Search NASA⌕ Search

SEARCH · Search NASA

Results for “Visible spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Promoting the Furan Ring‐Opening Reaction to Access New Donor–Acceptor Stenhouse Adducts with Hexafluoroisopropanol

Abstract Donor–acceptor Stenhouse adducts (DASAs) are visible‐light‐responsive photoswitches with a variety of emerging applications in photoresponsive materials. Their two‐step modular synthesis, centered on the nucleophilic ring opening of an activated furan, makes DASAs readily accessible. However, the use of less reactive donors or acceptors renders the process slow and low yielding, which has limited their development. We demonstrate here that 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) promotes the ring‐opening reaction and stabilizes the open isomer, allowing greatly reduced reaction times and increased yields for known derivatives. In addition, it provides access to previously unattainable DASA‐based photoswitches and DASA–polymer conjugates. The role of HFIP and the photochromic properties of a set of new DASAs is probed using a combination of 1 H NMR and UV/Vis spectroscopy. The use of sterically hindered, electron‐poor amines enabled the dark equilibrium to be decoupled from closed‐isomer half‐lives for the first time.

Clerc, Michèle↗
DOE OSTI2020

Data from Unique Contributions of Chlorophyll and Nitrogen to Predict Crop Photosynthetic Capacity from Leaf Spectroscopy

The photosynthetic capacity or the CO2-saturated photosynthetic rate (Vmax), chlorophyll, and nitrogen are closely linked leaf traits that determine C4 crop photosynthesis and yield. Accurate, timely, rapid, and non-destructive approaches to predict leaf photosynthetic traits from hyperspectral reflectance are urgently needed for high-throughput crop monitoring to ensure food and bioenergy security. Therefore, this study thoroughly evaluated the state-of-the-art physically based radiative transfer models (RTMs), data-driven partial least squares regression (PLSR), and generalized PLSR (gPLSR) models to estimate leaf traits from leaf-clip hyperspectral reflectance, which was collected from maize (Zea mays L.) bioenergy plots with diverse genotypes, growth stages, treatments with nitrogen fertilizers, and ozone stresses in three growing seasons. The results show that leaf RTMs considering bidirectional effects can give accurate estimates of chlorophyll content (Pearson correlation r=0.95), while gPLSR enabled retrieval of leaf nitrogen concentration (r=0.85). Using PLSR with field measurements for training, the cross-validation indicates that Vmax can be well predicted from spectra (r=0.81). The integration of chlorophyll content (strongly related to visible spectra) and nitrogen concentration (linked to shortwave infrared signals) can provide better predictions of Vmax (r=0.71) than only using either chlorophyll or nitrogen individually. This study highlights that leaf chlorophyll content and nitrogen concentration have key and unique contributions to Vmax prediction.

Biomass Analytics↗
DOE OSTI2020

Unique contributions of chlorophyll and nitrogen to predict crop photosynthetic capacity from leaf spectroscopy

The photosynthetic capacity or the CO 2 -saturated photosynthetic rate (Vmax), chlorophyll, and nitrogen are closely linked leaf traits that determine C 4 crop photosynthesis and yield. Accurate, timely, rapid, and non-destructive approaches to predict leaf photosynthetic traits from hyperspectral reflectance are urgently needed for high-throughput crop monitoring to ensure food and bioenergy security. Therefore, this study thoroughly evaluated the state-of-the-art physically based radiative transfer models (RTMs), data-driven partial least squares regression (PLSR), and generalized PLSR (gPLSR) models to estimate leaf traits from leaf-clip hyperspectral reflectance, which was collected from maize (Zea mays L.) bioenergy plots with diverse genotypes, growth stages, treatments with nitrogen fertilizers, and ozone stresses in three growing seasons. The results show that leaf RTMs considering bidirectional effects can give accurate estimates of chlorophyll content (Pearson correlation r=0.95), while gPLSR enabled retrieval of leaf nitrogen concentration (r=0.85). Using PLSR with field measurements for training, the cross-validation indicates that V max can be well predicted from spectra (r=0.81). Here, the integration of chlorophyll content (strongly related to visible spectra) and nitrogen concentration (linked to shortwave infrared signals) can provide better predictions of V max (r=0.71) than only using either chlorophyll or nitrogen individually. This study highlights that leaf chlorophyll content and nitrogen concentration have key and unique contributions to V max prediction.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Growth-Controlled Broad Emission in Phase-Pure Two-Dimensional Hybrid Perovskite Films

