Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar coronal heating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Preflare characteristics of active regions observed in soft X-rays

X-ray images from the AS&E telescope on Skylab are used to investigate coronal conditions in solar active regions during the 20-min periods preceding the X-ray onsets of small flares. The preflare or precursor phase is defined as a phase with a characteristic length or time scale significantly different from that of the rise phase. We show that there is no observational evidence of a requirement for a coronal preflare heating phase with a time scale longer than 2 min for small flares characterized by one or two loops. In 18 out of 25 cases the flaring X-ray structure was not the brightest feature in the preflare active region. The electron densities are estimated for preflare loops.

Kahler, S. W.↗

Numerical studies of the energy balance in coronal loops

A numerical method is applied to treat the energy balance of quasi-static solar coronal loops, which have been observed to persist for periods much greater than the radiative cooling time. The quasi-static loop model employed takes into account gravity, density-, temperature- or position-dependent energy input, an accurate form of the radiative losses and variable loop cross-sectional area, under assumptions of energy input by coronal heating balanced by radiative and conductive losses, an optically thin plasma, energy conduction along the field lines only and hydrostatic equilibrium. Computations of an emission measure function for various distributions of the energy input and loop geometries are then presented which show that little information on the location of the energy input may be gained from spectral line intensity measurements integrated over a single loop.

Underwood, J. H.↗

The energetics of the gradual phase

Reseachers compare results with those in the chapter by Moore et al. (1980), who reached five main conclusions about the gradual phase: (1) the typical density of the soft X-ray emitting plasma is between 10 to the 11th power and 10 to the 12th power cm-3 for compact flares and between 10 to the 10th power and 10 to the 11th power cm-3 for a large-area flare; (2) cooling is by conduction and radiation in roughly equal proportions; (3) continual heating is needed in the decay phase of two-ribbon flares; (4) continual heating is probably not needed in compact events; (5) most of the soft-X-ray-emitting plasma results from chromospheric evaporation. The goal was to reexamine these problems with the data from the Solar Maximum Mission (SMM) and other supporting instruments as well as to take advantage of recent theoretical advances. SMM is capable of measuring coronal temperatures more accurately and with a better cadence than has been possible before. The SMM data set is also unique in that the complete transit of an active region was observed, with soft X-ray and UV images being taken every few minutes. Researcher's were therefore able to establish the pre-flare conditions of the region and see whether anything has changed as a result of the flare. The assumptions made in attempting to determine the required plasma parameters are described. The derived parameters for the five prime flares are presented, and the role of numerical simulations is discussed.

Strong, K. T.↗

Non-Maxwellian electron distributions in models of the solar atmosphere

In this paper, the solar models of Fontenla et al. (1990) are extended to coronal temperatures using optically thin radiative losses and a semicircular loop geometry. The effects of a non-Maxwellian high-energy tail of the electron distribution function is tested by performing a Fokker-Planck calculation of the tail. The results show that the downward conductive heat flux is very clsoe to that given by Braginskii (1965) for small departures from a Maxwellian distribution. The effects of the high-energy tail of the electron distribution on element ionization are computed and found to be negligible for all ionization states of O, Ne, and Si. It is concluded that, for quiet sun loop models in stationary energy balance, the ionization state of all elements is not significantly affected by the non-Maxwellian tail of the electron velocity distribution, and that the heat flux can be computed by considering only small first-order departures from the Maxwellian distribution.

Macneice, P.↗

Rendering Three-Dimensional Solar Coronal Structures of Active Region 8227

Coronal X-ray and EUV synthesized images are constructed of Active Region 8227 (May-June 1996) and are compared with Yohkoh/SXT, SOHO/EIT, and TRACE observations. Using the rendering technique of Gary (1997) and Alexander, Gary, and Thompson (1998), specific geometric and physical models are used to integrated the plasma emission along the line of sight to obtain a rendered image. The specific instrumental profiles are convolved in the integration process as well as specific heating functions. We analyze coronal X-ray and EUV structures by constructing synthesized image and comparison with observations provide test of specific physical models. We investigate how different pressure distributions within the active region loop system affect the emission characteristics and compare the various results with coronal observations. We investigate how the different heating functions in the active region are reflected in the effect of overall structure of the region. Specific heating rates are tested.

