Search NASA⌕ Search

SEARCH · Search NASA

Results for “absorption coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Ab initio theory of free-carrier absorption in semiconductors

The absorption of light by free carriers in semiconductors results in optical loss for all photon wavelengths. Since free-carrier absorption competes with optical transitions across the band gap, it also reduces the efficiency of optoelectronic devices such as solar cells because it does not generate electron-hole pairs. In this work, we develop a first-principles theory of free-carrier absorption taking into account both single-particle excitations and the collective Drude term, and we demonstrate its application to the case of doped Si. Here, we determine the free-carrier absorption coefficient as a function of carrier concentration and we obtain excellent agreement with experimental data. We identify the dominant processes that contribute to free-carrier absorption at various photon wavelengths, and analyze the results to evaluate the impact of this loss mechanism on the efficiency of Si-based optoelectronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Saturation of the two-plasmon parametric decay instability in experiments on the electron cyclotron plasma heating due to the extraordinary pump wave depletion

The saturation level of the low-threshold parametric two-plasmon instability of the extraordinary pump wave decay to two upper hybrid plasmons is analyzed under conditions when the only efficient saturation mechanism is the pump depletion. A closed system of differential equations describing both the instability excitation and saturation is derived. The system is solved numerically and an analytic expression is obtained for the anomalous absorption coefficient of the pump wave caused by the development of this instability. The saturation level of the two-plasmon decay instability and the related anomalous absorption efficiency are estimated from data obtained in experiments on the electron cyclotron resonance heating of the plasma by an extraordinary wave in the TEXTOR tokamak.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1975

Empirical relation between interstellar X-ray absorption and optical extinction

An empirical relation between interstellar X-ray absorption and optical extinction is derived from the correlation of measurements made on objects of large intrinsic diameter. The result is Av = 4.5 times 10 to the -22nd power N(H) mag, with the principal error being largely systematic in origin, where N(H) represents the column density of interstellar matter in the Brown and Gould model for the X-ray absorption coefficient. Applying this ratio to optically identified compact sources, it is concluded that sources in binary systems showing pronounced X-ray occultations have an intrinsic absorption equivalent to about 10 to the 22-nd power atoms per sq cm of interstellar matter and that there are a few compact sources where the absorption seems to be primarily interstellar in origin. The interstellar absorption expected in Cyg X-1 from the extinction of its optical counterpart is much greater than that suggested by X-ray spectra, which may be due to a soft X-ray component greater than that predicted by the power law fitted to higher energy data.

Gorenstein, P.↗
DOE OSTI2021

Solvated Electron in Acetonitrile: Radiation Yield, Absorption Spectrum, and Equilibrium between Cavity- and Solvent-Localized States

The equilibrium between a solvent cavity-localized electron, ecav-, and a dimeric solvent anion, (CH 3 CN)$_{2}^{•-}$, which are the two lowest energy states of the solvated electron in acetonitrile, has been investigated by pulse radiolysis at 233-353 K. The enthalpy and entropy for the e$_{cav}^{-}$ to (CH 3 CN)$_{2}^{•-}$ conversion amount to -11.2 ± 0.3 kcal/mol and -39.3 ± 1.2 cal/(mol K), corresponding to a 0.44 ± 0.35 equilibrium constant at 25 °C. The radiation yield of the solvated electron has been quantified using a Co(II) macrocycle that scavenges electrons with a 1.55 × 10 11 M -1 s -1 rate constant. The apparent yield increases without saturation over the attainable scavenger concentration range, reaching 2.8 per 100 eV; this value represents the lower limit for the acetonitrile ionization yield in pulse radiolysis. The apparent molar absorption coefficient of (20.8 ± 1.5) × 10 3 M -1 cm -1 at 1450 nm and 20 °C for the solvated electron and individual vis-near-infrared (NIR) absorption spectra of e$_{cav}^{-}$ and (CH 3 CN)$_{2}^{•-}$ are derived from the data. Variances with previous reports are thoroughly discussed. All together, these results resolve several controversies concerning the solvated electron properties in acetonitrile and furnish requisite data for quantitative pulse radiolysis investigations in this commonly used solvent.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2016

Simulation of spatial distribution of absorbed laser energy in spherical microcapsules

Specific features of optical field distribution in composite spherical particles consisting of a liquid core and nanocomposite absorbing shell are theoretically studied at different wavelengths of incident radiation. Using the numerical simulation it is shown that the thickness of the shell of the spherical microcapsule particle and its intrinsic absorption coefficient determine the character of the spatial distribution and the absorbed power. The variation of these parameters allows one to change the spatial position of efficient volume absorption regions and peak absorption values. This provides favourable conditions for opening the shells in appropriate spatial zones to release the contents of the microcapsules. (interaction of laser radiation with matter)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Two-photon absorption in arsenic sulfide glasses

