Search NASA⌕ Search

SEARCH · Search NASA

Results for “UTILITY PROGRAM DESIGN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Microstrip patch antenna panel for large aperture L-band phased array

This paper describes the design and development of a large, lightweight antenna panel for an active phased array operating at L-band. The panel was developed under a JPL program of technology development for space based radar. It utilizes dual-stacked patch elements that are interconnected with corporate feed manifold of striplines. This paper focuses on the electromagnetic design and performance of the radiating elements, with emphasis on scan performance, and also addresses mechanical and thermal aspects of the panel. The element in the array environment has a bandwidth of more than 80MHz centered at 1260MHz and is fed so that it can radiate orthogonal linear polarizations. The envisioned phased array, with a nominal aperture of 50m x 2m, is designed to scan +/-45 degrees in azimuth and +/-20 degrees in elevation. The panel of radiating elements has a mass density of 3.9 kg/m2, which represents approximately 50% of the target 8kg/m2 total panel mass density that includes T/R modules and feed manifolds.

T/R modules↗
NASA NTRS2023

Launch Complex 39B, SWMU 009 Air Sparging System Expansion Implementation Work Plan Kennedy Space Center, Florida

This Implementation Work Plan (IWP) for expansion of the Air Sparging (AS) system at Launch Complex 39B (LC39B), presents the design and coordination specifics to expand the existing AS Interim Measure (IM) at LC39B located at Kennedy Space Center (KSC), Florida. The existing AS system at LC39B was installed in 2017 and included 279 AS wells. LC39B has been designated as Solid Waste Management Unit (SWMU) 009 under the KSC Resource Conservation and Recovery Act (RCRA) Corrective Action Program. Expansion of the AS IM will include installation of an additional five AS wells to depths of approximately 13 and 17 feet below land surface (bls) to remediate contaminated groundwater identified northwest of the launch pad, near the liquid oxygen (LOX) tank. The expansion will target concentrations of cis-1,2-dichloroethene (cDCE) and vinyl chloride (VC) greater than Florida Department of Environmental Protection (FDEP) Natural Attenuation Default Concentrations (NADCs) that were identified during direct push technology (DPT) sampling events between 2019-2022 in shallow intervals between 8 and 16 feet bls. The objective for this expansion is to remediate contaminated groundwater within the treatment zone to below NADCs to support transition to monitored natural attenuation (MNA) through a long-term monitoring (LTM) program. This expansion will treat approximately 0.07-acres of residual groundwater contamination. The IWP design for this expansion will utilize the existing AS system trailer that is already onsite and operating. The five new AS expansion wells will be integrated into the existing Zone Z4 distribution manifold to deliver compressed air to the new AS wells. To deliver airflow, three existing lateral lines will be split in the field at a lateral split junction point (using 2-way or 3-way splits). Each split lateral will supply air to AS wells at the same depth interval to minimize preferential pathways. The trenching layout for the new AS wells was developed to minimize ground disturbance due to the amount of utilities in the area. One new monitoring well will also be installed and added to LC39B’s performance monitoring program to evaluate the effectiveness of the AS system expansion. This well will be sampled on a semi-annual basis for volatile organic compounds, with results evaluated to determine if system adjustments may be required. The main components of this IWP were presented to the KSC Remediation Team (KSCRT) at the October 2022 Meeting (Meeting 2210-M05). DPT delineation data from the LOX area were also presented, which included some inferred boundaries due to physical restrictions of the LOX tank and associated concrete pad and infrastructure. Planned monitoring well sampling in this area will help determine if back-diffusion may be occurring from beneath the pad. Additionally, based on potential petroleum odors and staining identified at two DPT locations during the January 2022 DPT event in the 10-16 feet bls range, a KSCRT action item was assigned during the October 2022 meeting to collect soil samples for petroleum compounds if similar odors or staining are identified during IM implementation. Construction completion and performance monitoring will be incorporated into LC39B’s groundwater monitoring reports, which are currently submitted on an annual basis to FDEP to document operation and maintenance activities and results from the AS IM.

