Search NASA⌕ Search

SEARCH · Search NASA

Results for “T^3”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Giant low-field magnetocaloric effect and refrigerant capacity in reduced dimensionality EuTiO 3 multiferroics

Engineering magnetic materials into a thin film form while preserving its excellent magnetocaloric response is essential in the development of miniature magnetic coolers. We demonstrate how this can be achieved in the case of EuTiO 3 - an emerging multiferroic material. Unlike conventional cases where reduced dimensionality considerably decreased the magnetic entropy change (ΔS M ) and hence the refrigerant capacity (RC), we show the large low-field enhancements of ΔS M and RC in a ~100 nm thick nanocrystalline EuTiO 3 film (ΔS M ~ 24 J kg -1 K -1 and RC = 152 J kg -1 for μ 0 ΔH = 2T) relative to its single crystal counterpart (ΔS M ~ 17 J kg -1 K -1 and RC ~ 107 J kg -1 for μ 0 ΔH = 2T). The nanocrystalline EuTiO 3 film is an excellent candidate for cryogenic magnetic refrigeration. From our study, a new approach for improving both MCE and RC in magnetic nanomaterials is proposed, which will stimulate further research on magnetocaloric thin films and related cooling devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Structure of 3-mercaptopropionic acid dioxygenase with a substrate analog reveals bidentate substrate binding at the iron center

Thiol dioxygenases are a subset of nonheme iron oxygenases that catalyze the formation of sulfinic acids from sulfhydryl-containing substrates and dioxygen. Among this class, cysteine dioxygenases (CDOs) and 3-mercaptopropionic acid dioxygenases (3MDOs) are the best characterized, and the mode of substrate binding for CDOs is well understood. However, the manner in which 3-mercaptopropionic acid (3MPA) coordinates to the nonheme iron site in 3MDO remains a matter of debate. A model for bidentate 3MPA coordination at the 3MDO Fe-site has been proposed on the basis of computational docking, whereas steady-state kinetics and EPR spectroscopic measurements suggest a thiolate-only coordination of the substrate. To address this gap in knowledge, we determined the structure of Azobacter vinelandii 3MDO (Av3MDO) in complex with the substrate analog and competitive inhibitor, 3-hydroxypropionic acid (3HPA). The structure together with DFT computational modeling demonstrates that 3HPA and 3MPA associate with iron as chelate complexes with the substrate-carboxylate group forming an additional interaction with Arg168 and the thiol bound at the same position as in CDO. A chloride ligand was bound to iron in the coordination site assigned as the O 2 -binding site. Supporting HYSCORE spectroscopic experiments were performed on the (3MPA/NO)-bound Av3MDO iron nitrosyl (S = 3/2) site. In combination with spectroscopic simulations and optimized DFT models, this work provides an experimentally verified model of the Av3MDO enzyme–substrate complex, effectively resolving a debate in the literature regarding the preferred substrate-binding denticity. These results elegantly explain the observed 3MDO substrate specificity, but leave unanswered questions regarding the mechanism of substrate-gated reactivity with dioxygen.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Structural investigation of the temperature-stable relaxor dielectric Ba 0.8 Ca 0.2 TiO 3 -Bi(Mg 0.5 Ti 0.5 )O 3

Aberration corrected scanning transmission electron microscopy (STEM) and electron diffraction have been used to disclose local structure and nano-chemistry in a Ca modified BaTiO 3 -Bi(Mg 0.5 Ti 0.5 )O 3 relax or dielectric ceramic which exhibits high and near-invariant relative permittivity over a wide temperature range. High resolution, synchrotron X-ray diffraction indicated a globally cubic structure ($Pm$$\overline{3}$$m$), but direct atomic-scale imaging by STEM revealed local tetragonal distortions. Nanopolar clusters were identified from B-site atomic displacement vectors measured relative to oxygen ion positions along < 100 > and < 110 > zone axes of integrated differential phase contrast (iDPC) STEM images, highlighting cluster sizes of 2–5 nm. Chemical analysis by STEM-energy dispersive X-ray spectroscopy and full pattern refinements of X-ray powder diffraction data each implied high levels of Bi vacancies within the matrix. The possibility that these A-site vacancies modulate the nanopolar structure and promote flattening of the permittivity-temperature response in this class of dielectric is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The local structure of 0.5Ba(Zr 0.2 Ti 0.8 )O 3 -0.5(Ba 0.7 Ca 0.3 )TiO 3 from neutron total scattering measurements and multi-edge X-ray absorption analysis

