanently trapped. This presentation will address a high-level study to identify sources of contaminants – in particular, organic material – generated by landed spacecraft along with the transport vectors by which these contaminants can reach sites of scientific interest on bodies like the Moon. A vision for an integrated modeling framework for the organic contamination footprint of spacecraft missions, individually and collectively, will also be described and presented along with initial conclusions related to organic molecular transport.

Gas Dynamics↗
NASA NTRS2015

Evolution of Archival Storage (from Tape to Memory)

Over the last three decades, there has been a significant evolution in storage technologies supporting archival of remote sensing data. This section provides a brief survey of how these technologies have evolved. Three main technologies are considered - tape, hard disk and solid state disk. Their historical evolution is traced, summarizing how reductions in cost have helped being able to store larger volumes of data on faster media. The cost per GB of media is only one of the considerations in determining the best approach to archival storage. Active archives generally require faster response to user requests for data than permanent archives. The archive costs have to consider facilities and other capital costs, operations costs, software licenses, utilities costs, etc. For meeting requirements in any organization, typically a mix of technologies is needed.

Magnetic Storage; Technology Evolution↗
NASA NTRS2001

Shaping NASA's Earth Science Enterprise Workforce Development Initiative to Address Industry Needs

It has been well recognized that the commercial remote sensing industry will expand in new directions, resulting in new applications, thus requiring a larger, more skilled workforce to fill the new positions. In preparation for this change, NASA has initiated a Remote Sensing Professional Development Program to address the workforce needs of this emerging industry by partnering with the private sector, academia, relevant professional societies, and other R&D organizations. Workforce needs will in part include understanding current industry concerns, personnel competencies, current and future skills, growth rates, geographical distributions, certifications, and sources of pre-service and in-service personnel. Dave Rosage of the NASA Goddard Space Flight Center and a panel of MAPPS members will lead a discussion to help NASA specifically address private firms' near and long-term personnel needs to be included in NASA's Remote Sensing Professional Development Program. In addition, Dave Rosage will present perspectives on how remote sensing technologies are evolving, new NASA instruments being developed, and what future workforce skills are expected to support these new developments.

Rosage, David↗
NASA NTRS2019

Approach for Propagating Radiometric Data Uncertainties Through NASA Ocean Color Algorithms

Spectroradiometric satellite observations of the ocean are commonly referred to as “ocean color” remote sensing. NASA has continuously collected, processed, and distributed ocean color datasets since the launch of the Sea-viewing Wide-field-of-view Sensor (SeaWiFS) in 1997. While numerous ocean color algorithms have been developed in the past two decades that derive geophysical data products from sensor-observed radiometry, few papers have clearly demonstrated how to estimate measurement uncertainty in derived data products. As the uptake of ocean color data products continues to grow with the launch of new and advanced sensors, it is critical that pixel-by-pixel data product uncertainties are estimated during routine data processing. Knowledge of uncertainties can be used when studying long-term climate records, or to assist in the development and performance appraisal of bio-optical algorithms. In this method paper we provide a comprehensive overview of how to formulate first-order first-moment (FOFM) calculus for propagating radiometric uncertainties through a selection of bio-optical models. We demonstrate FOFM uncertainty formulations for the following NASA ocean color data products: chlorophyll-a pigment concentration (Chl), the diffuse attenuation coefficient at 490 nm (K(sub d,490)), particulate organic carbon (POC), normalized fluorescent line height (nflh), and inherent optical properties (IOPs). Using a quality-controlled in situ hyperspectral remote sensing reflectance (R(sub rs,i)) dataset, we show how computationally inexpensive, yet algebraically complex, FOFM calculations may be evaluated for correctness using the more computationally expensive Monte Carlo approach. We compare bio-optical product uncertainties derived using our test R(sub rs) dataset assuming spectrally-flat, uncorrelated relative uncertainties of 1, 5, and 10%. We also consider spectrally dependent, uncorrelated relative uncertainties in R(sub rs). The importance of considering spectral covariances in R(sub rs), where practicable, in the FOFM methodology is highlighted with an example SeaWiFS image. We also present a brief case study of two POC algorithms to illustrate how FOFM formulations may be used to construct measurement uncertainty budgets for ecologically-relevant data products. Such knowledge, even if rudimentary, may provide useful information to end-users when selecting data products or when developing their own algorithms.

