Search NASA⌕ Search

SEARCH · Search NASA

Results for “binary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

The ultraviolet spectra of four binaries observed with the S59 spectrometer

Ultraviolet spectra of Omicron And, Alpha CrB, Eta Ori A, and Alpha Vir, which were obtained with the S59 spectrometer at a resolution of 1.7 A in three 100-A-wide regions centered at 2110, 2454, and 2825 A, have been studied for the presence or absence of effects due to their binary nature. As may have been anticipated from their orbital and other characteristics, no indication of strong binary interactions were seen in these observations. However, there are certain spectral peculiarities suggesting the possibility of modifications of spectral classifications for some of these objects. A rather unusual spectral behavior in Alpha Vir is also noted. In addition, based primarily on a review of available literature, attention is drawn to a remarkable property of the third component in Eta Ori A.

Herczeg, T. J.↗
NASA NTRS1977

The binary pulsar - Post-Newtonian timing effects

Certain post-Newtonian effects may be observable in the arrival times of pulses from the binary pulsar PSR 1913+16. Such effects include the gravitational propagation delay and the post-Newtonian corrections to the elliptical binary orbit. Fitting a model of these effects as they are predicted by general relativity to the pulse arrival times permits the estimation of more parameters than are necessary to determine the orbit and masses of the system. This redundancy provides an important check of the assumption that the observed periastron precession rate is entirely due to the effect of general relativity on compact masses.

Epstein, R.↗
NASA NTRS1977

A1540-53, an eclipsing X-ray binary pulsator

An eclipsing X-ray binary pulsator consistent with the location of A1540-53 has been observed. The source pulse period was 528.93 + or - 0.10 s. The binary nature is confirmed by a Doppler curve for the pulsation period. The eclipse angle of 30.5 + or - 3 deg and the 4-hour transition to and from eclipse suggest an early-type giant or supergiant primary star.

Becker, R. H.↗
NASA NTRS1977

On the structure of contact binaries. II - Zero-age models

Zero-age models of contact binaries of roughly solar composition are constructed on the basis of contact discontinuity hypothesis. With this formulation, systems with common radiative envelopes can be constructed as well as systems with common convective envelopes. Two models with total masses, respectively, of 1.5 and 3 solar masses are presented explicitly; both binary models have a mass ratio chosen equal to 0.5. The properties of the interior structure of these models are compared with the properties of zero-age single stars which have masses corresponding to the individual components. The predictions of the theory are compared with the empirical period-color relationship found by Eggen (1961, 1967) for W Ursae Majoris stars. The agreement with observations is satisfactory.

Lubow, S. H.↗
NASA NTRS1977

Accretion flows in binary X-ray systems

Recent developments in the study of accretion flows in binary X-ray systems are reviewed, concentrating on issues concerning the gas flows rather than the radiation mechanisms. A model for Her X-1 is presented which illustrates the main structures expected to exist in the case where mass transfer is by Roche-lobe overflow and the X-ray source is a rotating magnetized neutron star. A model for Cyg X-1 is given which shows the accretion-flow structures to be expected if the compact object is a black hole, including an accretion wake and a very small accretion disk around the black hole. Physical parameters of the accretion flows in these two instances are examined along with some scale lengths that may be derived from these parameters by dimensional analysis. Detailed attention is given to neutron-star magnetospheres (for slow, intermediate, and fast rotators), accretion-disk structure, accretion from stellar winds, and the relationship between X-rays and the gas dynamics of accretion flows. It is suggested that accretion flows in binary X-ray systems be observed directly by means of high-resolution UV and X-ray spectroscopy.

Mccray, R.↗
NASA NTRS1978

Spectroscopy of the extreme-ultraviolet source Feige 24 - The binary orbit and the mass of the white dwarf

Results are reported for coude spectroscopy of the extreme-ultraviolet white dwarf Feige 24. Radial velocities of the H-alpha, He I 5876-A, and He I 6678-A emission lines, and the underlying M-dwarf absorption features, were determined from spectrograms obtained with the Lick 3-m telescope. The velocities show a binary period of 4.239(+ or - 0.0015) days. The emission-line and absorption-line velocities agree in phase, which indicates that the emission lines originate in the atmosphere of the M-dwarf secondary as a result of reprocessing of the EUV radiation. This effect is modeled, and the observed amplitude of the emission-line variability is used to place a lower limit on the orbital inclination. From these and other data it is shown that the mass of the white dwarf lies between 0.46 and 1.24 solar masses. Some possible implications for the evolution of binary stars are briefly discussed.