Neutron total scattering measurements and multi-edge X-ray absorption analysis were performed on a 0.5Ba(Zr 0.2 Ti 0.8 )O 3 -0.5(Ba 0.7 Ca 0.3 )TiO 3 powder sample. The TiIII-II edges showed that titanium is distorted in the rhombohedral [111] direction (in a BaTiO 3 -like chemical and bonding environment). Extended X-ray fine structure analysis (EXAFS) was performed on the zirconium K-edge and it was found that zirconium resides in the center of the ZrO 6 octahedra in cubic symmetry. Furthermore, the local structure was initially modelled with the orthorhombic Amm2 space group with unsatisfactory results. To better model the local structure, the results from the EXAFS analysis were incorporated into the small-box pair distribution function (PDF) refinements and the best fit of the observed data was a combination of barium calcium titanate (BCT) and barium calcium zirconate (BCZ) phases.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Synthesis and characterization of the actinide tosylimido complexes [K(18-crown-6)][An(NSO 2 -$p$-tolyl)(NR 2 ) 3 ] (An = U, Th; R = SiMe 3 )

Reaction of 1 equiv of KN(H)Ts (Ts = p-MeC 6 H 4 SO 2 ) with the actinide metallacycles, [An IV (CH 2 SiMe 2 NSiMe 3 )(NR 2 ) 2 ] (An = U, Th; R = SiMe 3 ), in the presence of 18-crown-6, affords the imido complexes, [K(18-crown-6)][An IV (NTs)(NR 2 ) 3 ] (An = U, 1; Th, 2), in modest to moderate yields after work-up. Both complexes were characterized by X-ray crystallography and 1 H and 13 C{ 1 H} NMR spectroscopies. To our knowledge, they represent the first sulfonylimido complexes reported for the f elements. Finally, they are also a rare example of an isostructural set of actinide imido complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Implementation of new mixture rules has a substantial impact on combustion predictions for H 2 and NH 3

Complex-forming reactions comprise a substantial fraction of all important combustion reactions and are central to combustion behavior. Despite being often called “pressure-dependent” reactions, their rate constants depend on not only the pressure but also the composition. While modern combustion codes allow arbitrarily high accuracy in treating pressure dependence, recent work has consistently demonstrated dramatic failures of essentially all available treatments of mixture dependence. In situations where mixture dependence is treated at all, it is inevitably treated through specification of pressure-dependent rate constants for a set of pure bath gases, which are then combined to estimate the rate constant in a mixture via a “mixture rule.” While there had been a generally unquestioning confidence in these mixture rules, they had, in reality, been scarcely tested until the last decade, when comparisons against master equation calculations revealed order-of-magnitude errors for important pressure-dependent reactions. New mixture rules, based on the reduced pressure, have recently been proposed and shown to reproduce master equation calculations for broad classes of complex-forming reactions very accurately. Here, in this work, we present an implementation of one such new mixture rule (“LMR-R”) in Cantera and then use it to enable simulations that use new high-accuracy ab initio data for individual bath gases (for the first time, since codes previously could not accommodate the complex bath gas dependence). Demonstrations focus on combustion of H 2 and NH 3 , where (1) high-accuracy ab initio data are available and (2) the impact is expected to be large due to the high fractions of efficient colliders (e.g., H 2 O and NH 3 ) in the burned and unburned gases. Indeed, we find the impact of this treatment to be substantial and may explain previous modeling difficulties for these important carbon-free fuels, particularly for NH 3 , whose extraordinarily high third-body efficiency (~20) is often omitted from kinetic models.

