Search NASA⌕ Search

SEARCH · Search NASA

Results for “Value function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Exceeding 200 ns Lifetimes in Polycrystalline CdTe Solar Cells

CdTe photovoltaics has achieved one of the lowest levelized costs of electricity among all energy sources. However, for decades, carrier lifetimes have been inferior to those of other prevalent solar cell materials. This quality has inhibited common methods to improve solar cell efficiency such as back-surface fields, electron reflectors, or bifacial solar cells. In this work, a significant increase in carrier lifetime to values exceeding 200 ns in fully functional CdTe solar cells is demonstrated. The increased lifetime is achieved by large CdSeTe grains at the absorber/emitter interface, intragrain passivation in the absorber layer, and chemical passivation by forming nanoscale oxidized tellurium species at the transparent conducting oxide interface. The carrier lifetime is correlated to the open-circuit voltage and enables paths for back-surface manipulation and novel cell architectures to further improve CdTe photovoltaic performance.

14 SOLAR ENERGY↗
DOE OSTI2019

Effects of Soil Properties on Cadmium Toxicity to Folsomia candida (Collembola)

The study was endeavored to investigate the effects of soil properties on the acute and chronic cadmium (Cd) toxicities to Folsomia candida (Collembola F. candida). Results of the present study indicated that 10% lethal concentrations (LC10) in a period of 7 days were ranged from 68.6 to > 1000 mg/kg Cd. Soil Cd concentrations that halve F. candida reproductions (EC50, 28 days) were ranged from 41.4 to 146.8 mg/kg. Stepwise regression analysis between the thresholds of Cd toxicity and soil properties revealed that the pH and organic matter (OM) were two fundamental factors for the assessment of biological threats posed by Cd. The exchangeable Cd was mainly affected by soil pH. The reproduction inhibition and adult mortality ratios of F. candida were positively correlated with soil exchangeable Cd. The development of a comprehensive pedotransfer function based on pH and OM values would be suitable for accurately assessing the biological risks arising from Cd contamination.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

To the Calculations of Scattering Amplitudes in Diffraction Problems for Elongated Bodies of Revolution

This paper is a complement to the article “Scattering amplitudes in a neighborhood of limit rays in short-wave diffraction by elongated bodies of revolution”. It contains discussions of some points of the article, which worth of more detailed considerations, such as the influence of the integration limits on the computation result of scattering amplitudes and the estimation of permissible values of scattering angle intervals as functions of parameters of the problems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Relation between carriers hopping rate and structural constants in amorphous carbon nickel films with different nickel nanoparticles distributions

In this paper, the films were prepared by radio frequency magnetron co-sputtering technique. The effect of different mosaic targets made of nickel strips and graphite pure on the dielectric relaxation time, the carriers hopping rate, the fractal dimensions and the optical loss of films were studied. The values of the optical band gap of films using the cross-point between the tangent of the plot of lower and higher values of the photon energy were calculated. The films deposited at 4.64% have maximum hopping rate of about 8.6 × 10{sup 12} S{sup −1}. It can be seen that the films deposited at 3.92% have minimum value of fractal dimension of 2.27. With increasing Ni content of films a nonmetal–metal transition is observed which it is explainable by the power law of percolation theory. Critical metal content and the critical exponent of films were 87.25% and 1, respectively. With increasing Ni content, the carriers effective mass of films decreased and average lattice separation values of films increased. Films deposited at 3.92% have minimum value of Debye frequency ν{sub D} of about 1.09 × 10{sup 12} Hz. The value of energy loss by free charge carriers when traversing the bulk and surface of films at 3.92% has maximum value and it has an increasing function behavior with energy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2019

Optimization of Heat Treatment Cycles and Characterization of Aluminum Alloy AA7010

