Search NASA⌕ Search

SEARCH · Search NASA

Results for “arraying”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Net-structured Co{sub 3}O{sub 4}/C nanosheet array with enhanced electrochemical performance toward lithium storage

Graphical abstract: - Highlights: • Co{sub 3}O{sub 4}/C nanosheet array on nickel foam was synthesized by hydrothermal method, followed by magnetron sputtering of a carbon layer. • The Co{sub 3}O{sub 4}/C nanosheet array electrode delivers an initial discharge capacity of 1340.4 mAh g{sup −1} at 0.1 C. • After 100 cycles, the capacity retention of the Co{sub 3}O{sub 4}/C is 88.8% of its initial discharge capacity. • The enhanced electrochemical performances are attributed to the porous nanosheet array and the thin carbon layer coated on Co{sub 3}O{sub 4} nanosheets. - Abstract: Freestanding Co{sub 3}O{sub 4}/C nanosheet array growing directly on nickel foam substrate was synthesized using a hydrothermal approach, followed by a direct current magnetron sputtering of a thin carbon layer. The Co{sub 3}O{sub 4} nanosheets with thicknesses of 10–20 nm are interconnected with each other, forming a highly open net-structure. The Co{sub 3}O{sub 4}/C nanosheet array electrode delivers an initial discharge capacity of 1340.4 mAh g{sup −1} at 0.1 C, and maintains a high specific capacity of 912.1 mAh g{sup −1} at room temperature and can still remain 88.8% of its initial discharge capacity at 55 °C at 1 C after 100 cycles. The enhanced electrochemical performances are attributed to the porous nanosheet array and the thin carbon layer coated on Co{sub 3}O{sub 4} nanosheets, which cannot only facilitate Li{sup +} and electron transportation in the electrode, but also improve its structure stability during cycling.

36 MATERIALS SCIENCE↗

Synthesis of polyaniline shell on nickel oxide nanoflake arrays for enhanced lithium ion storage

Graphical abstract: Self-supported NiO/PANI core/shell arrays are prepared by successive electrodeposition methods and exhibit good lithium ion storage with high capacity & stable cycling life. - Highlights: • Construct self-supported porous NiO/PANI core/shell arrays. • Porous NiO/PANI composite arrays show high capacity and good cycling life. • Hierarchical porous structure is favorable for fast ion/electron transfer. - Abstract: Developing conducting polymer/oxide composites are of great importance to construct advanced electrochemical devices. In this work, we report a successive electrodeposition methods to fabricate polyaniline (PANI) on nickel oxide (NiO) nanoflake forming composite core-shell arrays. A thin layer of PANI of ∼10 nm is successfully coated on the surface of NiO nanoflake core. High porosity and enhanced conductivity are obtained in this composite electrode. As anode materials for lithium ion batteries, the NiO/PANI core-shell arrays exhibit weaker polarization and better cycling performance as compared to the bare NiO film. The second discharge capacity of NiO/PANI composite arrays is about 780 mAh g{sup −1} at 0.1 A g{sup −1}, higher than that of the bare NiO film (679 mAh g{sup −1}). The improvements of the electrochemical properties are attributed to the PANI, which forms a uniform conductive network leading to improved electrochemical performance.

36 MATERIALS SCIENCE↗

Self-supported Zn/Si core-shell arrays as advanced electrodes for lithium ion batteries

Graphical abstract: Zn/Si core-shell arrays prepared by combined hydrothermal plus sputtering method show good performance with high specific capacity and excellent cycling stability. - Highlights: • Construct Zn/Si core-shell arrays via sputtering. • The Zn/Si core-shell arrays show high capacity and good cycles. • Core-shell arrays is favorable for fast ion/electron transfer. - Abstract: Silicon is considered as the most promising substitute for the commercial graphite anode of lithium ion batteries (LIBs) due to its high capacity and low working voltage. In this work, we realize the rational combination between Zn nanorods and Si forming self-supported Zn/Si core-shell arrays with the aid of hydrothermal and sputtering methods. Amorphous Si layer is well coated on the backbone of Zn nanorods with diameters of 70–80 nm. As a preliminary test, the Zn/Si core-shell arrays are used as the anode of LIBs and demonstrated with a high initial reversible capacity of 2795 mAh g{sup −1} at 0.1C, good high-rate capability with 1985 mAh g{sup −1} at 1C and stable cycling life. The good performance is due to the highly conductive Zn nanorod network and porous core-shell structure providing good mechanical support and fast transport of ions/electrons.