The two-photon absorption coefficient of 1047-nm light in As{sub 35}S{sub 65} chalcogenide glass has been measured. CW probe radiation has been used to observe the linear absorption in glass induced by two-photon excitation. The induced absorption lifetime was found to be ∼2 ms. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Combinatorial Platform for Discovery of Nanocrystal-Ink Based Earth Abundant Element PV with Efficiency Greater than 20% (Final Technical Report)

(1) We successfully developed an ultrasonic spray coating system that can be used to deposit thin chalcogenide films with composition gradients. 4 publications under the contract have been published with the instrument. The instrument was used to reveal the effects of intrinsic composition and examine the effects of 25 different dopant elements. Surprisingly, doping with most elements had little to no effect on the quasi- Fermi level splitting of bare films. A few elements were found to be detrimental including Fe, Co, and Ni. However, Li, Ge, and others were discovered to be beneficial. Ge and Li were explored in depth, and our best devices utilize lithium doping. (2) We developed a new model of absorption coefficients, that when combined with absolute intensity photoluminescence, yield the steady-state quasi-Fermi level splitting and a way to quantify the sub-bandgap absorption. This has resulted in 2 publications on the method, with another in preparation. This is a significant development that should impact other PV technologies. We have already received samples from 2 major PV companies to examine. Further, the model shows that tail states (potential fluctuations) in CZTSSe can only explain about 90 mV of loss in the open circuit voltage. (3) We found that lithium doping has several beneficial effects on CZTSSe. It improves the open-circuit voltage, short circuit current, fill factor, and shunt resistance. By using scanning Kelvin probe microscopy (SKPM) and conductive AFM (along with device measurements, DLPC, and XPS), we discovered that lithium acts to increase the p-type doping in both the grain and grain boundaries (GBs). The effect is stronger in the GBs and changes the direction of the electric field at the GB. In lithium doped devices, an electric field repels minority carrier electrons away from the GB. This resulted in a publication and the fabrication of 11.8% efficient devices from a DMSO-thiourea molecular ink. The mechanism of action is most likely due to the formation of Li Cu , which inhibits the formation of the donor defect Zn Cu . This reduces compensation and increases the net p-type doping. (4) By alloying with germanium, we have fabricated CZTGSSSe devices with the best open-circuit voltage (relative the maximum theoretical open-circuit voltage for the bandgap) for any kesterite solar cell. The Voc/Voc,max is 63%, compared to 58% for the record efficiency cell from hydrazine. The origin of the increased voltage efficiency appears to be related to the conduction band off-set and the suppression of a deep defect ($\sim$0.8 eV), most likely due to Cu Sn , but Sn Zn or Sn Cu are also possible. All milestones and go/no-go metrics were met with exception of the device efficiency milestone (15% then 20%). However, under the contract, hydrazine-free CZTSSe device efficiencies increased from 7.2% at the start of the contract to 11.8% upon completion.

14 SOLAR ENERGY↗
DOE OSTI2017

Combinatorial Platform for Discovery of Nanocrystal-Ink Based Earth Abundant Element PV with Efficiency Greater than 20%

(1) We successfully developed an ultrasonic spray coating system that can be used to deposit thin chalcogenide films with composition gradients. 4 publications under the contract have been published with the instrument. The instrument was used to reveal the effects of intrinsic composition and examine the effects of 25 different dopant elements. Surprisingly, doping with most elements had little to no effect on the quasi-Fermi level splitting of bare films. Ge and Li were explored in depth, and our best devices utilize lithium doping. (2) We developed a new model of absorption coefficients, that when combined with absolute intensity photoluminescence, yield the steady-state quasi-Fermi level splitting and a way to quantify the sub-bandgap absorption. This has resulted in 2 publications on the method, with another in preparation. This is a significant development that should impact other PV technologies. (3) We found that lithium doping has several beneficial effects on CZTSSe. It improves the open-circuit voltage, short circuit current, fill factor, and shunt resistance. By using scanning Kelvin probe microscopy (SKPM) and conductive AFM (along with device measurements, DLPC, and XPS), we discovered that lithium acts to increase the p-type doping in both the grain and grain boundaries (GBs). The effect is stronger in the GBs and changes the direction of the electric field at the GB. In lithium doped devices, an electric field repels minority carrier electrons away from the GB. This resulted in a publication and the fabrication of 11.8% efficient devices from a DMSO-thiourea molecular ink. The mechanism of action is most likely due to the formation of LiCu, which inhibits the formation of the donor defect ZnCu. This reduces compensation and increases the net p-type doping. (4) By alloying with germanium, we have fabricated CZTGSSe devices with the best open-circuit voltage (relative the maximum theoretical open-circuit voltage for the bandgap) for any kesterite solar cell. The Voc/Voc,max is 63%, compared to 58% for the record efficiency cell from hydrazine. The origin of the increased voltage efficiency appears to be related to the conduction band off-set and the suppression of a deep defect (~0.8 eV), most likely due to CuSn, but SnZn or SnCu are also possible. All milestones and go/no-go metrics were met with exception of the device efficiency milestone (15% then 20%). However, under the contract, hydrazine-free CZTSSe device efficiencies increased from 7.2% at the start of the contract to 11.8% upon completion.