Thorstensen, J. R.↗
NASA NTRS1980

Single-, two-, and three-phase binary-alloy systems

Series of three computer programs solves one-dimensional transient diffusion problems in single-and multiphase binary-alloy systems. Accurate understanding of diffusion process in binary-alloy system is important for development of metal matrix composites, some protective coatings, and thin-film technology.

Tenney, D. R.↗
NASA NTRS1979

Friction and wear with a single-crystal abrasive grit of silicon carbide in contact with iron base binary alloys in oil: Effects of alloying element and its content

Sliding friction experiments were conducted with various iron-base binary alloys (alloying elements were Ti, Cr, Mn, Ni, Rh, and W) in contact with a rider of 0.025-millimeter-radius, single-crystal silicon carbide in mineral oil. Results indicate that atomic size and content of alloying element play a dominant role in controlling the abrasive-wear and -friction properties of iron-base binary alloys. The coefficient of friction and groove height (wear volume) general alloy decrease, and the contact pressure increases in solute content. There appears to be very good correlation of the solute to iron atomic radius ratio with the decreasing rate of coefficient of friction, the decreasing rate of groove height (wear volume), and the increasing rate of contact pressure with increasing solute content C. Those rates increase as the solute to iron atomic radius ratio increases from unity.

Miyoshi, K.↗
NASA NTRS1979

The friction and wear of metals and binary alloys in contact with an abrasive grit of single-crystal silicon carbide

Sliding friction experiments were conducted with various metals and iron-base binary alloys (alloying elements Ti, Cr, Mn, Ni, Rh and W) in contact with single crystal silicon carbide riders. Results indicate that the friction force in the plowing of metal and the groove height (corresponding to the wear volume of the groove) decrease linearly as the shear strength of the bulk metal increases. The coefficient of friction and groove height generally decrease, and the contact pressure increases with an increase in solute content of binary alloys. There appears to be very good correlation of the solute to iron atomic ratio with the decreasing rate of change of coefficient of friction, the decreasing rate of change of groove height and the increasing rate of change of contact pressure with increasing solute content. These rates of change increase as the solute to iron atomic radius ratio increases or decreases from unity.

Miyoshi, K.↗
NASA NTRS1979

Mass flow in close binaries - Results of optical and ultraviolet observations

Observational data provide information regarding mass flow in close binaries. Data about origin, condition, and development of circumstellar matter can also be obtained. The investigations are based on an evaluation and correlation of photometric observations and simultaneously made photoelectric and spectrographic observations in the visible spectral range and, in addition, also on satellite observations in the ultraviolet range. Supplementary information concerning the mass flow in close binaries is obtained on the basis of observations related to the X-ray, infrared, and radio range. Suitable theoretical models are employed to interpret the observational data.

Rahe, J.↗
NASA NTRS1979

Double core evolution and X-ray binaries

The evolution of a 16-solar mass star and a 1-solar mass neutron star is followed through the common-envelope binary phase. It is found that the encounter of the neutron star with a yellow giant leads to coalescence of the two cores, while encounter with a red giant leads to hydrodynamic expansion and probable ejection of the common envelope. Within the context of the two rotation laws (1) uniform rotation (investigated in the present study), and (2) uniform specific angular momentum (considered in an earlier study), the results are independent of the choice for the angular-momentum distribution in the common envelope. Implications of the results for the binary pulsar phase are discussed.