36 MATERIALS SCIENCE↗

Research of sensing characteristic and dynamic measurement of graphene oxides modified flexible arrayed RuO2 chlorine ion sensor

Highlights: • Sensitivity of the flexible arrayed RuO2/GO chlorine ion sensor was improved with optimal GO concentration, which could increase the reaction area between the chlorine ion and chlorine sensing membrane. • The electrochemical impedance spectroscopy (EIS) and atomic force microscope (AFM) were utilized to explain the relationships among the electron transfer resistance, GO modified amount and sensitivity. • The 30 μL/min flow rate of dynamic measurement for flexible arrayed RuO2/0.010 wt% GO chlorine ion sensor was obtained the best sensitivity and linearity 66.673 mV/pCl and 0.998, respectively. - Abstract: In this study, we used the graphene oxide (GO) solution, in which the concentration was from 0.005 wt% to 0.500 wt%, to modify the flexible arrayed ruthenium dioxide (RuO{sub 2}) chlorine ion sensor. It is found that the flexible arrayed RuO{sub 2}/0.010 wt% GO chlorine ion sensor had the best sensitivity (44.445 mV/pCl) and the linearity was 0.971. The electrochemical impedance spectroscopy (EIS) and atomic force microscope (AFM) were utilized to explain the relationships among the electron transfer resistance, GO modified amount and sensitivity. After that, we used the flexible arrayed RuO{sub 2}/0.010 wt% GO chlorine ion sensor and the microfluidic measurement system to investigate the dynamic sensing characteristics with different flow rates from 5 μL/min to 40 μL/min. According to the experimental results, the best sensitivity and linearity of flexible arrayed RuO{sub 2}/0.010 wt% GO chlorine ion sensor were 66.673 mV/pCl and 0.992 at 30 μL/min.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NiCo2S4 nanotube arrays grown on flexible carbon fibers as battery-type electrodes for asymmetric supercapacitors

Highlights: • NiCo{sub 2}S{sub 4} nanotube arrays grew on carbon cloth through a facile two-step hydrothermal process. • The prepared NiCo{sub 2}S{sub 4} nanotube arrays were used as the supercapacitor electrode. • The asymmetric supercapacitor based NiCo{sub 2}S{sub 4} nanotube arrays possesses a superior energy density and power density. - Abstract: NiCo{sub 2}S{sub 4} nanotube arrays grown on carbon cloth are prepared successfully by a facile two-step method. The as-prepared tubular nanoarchitecture deliver a high specific capacity of 578 C/g at a galvanostatic charge-discharge current density of 0.5 A/g with good cycling stability in 3 M KOH aqueous solution. Furthermore, the all-solid-state asymmetric supercapacitor based NiCo{sub 2}S{sub 4} nanotube arrays as the positive electrode shows a superior energy density of 24.78 Wh/kg at a power density of 1770.13 W/kg. The results reveal that the as-synthesized NiCo{sub 2}S{sub 4} nanotube arrays might be promising electrode materials for electrochemical energy storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plasmonic Based Sensing Using an Array of Au-Metal Oxide Thin Films

An optical plasmonic-based sensing array has been developed and tested for the selective and sensitive detection of H2, CO, and NO2 at a temperature of 500°C in an oxygen-containing background. The three element sensing array used Au nanoparticles embedded in separate thin films of yttria stabilized zirconia (YSZ), CeO2, and TiO2. A peak in the absorbance spectrum due to a localized surface plasmon resonance (LSPR) on the Au nanoparticles was monitored for each film during gas exposures and showed a blue shift in the peak positions for the reducing gases, H2 and CO, and a red shift for the oxidizing gas NO2. A more in-depth look at the sensing response was performed using the multivariate methods of principal component analysis (PCA) analysis and linear discriminant analysis (LDA) on data from across the entire absorbance spectrum range. Qualitative results from both methods showed good separation between the three analytes for both the full array and the Au-TiO2 sample. Quantification of LDA cluster separation using the Mahalanobis distance showed better cluster separation for the array, but there were some instances with the lowest concentrations where the single Au-TiO2 film had better separation than the array. A second method to quantify cluster separation in LDA space was developed using multidimensional volume analysis of the individual cluster volume, overlapped cluster volume and empty volume between clusters. Compared to the individual sensing elements, the array showed less cluster overlap, smaller cluster volumes, and more space between clusters, all of which were expected for improved separability between the analytes.