14 SOLAR ENERGY↗
NASA NTRS1972

Comparison of measured and theoretical inverse bremsstrahlung and photoionization absorption of infrared radiation in a H-He plasma.

The absorption coefficients of 1.15- and 3.39-micrometer radiation for a homogeneous H-He plasma have been measured in a temperature and electron density range where the major absorption mechanisms are electron-ion inverse bremsstrahlung and neutral-atom photoionization. Measurements were made behind both the incident and reflected shock waves in a driven tube by recording the laser intensity transmitted along the tube diameter as a function of time. The measured values compare well with those obtained from theoretical calculations for a gas in thermodynamic equilibrium.

Billman, K. W.↗
NASA NTRS1973

The emission coefficient of uranium plasmas

The emission coefficient for uranium plasmas (Temperature: 8000 K) was measured for the wavelength range (200 A - 6000 A). The results are compared to theory and other measurements. The absorption coefficient for the same wavelength interval is also given.

Schneider, R. T.↗
NASA NTRS1999

A Solar Radiation Parameterization for Atmospheric Studies

The solar radiation parameterization (CLIRAD-SW) developed at the Goddard Climate and Radiation Branch for application to atmospheric models are described. It includes the absorption by water vapor, O3, O2, CO2, clouds, and aerosols and the scattering by clouds, aerosols, and gases. Depending upon the nature of absorption, different approaches are applied to different absorbers. In the ultraviolet and visible regions, the spectrum is divided into 8 bands, and single O3 absorption coefficient and Rayleigh scattering coefficient are used for each band. In the infrared, the spectrum is divided into 3 bands, and the k-distribution method is applied for water vapor absorption. The flux reduction due to O2 is derived from a simple function, while the flux reduction due to CO2 is derived from precomputed tables. Cloud single-scattering properties are parameterized, separately for liquid drops and ice, as functions of water amount and effective particle size. A maximum-random approximation is adopted for the overlapping of clouds at different heights. Fluxes are computed using the Delta-Eddington approximation.

Chou, Ming-Dah↗
NASA NTRS1988

High-resolution spectra and photoabsorption coefficients for carbon monoxide absorption bands between 94.0 nm and 100.4 nm

Photoabsorption coefficients have been measured for the CO in interstellar clouds at a resolving power more than 20 times greater than previously obtainable. In order to facilitate comparisons, these data have been integrated over the same wavelength ranges as used in Letzelter et al. (1987). It is found that most of the results obtained for bands between 94.0 and 100.4 nm are larger than those of Letzelter; the discrepancy may be attributable to the difference between the resolving powers of the spectrometers used, because the saturation effects associated with low resolution can underestimate absorption coefficient values.

Yoshino, K.↗
DOE OSTI2015

Absorption-reduced waveguide structure for efficient terahertz generation

An absorption-reduced planar waveguide structure is proposed for increasing the efficiency of terahertz (THz) pulse generation by optical rectification of femtosecond laser pulses with tilted-pulse-front in highly nonlinear materials with large absorption coefficient. The structure functions as waveguide both for the optical pump and the generated THz radiation. Most of the THz power propagates inside the cladding with low THz absorption, thereby reducing losses and leading to the enhancement of the THz generation efficiency by up to more than one order of magnitude, as compared with a bulk medium. Such a source can be suitable for highly efficient THz pulse generation pumped by low-energy (nJ-μJ) pulses at high (MHz) repetition rates delivered by compact fiber lasers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Optical response of mixed methylammonium lead iodide and formamidinium tin iodide perovskite thin films

Here, mixed tin (Sn) and lead (Pb) based perovskite thin films have been prepared by solution processing combining methylammonium lead iodide (MAPbI 3 ) and formamidinium tin iodide (FASnI 3 ) precursors. Optical response in the form of complex dielectric function (ε = ε 1 + iε 2 ) spectra and absorption coefficient (α) spectra of (FASnI 3 ) 1-x (MAPbI 3 ) x based perovskite films have been extracted over a spectral range 0.74 to 5.89 eV using spectroscopic ellipsometry. Absorption band edge energy changes as a function of composition for films including FASnI 3 , MAPbI 3 , and mixed x = 0.20, 0.35, 0.40, and 0.6 (FASnI 3 ) 1-x (MAPbI 3 ) x perovskites. (FASnI 3 ) 0.60 (MAPbI 3 ) 0.4 is found to have the minimum absorption band edge energy near ~1.2 eV.

