Search NASA⌕ Search

SEARCH · Search NASA

Results for “atom trapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Effects of drive pulse shape on graded metal pushered single shell capsule implosions on the National Ignition Facility

Graded metal pushered single shells (PSS) are a viable alternative to low-Z capsules (Z is the atomic number) for indirect drive inertial confinement fusion implosions due to enhanced core tamping and radiation trapping, but they can be compromised by the pusher mixing with the fuel. We compare 2-shock and 3-shock laser pulses for Be/Cr PSS capsules filled with deuterium–tritium gas fuel at 6 mg/cc density. 1D radiation-hydrodynamic simulations predict higher core compression and, hence, ∼2× higher fusion yield for the 3-shock drive than for 2-shock. Nevertheless, we observe similar core ion temperatures and fusion yields for both drives. The implosion burn duration is 25% shorter and the core volume is ∼2.5× smaller for the 3-shock drive than for 2-shock, consistent with a higher compression. 1D LASNEX mix simulations using a buoyancy-drag model matching the measured yields also agree with the observed core sizes and burn durations and suggest ∼40% and ∼70% yield degradations for 2-shock and 3-shock drives due to hydrodynamic instabilities and atomic mix at the pusher–fuel interface. At the same time, 2D HYDRA simulations show that mid-mode (2–250) instability degradations are negligible for the 2-shock implosion (9%) and significant (45%) for 3-shock. Subtracting these from the 1D mix simulations, we infer similar degradations from high-mode instabilities and atomic mix for both drives. Due to its robustness to mid-mode instabilities, future pusher–gas mix studies will use the 2-shock drive.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2017

Evidence for Surface and Subsurface Ice Inside Micro Cold-Traps on Mercury's North Pole

The small obliquity of Mercury causes topographic depressions located near its poles to cast persistent shadows. Many [1, 9, 15] have shown these permanently shadowed regions (PSRs) may trap water ice for geologic time periods inside cold-traps. More recently, direct evidence for the presence of water ice deposits inside craters was remotely sensed in RADAR [5] and visible imagery [3]. Albedo measurements (reflectence at 1064 nm) obtained by the MErcury Space ENviroment GEochemistry and Ranging Laser Altimeter (MLA) found unusually bright and dark areas next to Mercury's north pole [7]. Using a thermal illumination model, Paige et al. [8] found the bright deposits are correlated with surface cold-traps, and the dark deposits are correlated with subsurface cold-traps. They suggested these anomalous deposits were brought to the surface by comets and were processed by the magnetospheric radiation flux, removing hydrogen and mixing C-N-O-S atoms to form a variety of molecules which will darken with time. Here we use a thermal illumination model to find the link between the cold-trap area fraction of a rough surface and its albedo. Using this link and the measurements obtained by MESSENGER we derive a surface and a subsurface ice distribution map on Mercury's north pole below the MESSENGER spatial resolution, approximately 500 m. We find a large fraction of the polar ice on Mercury resides inside micro cold-traps (of scales 10 - 100 m) distributed along the inter-crater terrain.

Laser Altimeter↗
DOE OSTI2022

Simulating Dynamical Phases of Chiral p + i p Superconductors with a Trapped ion Magnet

Two-dimensional p + ip superconductors and superfluids are systems that feature chiral behavior emerging from the Cooper pairing of electrons or neutral fermionic atoms with nonzero angular momentum. Their realization has been a longstanding goal because they offer great potential utility for quantum computation and memory. However, they have so far eluded experimental observation both in solid-state systems as well as in ultracold quantum gases. Here, we propose to leverage the tremendous control offered by rotating two-dimensional trapped-ion crystals in a Penning trap to simulate the dynamical phases of two-dimensional p + ip superfluids. This is accomplished by mapping the presence or absence of a Cooper pair into an effective spin-1/2 system encoded in the ions’ electronic levels. We show how to infer the topological properties of the dynamical phases, and discuss the role of beyond mean-field corrections. More broadly, our work opens the door to use trapped-ion systems to explore exotic models of topological superconductivity and also paves the way to generate and manipulate skyrmionic spin textures in these platforms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1985

Laboratory simulation of meteoritic noble gases. I - Sorption of xenon on carbon: Trapping experiments

The sorption of Xe-127 at 5 x 10 to the -7th atm onto carbon black, pyrolyzed polyvinylidene chloride, and pyrolyzed acridine at 100-1000 C for 5 min-240 h is measured experimentally by gamma spectrometry. The results are presented in tables and graphs and characterized in detail. The tightly bound Xe remaining in the samples after 4000 min pumping at temperatures above 100 C is found to comprise two components: a low-temperature component attributed to physisorption within an atomic-scale labyrinth of micropores, and a high-temperature component due to volume diffusion. The implications for the trapping of noble gases near grain surfaces of amorphous carbon in meteorites are considered.