Bio-optics↗
NASA NTRS1999

Mars Solar Balloon Landed Gas Chromatograph Mass Spectrometer

A Mars surface lander Gas Chromatograph Mass Spectrometer (GCMS) is described to measure the chemical composition of abundant and trace volatile species and isotope ratios for noble gases and other elements. These measurements are relevant to the study of atmospheric evolution and past climatic conditions. A Micromission plan is under study where a surface package including a miniaturized GCMS would be delivered to the surface by a solar heated hot air balloon based system. The balloon system would be deployed about 8 km above the surface of Mars, wherein it would rapidly fill with Martian atmosphere and be heated quickly by the sun. The combined buoyancy and parachuting effects of the solar balloon result in a surface package impact of about 5 m/sec. After delivery of the package to the surface, the balloon would ascend to about 4 km altitude, with imaging and magnetometry data being taken for the remainder of the daylight hours as the balloon is blown with the Martian winds. Total atmospheric entry mass of this mission is estimated to be approximately 50 kg, and it can fit as an Ariane 5 piggyback payload. The GCMS would obtain samples directly from the atmosphere at the surface and also from gases evolved from solid phase material collected from well below the surface with a Sample Acquisition and Transport Mechanism (SATM). The experiment envisioned in the Mars Micromission described would obtain samples from a much greater depth of up to one meter below the surface, and would search for organic molecules trapped in ancient stratified layers well below the oxidized surface. Insitu instruments on upcoming NASA missions working in concert with remote sensing measurement techniques have the potential to provide a more detailed investigation of mineralogy and the extent of simple volatiles such as CO2 and H2O in surface and subsurface solid phase materials. Within the context of subsequent mission opportunities such as those provided by the Ariane 5 piggyback payload based Micromissions, it is essential to implement an even broader chemical analysis and to enable a significant extension of previous isotope measurements. Such a development would enhance the presently very active study of questions of atmospheric evolution and loss and past climatic conditions. The method selected to implement this program can be based on well-established mass spectrometry techniques. Sampled gas is chemically and physically processed to separate the gas mixture into components using gas chromatograph and related enrichment techniques. This allows trace species to be identified and reveals isotopic distributions in many cases with improved precision. Samples of interest, such as organic molecules, may lie deep below the highly oxidized surface layer and the suggested program includes enhanced sampling techniques to measure volatiles preserved in solid phase material deep below the surface as well as gas from the well mixed atmosphere.

Mahaffy, P.↗
DOE OSTI2022

Luminescent MOFs (LMOFs): recent advancement towards a greener WLED technology

The replacement of traditional incandescent, halogen and fluorescent lamps by white light emitting diodes (WLEDs) is expected to reduce the global electricity consumption by one-third by 2030, according to the US Department of Energy. The current WLED technology uses rare-earth element (REE) based phosphor materials, which, not only is cost-intensive but also constitutes an environmental concern. Hence, researchers are in a quest for a new-generation of opto-electronic materials that can replace the conventional phosphors in WLEDs and thus aim towards a cleaner and more energy efficient lighting technology for the future. Luminescent metal–organic frameworks (LMOFs) have recently emerged as a new sub-class of MOFs which have demonstrated enormous potential for applications in sensing, imaging, optoelectronics and in solid-state lighting (SSL) technology. LMOFs could be game changers as lighting phosphors due to advantages such as high luminescence quantum yield, tunable excitation and emission which can be achieved by rational design and optimization of metal centers, linkers, and the guest molecules, facile fabrication into devices, and structural robustness. These clear advantageous features of LMOFs make them score over other contemporary materials, and enable them to be futuristic phosphor materials for WLED technology. Here, in this feature article, we will provide an overview of the most recent developments of LMOF-based phosphor materials for SSL with a special focus on WLED technology. The emphasis will be centered around REE-free LMOFs, as the aim is to direct the attention of the readers towards a more viable and greener lighting technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Taste Perception of Branched Maltooligosaccharides

Oral processing of starch generates linear and branched maltooligosaccharides (MOS). This study investigates the impact of branching and the degree of polymerization (DP) on MOS taste detection. Three branched MOS samples (A−C) were enzymatically prepared from gelatinized waxy corn starch and characterized using reducing-end assays, MALDI-TOF MS, β-amylase hydrolysis, and GC-MS linkage analysis. Samples A, B, and C had average DPs of 6, 10, and 18, respectively, with α-1,6 branch points comprising 9−13% of glycosidic bonds; linear MOS were negligible. In triangle tests, participants evaluated MOS samples and a maltose control at 75 mM, with and without lactisole, a sweet receptor inhibitor. All samples were detectable without lactisole (d′ = 1.81−2.9; p < 0.05), but not with lactisole (d′ = 0−0.61; p > 0.05). These findings demonstrate that α-1,6 branching enables MOS detection via the sweet receptor, not the putative “starchy” receptor, underscoring the importance of glycosidic structure in carbohydrate taste perception.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Facile Measurement of the Rotation of a Single Optically Trapped Nanoparticle Using the Diagonal Ratio of a Quadrant Photodiode