Multistage retrogression and reaging (RRA) heat treatment has been carried out on aluminum alloy AA7010. Each of the heat treatment steps for this alloy has been optimized on the basis of preliminary hardness and electrical conductivity measurements. These values were found to be a function of precipitate morphology and distribution. Samples were solution-treated (ST) with three different temperatures and quenching media, further aged at fixed temperature (120 °C) with time ranging from 24 to 120 h. Retrogression and reaging is done at 180-240 °C (for time duration of 2-60 min) and 120 °C (for 24-90 h), respectively. ST at 480 °C followed by warm water quenching (70 °C), aging cycle for T6 and T73 condition: 120 °C/42 h and 170 °C/128 h were found to be optimum. The optimum RRA conditions were achieved at retrogression parameters of 200 °C for 60 min and 240 °C for 60 min along with aging parameters of 120 °C/30 h and 120 °C/36 h, respectively. TEM images showed the presence of uniformly distributed precipitates in the matrix in RRA conditions. Statistical distribution of precipitates showed higher frequency of precipitates for RRA with optimized conditions RA1 (120 °C for 42 h + 200 °C for 60 min + 120 °C for 30 h) and RA2 (120 °C for 42 h + 240 °C for 60 min + 120 °C for 36 h).

36 MATERIALS SCIENCE↗
DOE OSTI2022

Measuring the maximum capacity and thermal resistances in phase-change thermal storage devices

Thermal energy storage can increase the efficiency of the electric grid by adding flexibility to thermal systems. The value of thermal storage is a function of its energy and power density, which are driven by the capacity and thermal resistances in the storage device. Measuring these properties in-situ at the device level is an important step to understanding the performance and improving the design of thermal storage systems. Here, we present methods to measure the total capacity and thermal resistances in heat exchangers with integrated phase change materials. These methods are demonstrated on two thermal storage devices - a 570-kWh ice-based storage tank and a 0.35-kWh graphite-tetradecane composite device. The results show how thermal resistances evolve with the state of charge and discharge rate in these devices and quantify the impact of applied pressure on the contact resistance in composite phase change material heat exchangers. The proposed method allows for easy comparison between different systems and provides information on the thermal bottlenecks limiting performance. Ultimately, these measurements will allow designers to make robust, high-performance thermal storage devices for next-generation thermal systems.

25 ENERGY STORAGE↗
DOE OSTI2019

Thermophysical and mechanical property assessment of UB 2 and UB 4 sintered via spark plasma sintering

Uranium diboride (UB 2 ) and uranium tetraboride (UB 4 ) are candidate constituents for multi-phase accident tolerant fuel due to their anticipated high thermal conductivity. These fuels have high uranium density that contributes to fission, and by tailoring the ratio of 10 B/ 11 B, can also act as an integrated burnable poison. Understanding the thermophysical and mechanical properties of uranium borides, for which only limited data are available in the literature, is of importance to determine their accident tolerance. In this work UB 2 and UB 4 have been synthesized via arc melting and sintered to high densities via spark plasma sintering (SPS). High density samples, >90% theoretical density, were used to measure the thermal diffusivity and thermal expansion of UB 2 and UB 4 and, in conjunction with specific heat literature data, their thermal conductivities were calculated from 298 to 1773 K. Additionally, resonance ultrasound spectroscopy (RUS) and nanoindentation were performed to investigate the mechanical properties of the uranium borides. Our results are discussed in the context of available literature. Both UB 2 and UB 4 exhibit thermal conductivities higher than that of UO 2 , with UB 2 having the highest. The thermal conductivity of UB 2 increases with temperature above 874 K, while for UB 4 there is a linear increase over the entire measured range. X-ray diffraction (XRD) results indicate that impurity phases were present in the fabricated materials, which could explain why literature density functional theory (DFT) results predict higher values. As a result, this suggests that if impurity phases or any microstructural defects can be eliminated then the thermal conductivity can be further increased.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Optimal beam margins in linac-based VMAT stereotactic ablative body radiotherapy: a Pareto front analysis for liver metastases

