Search NASA⌕ Search

SEARCH · Search NASA

Results for “TiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

TiO2∙rGO nanocomposite as a photo catalyst for the reduction of Cr6+

Highlights: • Titania decorated reduced graphene oxide was fabricated by hydrothermal process. • TiO{sub 2} nanoparticles attached to the surfaces of the rGO are anatase. • rGO surfaces were covered with TiO{sub 2} nanoparticles whose average sizes. • Photocatalytic reduction of toxic Cr{sup 6+} is increased as x is increased. - Abstract: Titania decorated reduced graphene oxide (TiO{sub 2}∙x%rGO (x = 0, 1, 05, 10, 15, 20 and 25) nanocomposites (NC’s) were fabricated using a hydrothermal process. Scanning electron microscope (SEM) images show that the rGO surfaces were covered with TiO{sub 2} nanoparticles whose average sizes increased as x is increased. X Ray Diffraction (XRD) of all the NP’s exhibits the diffractions peaks of the anatase phase of the TiO{sub 2}. The Fourier-Transform Infrared (FT-IR) spectra of these NC’s indicate an increase in the Ti-O-C interfacial chemical bond vibration signals as x increases. A decrease in the energy of the band (energy) gap as the amount of rGO is increased is determined from the UV–vis light absorption spectra. The use of these TiO{sub 2}∙x%rGO NC’s to reduce toxic Cr{sup 6+} ions to nontoxic Cr{sup 3+} ions is studied. The photo-catalytic reduction of the toxic Cr{sup 6+} is seen in general to increase as x is increased.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

SiO2-TiO2 doped with Er3+/Yb3+/Eu3+ photoluminescent material: A spectroscopy and structural study about potential application for improvement of the efficiency on solar cells

Highlights: • Intense downconversion emission of Eu{sup 3+} under Uv excitation. • Upconversion emission assigned to the Er{sup 3+}/Yb{sup 3+} under 980 laser pump. • Double excitation simultaneous providing emission in visible range. • Potential application on improvement of solar cells. - Abstract: The various synthesis conditions to obtain a material based on SiO{sub 2}-TiO{sub 2} co-doped with Er{sup 3+}/Yb{sup 3+}/Eu{sup 3+} were investigated, searching for those that present the greatest potential to improve the efficiency of solar cells. Conditions adjusted included heat-treatment temperatures, concentrations of matrix, and concentrations of dopants. Raman spectroscopy results demonstrated the effect of the annealing temperatures on the TiO{sub 2} phase transition and the crystalline phase of the materials, which interfere with the photoluminescence of the materials. The band gap of the materials was evaluated by diffuse reflectance and it decreased due to the doping. The materials were able to absorb UV and IR energy and emit in the visible region, verified by the down conversion, up conversion and the double excitation of the materials. The results showed that the materials may be used as a strategy to use a greater portion of the solar spectrum, improving solar cell efficiency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of the synergistic effect between slow photons and electron trapping on the photocatalytic properties of TiO2 photonic crystals

Highlights: • We report the preparation of titanium dioxide photonic crystals (PCs) having two pore sizes. • Electronic band gap (BG) and photonic band gap (PBG) were determined with the use of UV–vis spectroscopy. • The position of PBG was affected by the pore size of PC. • Metallic silver (electron trapping centers) were generated on the surface of both types of PCs by a photoreduction of silver Ag{sup +} ions. • Photocatalytic properties of silver-modified TiO{sub 2} photonic crystals were enhanced by synergistic effect caused by overlapping the edges of PBG and BG combined with electron trapping by AgNPs. - Abstract: Titanium dioxide photonic crystals (PCs) were obtained using the sol-gel method and polystyrene (PS) microspheres as a template with two different diameters: 300 nm and 460 nm. The resulting materials were labeled as PC-300 and PC-460. In the following step, PCs were modified with silver nanoparticles (AgNPs) generated by the photoreduction of silver Ag{sup +} ions. The obtained PCs were denoted as AgNPs/PC-300 and AgNPs/PC-460. The size of the AgNPs were 28 nm ± 2 nm for the AgNPs/PC-300 and 21 nm ± 1 nm for AgNPs/PC-460. The characteristic features of TiO{sub 2} PCs, such as electronic band gap (BG), photonic band gap (PBG) and an occurrence of slow photon effect (SPE), were determined with the use of UV–vis spectroscopy. The photocatalytic performance of the prepared PCs was defined by monitoring the photodegradation rates of Rhodamine B (RhB) measured in the presence of PC-300, PC-460, AgNPs/PC-300, AgNPs/PC-460 and non-porous TiO{sub 2} coating (NPC) as reference material. It was found that the appropriate utilization of SPE by overlapping the edge of PBG with semiconductor BG and electron trapping by the presence of AgNPs exerted a strong synergistic effect on the photocatalytic properties of AgNPs/PCs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Aspect ratio control and photocatalytic properties analysis of anatase TiO2 nanoparticles