Deborah M. Wilson↗
NASA NTRS2002

The Role of Formal Experiment Design in Hypersonic Flight System Technology Development

Hypersonic airbreathing engine (scramjet) powered vehicles are being considered to replace conventional rocket-powered launch systems. Effective utilization of scramjet engines requires careful integration with the air vehicle. This integration synergistically combines aerodynamic forces with propulsive cycle functions of the engine. Due to the highly integrated nature of the hypersonic vehicle design problem, the large flight envelope, and the large number of design variables, the use of a statistical design approach in design is effective. Modern Design-of-Experiments (MDOE) has been used throughout the Hyper-X program, for both systems analysis and experimental testing. Application of MDOE fall into four categories: (1) experimental testing; (2) studies of unit phenomena; (3) refining engine design; and (4) full vehicle system optimization. The MDOE process also provides analytical models, which are also used to document lessons learned, supplement low-level design tools, and accelerate future studies. This paper will discuss the design considerations for scramjet-powered vehicles, specifics of MDOE utilized for Hyper-X, and present highlights from the use of these MDOE methods within the Hyper-X Program.

McClinton, Charles R.↗
NASA NTRS1976

A regenerable CO2 and humidity control system for Shuttle

A regenerable CO2 and humidity control system is presently being developed for potential use on Shuttle as an alternate to the baseline Lithium Hydroxide (LiOH) system. The system utilizes a sorbent material (designated 'HS-C') to adsorb CO2 and water vapor from the cabin atmosphere and desorb the CO2 and water vapor overboard when exposed to a space vacuum. Past development programs concentrated on material development and breadboard system fabrication and testing. The present program calls for the design of a flight prototype system capable of integration into the Shuttle vehicle and the development of major components. This paper will show that a regenerable system utilizing HS-C material trades even with the shuttle LiOH system for the baseline four-man, seven-day mission and offers increased savings up to 448 kg for a seven-man, 30-day mission.

Boehm, A. M.↗
DOE OSTI2016

Developing Detectors for Scintillation Light in Liquid Argon for DUNE

The Deep Underground Neutrino experiment will conduct a broad program of physics research by studying a beam of neutrinos from Fermilab, atmospheric neutrinos, neutrinos from potential supernovae, and potential nucleon decay events. In pursuit of these studies, the experiment will deploy four 10kt fiducial mass liquid argon time projection chambers underground in Lead, South Dakota. Liquid argon time projection chambers allow high-resolution tracking and energy measurements. A precise timing signal is needed to provide the necessary time stamp to localize events in the drift direction. As liquid argon is a natural scintillator, a photon detection system will be deployed to provide such a signal, especially for non-beam events. In the baseline design for the single-phase time projection chamber, the detectors are contained within the anode plane assemblies. The design of two prototypes utilizing wavelength shifters and light guides are presented, and aspects of the research and development program are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1996

Experimental and Analytical Study of Two-Phase Flow in Microgravity

Design of the two-phase flow systems which are anticipated to be utilized in future spacecraft thermal management systems requires a knowledge of two-phase flow and heat transfer parameters in reduced gravities. A program has been initiated by NASA to design a two-phase test loop and to perform a series of experiments to study the effect of gravity on the Critical Heat Flux (CHF) and onset of instability. The test loop is also instrumented to generate data for two-phase pressure drop. In addition to low gravity airplane trajectory testing, the experimental program consisted of a set of laboratory tests which were intended to generate data under the bounding conditions (+1 g and -1 g) in order to plan the test matrix. One set of airplane trajectory tests has been performed and several modifications to the test set-up have been identified. Preliminary test results have been used to demonstrate the applicability of the earth gravity models for prediction of the two-phase friction pressure drop.