Gary, G. A.↗

Structure and Dynamics of Coronal Plasmas

During the past year this grant has funded research in the interaction between magnetic fields and the hot plasma in the solar outer atmosphere. The following is a brief summary of the published papers, abstracts and talks which have been supported. The paper 'Coronal Structures Observed in X-rays and H-alpha Structures' was published in the Kofu Symposium proceedings. The study analyzes cool and hot behavior of two x-ray events, a small flare and a surge. We find that a large H-alpha surge appears in x-rays as a very weak event, while a weak H-alpha feature corresponds to the brightest x-ray emission on the disk at the time of the observation. Calculations of the heating necessary to produce these signatures, and implications for the driving and heating mechanisms of flares vs. surges are presented. A copy of the paper is appended to this report. The paper 'Differential Magnetic Field Shear in an Active Region' has been published in The Astrophysical Journal. We have compared the 3D extrapolation of magnetic fields with the observed coronal structure in an active region. Based on the fit between observed coronal structure throughout the volume of the region and the calculated magnetic field configurations, we propose a differential magnetic field shear model for this active region. The decreasing field shear in the outer portions of the AR may indicate a continual relaxation of the magnetic field with time, corresponding to a net transport of helicity outward. The paper 'Difficulties in Observing Coronal Structure' has been accepted for publication in the journal Solar Physics. In this paper we discuss the evidence that the temperature and density structure of the corona are far more complicated than had previously been thought. The discussion is based on five studies carried out by our group on coronal plasma properties, showing that any one x-ray instrument does see all of the plasma present in the corona, that hot and cool material may appear to be co-spatial at a given location in the corona, and that simple magnetic field extrapolations provide only a poor fit to the observed structure. A copy of the paper is appended to this report.

Golub, Leon↗

Physical conditions in the solar corona during flarelike events

Soft X-ray images of the sun obtained with the S-056 telescope aboard Skylab are used to investigate physical conditions in the X-ray-emitting coronal plasma during flarelike events. Temporal and spatial variations in the density and temperature of the main X-ray source during a flare are determined along with the total radiative energy emitted by an observed loop system. Models for heat sources and energy balance are analyzed, radiative as well as conductive energy losses are computed, and an attempt is made to develop a self-consistent model of the observed X-ray event. It is concluded that: (1) loop tips constitute the source of the maximum X-ray flux; (2) conductive losses exceed radiative losses by several orders of magnitude; (3) energy (and possibly new matter) is added at loop tips; and (4) the most intense X-ray structures are located in areas where the magnetic field has a small radius of curvature and the axis of a loop sequence changes direction.

Vorpahl, J. A.↗

Particle acceleration

Data is compiled from Solar Maximum Mission and Hinothori satellites, particle detectors in several satellites, ground based instruments, and balloon flights in order to answer fundamental questions relating to: (1) the requirements for the coronal magnetic field structure in the vicinity of the energization source; (2) the height (above the photosphere) of the energization source; (3) the time of energization; (4) transistion between coronal heating and flares; (5) evidence for purely thermal, purely nonthermal and hybrid type flares; (6) the time characteristics of the energization source; (7) whether every flare accelerates protons; (8) the location of the interaction site of the ions and relativistic electrons; (9) the energy spectra for ions and relativistic electrons; (10) the relationship between particles at the Sun and interplanetary space; (11) evidence for more than one acceleration mechanism; (12) whether there is single mechanism that will accelerate particles to all energies and also heat the plasma; and (13) how fast the existing mechanisms accelerate electrons up to several MeV and ions to 1 GeV.

Vlahos, L.↗

Prominence formation in a coronal loop

A model is presented which depends on the preferential deposition of heating in the legs of a coronal loop and which produces a stable prominence-scale condensation at the loop top. Dynamic stability is attained by the subsequent adjustment of local parallel gravity by a magnetic inversion at the loop (or arcade) apex. A nonlinear numerical simulation of this process, which includes a deep chromosphere, a heating rate with a fixed dissipation length, and full solar gravity is described.