Wacker, J. F.↗
DOE OSTI2020

Kinetics of low-temperature methane activation on IrO 2 (1 1 0): Role of local surface hydroxide species

The ability of the IrO 2 (1 1 0) surface to promote CH 4 activation at low temperatures (~150 K) suggests possibilities for developing IrO 2 -based catalysts to selectively convert light alkanes to high-value chemicals. In this study, we present experimental results and microkinetic simulations, based on density functional theory (DFT) calculations, of temperature programmed reaction spectra (TPRS) obtained for CH 4 σ-complexes adsorbed on IrO 2 (1 1 0), and focus on clarifying how surface OH groups modify the branching between CH 4 desorption, activation and subsequent reactions during TPRS. Our DFT results predict that surface OH groups strongly destabilize CH 4 σ-complexes on IrO 2 (1 1 0) in addition to deactivating surface O-atoms that are needed to achieve CH 4 activation at low temperature. We demonstrate that a microkinetic model that incorporates the influence of surface OH groups on the CH 4 binding and reactivity reproduces experimental TPRS results which show that adsorbed CH 4 σ-complexes preferentially dissociate at low CH 4 coverage, but that an increasing fraction of the adsorbed CH 4 desorbs at low temperature (~120 K) with increasing initial CH 4 or H coverage. The simulations reveal that low-temperature CH4 desorption during TPRS arises primarily from CH 4 σ-complexes that are kinetically-trapped between adjacent surface OH groups, and are thus destabilized and unable to access reactive O-atoms. In addition, when the effect of adjacent OH groups is incorporated we find that the PBE-D3 functional incorporating dispersion provides CH 4 binding energies that agree more closely with that obtained from the TPRS experiments. Overall, our results demonstrate that the local effect of adjacent OH groups must be incorporated into any microkinetic models to properly capture the selectivity between extensive and partial oxidation in alkane conversion on IrO 2 (1 1 0) under reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Antihydrogen chemistry

A survey of antimatter reactions is presented, including the formation of the antihydrogen atom and anionic, cationic, and molecular species by collisional and radiative processes. Our approach is rooted in the detailed knowledge available for many matter counterpart (hydrogenic) reactions, due to their importance in controlling early Universe chemistry. We point out that the availability of trapped antihydrogen at densities similar to those pertaining to the epoch of hydrogen chemistry will soon be available. In addition, using modern atomic physics techniques, it should be feasible to control antimatter in the laboratory to facilitate antihydrogen chemistry. Our purpose is to summarize what is known from hydrogen chemistry that is of relevance for antimatter and to indicate, based on possible reaction rates, which processes may be fruitful to pursue to create new antimatter entities as probes of fundamental symmetries. We include antihydrogen, positrons, and antiprotons in our discussion and additionally the electron due to its propensity to form positronium and perhaps to participate in certain reactions. We attempt to indicate whether further theoretical/computational work is necessary to add to the assessment of reaction rates, and we discount processes where the projected rates are too low to be of interest, given foreseeable experimental capabilities.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Quantum science with arrays of metastable helium-3 atoms

The motion of atoms in programmable optical tweezer arrays offers many new opportunities for neutral atom quantum science. These include inter- and intra-site atom motion for resource-efficient implementations of fermionic and bosonic modes, respectively, as well as tweezer transport for efficient compilation of arbitrary circuits. However, the exploitation of atomic motion for all three purposes and others is limited by the inertia of the atoms. We present a comprehensive architectural blueprint for the use of fermionic metastable helium-3 (He) atoms -- the lightest trappable atomic species -- in programmable optical tweezer arrays. This includes a concrete analysis of atomic structure considerations as well as Rydberg-mediated interactions. We show that inter-tweezer hopping of He atoms can be faster than previous demonstrations with lithium-6. We also demonstrate a new toolbox for encoding and manipulating qubits directly in the tweezer trap potential, uniquely enabled by the light mass of He. Finally, we provide several examples of new opportunities for fermionic quantum simulation and computation that leverage the transport and inter-tweezer hopping of He atom arrays. These tools present new methods to improve the resource efficiency of neutral atom quantum science that may also enable quantum simulations of lattice gauge theories and quantum chemistry outside the Born-Oppenheimer approximation

Li, Zheyuan↗
DOE OSTI2022

Evidence of Two-Source King Plot Nonlinearity in Spectroscopic Search for New Boson

Optical precision spectroscopy of isotope shifts can be used to test for new forces beyond the standard model, and to determine basic properties of atomic nuclei. We measure isotope shifts on the highly forbidden 2 S 1/2 → 2 F 7/2 octupole transition of trapped 168,170, 172, 174, 176 Yb ions. When combined with previous measurements in Yb + and very recent measurements in Yb, the data reveal a King plot nonlinearity of up to 240σ. Furthermore, the trends exhibited by experimental data are explained by nuclear density functional theory calculations with the Fayans functional. We also find, with 4.3σ confidence, that there is a second distinct source of nonlinearity, and discuss its possible origin.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Interface velocity dependent solute trapping and phase selection during rapid solidification of laser melted hypo-eutectic Al-11at.%Cu alloy