Two-dimensional hybrid metal halide perovskites (2D perovskites) are attractive for light-emitting devices and other applications because their emission is tunable across the visible spectrum. The emission profile of 2D perovskites can be broadened via a variety of mechanisms and is further complicated by the presence of impurities. Here, the challenge of making phase-pure films in Ruddlesden–Popper phases [(A') 2 (A) n–1 B n X 3n+1 structure] is overcome by using a single A/A'-site cation, ethylammonium (EA), whose optimal size also prohibits the formation of off-target phases. In the (EA) 2 (EA) n–1 Pb n Br 3n+1 family, the low-energy, broad emission observed in bulk crystals is reduced in spin-cast, polycrystalline films. This decrease in broad emission, attributed to phonon-mediated processes, is correlated with the strain in polycrystalline films that is observed by X-ray scattering. Photothermal deflection spectroscopy shows that strain also increases the electronic disorder near the free exciton absorbance. Broad emission in films can be recovered by slowing growth kinetics, which removes the strain acquired from spin-casting and increases the domain size. Furthermore, these results help extend the utility of 2D perovskites by suggesting design rules for the growth of thin films with the targeted phase and emission.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Visible-Light-Driven Triplet Sensitization of Polycyclic Aromatic Hydrocarbons Using Thionated Perinones

Metal-free chromophores that efficiently generate triplet excited states represent enticing alternatives with respect to transition metal-containing photosensitizers, such as those featuring metal-to-ligand charge transfer excited states. Yet, such molecular constructs have remained underexplored due to the unclear relationship(s) between molecular structure and efficient/rapid intersystem crossing. In this regard, we present a series of three thionated perinone chromophores serving as a newly conceived class of heavy metal-free triplet photosensitizers. We demonstrate that thionation of the lone C=O substituent in each highly fluorescent perinone imparts red-shifted absorbance bands that maintain intense extinction coefficients across the visible spectrum, as well as unusually efficient triplet excited state formation as inferred from the measured singlet O 2 quantum yields at 1270 nm (Φ Δ = 0.78–1.0). Electronic structure calculations revealed the emergence of a low energy S 1 (n → π*) excited state in the proximity of a slightly higher energy S 2 (π → π*) excited state. The distinct character in each of the two lowest-lying singlet state manifolds resulted in the energetic inversion of the corresponding triplet excited states due to differences in electron exchange interactions. Rapid S 1 → T 1 intersystem crossing was thereby facilitated in this manner through spin–orbit coupling as predicted by the El Sayed rules. The lifetimes of the resultant triplet excited states persisted into the microsecond time regime, as measured by transient absorbance spectroscopy, enabling effective bimolecular triplet sensitization of some common polycyclic aromatic hydrocarbons. The synthetically facile interchange of a single O atom to an S atom in the investigated perinones resulted in marked changes to their photophysical properties, namely, conversion of dominant singlet state fluorescence in the former to long-lived triplet excited states in the latter. The combined results suggest a general strategy for accessing long-lived triplet excited states in organic chromophores featuring a lone C=O moiety residing within its structure, valuable for the design of metal-free triplet photosensitizers.

14 SOLAR ENERGY↗
DOE OSTI2024

A novel means to generate high pressure

Diamond anvil cells are the most popular means of generating pressures above 2 GPa. However, in many experiments, such as nuclear magnetic resonance and x-ray absorption, the metallic pressurizing gasket (which confines much of the sample) represents an occluding barrier that requires a low Z gasket material (e.g., Be), a split gasket, or other means to enable better coupling of the sample to electromagnetic radiation. In this paper, we demonstrate a novel method for generating high pressures that confines the sample just above the plane of the gasket by using a diamond with a laser hole drilled into the center of the tip. The sample is then confined by the hole, which is sealed by a flat gasket that fits over the hole. When load is applied to the diamonds, metal flows from the deformed gasket into the hole thereby pressurizing the sample similarly to how a piston pressurizes gas inside a cylinder. The pressurized sample is above the metallic gasket plane just inside the tip of the diamond, and thus easily accessible via x rays or visible light that skims just above the plane of the gasket providing an enhanced aperture of radiation collection. Furthermore, we have demonstrated the utility of this method by obtaining Raman spectra of SnC 2 O 4 and x-ray diffraction spectra of seleno-DL-cystine, all at high pressures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Mechanisms of mechanochemical synthesis of cesium lead halides: pathways toward stabilization of α-CsPbI 3