Mok, Y.↗

Microflares observed with UVSP and HXIS

A review of an analysis of SMM (Solar Maximum Mission) microflare observations is presented. The data, from the UVSP (Ultraviolet Spectrometer and Polarimeter) and HXIS (Hard X-ray Imaging Spectrometer) instruments, show that there are counterparts to UV microflares in x-ray emission characteristic of 10(exp 7) K plasma. Implications of the x-ray/UV relationship for flare distribution functions and coronal heating are discussed, and examples of similar events in SMM quiet Sun data are shown.

Porter, Jason G.↗

Modeling a Full Coronal Loop Observed with Hinode EIS and SDO AIA

Physical parameters measured from an observation of a coronal loop from Gupta et al. (2015) using Hinode/EIS and SDO/AIA were used as input for the hydrodynamic, impulsively heating NRLSOFM 1-­d loop model. The model was run at eight different energy inputs and used the measured quantities of temperature (0.73 MK), density (10(sup 8.5)cm(sup -3) and minimum loop lifetime to evaluate the success of the model at recreating the observations. The loop was measured by us to have an unprojected length of 236 Mm and was assumed to be almost perpendicular to the solar surface (tilt of 3.5 degrees) and have a dipolar geometry. Our results show that two of our simulation runs (with input energies of 0.01 and 0.02 ergs cm(sup -3)S(sup -1) closely match the temperature/density combination exhibited by the loop observation. However, our simulated loops only remain in the temperature sensitive region of the Mg 278.4 Angstrom filter for 500 and 800 seconds respectively which is less than the 1200 seconds that the loop is observed for with EIS in order to make the temperature/density measurements over the loop's entire length. This leads us to conclude that impulsive heating of a single loop is not complex enough to explain this observation. Additional steady heating or a collection of additional strands along the line-­of-­sight would help to align the simulation with the observation.

coronal loop↗

The solar coronal density irregularity n squared bar/(n bar) squared derived from simultaneous measurements of the EUV and K-coronal brightness

Results are reported from a study of the low corona based on cospatial and cotemporal measurements of the K-coronal polarized brightness pB, and the intensity of the strong resonance line Mg x 625A as a function of height between 1.05 and 1.24 solar radius. Taken together, these measurements yield an estimate of the solar coronal density irregularity. This quantity, is found to be much greater than 1. On the basis of a simple two-component model, it is found that the well-studied resolved structures of the inner corona as presently understood are not capable of explaining the observed irregularity. It is conjectured that subresolution density fluctations associated with coronal dissipation and heating may be the source of the excess irregularity.

Orrall, F. Q.↗

The solar ultraviolet source for the ionosphere and its variation

Ion production in the ionospheric E and F regions is primarily due to solar EUV fluxes at wavelengths below 102.7 nm, where the flux ratios of maximum/minium for the present solar cycle were found to range from values around 3 for the dominant chromospheric emissions to much higher values for coronal emissions, resulting in a factor of about 4 in the integrated flux of the range 14-102.7 nm. The vertical distribution of ion production depends not only on the incident solar EUV fluxes but also on the structure of the absorbing neutral atmosphere (thermosphere). As the latter is strongly affected by solar EUV fluxes above 130 nm (production of atomic oxygen and heating), the observed increase, with ratios ranging from about 1.2 around 175-185 nm to about 2.3 around 140 nm, is at least indirectly important in the solar cycle variation of the ionosphere. The EUV variability models of the ionosphere using non EUV indices such as F sub 10.7, R sub Z or Ca2 plage indices are valuable as a crude guide only, but not for quantitative representations.