We explored the Pareto fronts mathematical strategy to determine the optimal block margin and prescription isodose for stereotactic body radiotherapy (SBRT) treatments of liver metastases using the volumetric-modulated arc therapy (VMAT) technique. Three targets (planning target volumes [PTVs] = 20, 55, and 101 cc) were selected. A single fraction dose of 26 Gy was prescribed (prescription dose [PD]). VMAT plans were generated for 3 different beam energies. Pareto fronts based on (1) different multileaf collimator (MLC) block margin around PTV and (2) different prescription isodose lines (IDL) were produced. For each block margin, the greatest IDL fulfilling the criteria (95% of PTV reached 100%) was considered as providing the optimal clinical plan for PTV coverage. Liver D{sub mean}, V7Gy, and V12Gy were used against the PTV coverage to generate the fronts. Gradient indexes (GI and mGI), homogeneity index (HI), and healthy liver irradiation in terms of D{sub mean}, V7Gy, and V12Gy were calculated to compare different plans. In addition, each target was also optimized with a full-inverse planning engine to obtain a direct comparison with anatomy-based treatment planning system (TPS) results. About 900 plans were calculated to generate the fronts. GI and mGI show a U-shaped behavior as a function of beam margin with minimal values obtained with a +1 mm MLC margin. For these plans, the IDL ranges from 74% to 86%. GI and mGI show also a V-shaped behavior with respect to HI index, with minimum values at 1 mm for all metrics, independent of tumor dimensions and beam energy. Full-inversed optimized plans reported worse results with respect to Pareto plans. In conclusion, Pareto fronts provide a rigorous strategy to choose clinical optimal plans in SBRT treatments. We show that a 1-mm MLC block margin provides the best results with regard to healthy liver tissue irradiation and steepness of dose fallout.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2025

Characterization of Gas-Phase Native(-like) Proteins Using Structures for Lossless Ion Manipulations

High-resolution mobility-based ion separations in Structures for Lossless Ion Manipulations (SLIM) have been useful for ion mobility separations for a variety of molecular classes in the gas phase. Here, in this study, we present multipass SLIM separations for gas-phase proteins in their near-native state exhibiting charge-state-dependent arrival time distributions using carbonic anhydrase (29 kDa), alcohol dehydrogenase (148 kDa), and apo-transferrin (79 kDa). The experimental CCS values were obtained from calibration curves for the arrival times of Agilent Tune Mix ions. For multipass separations, the ATDs were converted to CCS values by deconvoluting the multipass arrival times into accurate single-pass values amenable to the single-pass calibration curves. Mass spectra of carbonic anhydrase (CA) showed three different charge states (z = 9+ to 11+). Their corresponding mobility peaks were baseline-separated by using 8-m single-pass separations. When compared to the corresponding drift tube ion mobility (DTIMS) measurements, the CCS values obtained from DTIMS and SLIM were in agreement within experimental error. Single-pass analysis of alcohol dehydrogenase (ADH) exhibits three predominant charge states (z = 23+ to 25+) with mobility overlap between adjacent charge states. The mobility peak resolution for ADH improved with multipass separations (up to 24-m path length). In addition, CCS distributions obtained for charge states z = 16+ to 18+ of apo-transferrin reveal a transition from a compact unimodal form (z = 18+ and 19+) to broader multimodal CCS distributions for z = 16+. For apo-transferrin, 40-m multipass separations were performed allowing for complete isolation of the selected mobility range corresponding to z = 17+, leading to selective isolation of a narrow arrival time window. The extended mobility separations provided minimal alterations to the structure of the proteins, and the experimentally derived CCS values showed minimal change as a function of the separation time or number of passes. Mobility-based ion separations for native-like proteins, using SLIM, open opportunities for native-IMS applications as well as other manipulations enabled by SLIM-like mobility-selective isolation and collection.

charge state distribution↗
DOE OSTI2024

High-magnification Faraday rotation imaging and analysis of X-pinch implosion dynamics