Optical tweezers are a powerful tool for exploring physical properties of particles in various environments through analysis of their dynamics in a trapping potential. Analysis of the trapped particle's position is often done using interferometric back-focal-plane detection microscopy in which interference between the trapping laser and the light interacting with the trapped particle is projected on a quadrant photo-diode (QPD). The QPD measurements are almost universally the voltage ratios between the transverse components of the detector (left/right; up/down) that are calibrated to ascertain particle positions and orientations (i.e., rotation). In this paper, we demonstrate how measuring the diagonal ratio of the QPD allows tracking the spinning and orbital motion of optically trapped objects with enhanced sensitivity compared to the conventional transverse ratio and reveals additional information about particle dynamics. The diagonal ratio "balances" the signal from opposite sides of the QPD, allowing common mode noise reduction and increased measurement sensitivity of the rotating nanospheres at frequencies from below 200 Hz to above 15 kHz. We show that the variability in particle rotation rates is due to slight differences in the aspect ratio of the nanoparticles. We also measure in situ a gradual acceleration in the spinning frequency of trapped nanoparticles due to photothermal shedding of surface ligands and the resulting decrease of rotational friction in solution. The accelerating particles spin at rates exceeding 30 kHz and are eventually "optically printed" onto the glass coverslip on top of the liquid cell enclosure. The diagonal ratio is a simple, readily available, and powerful enabler for measuring rotational dynamics with a 5-fold sensitivity increase over conventional QPD measurements. This affords opportunities for controlling the orientational dynamics of trapped nanoparticles, which is crucial for various applications, including nanoscale mechanical motors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Real-Time Ammonia and Humidity Monitoring with Ultra-Fast Conductometric Sensors Based on Porphyrin and Phthalocyanine Complexes

Organic semiconductors like porphyrins and phthalocyanines are attracting a wide range of researchers due to their versatile electrical properties and sensing performances in conductometric sensors. In this study, we investigate two types of π-extended porphyrins, which share the same macrocyclic structure but differ in their central metal. These porphyrins are employed as sublayers in bilayer heterojunction devices, with the lutetium bisphthalocyanine complex, LuPc 2 , serving as the common top layer. Remarkably, the central metal in the porphyrin macrocycle significantly influences the solubility of the materials and, consequently, the surface topography of the resulting bilayer heterojunction devices. This structural variation translates into distinct electrical and sensing performances. The device incorporating nickel as metal centre (AM2) demonstrates superior sensitivity towards NH3, with a relative response (RR) of ca. -7% at 90 ppm, an ultra-fast response time of about 9 s, and an impressive limit of detection (LOD) of 250 ppb, whereas, the device that has zinc as metal centre in sublayer (AM3) exhibits RR value of ca. -0.9% at 90 ppm with t 90 of ca. 120 s and LOD of 2 ppm. Both devices are evaluated under randomly varying NH 3 concentration and RH value. The results shows that the AM2-based sensor allows following NH 3 in real-time, while the AM3-based sensor delivers an average concentration over time. On the other hand, the AM2-based sensor exhibits slow kinetics under RH exposure, while the AM3-based sensor precisely mirrors the pattern of random RH changes generated by the software, demonstrating its exceptional responsiveness and accuracy in tracking humidity fluctuations. In conclusion, these findings underscore the critical role of the metal centre in tuning the electrical and sensing properties of the heterojunction devices.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

[2 + 2] Cycloaddition Produces Divalent Organic Color-Centers with Reduced Heterogeneity in Single-Walled Carbon Nanotubes

Organic color centers (OCCs), generated by the covalent functionalization of single-walled carbon nanotubes, have been exploited for chemical sensing, bioimaging, and quantum technologies. However, monovalent OCCs can assume at least 6 different bonding configurations on the sp 2 carbon lattice of a chiral nanotube, resulting in heterogeneous OCC photoluminescence emissions. Herein, we show that a heat-activated [2 + 2] cycloaddition reaction enables the synthesis of divalent OCCs with a reduced number of atomic bonding configurations. The chemistry occurs by simply mixing enophile molecules (e.g., methylmaleimide, maleic anhydride, and 4-cyclopentene-1,3-dione) with an ethylene glycol suspension of SWCNTs at elevated temperature (70–140 °C). Unlike monovalent OCC chemistries, we observe just three OCC emission peaks that can be assigned to the three possible bonding configurations of the divalent OCCs based on density functional theory calculations. Notably, these OCC photoluminescence peaks can be controlled by temperature to decrease the emission heterogeneity even further. Furthermore, this divalent chemistry provides a scalable way to synthesize OCCs with tightly controlled emissions for emerging applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Elucidating Quintet-State Dynamics in Singlet Fission Oligomers and Polymers with Tetracene Pendants