Ammonia↗
DOE OSTI2021

On the Origin of Room-Temperature Amplified Spontaneous Emission in CsPbBr 3 Single Crystals

CsPbBr 3 is an all-inorganic halide perovskite with excellent photoluminescence (PL) properties for laser applications. Amplified spontaneous emission (ASE) is a prerequisite for lasing and typically observed from low-dimensional CsPbBr3 nanostructures, where quantum confinement enhances ASE. However, a gain medium for lasing should be prepared into a robust bulk form that works under intense light illumination. Here, we demonstrate that bulk CsPbBr 3 single crystals exhibit highly efficient ASE with a threshold of 46 MWcm -2 at 520 nm, if PL reabsorption via the indirect Rashba gap is properly suppressed by thickness control. Based on a series of spectroscopic and microscopic measurements, we show that this below-the-gap absorption can significantly alter the PL feature and even the apparent color of the crystal depending on the crystal size. Our results show that a thin CsPbBr 3 single crystal can be utilized for lasing applications when engineered into a submillimeter thickness for effective light–matter interaction.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Signatures of Non-universal Quantum Dynamics of Ultracold Chemical Reactions of Polar Alkali Dimer Molecules with Alkali Metal Atoms: Li( 2 S) + NaLi( a 3 Σ + ) → Na( 2 S) + Li 2 ( a 3 Σ u + )

Ultracold chemical reactions of weakly bound triplet-state alkali metal dimer molecules have recently attracted much experimental interest. Here we perform rigorous quantum scattering calculations with a new ab initio potential energy surface to explore the chemical reaction of spin-polarized NaLi(a 3 Σ + ) and Li( 2 S) to form Li 2 (a 3 Σ u + ) and Na( 2 S). The reaction is exothermic and proceeds readily at ultralow temperatures. Significantly, we observe strong sensitivity of the total reaction rate to small variations of the three-body part of the Li 2 Na interaction at short range, which we attribute to a relatively small number of open Li 2 (a 3 Σ u + ) product channels populated in the reaction. This provides the first signature of highly non-universal dynamics seen in rigorous quantum reactive scattering calculations of an ultracold exothermic insertion reaction involving a polar alkali dimer molecule, opening up the possibility of probing microscopic interactions in atom+molecule collision complexes via ultracold reactive scattering experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

The Hidden Path to the Resonance-Stabilized Fulvenallenyl Radical (C 7 H 5 ) via the Bimolecular Reaction of Tricarbon (C 3 , X 1 Σ g + ) with 1,3-Butadiene (C 4 H 6 ; X 1 A g )

Here, we report a novel bimolecular reaction pathway forming the resonance-stabilized fulvenallenyl radical (C 7 H 5 ) via the gas-phase reaction of tricarbon (C 3 , X 1 Σ g + ) with 1,3-butadiene (C 4 H 6 , X 1 A g ). Crossed molecular beam experiments combined with high-level electronic structures and statistical calculations reveal a rich potential energy surface. The reaction proceeds via tricarbon addition to a double bond of 1,3-butadiene, overcoming a 30 kJ mol –1 barrier, followed by ring closure, isomerizations (ring opening/closures, hydrogen shifts), and eventual hydrogen atom loss, yielding the fulvenallenyl radical (p1) almost exclusively via two dominant pathways. Considering the entrance barrier, this reaction may occur in high-temperature environments, like circumstellar envelopes of carbon stars, but is suppressed in colder regions such as molecular clouds and Titan’s atmosphere. These findings highlight the unexpected reactivity of small carbon clusters in shaping the molecular complexity of our universe, from the flicker of a flame to the death of a star.