McQuillen, John B.↗
DOE OSTI2024

Cybersecurity for the Operational Technology Environment (CyOTE) (Final Technical Report)

Electric grids have historically been susceptible to both physical attacks and environmental hazards but the implementation of smart grids, remote management, and self-healing networks, has now made the grid vulnerable to cyber attacks. To address risks introduced by routable connectivity, utilities must establish dynamic solutions to identify, protect, detect, respond to, and recover from cyber security threats and vulnerabilities. In response to the evolving threat landscape U.S. Department of Energy-Office of Cybersecurity, Energy Security, and Emergency Response (DOE CESER) initiated the Cybersecurity for the OT Environment (CyOTE) pilot program, a U.S. Department of Energy (DOE) effort designed to leverage U.S. intelligence capabilities to prevent, detect, or mitigate a cyber attack on utility operational technology (OT) networks. As part of the CyOTE pilot, The Southern Company (Southern Company or Southern) researched, evaluated and deployed emerging Commercial off the Shelf (COTS) technologies and cyber security monitoring architectures to provide previously unrealized network visibility and situational awareness through deep packet inspection and data analytics. This Final Scientific/Technical Report documents the objectives, methodology, lessons learned, and results of Southern Company’s participation in the CyOTE pilot from December 2018 to September 2023.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2018

Time-Varying Value of Energy Efficiency in Michigan

Quantifying the time-varying value of energy efficiency is necessary to properly account for all of its benefits and costs and to identify and implement efficiency resources that contribute to a low-cost, reliable electric system. Historically, most quantification of the benefits of efficiency has focused largely on the economic value of annual energy reduction. Due to the lack of statistically representative metered end-use load shape data in Michigan (i.e., the hourly or seasonal timing of electricity savings), the ability to confidently characterize the time-varying value of energy efficiency savings in the state, especially for weather-sensitive measures such as central air conditioning, is limited. Still, electric utilities in Michigan can take advantage of opportunities to incorporate the time-varying value of efficiency into their planning. For example, end-use load research and hourly valuation of efficiency savings can be used for a variety of electricity planning functions, including load forecasting, demand-side management and evaluation, capacity planning, long-term resource planning, renewable energy integration, assessing potential grid modernization investments, establishing rates and pricing, and customer service (KEMA 2012). In addition, accurately calculating the time-varying value of efficiency may help energy efficiency program administrators prioritize existing offerings, set incentive or rebate levels that reflect the full value of efficiency, and design new programs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1998

X-34 Main Propulsion System Design and Operation

The X-34 program is a joint industry/government program to develop, test, and operate a small, fully-reusable hypersonic flight vehicle, utilizing technologies and operating concepts applicable to future Reusable Launch Vehicle (RLV) systems. The vehicle will be capable of Mach 8 flight to 250,000 feet altitude and will demonstrate an all composite structure, composite RP-1 tank, the Marshall Space Flight Center (MSFC) developed Fastrac engine, and the operability of an advanced thermal protection systems. The vehicle will also be capable of carrying flight experiments. MSFC is supporting the X-34 program in three ways: Program Management, the Fastrac engine as Government Furnished Equipment (GFE), and the design of the Main Propulsion System (MPS). The MPS Product Development Team (PDT) at MSFC is responsible for supplying the MPS design, analysis, and drawings to Orbital. The MPS consists of the LOX and RP-1 Fill, Drain, Feed, Vent, & Dump systems and the Helium & Nitrogen Purge, Pressurization, and Pneumatics systems. The Reaction Control System (RCS) design was done by Orbital. Orbital is the prime contractor and has responsibility for integration, procurement, and construction of all subsystems. The paper also discusses the design, operation, management, requirements, trades studies, schedule, and lessons learning with the MPS and RCS designs.

Champion, R. J., Jr.↗
NASA NTRSDate not supplied

International Space Station as a Testbed for Exploration Environmental Control and Life Support Systems - 2021 Status

Human exploration missions beyond low earth orbit, such as NASA’s Artemis Program, present significant challenges to spacecraft system design and supportability. A particularly challenging area is the Environmental Control and Life Support System (ECLSS) that maintains a habitable and life-sustaining environment for crewmembers. NASA is utilizing the experience gained from its current and prior spaceflight programs to mature life support technologies for exploration missions to deep space. The intent is to establish a portfolio of life support system capabilities with proven performance and reliability to enable human exploration missions and reduce risk to success of those missions. As a fully operational human-occupied platform in microgravity, the International Space Station (ISS) presents a unique opportunity to act as a testbed for exploration-class ECLSS, such that these systems may be tested, proven, and refined for eventual deployment on deep space human exploration missions. This paper will provide an updated status on the testbed development including hardware and ISS vehicle integration progress to date as well as future plans for efforts to design, select, build, test and fly Exploration ECLSS on the ISS.