Hinteregger, H. E.↗

Physics of the inner heliosphere: Mechanisms, models and observational signatures

Selected problems concerned with the important physical processes that occur in the corona and solar wind acceleration region, particularly time dependent phenomena were studied. Both the physics of the phenomena and the resultant effects on observational signatures, particularly spectroscopic signatures were also studied. Phenomena under study include: wave motions, particularly Alfven and fast mode waves; the formation of standing shocks in the inner heliosphere as a result of momentum and/or heat addition to the wind; and coronal transient phenomena where momentum and/or heat are deposited in the corona to produce transient plasma heating and/or mass ejection. The development of theoretical models for the inner heliosphere, the theoretical investigation of spectroscopic plasma diagnostics for this region, and the analysis of existing skylab and other relevant data are also included.

Withbroe, George L.↗

On Heating Large Bright Coronal Loops by Magnetic Microexplosions at their Feet

In previous work, by registering Yohkoh SXT coronal X-ray images with MSFC vector magnetograms, we found that: (1) many of the larger bright coronal loops rooted at one or both ends in an active region are rooted around magnetic islands of included polarity, (2) the core field encasing the neutral line encircling the island is strongly sheared, and (3) this sheared core field is the seat of frequent microflares. This suggests that the coronal heating in these extended bright loops is driven by many small explosive releases of stored magnetic energy from the sheared core field at their feet, some of which magnetic microexplosions also produce the microflare heating in the core fields. In this paper, we show that this scenario is feasible in terms of the energy Abstract: required for the observed coronal heating and the magnetic energy available in the observed sheared core fields. In a representative active region, from the X-ray and vector field data, we estimate the coronal heating consumption by a selected typical large bright loop, the coronal heating consumption by a typical microflare at the foot of this loop, the frequency of microflares at the foot, and the available magnetic energy in the microflaring core field. We find that: (1) the rate of magnetic energy release to power the microflares at the foot (approx. 6 x 10(ext 25)erg/s) is enough to also power the coronal heating in the body of the extended loop (approx. 2 x l0(exp 25 erg/s), and (2) there is enough stored magnetic energy in the sheared core field to sustain the microflaring and extended loop heating for about a day, which is a typical time for buildup of neutral-line magnetic shear in an active region. This work was funded by the Solar Physics Branch of NASA's Office of Space Science through the SR&T Program and the SEC Guest Investigator Program.

Moore, Ronald L↗

Study of a Solar X-Ray Telescope

The highly structured nature of the outer solar atmosphere seems to be intimately linked to the presence, at the solar surface, of magnetic fields that have been generated inside the Sun and have emerged to the surface. The corona is brightest (and also hottest) at just those locations where the magnetic field has emerged from inside the Sun. Dynamo theory predicts that strong magnetic fields will be generated deep in the solar interior and that bundles or 'ropes' of magnetic flux will float to the surface. When this happens, a magnetically bipolar region will become visible, extending above the surface in a three-dimensional structure. The field lines penetrate through the surface, showing two magnetic poles, and also exhibit a three-dimensional structure above the surface. The structure created by the field emergence is rooted in the (relatively) cool photosphere and extends through the chromosphere and transition region to the corona. Thus, the magnetic field creates a region, called an active region, which contains portions at temperatures from less than 10(exp 4) K to greater than 10(exp 6) K, and is therefore visible at wavelengths from the infrared through x-rays. The locations where the magnetic field leaves and reenters the visible surface are called the 'footpoints' of the coronal structures associated with the magnetic field. The magnetic fields themselves are not directly visible. However, the hot coronal plasma is, for the most part, constrained to follow the direction of the magnetic field lines in the atmosphere. Now, 100 years after the discovery of x-rays by Wilhelm Roentgen in 1896, we can routinely make observations of the solar corona from outside the Earth's atmosphere in this region of the electromagnetic spectrum. As shown by comparing x-ray images with magnetograms, the bright corona over these bipolar magnetic regions consists of closed structures that seem to follow the orientation of the magnetic field. Although we can see down to the photosphere at x-ray wavelengths when observing the disk of the Sun, this part of the solar atmosphere emits so little that far from the peak of its Planck curve it appears dark in x-ray images. This impression of hot plasma following the magnetic field direction is further strengthened by quantitative studies that calculate coronal magnetic field strength and direction based on photospheric measurements and compare them with the observed brightness and location of the x-ray emitting structures. Such comparisons make it clear that, for the most part, the hot plasma conforms to the geometry of the magnetic field and that the coronal brightness is strongly linked to the strength of the magnetic fields which have erupted to the solar surface from the interior. It is also the case that the larger-scale, fainter corona, as well as coronal holes, are strongly influenced by the large-scale solar magnetic field. We may get a small hint of the reason that the coronal plasma outlines the direction of B by examining the thermal conductivity of a hot plasma in the presence of a magnetic field. This quantity has enormously different values in the directions parallel and perpendicular to the field for a coronal temperature of 10(exp 6) K, a particle density of 10(exp 9)/cu cm and a magnetic field strength of 100 G, the conductivity along the field is approximately 13 orders of magnitude greater than that perpendicular to the field. It is therefore not surprising that a parcel of plasma which is locally heated would conduct that heat preferentially in the direction of the field. We also note that the thermal conductivity parallel to the magnetic field increases with temperature T, while the perpendicular conductivity decreases. To the extent that the loop aspect ratio, i.e., the ratio of loop length to loop width, is determined by the thermal conductivity, we would expect that higher temperature loops are longer and thinner than cooler ones. However, if the loop width becomes smaller than the spatial resolution of the observing instrument, this effect will not be directly observable. For organizational purposes, we provide a listing of some scientific objectives for a Solar-B x-ray telescope, arranged in terms of identifiable features in the corona.