Aromatic compounds↗
DOE OSTI2022

Nanoscale Control of the Metal–Insulator Transition at LaAlO 3 /KTaO 3 Interfaces

Recent reports of superconductivity at KTaO 3 (KTO) (110) and (111) interfaces have sparked intense interest due to the relatively high critical temperature as well as other properties that distinguish this system from the more extensively studied SrTiO 3 (STO)-based heterostructures. Here, we report the reconfigurable creation of conducting structures at intrinsically insulating LaAlO 3 / KTO(110) and (111) interfaces. Devices are created using two distinct methods previously developed for STO-based heterostruc-tures: (1) conductive atomic-force microscopy lithography and (2) ultralow-voltage electron-beam lithography. At low temperatures, KTO(110)-based devices show superconductivity that is tunable by an applied back gate. A one-dimensional nanowire device shows single-electron-transistor (SET) behavior. A KTO(111)-based device is metallic but does not become superconducting. Finally, these reconfigurable methods of creating nanoscale devices in KTO-based heterostructures offer new avenues for investigating mechanisms of superconductivity as well as development of quantum devices that incorporate strong spin-orbit interactions, superconducting behavior, and nanoscale dimensions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Polarization-Controlled Structural Modulation in the Single Atomic Layer at the PbZr 0.2 Ti 0.8 O 3 /LaNiO 3 Interface

Conductivity modulation via ferroelectric polarization coupling with LaNiO 3 (LNO) is demonstrated at an epitaxial ferroelectric–LNO interface. Conductivity measurements, varying the thickness of the LNO channel, show that this phenomenon is confined to a few atomic layers at the interface. Combining in situ biasing and off-axis holography, we mapped out electrostatic potentials at the PbZr 0.2 Ti 0.8 O 3 (PZT)/LNO/SrTiO 3 (STO) heterostructure upon polarization switching. Using aberration-corrected STEM, the interfacial atomic structures were investigated for the two different PZT polarization states. Polarization in PZT induces a significant change in the in-plane O–Ni–O bond angles, with a 37° modulation in the topmost 1 or 2 LNO unit cells, driven by strain in the oxygen sublattice for the two opposite polarization directions in PZT. Both oxygen and cation sublattices exhibit strain responses exceeding 10% upon switching. This atomic-layer structural modulation highlights a mechanism for functional oxide heterostructure development, offering pathways for advancements in nonvolatile memory, sensors, and energy-efficient transistors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Controlling Magnetization Vector Depth Profiles of La 0.7 Sr 0.3 CoO 3 /La 0.7 Sr 0.3 MnO 3 Exchange Spring Bilayers via Interface Reconstruction

The La 0.7 Sr 0.3 CoO 3–δ /La 0.7 Sr 0.3 MnO 3–δ (LSCO/LSMO) bilayer system is an ideal perovskite oxide platform for investigating interface reconstruction and its effect on their magnetic properties. Previous studies have shown that LSCO can separate into magnetic sublayers, which possess distinct trends as the total LSCO thickness increases. Here, we used polarized neutron reflectometry to quantify changes in the magnetic and chemical depth profiles, and it confirms the formation of ~12 Å-thick interfacial LSCO and LSMO layers, characterized by a decreased nuclear scattering length density compared to the bulk of the layers. This decrease is attributed to the combined effects of oxygen vacancy formation and interfacial charge transfer, which lead to magnetically active Co 2+ ions with ionic radii larger than the Co 3+ /Co 4+ ions typically found in bulk LSCO or single-layer films. The interfacial magnetization values, as well as Co 2+ ion and oxygen vacancy concentrations, depend strongly on the LSCO layer thickness. These results highlight the sensitive interplay of the cation valence states, oxygen vacancy concentration, and magnetization at interfaces in perovskite oxide multilayers, demonstrating the potential to tune their functional properties via careful design of their structure.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Ultrathin Atomic Layer Deposited Al 2 O 3 Overcoat Stabilizes Al 2 O 3 -Pt/Ni-Foam Hydrogenation Catalysts