Laura A Shaw↗
NASA NTRSDate not supplied

International Space Station as a Testbed for Exploration Environmental Control and Life Support Systems - 2022 Status

Human exploration missions beyond low earth orbit, such as NASA’s Artemis Program, present significant challenges to spacecraft system design and supportability. A particularly challenging area is the Environmental Control and Life Support System (ECLSS) that maintains a habitable and life-sustaining environment for crewmembers. NASA is utilizing the experience gained from its current and prior spaceflight programs to mature life support technologies for exploration missions to deep space. The intent is to establish a portfolio of life support system capabilities with proven performance and reliability to enable human exploration missions and reduce risk to success of those missions. As a fully operational human-occupied platform in microgravity, the International Space Station (ISS) presents a unique opportunity to act as a testbed for exploration-class ECLSS, such that these systems may be tested, proven, and refined for eventual deployment on deep space human exploration missions. This paper will provide an updated status on the testbed development including hardware and ISS vehicle integration progress to date as well as future plans for efforts to design, select, build, test and fly Exploration ECLSS on the ISS.

ECLSS↗
NASA NTRSDate not supplied

International Space Station as a Testbed for Exploration Environmental Control and Life Support Systems - 2023 Status

Human exploration missions beyond low earth orbit, such as NASA’s Artemis Program, present significant challenges to spacecraft system design and supportability. A particularly challenging area is the Environmental Control and Life Support System (ECLSS) that maintains a habitable and life-sustaining environment for crewmembers. NASA is utilizing the experience gained from its current and prior spaceflight programs to mature life support technologies for exploration missions to deep space. The intent is to establish a portfolio of life support system capabilities with proven performance and reliability to enable human exploration missions and reduce risk to success of those missions. As a fully operational human-occupied platform in microgravity, the International Space Station (ISS) presents a unique opportunity to act as a testbed for exploration-class ECLSS, such that these systems may be tested, proven, and refined for eventual deployment on deep space human exploration missions. This paper will provide an updated status on the testbed development including hardware and ISS vehicle integration progress to date as well as future plans for efforts to design, select, build, test and fly Exploration ECLSS on the ISS.

ECLSS↗
NASA NTRSDate not supplied

International Space Station (ISS) as A Testbed for Exploration Environmental Control and Life Support Systems (ECLSS)- 2023 Status

Human exploration missions beyond low earth orbit, such as NASA’s Artemis Program, present significant challenges to spacecraft system design and supportability. A particularly challenging area is the Environmental Control and Life Support System (ECLSS) that maintains a habitable and life-sustaining environment for crewmembers. NASA is utilizing the experience gained from its current and prior spaceflight programs to mature life support technologies for exploration missions to deep space. The intent is to establish a portfolio of life support system capabilities with proven performance and reliability to enable human exploration missions and reduce risk to success of those missions. As a fully operational human-occupied platform in microgravity, the International Space Station (ISS) presents a unique opportunity to act as a testbed for exploration-class ECLSS, such that these systems may be tested, proven, and refined for eventual deployment on deep space human exploration missions. This paper will provide an updated status on the testbed development including hardware and ISS vehicle integration progress to date as well as future plans for efforts to design, select, build, test and fly Exploration ECLSS on the ISS.

ECLSS↗
NASA NTRS2024

International Space Station as a Testbed for Exploration Environmental Control and Life Support Systems - 2024 Status

Human exploration missions beyond low earth orbit, such as NASA’s Artemis Program, present significant challenges to spacecraft system design and supportability. A particularly challenging area is the Environmental Control and Life Support System (ECLSS) that maintains a habitable and life-sustaining environment for crewmembers. NASA is utilizing the experience gained from its current and prior spaceflight programs to mature life support technologies for exploration missions to deep space. The intent is to establish a portfolio of life support system capabilities with proven performance and reliability to enable human exploration missions and reduce risk to success of those missions. As a fully operational human-occupied platform in microgravity, the International Space Station (ISS) presents a unique opportunity to act as a testbed for exploration-class ECLSS, such that these systems may be tested, proven, and refined for eventual deployment on deep space human exploration missions. This paper will provide an updated status on the testbed development including hardware and ISS vehicle integration progress to date as well as future plans for efforts to design, select, build, test and fly Exploration ECLSS on the ISS.