Cesium lead iodide with cubic perovskite structure (α-CsPbI 3 ) is gaining significant interest in photovoltaic applications due to its excellent absorbance of the visible solar light and other attractive optoelectronic properties. However, the synthesis of stable α-CsPbI 3 poses a significant challenge. Mechanochemical synthesis is emerging as a suitable method for the preparation of cesium lead halides. This work investigates the ball milling-induced synthesis of cesium lead halides perovskite phase using halide mixing or doping approaches. The synthesis in the CsI + PbI 2 , CsBr + PbBr 2 , CsBr + PbI 2 , and CsI + PbI 2 + NdI 3 mixtures and halide exchange reactions in the CsPbBr 3 + 3KI and CsBr + PbBr 2 + 3KI systems are investigated to elucidate the mechanism of this process. Then, CsPb(I 1–x Br x ) 3 and CsPb( 1–y )Nd y I 3 materials with different x and y ratios are prepared, and their stability is probed in the air using light absorption spectroscopy. These results suggest that Nd doping is more efficient in the stabilization of the perovskite structure than partial replacement of iodine with bromine. Microstructure observations reveal the existence of two different product formation mechanisms depending on the mechanical properties of reactants. The results reveal that the milling temperature has a significant impact on the reaction kinetics. Here, the produced particles nucleate and grow at the reactant interface and retard the synthesis reaction by creating a diffusion barrier. Extended milling reduces the product particle size and creates fresh contact between reactants, thus facilitating reaction completion.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Coherent Acoustic Interferometry during the Photodriven Oxygen Evolution Reaction Associates Strain Fields with the Reactive Oxygen Intermediate (Ti–OH*)

The oxygen evolution reaction (OER) from water requires the formation of metastable, reactive oxygen intermediates to enable oxygen–oxygen bond formation. Conversely, such reactive intermediates could also structurally modify the catalyst. Here, a descriptor for the overall catalytic activity, the first electron and proton transfer OER intermediate from water, (M–OH*), has been associated with significant distortions of the metal–oxygen bonds upon charge-trapping. Time-resolved spectroscopy of in situ, photodriven OER on transition metal oxide surfaces has characterized M–OH* for the charge trapping and the symmetry of the lattice distortions by optical and vibrational transitions, respectively, but had yet to detect an interfacial strain field arising from a surface coverage M–OH*. Here, we utilize picosecond, coherent acoustic interferometry to detect the uniaxial strain normal to the SrTiO 3 /aqueous interface directly caused by Ti–OH*. The spectral analysis applies a fairly general methodology for detecting a combination of the spatial extent, magnitude, and generation time of the interfacial strain through the coherent oscillations’ phase. For lightly n-doped SrTiO 3 , we identify the strain generation time (1.31 ps), which occurs simultaneously with Ti–OH* formation, and a tensile strain of 0.06% (upper limit 0.6%). In addition to fully characterizing this intermediate across visible, mid-infrared, and now GHz-THz probes on SrTiO 3 , we show that strain fields occur with the creation of some M–OH*, which modifies design strategies for tuning catalytic activity and provides insight into photo-induced degradation so prevalent for OER. To that end, the work put forth here provides a unique methodology to characterize intermediate-induced interfacial strain across OER catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Distinct Kinetic Signatures of Photodesorption from Metal Nanoparticles