Microstructure formation of a hypo-eutectic Al-11Cu (atom percent) alloy during solidification after laser melting has been studied by transmission electron microscopy (TEM). The evolution of the solid-liquid-interface velocity, V SL , during the solidification process has been determined from direct observation by in-situ TEM. This enabled correlating V SL with development of four distinct microstructure zones. Crystal growth mode transitions from planar to cellular, cellular to dendritic, dendritic to cellular, and cellular to planar, have been observed for the accelerating solid-liquid-interface. The transition from coupled two-phase growth to the single-phase growth occurred for V SL = V a = (0.80±0.05) m/s, where V a is the velocity of absolute stability, at the onset of banded morphology grain formation. The in-situ and post-mortem TEM uniquely permitted determination of the non-equilibrium solidus for the rapidly solidifying Al-11Cu alloy. Experimental evidence for solute clustering and chemical ordering tendencies at length scales on the order of ≤ 5nm has been detected in the single-phase regions of the banded grains. The structural features of the single-phase bands have been interpreted as signatures of ‘frozen in’ configurations present in the liquid boundary layer adjacent to the growing crystal, which has a width of about 3nm. Finally, the nano-scale spatiotemporal resolution experimental TEM studies performed here provided quantitative metrics, e.g. the solidification interface velocity dependent solute concentration of the α-Al phase and the near-atomic scale structure in the single-phase bands, that are uniquely suitable for comparison with theory and model predictions for solidification microstructure development in multicomponent alloys after laser melting.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The TAMUTRAP facility: A Penning trap facility at Texas A&M University for weak interaction studies

The Texas A&M University Penning Trap (TAMUTRAP) facility aims to test the standard model of the electroweak interaction by measuring the β-ν correlation parameter, a βν , for β-delayed proton emitters in the atomic mass range 20 < A < 40. Precision measurements of this correlation parameter and, inextricably, the Fierz interference parameter, are a sensitive probe of physics beyond the standard model. Here, using off-line ion sources, the TAMUTRAP facility has been commissioned by demonstrating the ability to manipulate the trapped-ion motions as well as to perform precision mass measurements. Our novel cylindrical Penning trap – the world's largest – differs from typical designs in two key aspects: the electrode structure has an 180-mm inner diameter and an overall length of 334.89 mm leading to a uniquely small length/radius ratio l/r = 3.72; and we do not use the long end cap approximation, instead our short endcap electrodes are closed and capable of being placed at an arbitrary potential. This geometry is optimized for observing β-delayed proton decays, but is also well suited for other in-trap and post-trap precision decay experiments. In addition to presenting an overview of the TAMUTRAP facility, we demonstrate that our unique Penning trap is able to measure masses with a precision similar to typical trap designs.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Test of Causal Nonlinear Quantum Mechanics by Ramsey Interferometry with a Trapped Ion

Quantum mechanics requires the time evolution of the wave function to be linear. While this feature has been associated with the preservation of causality, a consistent causal nonlinear theory was recently developed. Interestingly, this theory is unavoidably sensitive to the full physical spread of the wave function, rendering existing experimental tests for nonlinearities inapplicable. Here, in this work, using well-controlled motional superpositions of a trapped ion, we set a stringent limit of 5.4×10 –12 on the magnitude of the unitless scaling factor $\tilde{ε}_γ$ for the predicted causal nonlinear perturbation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Identity of the reversible hole traps in InP/ZnSe core/shell quantum dots

Density functional theory calculations are combined with time-resolved photoluminescence experiments to identify the species responsible for reversible trapping of holes following photoexcitation of InP/ZnSe/ZnS core/shell/shell quantum dots (QDs) having excess indium in the shell. Several possible assignments are considered, and a substitutional indium adjacent to a zinc vacancy, In 3+ /V Zn 2- , is found to be the most likely. This assignment is consistent with the observation that trapping occurs only when the QD has excess indium and is supported by experiments showing that the addition of zinc oleate or acetate decreases the extent of trapping, presumably by filling some of the vacancy traps. We also show that addition of alkyl carboxylic acids causes increased trapping, presumably by creation of additional zinc vacancies. The calculations show that either a single In 2+ ion or an In 2+ -In 3+ dimer is much too easily oxidized to form the reversible traps observed experimentally, while In 3+ is far too difficult to oxidize. Additional experimental data on InP/ZnSe/ZnS QDs synthesized in the absence of chloride demonstrates that the reversible traps are not associated with Cl - . Furthermore, a zinc vacancy adjacent to a substitutional indium is calculated to have its highest occupied orbitals about 1 eV above the top of the valence band of bulk ZnSe, in the appropriate energy range to act as reversible traps for quantum confined holes in the InP valence band. The associated orbitals are predominantly composed of p orbitals on the Se atoms adjacent to the Zn vacancy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Formation of misfit dislocation arrays and helium nanochannels near copper surface assisted by high-temperature graphene deposition