An X-pinch load driven by an intense current pulse (>100 kA in ~100 ns) can result in the formation of a small radius, runaway compressional micro-pinch. A micro-pinch is characterized by a hot (>1 keV), current-driven (>100 kA), high-density plasma column (near solid density) with a small neck diameter (1–10 µm), a short axial extent (<1 mm), and a short duration (≲1 ns). With material pressures often well into the multi-Mbar regime, a micro-pinch plasma often radiates an intense, sub-ns burst of sub-keV to multi-keV x rays. A low-density coronal plasma immediately surrounding the dense plasma neck could potentially shunt current away from the neck and thus reduce the magnetic drive pressure applied to the neck. Here, to study the current distribution in the coronal plasma, a Faraday rotation imaging diagnostic (1064 nm) capable of producing simultaneous high-magnification polarimetric and interferometric images has been developed for the MAIZE facility at the University of Michigan. Designed with a variable magnification (1–10×), this diagnostic achieves a spatial resolution of ~35 µm, which is useful for resolving the ~100-μm-scale coronal plasma immediately surrounding the dense core. This system has now been used on a reduced-output MAIZE (100–200 kA, 150 ns) to assess the radial distribution of drive current immediately surrounding the dense micro-pinch neck. The total current enclosed was found to increase as a function of radius, r, from a value of ≈ 50 ± 25 kA at r ≈ 140 µm (at the edge of the dense neck) to a maximal value of ≈150 ± 75 kA for r ≥ 225 µm. This corresponds to a peak magnetic drive pressure of ≈75 ± 50 kbar at r ≈ 225 µm. The limitations of these measurements are discussed in the paper.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Chiral electronic excitations in the quasi-two-dimensional Rashba system BiTeI

The optical transitions between spin-polarized bands of the quasi-two-dimensional Rashba system BiTeI are investigated using polarization-resolved resonant Raman spectroscopy. We detect chiral excitations between states with opposite helicity and compare spectra to calculations within a three-band model. Using the resonant Raman excitation profile, we deduce the Rashba parameters and band gaps of the higher conduction bands near the Fermi level, and compare the parameters to values obtained by ab initio density functional theory.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Measurement of beam asymmetry for π – Δ ++ photoproduction on the proton at E γ = 8.5 GeV

We report a measurement of the $\pi^-$ photoproduction beam asymmetry for the reaction $\vec{\gamma} p \rightarrow \pi^- \Delta^{++}$ using data from the GlueX experiment in the photon beam energy range 8.2--8.8 GeV. The asymmetry $\Sigma$ is measured as a function of four-momentum transfer $t$ to the $\Delta^{++}$ and compared to phenomenological models. We find that $\Sigma$ varies as a function of $t$: negative at smaller values and positive at higher values of $|t|$. The reaction can be described theoretically by $t$-channel particle exchange requiring pseudoscalar, vector, and tensor intermediaries. In particular, this reaction requires charge exchange, allowing us to probe pion exchange and the significance of higher-order corrections to one-pion exchange at low momentum transfer. Constraining production mechanisms of conventional mesons may aid in the search for and study of unconventional mesons. Furthermore, this is the first measurement of the process at this energy.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Universal Location of the Yang-Lee Edge Singularity in O( N ) Theories

We determine a previously unknown universal quantity, the location of the Yang-Lee edge singularity for the O(N) theories in a wide range of N and various dimensions. At large N, we reproduce the N→∞ analytical result on the location of the singularity and, additionally, we obtain the mean-field result for the location in d=4 dimensions. In order to capture the nonperturbative physics for arbitrary N, d and complex-valued external fields, we use the functional renormalization group approach.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Many-Body Majorana Braiding without an Exponential Hilbert Space

Qubits built out of Majorana zero modes constitute the primary path toward topologically protected quantum computing. Simulating the braiding process of multiple Majorana zero modes corresponds to the quantum dynamics of a superconducting many-body system. It is crucial to study the Majorana dynamics both in the presence of all other quasiparticles and for reasonably large system sizes. We present a method to calculate arbitrary many-body wave functions as well as their expectation values, correlators, and overlaps from time evolved single-particle states of a superconductor, allowing for significantly larger system sizes. We calculate the fidelity, transition probabilities, and joint parities of Majorana pairs to track the quality of the braiding process. Here, we show how the braiding success depends on the speed of the braid. Moreover, we demonstrate the topological CNOT two-qubit gate as an example of two-qubit entanglement. Our Letter opens the path to test and analyze the many theoretical implementations of Majorana qubits. Moreover, this method can be used to study the dynamics of any noninteracting superconductor.