Environmental Molecular Sciences Laboratory↗

Nanoelectrospray Emitter Arrays Providing Interemitter Electric Field Uniformity

Arrays of electrospray ionization (ESI) emitters have been reported previously as a means of achieving the enhanced ionization efficiencies. A key challenge when working with multiple, closely spaced ESI emitters is overcoming the deleterious effects caused by electrical interference among neighboring emitters. Individual emitters experience different electric fields depending on their relative position in the array, such that it becomes difficult to operate all of the emitters optimally for a given applied potential. In this work, we have developed multi-nanoESI emitters arranged with a circular pattern, which enable the constituent emitters to experience a uniform electric field. The performance of the circular emitter array was compared to a single emitter and to a previously developed linear emitter array, which verified that improved electric field uniformity was achieved with the circular arrangement. The circular arrays were also interfaced with a mass spectrometer via a matching multi-capillary inlet, and the results were compared with those obtained using a single emitter. By minimizing inter-emitter electric field inhomogeneities, much larger arrays having closer emitter spacing should be feasible.

Kelly, Ryan T.↗

Transparent Carbon Ultramicroelectrode Arrays: Figures of Merit for Quantitative Spectroelectrochemistry for Biogenic Analysis of Reactive Oxygen Species

Opaque and transparent carbon ultramicro- to nanoelectrode arrays were made using a previously reported facile versatile fabrication method (Duay et al. Anal. Chem. 2014, 86, 11528). Initially, opaque carbon ultramicroelectrode arrays (CUAs) were characterized for their analytical response to hydrogen peroxide (H 2 O 2 ) oxidation using cyclic voltammetry. The alumina blocking layer was found to contribute to the noise and thus had undesirable effects on the array’s limit of detection (LOD) for H 2 O 2 at fast scan rates. Nonetheless, at slower scan rates (ν ≤ 250 mV s –1 ), the LODs for H 2 O 2 for both opaque (O-CUAs) and transparent arrays (T-CUAs) were discovered to be lower than previously reported levels for array-based UMEs. LODs as low as 35 nM H 2 O 2 are obtained for T-CUA at a 2.5 mV s –1 scan rate. Furthermore, the transparent arrays were analyzed for their spectroelectrochemical response during the oxidation/reduction of ferrocenemethanol. Results showed very good correlation between the optical and electrochemical response for ferrocenemethanol at a UV wavelength of 254 nm. Thus, these electrodes allow for the in situ mechanistic and kinetic characterization of heterogeneous electrochemical and intermediate homogeneous chemical reactions with high electroanalytical sensitivity, low detection limits, and wide dynamic range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of Large-Area Arrays of Vertically Aligned Gold Nanorods

Anisotropic nanoparticles, such as nanorods and nanoprisms, enable packing of complex nanoparticle structures with different symmetry and assembly orientation, which result in unique functions. Despite previous extensive efforts, formation of large areas of oriented or aligned nanoparticle structures still remains a great challenge. In this paper, we report fabrication of large-area arrays of vertically aligned gold nanorods (GNR) through a controlled evaporation deposition process. We began with a homogeneous suspension of GNR and surfactants prepared in water. During drop casting on silicon substrates, evaporation of water progressively enriched the concentrations of the GNR suspension, which induces the balance between electrostatic interactions and entropically driven depletion attraction in the evaporating solution to produce large-area arrays of self-assembled GNR on the substrates. Electron microscopy characterizations revealed the formation of layers of vertically aligned GNR arrays that consisted of hexagonally close-packed GNR in each layer. Benefiting from the close-packed GNR arrays and their smooth topography, the GNR arrays exhibited a surface-enhanced Raman scattering (SERS) signal for molecular detection at a concentration as low as 10 –15 M. Because of the uniformity in large area, the GNR arrays exhibited exceptional detecting reproducibility and operability. Finally, this method is scalable and cost-effective and could lead to diverse packing structures and functions by variation of guest nanoparticles in the suspensions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Interferometric Plasmonic Lensing with Nanohole Arrays

Nonlinear photoemission electron microscopy (PEEM) of nanohole arrays in gold films maps propagating surface plasmons (PSPs) launched from lithographically patterned structures. Strong near field photoemission patterns are observed in the PEEM images, recorded following low angle of incidence irradiation of nanohole arrays with sub-15 fs laser pulses centered at 780 nm. The recorded photoemission patterns are attributed to constructive and destructive interferences between PSPs launched from the individual nanoholes which comprise the array. By exploiting the wave nature of PSPs, we demonstrate how varying the array geometry (hole diameter, pitch, and number of rows/columns) ultimately yields intense localized photoemission. Through a combination of PEEM and finite-difference time-domain simulations, we identify the optimal array geometry for efficient light coupling and interferometric plasmonic lensing. We show a preliminary application of inteferometric plasmonic lensing by enhancing the photoemission from the vertex of a gold triangle using nanohole array.