Misfit dislocation arrays (MDAs) at semi-coherent heterogeneous interface have been demonstrated effectiveness to trap and then outgas helium (He) for alleviating void swelling in metals, but limited by atomic-level thin film deposition that is difficult to scale-up for industrial production. In this work, we proposed an innovative strategy that could generate semi-coherent homophase interfaces in a same grain by varying surface energy density assisted by high-temperature graphene (Gr) deposition. This strategy transforms strain energy and surface energy, two originally distinctive processes into successive processes, and demonstrates experimentally and theoretically by introducing {111} copper (Cu) in a {100} Cu grain. Subsequent He implantation and electrical resistivity measurement results suggest that high-density MDAs originated at this {111}/{100} interface could form stable He nanochannels near Cu surface with Gr assistance, manifesting by ultra-low increased ratio of the electrical resistivity (i.e. ~3800% of Cu vs. ~90% of Gr/Cu) after He implantation. Finally, the present findings may provide a new strategy for efficiently managing He and achieving surface protection of advanced metals, merely by depositing a super-rigid material on metal surface to greatly reduce surface energy density.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Complexity in the Photofunctionalization of Single-Wall Carbon Nanotubes with Hypochlorite

The reaction of aqueous suspensions of single-wall carbon nanotubes (SWCNTs) with UV-excited sodium hypochlorite has previously been reported to be an efficient route for doping nanotubes with oxygen atoms. Here, we have investigated how this reaction system is affected by pH level, dissolved O 2 content, and radical scavengers and traps. Products were characterized with near-IR fluorescence, Raman, and XPS spectroscopy. The reaction is greatly accelerated by removal of dissolved O 2 and strongly suppressed by TEMPO, a radical trap. Alcohols added as radical scavengers alter the reaction efficiency and the product peak emission wavelengths. Photofunctionalization with 300 nm irradiation is substantially less efficient at pH levels low enough to protonate the OCl – ion to HOCl. We deduce that in mildly treated high pH samples, the main product is sp 2 hybridized O-doped adducts formed by reaction of SWCNTs with atomic oxygen in its 3 P (ground) level. By contrast, treatment under low pH conditions leads to sp 3 hybridized SWCNT adducts formed by the addition of secondary radicals from reactions of • OH and • Cl. There is also evidence for additional photoreactions of product species under stronger irradiation. Researchers using photoexcited hypochlorite for SWCNT functionalization should be alert to the range of products and the sensitivity to reaction conditions in this system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2007

Effect of Thermospheric Neutral Density upon Inner Trapped-belt Proton Flux

We wish to point out that a secular change in the Earth's atmospheric neutral density alters charged-particle lifetime in the inner trapped radiation belts, in addition to the changes recently reported as produced by greenhouse gases. Heretofore, changes in neutral density have been of interest primarily because of their effect on the orbital drag of satellites. We extend this to include the orbital lifetime of charged particles in the lower radiation belts. It is known that the charged-belt population is coupled to the neutral density of the atmosphere through changes induced by solar activity, an effect produced by multiple scattering off neutral and ionized atoms along with ionization loss in the thermosphere where charged and neutral populations interact. It will be shown here that trapped-belt flux J is bivariant in energy E and thermospheric neutral density , as J(E,rho). One can conclude that proton lifetimes in these belts are also directly affected by secular changes in the neutral species populating the Earth s thermosphere. This result is a consequence of an intrinsic property of charged-particle flux, that flux is not merely a function of E but is dependent upon density rho when a background of neutrals is present.

Wilson, Thomas L.↗
DOE OSTI2022

Homogeneous, Micron-Scale High-Energy-Density Matter Generated by Relativistic Laser-Solid Interactions

Short-pulse, laser-solid interactions provide a unique platform for studying complex high-energy-density mat ter. We present the first demonstration of solid density, micron-scale keV plasmas uniformly heated by a high contrast, 400 nm laser at intensities up to 2×10 21 W/cm 2 . High-resolution spectral analysis of X-ray emission reveals uniform heating up to 3.0 keV over 1 µm depths. Particle-in-cell simulations indicate the production of a uniformly heated keV plasma to depths of 2 µm. The significant bulk heating and presence of highly-ionized ions deep within the target are attributed to the few MeV hot electrons that become trapped and undergo refluxing within the target sheath fields. In conclusion, these conditions enable the differentiation of atomic physics models such as ionization potential depression in high energy density environments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