Golub, Leon↗

Contagious Coronal Heating from Recurring Emergence of Magnetic Flux

For each of six old bipolar active regions, we present and interpret Yohkoh/SXT and SOHO/MDI observations of the development, over several days, of enhanced coronal heating in and around the old bipole in response to new magnetic flux emerge= within the old bipole. The observations show: 1. In each active region, new flux emerges in the equatorward side of the old bipole, around a lone remaining leading sunspot and/or on the equatorward end of the neutral line of the old bipole. 2. The emerging field is marked by intense internal coronal heating, and enhanced coronal heating occurs in extended loops stemming from the emergence site. 3. In five of the six cases, a "rooster tail" of coronal loops in the poleward extent of the old bipole also brightens in response to the flux emergence. 4. There are episodes of enhanced coronal heating in surrounding magnetic fields that are contiguous with the old bipole but are not directly connected to the emerging field. From these observations, we suggest that the accommodation of localized newly emerged flux within an old active region entails far reaching adjustments in the 3D magnetic field throughout the active region and in surrounding fields in which the active region is embedded, and that these adjustments produce the extensive enhanced coronal heating. We also note that the reason for the recurrence of flux emergence in old active regions may be that active region flux tends to emerge in giant-cell convection downflows. If so, the poleward "rooster tail" is a coronal flag of a long-lasting downflow in the convection zone. This work was funded by NASA's Office of Space Science through the Solar Physics Supporting Research and Technology Program and the Sun-Earth Connection Guest Investigator Program.

Moore, Ronald L.↗

Requirements for Progress in Understanding Solar Flare Energy Transport: The Impulsive Phase

Solar flares are a fundamental component of solar eruptive events (SEEs), along with solar energetic particles (SEPs) and coronal mass ejections (CMEs). Flare emission is the first component of a SEE to impact the Earth’s ionosphere which can set the stage for the later effects of the space weather event. Magnetic reconnection drives SEEs by restructuring the solar coronalmagnetic field, liberating a tremendous amount of energy which is partitioned into various physical manifestations: particle acceleration,mass and magnetic-field eruption, atmospheric heating, and the subsequent emission of radiation as solar flares. In this white paper we discuss the observational and theoretical advances required in order to make substantial progress in understanding the physical processes acting during the impulsive phase of a flare. That is, the initial rapid and intense period in which a tremendous amount of energy is released over the span of several minutes, resulting in the dramatic broadband increase to the solar radiative output. A second white paper by us covers the flare’s gradual phase, that is the decay phase where processes occur over longer timescales.

Graham S. Kerr↗