Visible photon fluxes can influence the rate and selectivity of heterogeneously catalyzed reactions on metal nanoparticle surfaces. Models describing the influence of photon fluxes have typically introduced photon flux dependent apparent thermal kinetic parameters (reaction orders, activation energies, binding energies, etc.). This has relied on empirical fitting of reaction rate data, making mechanistic interpretations of how photon fluxes influence elementary step rates challenging and inconsistent with fundamental descriptions of photochemistry on metal surfaces developed from surface science studies. Using the CO adsorption–desorption quasi-equilibrium reaction on Pt/Al 2 O 3 catalysts as a model system, we measured steady state adsorbed CO (CO*) coverages under isothermal and isobaric (1 mbar CO) conditions as a function of temperature (473–573 K) and of 440 nm photon flux ((0.1–5.2) × 10 3 # hv Pt site –1 s –1 ) using in situ IR spectroscopy. Steady state CO* coverage on Pt was photon flux dependent with increasing photon flux causing decreasing coverage, consistent with photons driving CO* desorption rates faster than thermal CO* desorption rates. However, photon flux dependent CO* coverages were essentially temperature independent, inconsistent with models that describe photon effects using perturbations to apparent thermal kinetic parameters. Instead, 120 steady state CO* coverages as a function of temperature and photon flux are quantitatively described by a kinetic model in which the overall desorption rate is a summation of independent thermal and photon induced CO* desorption rates. Site-resolved analysis reveals distinct kinetic parameters for photon driven desorption of CO* from well-coordinated, under-coordinated, and highly under-coordinated Pt sites, with temperature-dependent apparent quantum efficiencies (AQE) consistent with temperature dependence of vibrational quanta distribution of adsorbed CO. The rigorous kinetic rate laws for independent photon and thermal driven pathways allow for predictive modeling of the influence of photon fluxes on the rates of CO* desorption under catalytic conditions. Further, the analysis provides evidence that steady state continuous wave photon fluxes can drive desorption/adsorption reactions on metal surfaces out of thermal equilibrium, reconciling surface science observations of molecular photodesorption with applied catalysis. The work establishes a general kinetic framework to be considered for photon driven processes on metals, and defines catalyst, reaction, and photon flux characteristic design principles for breaking Sabatier limitations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Title Coherent X-ray Studies of Surface Growth and Patterning Processes

X-ray Photon Correlation Spectroscopy (XPCS) is being developed as a tool to study nanoscale dynamics of fluctuations during thin film growth and surface patterning. XPCS examines the evolution of the X-ray scattering speckle pattern in reciprocal space to reveal dynamics information not accessible through any other means. Unlike low-coherence conventional X-ray scattering, which incoherently averages over different regions of a sample, coherent X-ray scattering is sensitive to the detailed structure of a given sample at that moment in time. In thin film growth processes, heterodyning, which occurs due to coherent mixing of two scattered signals, can be used to investigate the relationship between surface growth velocity and defect propagation. And, for polycrystalline thin film growth, the spatial coherence of the X-ray beam can substitute for the missing spatial coherence of the growth process to track layered growth in detail, even in a growth regime in which there are no conventional growth oscillations of the X-ray intensity. This has opened the door for detailed dynamics studies of individual atomic layers during real-world growth and patterning, not just in perfect single-crystal growth cases, which greatly expands the applicability of in-situ X-ray scattering methods. Step-flow dynamics in mounded polycrystalline growth has been studied separately for two thin film organic semiconductors deposited by thermal deposition in a vacuum environment, C60 and diindenoperylene (DIP). Highly oriented polycrystalline thin films are readily obtained in both systems, where mounds are composed of crystalline monolayer-height steps and terraces in a so-called wedding cake morphology. The formation of mounds is understood to be due to significant Ehrlich-Schwoebel step edge barriers that inhibit molecules from hopping down from one layer to the one below. The mounds exhibit local step flow, which can be monitored using coherent X-ray scattering. This is made possible due to heterodyning between scattering from the average mounds and the moving steps, which becomes visible in XPCS analysis. The effect of desorption, i.e. re-evaporation of deposited molecules is found to be important for understanding these processes. The impact of this work is to enable testing of models of step dynamics, the shape of mounds, and merging of mounds to form continuous thin films. Highly ordered polycrystalline thin films deposited on inexpensive substrates have applications in thin film solar cells and other organic electronic devices. In a separate set of experiments, speckle analysis during self-organized ion beam nanopatterning reveals memory stretching back to the beginning of patterning in the early stages and enables measurement of the velocity of self-organized patterns across surfaces providing the possibility of stringent new tests of the theory of pattern formation and motion.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A transmission hologram for slitless spectrophotometry on a convergent telescope beam. 1. Focus and resolution