ECLSS↗
NASA NTRSDate not supplied

International Space Station as a Testbed for Exploration Environmental Control and Life Support Systems – 2024 Status

Human exploration missions beyond low Earth orbit, such as NASA’s Artemis Program, present significant challenges to spacecraft system design and supportability. A particularly challenging area is the Environmental Control and Life Support System (ECLSS) that maintains a habitable and life-sustaining environment for crewmembers. NASA is utilizing the experience gained from its current and prior spaceflight programs to mature life support technologies for exploration missions to deep space. The intent is to establish a portfolio of life support system capabilities with proven performance and reliability to enable human exploration missions and reduce risk to success of those missions. As a fully operational human-occupied platform in microgravity, the International Space Station (ISS) presents a unique opportunity to act as a testbed for exploration-class ECLSS, such that these systems may be tested, proven, and refined for eventual deployment on deep space human exploration missions. This paper will provide an updated status on the testbed development, including hardware and ISS vehicle integration progress to date, as well as future plans for efforts to design, select, build, test, and fly Exploration ECLSS on the ISS.

ECLSS↗
NASA NTRS1995

Applied virtual reality in aerospace design

A virtual reality (VR) applications program has been under development at the Marshall Space Flight Center (MSFC) since 1989. The objectives of the MSFC VR Applications Program are to develop, assess, validate, and utilize VR in hardware development, operations development and support, mission operations training and science training. Before VR can be used with confidence in a particular application, VR must be validated for that class of applications. For that reason, specific validation studies for selected classes of applications have been proposed and are currently underway. These include macro-ergonomic 'control room class' design analysis, Spacelab stowage reconfiguration training, a full-body microgravity functional reach simulator, a gross anatomy teaching simulator, and micro-ergonomic design analysis. This paper describes the MSFC VR Applications Program and the validation studies.

Hale, Joseph P.↗
DOE OSTI2018

Barriers and Opportunities to Broader Adoption of Integrated Demand Side Management at Electric Utilities: A Scoping Study

Integrated demand-side management (IDSM) is a strategic approach to designing and delivering a portfolio of demand side management (DSM) programs to customers. IDSM typically delivers customer centric strategies with the goal of increasing the amount of DSM in the field, but doing so in a way that integrates various measures and technologies to improve their collective performance and/or penetration. Specifically, IDSM can be defined as the integrated or coordinated delivery of three or more of: (1) energy efficiency (EE), (2) demand response (DR), (3) distributed generation (DG), (4) storage, (5) electric vehicle (EV) technologies, and (6) time-based rate programs to residential and commercial electric utility customers. The electric industry’s limited experience deploying IDSM to date suggests that significant barriers may exist. This report explores recent electric utility experience with IDSM to provide an assessment of the barriers and potential benefits perceived or experienced by program administrators in their attempts to implement integrated programs. The research draws on surveys and interviews with eleven staff from a sample of eight DSM program administrators and program implementers who were currently implementing or had previously attempted to implement an IDSM program or initiative. Respondents provided their perspectives on drivers for IDSM and barriers to broader deployment. They also reported on actions they had undertaken to promote expanded delivery of IDSM and provided their assessments of the most important under-tapped opportunities for expanding IDSM efforts, both for program administrator and regulatory organizations.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

A matheuristic for design and dispatch of a utility-connected distributed energy system

Modeling distributed power generation systems often requires complicated mathematical expressions that present challenges for commercial optimization solvers. Here, this paper presents a matheuristic to solve a mixed-integer optimization model that informs decisions regarding the design and dispatch of a utility-connected microgrid. We deploy a genetic algorithm to search the system design space and a linear program to solve the economic dispatch problem. The model is a component of a web tool that requires solutions within a few minutes. Our method yields objective function values within 5% of an exogenously produced optimal in fewer than 30 seconds for 90% of our test cases compared to only 10% of our test cases by a traditional optimization solver in the same amount of time.

24 POWER TRANSMISSION AND DISTRIBUTION↗