Highlights: • TiO{sub 2} nanoparticles with different aspect ratio were prepared and characterized. • Their aspect ratio is tuned by varying surfactants molar ratio and concentration. • TiO{sub 2} nanoparticles show photocatalytic activities in degradation of methylene blue. - Abstract: Anatase TiO{sub 2} nanoparticles with tuning size and aspect ratio were successfully prepared by a simple solvothermal method, using ethanol as a solvent, titanium butoxide as a precursor, and oleic acid and oleylamine as anionic and cationic capping agents, respectively. The average size and aspect ratio of these nanoparticles can be greatly regulated by varying the oleic acid/oleylamine molar ratio while keeping their total molar content constant and finely adjusted by increasing the total capping agents molar concentration in solvent at constant molar ratio (oleic acid/oleylamine molar ratio = 1:1). The variation of molar ratio or molar concentration enables a manipulation of the growth rate along different facets of TiO{sub 2} nanoparticles and, consequently, a control of the aspect ratio of these nanoparticles. Moreover, the photocatalytic degradation rate of methyl blue for sample prepared with molar ratio of oleic acid to oleylamine at 6:24 is over 11% higher than that for the other samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Lead free, air stable perovskite derivative Cs2SnI6 as HTM in DSSCs employing TiO2 nanotubes as photoanode

Highlights: • Cs{sub 2}SnI{sub 6} HTM layer was deposited onto titania nanotube photoanode through dip coating to fabricate all solid state DSSCs. • Enhanced photo conversion efficiency was obtained through varying dip coating time for Cs{sub 2}SnI{sub 6} HTM on TNT photoanode. • ss-DSSCs with lead-free perovskite derivative Cs{sub 2}SnI{sub 6} as HTM shows stable performance up to 10 days. - Abstract: Cs{sub 2}SnI{sub 6} is an air-stable and non-toxic perovskite variant photovoltaic material which exhibits p-type conductivity under doped conditions. In this work, we report the synthesis and stability studies of Cs{sub 2}SnI{sub 6} towards its application as a solid-state Hole Transport Material (HTM) in Titania Nanotube (TNT) based Dye Sensitized Solar Cells (DSSCs). Cs{sub 2}SnI{sub 6} crystals were synthesized using precipitation method and its stability was assessed using X-ray diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS) and Thermogravimetric Analysis (TGA). Cs{sub 2}SnI{sub 6} doped with SnI{sub 2} was deposited onto the TNT photo-anode as the HTM layer through dip coating. Deposition time was varied to obtain a continuous layer of Cs{sub 2}SnI{sub 6} HTM over TNT photo-anode and cell characteristics were studied. We were able to fabricate air stable, all solid-state solar cells with a Jsc of 6 mA/cm{sup 2}, Voc of 536 mV and PCE of 1.3%. The study propounds contemporary analysis on Sn based perovskite systems, in the field of DSSCs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sol-gel preparation and characterization of Er3+ doped TiO2 luminescent nanoparticles

Highlights: • Sol-gel derived Er{sup 3+} doped TiO{sub 2} nanoparticles for potential use in solar cells and bio imaging. • Influence of Er{sup 3+} doping into TiO{sub 2} with various Er{sup 3+} concentration on structural, optical, and luminescence properties. • Down-and up-conversion luminescence behaviour of Er{sup 3+} doped titanium dioxide. - Abstract: The present paper reports on down-and up-conversion luminescence behaviour of sol-gel derived erbium doped titanium dioxide with anatase structure. Through combined structural, optical and electron microscope analysis, effective and influence of Er{sup 3+} doping into TiO{sub 2} lattice has been demonstrated using X-Ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and optical reflectance spectra. XRD results showed only anatase diffraction peaks of TiO{sub 2}, indicating the formation of a pure anatase phase even after Er{sup 3+} incorporation into TiO{sub 2} lattice. Selected Area Electron Diffraction (SAED) confirmed that the synthesized TiO{sub 2} nanoparticles are polycrystalline in nature which correlated well with XRD findings. Upon excitation at 320 nm, two down-conversion contributions at 378 nm and 435 nm attributed to indirect band gap and defect-related emissions, respectively were observed from both pure and Er{sup 3+} doped TiO{sub 2} nanoparticles. On the other hand, strong green up-conversion emission centred at 544 nm ascribed to {sup 4}S{sub 3/2 }→ {sup 4}I{sub 15/2} transition of Er{sup 3+} was observed under 980 nm laser excitation for all Er{sup 3+} doped TiO{sub 2} samples. This result analysis brings insight on understanding of structural, optical and luminescence properties of Er{sup 3+} doped TiO{sub 2} nanoparticles for use in solar cells and bio imaging devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