Gong, Yu↗

Frustrated supercritical collapse in tunable charge arrays on graphene

The photon-like behavior of electrons in graphene causes unusual confinement properties that depend strongly on the geometry and strength of the surrounding potential. We report bottom-up synthesis of atomically-precise one-dimensional (1D) arrays of point charges on graphene that allow exploration of a new type of supercritical confinement of graphene carriers. The arrays were synthesized by arranging F 4 TCNQ molecules into a 1D lattice on back-gated graphene, allowing precise tuning of both the molecular charge and the array periodicity. While dilute arrays of ionized F 4 TCNQ molecules are seen to behave like isolated subcritical charges, dense arrays show emergent supercriticality. In contrast to compact supercritical clusters, these extended arrays display both supercritical and subcritical characteristics and belong to a new physical regime termed "frustrated supercritical collapse". Here carriers in the far-field are attracted by a supercritical charge distribution, but their fall to the center is frustrated by subcritical potentials in the near-field, similar to trapping of light by a dense cluster of stars in general relativity.

36 MATERIALS SCIENCE↗

Enhancing sorption kinetics by oriented and single crystalline array-structured ZSM-5 film on monoliths

Abstract To enhance the reaction kinetics without sacrificing activity in porous materials, one potential solution is to utilize the anisotropic distribution of pores and channels besides enriching active centers at the reactive surfaces. Herein, by designing a unique distribution of oriented pores and single crystalline array structures in the presence of abundant acid sites as demonstrated in the ZSM-5 nanorod arrays grown on monoliths, both enhanced dynamics and improved capacity are exhibited simultaneously in propene capture at low temperature within a short duration. Meanwhile, the ZSM-5 array also helps mitigate the long-chain HCs and coking formation due to the enhanced diffusion of reactants in and reaction products out of the array structures. Further integrating the ZSM-5 array with Co 3 O 4 nanoarray enables comprehensive propene removal throughout a wider temperature range. The array structured film design could offer energy-efficient solutions to overcome both sorption and reaction kinetic restrictions in various solid porous materials for various energy and chemical transformation applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

3D Plasmon Coupling Assisted Sers on Nanoparticle-Nanocup Array Hybrids

Unique colorimetric optical properties of nanomaterials can effectively influence the light absorption or emission of molecules. Here, we design plasmonic substrate for surface-enhanced Raman scattering (SERS) by inducing three-dimensional (3D) hot spots on the sensing surface. The 3D hot spots are formed by the self-assembly of plasmonic nanoparticles (NPs) on a 3D plasmonic nanocup array structure. This 3D hot spot formation on the periodic nanocup arrays achieves much higher SERS enhancement factor than the 2D NP arrays, which have been conventionally sought SERS substrates. We also utilize the colorimetric properties of the nanocup arrays for an additional degree of SERS enhancement. Colorimetry, achieved by tunable plasmon resonance wavelength by controlling dielectric property on the nanocup array surface, eases the modulation of the plasmonic resonance condition without modifying the nanostructure design. By continuously monitoring the shifts of the plasmon resonance condition and its effect on the light absorption and emission of the nearby molecules, we verify that larger SERS enhancement is achieved when the plasmon resonance wavelength is matched with the Raman excitation wavelength. In conclusion, the ease of plasmon resonance tuning of this nanocup array-nanoparticle hybrid structure allows versatile SERS enhancement for a variety of different Raman measurement conditions.