We report in this paper the test of a plane holographic optical element to be used as an aberration-corrected grating for a slitless spectrograph, inserted in a convergent telescope beam. Our long-term objective is the optimization of a specific hologram to switch the auxiliary telescope imager of the Vera Rubin Observatory into an accurate slitless spectrograph, dedicated to the atmospheric transmission measurement. We present and discuss here the promising results of tests performed with prototype holograms at the CTIO $0.9\,$m telescope during a run of 17 nights in 2017 May–June. After their on-sky geometrical characterization, the performances of the holograms as aberration-balanced dispersive optical elements have been established by analysing spectra obtained from spectrophotometric standard stars and narrow-band emitter planetary nebulae. Thanks to their additional optical function, our holographic disperser prototypes allow us to produce significantly better focused spectra within the full visible wavelength domain $[370,1050]\,$nm than a regular grating, which suffers from strong defocusing and aberrations when used in similar conditions. We show that the resolution of our slitless on-axis spectrograph equipped with the hologram approaches its theoretical performance. While estimating the benefits of a hologram for the spectrum resolution, the roadmap to produce a competitive holographic element for the Vera Rubin Observatory auxiliary telescope has been established.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Hidden vibronic and excitonic structure and vibronic coherence transfer in the bacterial reaction center

We report two-dimensional electronic spectroscopy (2DES) experiments on the bacterial reaction center (BRC) from purple bacteria, revealing hidden vibronic and excitonic structure. Through analysis of the coherent dynamics of the BRC, we identify multiple quasi-resonances between pigment vibrations and excitonic energy gaps, and vibronic coherence transfer processes that are typically neglected in standard models of photosynthetic energy transfer and charge separation. We support our assignment with control experiments on bacteriochlorophyll and simulations of the coherent dynamics using a reduced excitonic model of the BRC. We find that specific vibronic coherence processes can readily reveal weak exciton transitions. While the functional relevance of such processes is unclear, they provide a spectroscopic tool that uses vibrations as a window for observing excited state structure and dynamics elsewhere in the BRC via vibronic coupling. Vibronic coherence transfer reveals the upper exciton of the “special pair” that was weakly visible in previous 2DES experiments.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Photovoltage behaviour of p-Sb 2 S 3 photocathodes for hydrogen evolution: effect of n-In 2 S 3 passivation layers

The 1.76 eV band gap of antimony(iii) sulphide (Sb 2 S 3 ) makes this semiconductor material a promising light absorber for photoelectrochemical water splitting, but scalable fabrication approaches to efficient devices are still lacking. Here we show that compact Sb 2 S 3 films on FTO can be obtained by electrochemical growth from aqueous colloidal sulphur and antimony trichloride solutions, followed by mild annealing. These films can be converted into hydrogen evolution photocathodes after coating with In 2 S 3 passivation layers and the addition of Pt proton reduction co-catalysts. For the first time, vibrating Kelvin probe surface photovoltage (VKP-SPV) spectroscopy is used to observe the carrier dynamics in such photoelectrodes. While the bare Sb 2 S 3 films suffer from high surface recombination rates and poor electron extraction, the In 2 S 3 overlayer is found to raise the photovoltage and cathodic photocurrent density, due to passivation of surface defects and formation of a p–n heterojunction. In thick In 2 S 3 films, these benefits are offset by shading and slow electron transfer. Also, we find that O 2 strongly affects the band bending in the Sb 2 S 3 –air and In 2 S 3 –air junctions and their photovoltage. The optimised devices evolve H 2 at 77.5% Faradaic efficiency and with 0.084% applied bias photon-to-current efficiency (ABPE) at 0.12 V vs. RHE. The low ABPE value is attributed to Sb 2 S 3 sub-bandgap defects visible in SPV spectra, the random orientation of Sb 2 S 3 crystallites in the films, which inhibits charge transport, the absence of crystal facets of Sb 2 S 3 , and a detrimental Schottky junction at the FTO|Sb 2 S 3 interface.

de Araújo, Moisés A. [University of California, Da↗
DOE OSTI2020

Excited Carrier Dynamics in a Dye-Sensitized Niobate Nanosheet Photocatalyst for Visible-Light Hydrogen Evolution