Majorana bound states↗
DOE OSTI2022

Diffuse X-ray scattering from polished silicon: application of the distorted wave Born approximation

Measured diffuse X-ray scattering data for a `smooth' as well as for a `rough' silicon sample were fit to theoretical expressions within the distorted wave Born approximation (DWBA). Data for the power spectral density (PSD) for both samples were also obtained by means of atomic force microscopy and optical interferometry. The Fourier transforms of trial correlation functions were fit to the PSD data and then applied to the DWBA formalism. The net correlation functions needed to fit the PSD data for each sample comprised the sum of two terms with different cutoff lengths and different self-affine fractal exponents. At zero distance these correlation functions added up to yield net values of σ 2 = (2) 2 and (71) 2 Å 2 for the smooth and rough samples, respectively. X-ray scattering data were obtained at beamline 1-BM of the Advanced Photon Source. Data and fits at values of q z = 0.05 and 0.10 Å −1 for the smooth sample are reported. Good fits for the smooth sample were obtained at both q z values simultaneously, that is, identical fitting parameters were applied at both values of q z . The smooth sample also exhibited weak Yoneda wings and a clear distinction between the strong specular scattering and the weak diffuse scattering. Data for the rough sample were qualitatively different and exhibited very weak scattering at the specular condition in contrast to extremely large Yoneda wings. Fits for the rough sample are reported for q z = 0.04, 0.05, and 0.06 Å −1 . Although the large Yoneda wings could be fit quite well in both position and amplitude, scattering near the specular condition could not be equally well fit by applying the same fitting parameters at all values of q z . Albeit imperfect, best-fitting results at the specular condition were obtained by invoking only diffuse scattering, that is, without including a separate theoretical expression for specular scattering.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2018

On/Off State Classification of a Reactor Facility Using Gas Effluence Measurements

Inferring on/off operational state of a reactor facility using measurements from an independent monitoring system is critical to the assessment of its compliance to agreements. In this paper, we consider the problem of inferring on/off state of a reactor facility using measurements of Ar-41, Cs-138, and Xe-138 gas effluence types collected at the facility’s off-gas stack. We present classifiers based on thresholding measurements of individual effluence types, and then present fusers that combine their outputs or measurements. We present five fusers based on simple majority rule, Chow’s pattern recognition function, Fisher’s combined p-value statistic, physics-based Poisson radiation counts model, and correlation coefficient method. In addition, we also test five machine learning methods based on non-linear classifiers, which are available as R packages. Finally, our results show that: (i) these gas effluence measurements are effective in inferring on/off state of a reactor facility; for example, best fusers achieve ~97% detection at ~1% false alarm rate, and (ii) fusers that combine all effluence types based on physics-based models, correlation coefficient and Fisher’s method outperform simple majority rule, Chow’s fusers and machine learning methods, as well as when they are applied to individual and pairs of effluence types.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Extracting Resilience Metrics From Distribution Utility Data Using Outage and Restore Process Statistics

Resilience curves track the accumulation and restoration of outages during an event on an electric distribution grid. We show that a resilience curve generated from utility data can always be decomposed into an outage process and a restore process and that these processes generally overlap in time. We use many events in real utility data to characterize the statistics of these processes, and derive formulas based on these statistics for resilience metrics such as restore duration, customer hours not served, and outage and restore rates. The formulas express the mean value of these metrics as a function of the number of outages in the event. We also give a formula for the variability of restore duration, which allows us to predict a maximum restore duration with 95% confidence. Overall, we give a simple and general way to decompose resilience curves into outage and restore processes and then show how to use these processes to extract resilience metrics from standard distribution system data.

24 POWER TRANSMISSION AND DISTRIBUTION↗