Galvanic exchange seeds the growth of Pt nanostructures on Ni foam monolith. Subsequent atomic layer deposition of ultrathin Al 2 O 3 followed by annealing under air affords supported Pt catalysts with ultralow loading (0.020 ppm). Here, the Al 2 O 3 overcoat plays a crucial role in catalyst stability. In addition to the expected enhancement of the stability of the Pt particles on the surface, the ca. 2 nm Al 2 O 3 overcoat appears to also play a crucial role in the overall structural integrity of the NiO x nanoplates which grow on the Ni foam surface as a result of the preparative route. The resulting material is physically robust towards repeated handling and showcases retention of catalytic activity over ten standard catalyst recycling trials; standing in marked contrast to the uncoated samples. Catalyst activity was tested via the hydrogenation of various functionalized styrenes at low temperatures and low hydrogen pressure in ethanol as solvent, with a TOF as high as 9.5 × 10 6 h -1 for unfunctionalized styrene. Notably, the catalysts show excellent tolerance towards F, Cl, and Br substituents, and no hydrogenation of the aromatic ring.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Tuning In-Plane Magnetic Anisotropy and Interfacial Exchange Coupling in Epitaxial La 2/3 Sr 1/3 CoO 3 /La 2/3 Sr 1/3 MnO 3 Heterostructures

Controlling the in-plane magnetocrystalline anisotropy and interfacial exchange coupling between ferromagnetic (FM) layers plays a key role in next-generation spintronic and magnetic memory devices. In this work, we explored the effect of tuning the magnetocrystalline anisotropy of La 2/3 Sr 1/3 CoO 3 (LSCO) and La 2/3 Sr 1/3 MnO 3 (LSMO) layers and the corresponding effect on interfacial exchange coupling by adjusting the thickness of the LSCO layer (t LSCO ). The epitaxial LSCO/LSMO bilayers were grown on (110) o -oriented NdGaO 3 (NGO) substrates with a fixed LSMO (top layer) thickness of 6 nm and LSCO (bottom layer) thicknesses varying from 1 to 10 nm. Despite the small difference (~0.2%) in lattice mismatch between the two in-plane directions, [001] o and [11̅0] o , a pronounced in-plane magnetic anisotropy was observed. Soft X-ray magnetic circular dichroism hysteresis loops revealed that for t LSCO ≤ 4 nm, the easy axes for both LSCO and LSMO layers were along the [001] o direction, and the LSCO layer was characterized by magnetically active Co 2+ ions that strongly coupled to the LSMO layer. No exchange bias effect was observed in the hysteresis loops. In contrast, along the [11̅0] o direction, the LSCO and LSMO layers displayed a small difference in their coercivity values, and a small exchange bias shift was observed. As t LSCO increased above 4 nm, the easy axis for the LSCO layer remained along the [100] o direction, but it gradually rotated to the [11̅0] o direction for the LSMO layer, resulting in a large negative exchange bias shift. Therefore, we provide a way to control the magnetocrystalline anisotropy and exchange bias by tuning the interfacial exchange coupling between the two FM layers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Unique structural solution from a V H 3-30 antibody targeting the hemagglutinin stem of influenza A viruses

Broadly neutralizing antibodies (bnAbs) targeting conserved influenza A virus (IAV) hemagglutinin (HA) epitopes can provide valuable information for accelerating universal vaccine designs. Here, we report structural details for heterosubtypic recognition of HA from circulating and emerging IAVs by the human antibody 3I14. Somatic hypermutations play a critical role in shaping the HCDR3, which alone and uniquely among V H 3-30 derived antibodies, forms contacts with five sub-pockets within the HA-stem hydrophobic groove. 3I14 light-chain interactions are also key for binding HA and contribute a large buried surface area spanning two HA protomers. Comparison of 3I14 to bnAbs from several defined classes provide insights to the bias selection of V H 3-30 antibodies and reveals that 3I14 represents a novel structural solution within the V H 3-30 repertoire. The structures reported here improve our understanding of cross-group heterosubtypic binding activity, providing the basis for advancing immunogen designs aimed at eliciting a broadly protective response to IAV.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Electron pairing and nematicity in LaAlO 3 /SrTiO 3 nanostructures