Dye-sensitized photocatalysts that consist of a light-absorbing dye and a wide gap oxide semiconductor have been studied extensively as components of solar energy conversion systems. Although surface modification by a metal and/or metal oxide has a significant impact on the photocatalytic efficiency, the mechanism by which these modifications increase the activity has not been fully understood. Here a dye-sensitized H 2 evolution system was constructed by using Pt-intercalated HCa 2 Nb 3 O 10 nanosheets, Ru(II) complex photosensitizers ([Ru(4,4’-(CH 3 ) 2- bpy) 2 (4,4’-(PO 3 H 2 ) 2- bpy)] 2+ and [Ru(4,4’-(CH 3 ) 2- bpy) 2 (4,4’-(CH 2 PO 3 H 2 ) 2- bpy)] 2+ , abbreviated as RuP 2+ and RuCP 2+ ; bpy = 2,2'-bipyridine), and amorphous Al 2 O 3 as building blocks. In the presence of iodide as the electron donor, the H 2 evolution rate from Pt/HCa 2 Nb 3 O 10 nanosheets sensitized by RuP 2+ was increased by modification of the nanosheets with Al 2 O 3 . On the other hand, Al 2 O 3 had a negative impact on the H 2 evolution rate when RuCP 2+ was employed. These hybrid materials were studied by transient diffuse reflectance spectroscopy and steady-state emission spectroscopy. A detailed analysis of the transient absorption profiles of the adsorbed Ru(II) complexes revealed that there are at least three states of the complexes on the nanosheet surface. The transient bleaching of the ground state absorbance had different lifetime components ranging from a few μs to several hundred μs, which mainly reflect back electron transfer rates from HCa 2 Nb 3 O 10 to the oxidized Ru(II) complexes. Here, the Al 2 O 3 modifier could inhibit not only the back electron transfer events but also electron injection from the excited state photosensitizer. Interestingly, the negative effect of Al 2 O 3 on the electron injection rate was negligible in the case of RuP 2+ , which also had a higher H 2 evolution rate. This work highlights that suppressing fast back electron transfer from Pt/HCa 2 Nb 3 O 10 to the oxidized Ru(II) complex, which occurs on a time scale of a few μs, and maximizing the electron injection efficiency are both necessary for improving dye-sensitized H 2 evolution.

14 SOLAR ENERGY↗
DOE OSTI2020

Role of Capping Agents in the Synthesis of Salicylate-Capped Zinc Oxide Nanoparticles

Capping agents are often used for controlling the size, aggregation, and properties of nanoparticles. To guide the design of improved nanomaterials for targeted performance, one can use mechanistic insights into the interactions between capping agents and nanoparticles. Here, we employ density functional theory (DFT), reactive force-field molecular dynamics (ReaxFF MD) simulations, and optical spectroscopy to study the interactions between salicylate, as a model capping agent, and zinc oxide (ZnO) nanoparticles. In this work, we find that salicylate strongly interacts with the nanoparticle via the formation of O–Zn bonds in a distorted six-membered coordination ring structure. We describe the mechanisms of capping of ZnO nanoparticles by salicylate via three different binding modes. Simulations indicate that salicylate undergoes dissociative adsorption at the highly active surface Zn sites via a hydrogen-transfer process, thereby forming a tridentate configuration. The water-mediated interaction also facilitates the dissociative adsorption, leading to two salicylate O atoms coordinating with a surface Zn atom, while the other salicylate O atom bonds with another surface Zn atom. For molecular adsorption, binding free energies indicate that salicylate binds more strongly to ZnO, often in a bidentate configuration, than water does. The formation of the salicylate–ZnO complex is substantiated by UV–visible and Fourier transform infrared spectra. We find that the C=O stretching mode of salicylate becomes softened when it interacts with the nanoparticle, suggesting chemisorption of salicylate on ZnO. Although DFT predicts strong interaction between salicylate and ZnO, ReaxFF MD simulation indicates the moderate interaction between these two components in aqueous solution. Water molecules in close contact with the nanoparticle surface undergo dissociation, thus resulting in a surface hydroxyl, a reactive oxygen species that may influence the nanoparticle’s catalytic properties. Overall, the atomic-level information provided here can guide the selection process of salicylate as an appropriate agent for ZnO nanoparticle synthesis when strong interactions of particles with capping agents are required.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Interplay of Open-Shell Spin-Coupling and Jahn–Teller Distortion in Benzene Radical Cation Probed by X-ray Spectroscopy