36 MATERIALS SCIENCE↗

Design and initial operation of multichord soft x-ray detection arrays on the STOR-M tokamak

Two miniature pinhole camera arrays for spatially and temporally resolved measurements of soft x-ray emission have been designed and installed on the STOR-M tokamak. Each array consists of a photodiode array, with one array viewing vertically and one viewing horizontally through a plasma cross section. Preamplifiers with fixed gains of 10{sup 5} V/A and custom built amplifiers with variable gains are used for signal amplification. Digitizers with 14 bit resolution and 3 MS/s sampling rate are used for data acquisition. In the initial operation, an Al foil with a thickness of 1.8 {mu}m installed for one array and Be filter of 7.6 {mu}m installed for the other array are used to test signal strength. Initial tests have identified sawtooth oscillations and 20 kHz fluctuations, which are also detected by Mirnov coils, superimposed on the sawtooth oscillations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Finite size effects on the electromagnetic field enhancement from low-dimensional silver nanoshell dimer arrays

Finite size effects on the optical properties of one-dimensional 1D and two-dimensional 2Dnanoshell dimer arrays are investigated using generalized Mie theory and coupled dipoleapproximation within the context of surface-enhanced Raman spectroscopy SERS. It is shown thatthe huge enhancement in the electromagnetic EM field at the center of a given dimer oscillateswith the length of the 1D array. For an array of fixed length, the EM enhancement also oscillatesalong the array, but with a different period. Both types of oscillations can be attributed to theinterference of the dynamic dipole fields from different dimers in the array. When generalized to 2Darrays, EM enhancement higher than that of the 1D arrays can be gained with a constant magnitude,a salient feature advantageous to experimental realization of single-molecule SERS. © 2008 American Institute of Physics. DOI: 10.1063/1.3009293

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Implosion dynamics and K-shell x-ray generation in large diameter stainless steel wire array Z pinches with various nesting configurations

Nested stainless steel wire array variations were investigated on the 20 MA Z machine [R. B. Spielman et al., Phys. Plasmas 5, 2105 (1998)]. In order to reach experimentally observed electron temperatures near 3.8 keV and excite the K shell, these {approx}6.7 keV photon energy x-ray sources must be of large initial diameter (45-80 mm) which poses a concern for magnetic Rayleigh-Taylor instability growth. We discuss the implosion dynamics in these large diameter wire arrays, including an analysis of the ablation phase indicating that the prefill material is snowplowed at large radius. Nested array configurations with various mass and radius ratios are compared for instability mitigation and K-shell scaling. Degradation of the K-shell x-ray power and yield was observed for shots that did not have simultaneous implosion of the outer and inner wire arrays. Shots that were designed per this constraint exhibited K-shell yield scaling consistent with the model of J. W. Thornhill et al. [IEEE Trans. Plasma Sci. 34, 2377 (2006)] which had been benchmarked to single array results. This lends confidence to K-shell yield predictions using this model for future shots on the refurbished Z machine. Initial results employing a triple nested wire array to stabilize the large diameter implosion are also reported.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ablation dominated implosion dynamics of aluminum and stainless steel nested cylindrical wire arrays

The results of experiments with combined aluminum (Al) and stainless steel (SS) alloy 304, nested wire arrays from the 1 MA COBRA generator at Cornell University are presented. The loads studied consisted of a 6 mm diameter inner array and a 13 mm diameter outer array with a different material in each array: SS or aluminum. Al implodes before SS in all loads studied, even when Al was on the inner array. The new wire ablation dynamic model and spectroscopic modeling are used to interpret these data. The observed implosion dynamics are likely a result of the higher ablation rate of Al. These initial results suggest that combining wire materials with different ablation rates in wire array loads could be developed into a useful technique for x-ray pulse shaping and radiation yield optimization.

36 MATERIALS SCIENCE↗

Application of the Wire Ablation Dynamics Model to the Design and Optimization of Wire Array Loads of Complex Geometry

The implosion dynamics of wire array loads of complex geometry, such as nested cylindrical and planar wire arrays, is significantly affected by the uneven current distribution between the array wires, which was considered previously in the Wire Dynamics Model (WDM) simulations. The novel Wire Ablation Dynamics Model (WADM) extends the formalism of the original WDM by including the dynamics of wire ablation. The WADM simulations demonstrate that the implosions of the arrays with higher masses are more ablation dominated. The WADM simulations of the implosions dynamics of nested wire arrays have been performed for the short pulse (100 ns) and long pulse (220 ns) regimes at COBRA generator. Another factor that affects the result of the trade between the ablation and implosion time scales is the form of the current pulse, which can be very different from the classical sine-square shape. The predictions of the array implosion times by the WADM are in very good agreement with the recent experiments at the COBRA and Zebra facilities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