To unlock the potential of molecular engineering for practical quantum sensing and computing, it is essential to create and control pure magnetic states in molecular systems. Singlet fission (SF) in organic materials offers a promising approach by generating pairs of triplet excited states from photoexcited singlets. Here, in this work, we investigate SF in a polymer with strategically positioned tetracene pendant groups along a polynorbornene backbone and its oligomeric counterparts, facilitating intrapolymer through-space coupling. Using continuous-wave and pulsed time-resolved electron paramagnetic resonance (EPR) spectroscopy, we elucidate the spin dynamics and identify key intermediates, including the quintet state, that emerge during SF. Our findings reveal that exciton translational motion along the pendant groups enhances the dissociation of triplet pairs, with oligomer length playing a critical role in modulating spin state interconversion and exciton transport. Our results provide key insights into the SF mechanism in polymeric materials and highlight the role of oligomer length in modulating spin state interconversion and exciton transport. This work advances our understanding of SF in polymers, paving the way for their application in quantum information science and energy conversion technologies.

Bindra, Jasleen K. [Argonne National Laboratory (A↗
DOE OSTI2026

Deactivating Emission in Azulene via Solvent-Induced (Anti)Aromaticity

Anti-Kasha emission is a coveted feature in optoelectronics, with promise in areas such as imaging, sensing, and the production of white-light LEDs via dual-photon emission. Despite being a rare feature in organic systems, anti-Kasha emission is readily observed in the deceptively simple molecule azulene, which possesses two bright singlet states in the UV–visible spectrum and readily emits from the S 2 state. With dominant anti-Kasha emission and decades of synthetic study, azulene is a perfect candidate for novel material fabrication; however, large gaps persist in understanding the photophysics of even the simple parent compound. These range from competing, experimentally unverified models of azulene reactivity and aromaticity to the unexplained deactivation of anti-Kasha emission in a host of azulene derivatives. Herein, we use fluorescence and transient absorption spectroscopies to explore the detailed solvent dependence of azulene photophysics. We discover a tunable reduction in the S 2 lifetime via weak complexation with aromatic solvents. Interestingly, our results are independent of polarity, highlighting the primacy of peripherally delocalized 10-π Hückel aromaticity over zwitterionic character. When the dipolar character is enhanced through chemical functionalization, we observe even greater sensitivity to solvent aromaticity and more rapid quenching, revealing the role of conical intersections in azulenes with zwitterionic excited states. Overall, this work provides essential mechanistic insight into the photophysics of azulene and reveals a simple new approach to control the excited-state aromaticity and anti-Kasha emission in this class of materials.

Absorption↗
DOE OSTI2022

Mechanism of the cadherin–catenin F-actin catch bond interaction

Mechanotransduction at cell–cell adhesions is crucial for the structural integrity, organization, and morphogenesis of epithelia. At cell–cell junctions, ternary E-cadherin/β-catenin/αE-catenin complexes sense and transmit mechanical load by binding to F-actin. The interaction with F-actin, described as a two-state catch bond, is weak in solution but is strengthened by applied force due to force-dependent transitions between weak and strong actin-binding states. Here, we provide direct evidence from optical trapping experiments that the catch bond property principally resides in the αE-catenin actin-binding domain (ABD). Consistent with our previously proposed model, the deletion of the first helix of the five-helix ABD bundle enables stable interactions with F-actin under minimal load that are well described by a single-state slip bond, even when αE-catenin is complexed with β-catenin and E-cadherin. Our data argue for a conserved catch bond mechanism for adhesion proteins with structurally similar ABDs. We also demonstrate that a stably bound ABD strengthens load-dependent binding interactions between a neighboring complex and F-actin, but the presence of the other αE-catenin domains weakens this effect. These results provide mechanistic insight to the cooperative binding of the cadherin–catenin complex to F-actin, which regulate dynamic cytoskeletal linkages in epithelial tissues.

59 BASIC BIOLOGICAL SCIENCES↗