Here we report a theoretical investigation and elucidation of the X-ray absorption spectra of neutral benzene and of the benzene cation. The generation of the cation by multiphoton ultraviolet (UV) ionization and the measurement of the carbon K-edge spectra of both species using a table-top high-harmonic generation source are described in the companion experimental paper. We show that the 1sC → π transition serves as a sensitive signature of the transient cation formation, as it occurs outside of the spectral window of the parent neutral species. Moreover, the presence of the unpaired (spectator) electron in the π-subshell of the cation and the high symmetry of the system result in significant differences relative to neutral benzene in the spectral features associated with the 1sC → π* transitions. High-level calculations using equation-of-motion coupled-cluster theory provide the interpretation of the experimental spectra and insight into the electronic structure of benzene and its cation. The prominent split structure of the 1sC → π* band of the cation is attributed to the interplay between the coupling of the core → π* excitation with the unpaired electron in the π-subshell and the Jahn–Teller distortion. The calculations attribute most of the splitting (~1–1.2 eV) to the spin coupling, which is visible already at the Franck–Condon structure, and we estimate the additional splitting due to structural relaxation to be around ~0.1–0.2 eV. These results suggest that X-ray absorption with increased resolution might be able to disentangle electronic and structural aspects of the Jahn–Teller effect in the benzene cation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Custom NEON AOP reflectance mosaics and maps of shade masks, canopy water content

This mosaic of visible to shortwave infrared (VSWIR) data was derived from the assignable asset NEON AOP radiance data that was collected by LBNL’s Watershed Function SFA during the summer of 2018 (DOI: 10.15485/1617204). This atmospheric correction was completed to take into account site-specific terrain variability in the 334 km2 survey area centered around Crested Butte, CO. The atmospheric correction was completed using ACORN atmospheric correction software executed on 200 x 200 pixel kernels rather than line by line in order to capture local flight altitude conditions. Manual cloud delineation removed any small shaded areas that occurred within the data collection areas. Mosaics were developed based on preference for days that were in close timing proximity to the coincident ground campaign and with mosaicing criteria that minimized the angle between the sun and the sensor to retrieve the most consistent reflectance (min_phase_refl_tiled). Finally, we generated shade masks based on the geometry between the sun angle at time of flight, the ground surface, and the sensor. Here we provide the orthomosaiced estimated reflectance data (min_phase_refl_tiled.tif), canopy water content (wtrl), estimated atmospheric water vapor (wtrv), the observational data (obs) for this particular mosaic, the estimated visibility (vis), shade masks derived from the digital surface elevation model (shade) and the digital terrain model (shade_tch) added to the canopy height model (DOI: 10.15485/1617203), and a wavelength metadata file. Each image file is provided as a GeoTiff with internal tiling and LZW compression. These data can also be found on Google Earth Engine for extraction, download, and analysis of smaller extents (Google Earth Engine data is linked in external link table).

2018 NEON and 2025 CHESS Campaigns↗
DOE OSTI2021

Synthesis, structure, electronic characterization, and halogenation of gold(III) phlorin complexes

The metalation chemistry of the phlorin, which is a non-aromatic tetrapyrrole macrocycle containing a single sp 3 -hybridized meso-carbon has remained underdeveloped, as compared to that of more traditional tetrapyrroles such as porphyrins, corroles and phthalocyanines. There have been few prior efforts to prepare metallophlorins, and those that have been reported have relied on either reduction or nucleophilic attack of parent metalloporphyrins, rather than direct metalation of freebase phlorin constructs. In this work, an alternate synthetic approach for preparation of gold(III) phlorin complexes that involves the first direct metalation of two different freebase phlorin derivatives (3H(Phl tBu ) and 3H(Phl F )) with AuBr 3 to produce the stable and fully isolable gold(III) phlorin complexes Au(Phl tBu ) and Au(Phl F ) is reported. The first structural characterization of a metallophlorin bearing geminal dimethyl substituents at the sp 3 -hybridized meso-carbon via X-ray crystallography is also reported. In addition to the preparation of Au(Phl tBu ) and Au(Phl F ), the UV-vis absorption and redox properties of these two gold(III) phlorins in comparison to those of their freebase homologues is also detailed. Notably, the metallophlorins are characterized by panchromatic absorbance profiles and intense and broad bands that span the long-visible and into the near-IR regions, as well as two fully reversible oxidation and reduction waves as probed by cyclic voltammetry. Lastly, the chlorination of Au(Phl tBu ) using PhI(Cl 2 ) was probed and it was found that this regioslective reaction generates monochlorinated (Au(Phl tBu Cl)) and dichlorinated (Au(Phl tBu Cl 2 )) products, which were both structurally characterized by X-ray crystallography.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