Taam, R. E.↗
NASA NTRS1980

Adhesion and friction of iron-base binary alloys in contact with silicon carbide in vacuum

Single pass sliding friction experiments were conducted with various iron base binary alloys (alloying elements were Ti, Cr, Mn, Ni, Rh, and W) in contact with a single crystal silicon carbide /0001/ surface in vacuum. Results indicate that atomic size and concentration of alloying elements play an important role in controlling adhesion and friction properties of iron base binary alloys. The coefficient of friction generally increases with an increase in solute concentration. The coefficient of friction increases linearly as the solute to iron atomic radius ratio increases or decreases from unity. The chemical activity of the alloying elements was also an important parameter in controlling adhesion and friction of alloys, as these latter properties are highly dependent upon the d bond character of the elements.

Miyoshi, K.↗
NASA NTRS1977

Evolution of weak disturbances in inert binary mixtures

The evolution of weak disturbances in inert binary mixtures is determined for the one-dimensional piston problem. The interaction of the dissipative and nonlinear mechanisms is described by Burgers' equation. The binary mixture diffusion mechanisms enter as an additive term in an effective diffusivity. Results for the impulsive motion of a piston moving into an ambient medium and the sinusoidally oscillating piston are used to illustrate the results and elucidate the incorrect behavior pertaining to the associated linear theory.

Rasmussen, M. L.↗
NASA NTRS1980

Friction and wear of iron-base binary alloys in sliding contact with silicon carbide in vacuum

Multipass sliding friction experiments were conducted with various iron base binary alloys in contact with a single crystal silicon carbide surface in vacuum. Results indicate that the atomic size and concentration of alloy elements play important roles in controlling the transfer and friction properties of iron base binary alloys. Alloys having high solute concentration produce more transfer than do alloys having low solute concentration. The coefficient of friction during multipass sliding generally increases with an increase in the concentration of alloying element. The change of friction with succeeding passes after the initial pass also increases as the solute to iron, atomic radius ratio increases or decreases from unity.

Miyoshi, K.↗
NASA NTRS1980

Computer program documentation: CYBER to Univac binary conversion user's guide

A user's guide for a computer program which will convert SINDA temperature history data from CDC (Cyber) binary format to UNIVAC 1100 binary format is presented. The various options available, the required input, the optional output, file assignments, and the restrictions of the program are discussed.

Martin, E. W.↗
NASA NTRS1979

Iron lines from X-ray binaries

A summary of the observational evidence of iron lines from satellite X-ray detectors and binary X-ray pulsars is presented. The current theories consider that the continua X-rays from X-ray pulsars originate at or near the surface of neutron stars, and they can then heat or fluoresce iron ions in surrounding physical regions to create the observed emission. Measurements of the line energy, intensity, and width, and the phase dependence of these quantities can help determine the relative importance of contributions of relative sources. The evidence is presented that the iron emission from some sources contains more than one component, and the spectra of other X-ray binaries including transients and cataclysmic variables also contain iron lines. Some implications of the observed line emission are discussed.

Pravdo, S. H.↗
NASA NTRS1979

The friction and wear of metals and binary alloys in contact with an abrasive grit of single-crystal silicon carbide

Sliding friction experiments were conducted with various metals and iron-base binary alloys (alloying elements Ti, Cr, Mn, Ni, Rh, and W) in contact with single-crystal silicon carbide riders. Results indicate that the coefficient of friction and groove height (corresponding to the wear volume) decrease linearly as the shear strength of the bulk metal increases. The coefficient of friction and groove height generally decrease with an increase in solute content of binary alloys. A separate correlation exists between the solute to iron atomic radius ratio and the decreasing rates of change of coefficient of friction and groove height with increasing solute content. These rates of change are minimum at a solute to iron radius ratio of unity. They increase as the atomic ratio increases or decreases linearly from unity. The correlations indicate that atomic size is an important parameter in controlling friction and wear of alloys.

Miyoshi, K.↗
NASA NTRS1980

Soft X-ray observations of the binary sigma Cr B with HEAO-1

The detection of X-ray emission in the 0.15-2 keV band from the vicinity of the radio-emitting binary star HD 146361 in the binary system sigma-Corona Borealis, with low-energy detectors of the HEAO A-2 experiment, is reported. Graphs are presented that show plots of count rate versus scan angle in half-degree bins, that are obtained from the superposition of the 13 source scans. Attention is given to source position and identification as well as to the energy spectrum of the source.

Agrawal, P. C.↗