36 MATERIALS SCIENCE↗
NASA NTRS1989

Stoichiometric effects on the optical properties of LiInSe(2)

The diffuse reflectance of LiInSe(2) between 0.67 and 3.54 eV have been measured and the Kubelka-Munk theory was used to obtain the absorption coefficient from the data. The band gap in the samples is located at approximately 1.6 eV. The In and Se content of the samples was determined from atomic absorption measurements. Absorption peaks at 0.890 and 0.896 eV have been observed which are correlated, respectively, to the selenium and indium deficiencies in the samples.

Smith, Cecily J.↗
NASA NTRS2002

Thermophysics Characterization of Multiply Ionized Air Plasma Absorption of Laser Radiation

The impact of multiple ionization of air plasma on the inverse Bremsstrahlung absorption of laser radiation is investigated for air breathing laser propulsion. Thermochemical properties of multiply ionized air plasma species are computed for temperatures up to 200,000 deg K, using hydrogenic approximation of the electronic partition function; And those for neutral air molecules are also updated for temperatures up to 50,000 deg K, using available literature data. Three formulas for absorption are calculated and a general formula is recommended for multiple ionization absorption calculation. The plasma composition required for absorption calculation is obtained by increasing the degree of ionization sequentially, up to quadruple ionization, with a series of thermal equilibrium computations. The calculated second ionization absorption coefficient agrees reasonably well with that of available data. The importance of multiple ionization modeling is demonstrated with the finding that area under the quadruple ionization curve of absorption is found to be twice that of single ionization. The effort of this work is beneficial to the computational plasma aerodynamics modeling of laser lightcraft performance.

Wang, Ten-See↗
NASA NTRS2005

Influence of a fat layer on the near infrared spectra of human muscle: quantitative analysis based on two-layered Monte Carlo simulations and phantom experiments

The influence of fat thickness on the diffuse reflectance spectra of muscle in the near infrared (NIR) region is studied by Monte Carlo simulations of a two-layer structure and with phantom experiments. A polynomial relationship was established between the fat thickness and the detected diffuse reflectance. The influence of a range of optical coefficients (absorption and reduced scattering) for fat and muscle over the known range of human physiological values was also investigated. Subject-to-subject variation in the fat optical coefficients and thickness can be ignored if the fat thickness is less than 5 mm. A method was proposed to correct the fat thickness influence. c2005 Optical Society of America.

NASA Discipline Life Sciences Technologies↗
DOE OSTI2022

A new route to obtain fluorescence X-ray absorption spectra of compounds and to remove the self-absorption induced nonlinearity in the spectra

A new route to obtain fluorescence X-ray absorption spectra of compounds and to remove the self-absorption induced nonlinearity in the spectra is described. The fluorescent intensity If is linearly proportional to the absorption coefficient μ. For studies of surface structures around an element (κ) the fluorescence detection is often the mode of choice. However, the measurement may suffer from a self-absorption (SA) effect which nonlinearly distorts the spectra. The effect is severe when κ is concentrated or the measurements are carried out in certain geometries. Here, the correlations among emission events in compounds are examined following resonance X-ray core-electron excitation within κ. Under conditions leading to SA, If emitted from κ apparently has a conjugated relationship with the fluorescent intensities simultaneously emitted from other elements (ξ). Normalizing the former (κ) by the latter (ξ) will largely remove SA effects and reduce this nonlinear problem to a tractable linear problem. This does result in a moderate reduction of the spectral amplitude due to the so-called secondary emission from ξ excited by the emission from κ. Nonetheless, the resulting spectra will allow one to accurately determine bond distances and disorder and, in some respects, can be superior to spectra obtained via the absorption channel. For μξ < μκ and grazing incidence geometry, the amplitude reduction can be small and simple normalization is sufficient to restore the spectral integrity with remarkable accuracy. This has been instrumental in unravelling the surface and subsurface structures around cations in amorphous Ga–In–O and Zn–Sn–O films which are otherwise inaccessible due to severe SA effects. This method has also been applied to several samples with μξ ≃ μκ to examine its applicability. For these samples, the amplitude reduction is 12 ± 4% versus their standards for the data measured with the classical 45°/45° geometry. This experimental method is easy to implement. Since If from κ and ξ are measured by the same detector system, it is also superior to other methods in removing systematic errors such as detector system nonlinearity, electronic noise, and some beam instabilities, and in removing spectral imperfections due to, for example, SA effects, diffraction effects and sample inhomogeneity. The distortions resulting from the latter can be severe in the spectra measured in transmission mode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