Strongly correlated electronic systems exhibit a wealth of unconventional behavior stemming from strong electron-electron interactions. The LaAlO 3 /SrTiO 3 (LAO/STO) heterostructure supports rich and varied low-temperature transport characteristics including low-density superconductivity, and electron pairing without superconductivity for which the microscopic origins is still not understood. LAO/STO also exhibits inexplicable signatures of electronic nematicity via nonlinear and anomalous Hall effects. Nanoscale control over the conductivity of the LAO/STO interface enables mesoscopic experiments that can probe these effects and address their microscopic origins. Here we report a direct correlation between electron pairing without superconductivity, anomalous Hall effect and electronic nematicity in quasi-1D ballistic nanoscale LAO/STO Hall crosses. The characteristic magnetic field at which the Hall coefficient changes directly coincides with the depairing of non-superconducting pairs showing a strong correlation between the two distinct phenomena. Angle-dependent Hall measurements further reveal an onset of electronic nematicity that again coincides with the electron pairing transition, unveiling a rotational symmetry breaking due to the transition from paired to unpaired phases at the interface. The results presented here highlights the influence of preformed electron pairs on the transport properties of LAO/STO and provide evidence of the elusive pairing “glue” that gives rise to electron pairing in SrTiO 3 -based systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Spontaneously formed phonon frequency combs in van der Waals solid CrGeTe 3 and CrSiTe 3

Optical phonon engineering through nonlinear effects has been utilized in ultrafast control of material properties. However, nonlinear optical phonons typically exhibit rapid decay due to strong mode-mode couplings, limiting their effectiveness in temperature or frequency sensitive applications. Here we report the observation of long-lived nonlinear optical phonons through the spontaneous formation of phonon frequency combs in the van der Waals material CrXTe 3 (X=Ge, Si) using high-resolution Raman scattering. Unlike conventional optical phonons, the highest A g mode in CrGeTe 3 splits into equidistant, sharp peaks forming a frequency comb that persists for hundreds of oscillations and survives up to 200K. These modes correspond to localized oscillations of Ge 2 Te 6 clusters, isolated from Cr hexagons, behaving as independent quantum oscillators. Introducing a cubic nonlinear term to the harmonic oscillator model, we simulate the phonon time evolution and successfully replicate the observed comb structure. Similar frequency comb behavior is observed in CrSiTe 3 , demonstrating the generalizability of this phenomenon. Our findings demonstrate that Raman scattering effectively probes high-frequency nonlinear phonon modes, offering insight into the generation of long-lived, tunable phonon frequency combs with potential applications in ultrafast material control and phonon-based technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Additive-assisted synthesis and optoelectronic properties of (CH 3 NH 3 ) 4 Bi 6 I 22

Hybrid organic-inorganic halides containing Bi and Sb generally exhibit higher stability and lower toxicity compared to Pb analogues. Here, in this work, synthesis, crystal and electronic structures and optical properties of a brand-new methylammonium bismuth iodide, (MA) 4 Bi 6 I 22 (MA + = CH 3 NH 3 + ), are reported. Interestingly, we find that the presence of the HgI2 is necessary for the targeted preparation of (MA) 4 Bi 6 I 22 . (MA) 4 Bi 6 I 22 contains isolated [Bi 6 I 22 ] 4- clusters made of six edge-sharing octahedral BiI6 units, which are separated by MA + cations in its 0D crystal structure. A relatively low optical band gap of 1.9 eV was estimated for (MA) 4 Bi 6 I 22 based on diffuse reflectance measurements. An intense photoluminescence peak emerges at 636 nm at low temperatures that supports the assigned band gap value. Electronic structure calculations show the presence of flat bands in the valence and conduction bands, consistent with the low-dimensional structure of (MA) 4 Bi 6 I 22 , and slightly indirect nature of the bandgap. Our findings suggest that the use of facilitator moieties such as HgI 2 may provide a pathway to obtaining alternative methylammonium bismuth iodides to (MA) 3 Bi 2 I 9 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