Search NASA⌕ Search

SEARCH · Search NASA

Results for “bulk modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Symmetrization of Strong Hydrogen Bond under High Pressure in Bihydroxide-Ion-Containing NaCu 2 (SO 4 ) 2 ·H 3 O 2 Revealed by Experimental Charge Density, Single-Crystal Electron Diffraction, and Neutron Diffraction Studies

In minerals and inorganic compounds, strong hydrogen bonding can lead to the formation of complex ionic species such as the H 3 O 2 – bihydroxide anion and Zundel cation H 5 O 2 + . We studied [NaCu 2 (SO 4 ) 2 ·H 3 O 2 ] natrochalcite, which contains bihydroxide anions and undergoes hydrogen bond symmetrization at the lowest pressure reported so far among inorganic compounds. Hydrogen bond symmetrization leads to changes in the bulk modulus, seismic wave velocities, and proton mobility and plays a primary role in high-temperature superconductivity, but its characteristics are not well understood due to a lack of systematic studies and limitations of experimental methods sensitive to this subtle change. In this work, we applied experimental charge density analysis based on in situ single-crystal X-ray diffraction data, along with the single-crystal neutron and electron diffraction experiments, to probe the behavior of hydrogen atoms during the hydrogen bond symmetrization process under high-pressure conditions. On the way to the symmetrical H-bonding, natrochalcite undergoes a series of complex redistributions of electron density, which we trace with multipole refinement and detailed analysis of changes in the Laplacian of electron density values. Additionally, we deconvoluted the equation of state (volume of the unit cell vs pressure relation) into the atomic equation of states describing dependencies of atomic charges or volumes vs pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Porosity Dependence of Compression and Lattice Rigidity in Metal–Organic Framework Series

Porous materials, including metal-organic frameworks (MOFs), are known to undergo structural changes when subjected to applied hydrostatic pressures that are both fundamentally interesting and practically relevant. With the rich structural diversity of MOFs, the development of design rules to better understand and enhance the mechanical stability of MOFs is of paramount importance. In this work, the compressibilities of seven MOFs belonging to two topological families (representing the most comprehensive study of this type to date) were evaluated using in situ synchrotron X-ray powder diffraction of samples within a diamond anvil cell. The judicious selection of these materials, representing widely studied classes of MOFs, provides broadly applicable insight into the rigidity and compression of hybrid materials. An analysis of these data reveals that the bulk modulus depends on several structural parameters (e.g., void fraction and linker length). Furthermore, we find that lattice distortions play a major role in the compression of MOFs. As a result, this study is an important step toward developing a predictive model of the structural variables that dictate the compressibility of porous materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Phase Transitions in the Potential Hydrogen Storage Compound KBH[subscript 4] under Compression

Angle-dispersive high-pressure powder X-ray diffraction, high-pressure Raman, and ab initio density functional theoretical (DFT) calculations were performed on KBH{sub 4} up to 20 GPa. We demonstrate that KBH{sub 4} exhibits structural phase transitions from the ambient {alpha}-KBH{sub 4} phase (cubic Fm{sub 3}m) to {beta}-KBH{sub 4} (tetragonal P42{sub 1}c) at 3.8 GPa and to the {gamma}-KBH{sub 4} phase (orthorhombic Pnma) at 6.8 GPa, which is similar to the phase transition sequence observed for NaBH{sub 4} earlier. The transition pressure and bulk modulus obtained for KBH{sub 4} in our experiments are in good agreement with theoretical calculations. The results further show that the ambient pressure phase of this hydride is reversible.

08 HYDROGEN↗

Static Compression of Tetramethylammonium Borohydride

Raman spectroscopy and synchrotron X-ray diffraction are used to examine the high-pressure behavior of tetramethylammonium borohydride (TMAB) to 40 GPa at room temperature. The measurements reveal weak pressure-induced structural transitions around 5 and 20 GPa. Rietveld analysis and Le Bail fits of the powder diffraction data based on known structures of tetramethylammonium salts indicate that the transitions are mediated by orientational ordering of the BH{sub 4}{sup -} tetrahedra followed by tilting of the (CH{sub 3}){sub 4}N{sup +} groups. X-ray diffraction patterns obtained during pressure release suggest reversibility with a degree of hysteresis. Changes in the Raman spectrum confirm that these transitions are not accompanied by bonding changes between the two ionic species. At ambient conditions, TMAB does not possess dihydrogen bonding, and Raman data confirms that this feature is not activated upon compression. The pressure-volume equation of state obtained from the diffraction data gives a bulk modulus [K{sub 0} = 5.9(6) GPa, K'{sub 0} = 9.6(4)] slightly lower than that observed for ammonia borane. Raman spectra obtained over the entire pressure range (spanning over 40% densification) indicate that the intramolecular vibrational modes are largely coupled.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bond-Order Potential for Erbium-Hydride System

Interatomic potentials for an Er-H system are derived based on an analytical bond-order scheme. The model potentials provide a good description of the bulk properties and defect properties of hcp-Er, including lattice parameter, cohesive energy, elastic constants, point defect formation energies, surface and stacking fault energies. In addition to experimental data, a DFT method is used to construct the necessary database of different phases. We demonstrate that such potentials can reproduce the hydrogen behaviour in an alpha-phase Er-H system for a low hydrogen/metal ratio. Especially, the present potentials can be employed for modelling the energetics and structural properties of fcc ErH2, including lattice parameters, elastic constants, bulk modulus, Young's modulus and shear modulus, as well as the formation energies and migration barriers of point defects in ErH2.

08 HYDROGEN↗

Compression and Probing C−H···I Hydrogen Bonds of Iodoform under High Pressure by X-ray Diffraction and Raman Scattering

High-pressure methods were applied to investigate the structural stability and hydrogen bonding of polar molecules of iodoform by synchrotron radiation X-ray diffraction and Raman spectra measurements, respectively. Up to a pressure of 40 GPa, no phase transitions were observed. The discontinuous frequency shift of the C-H stretching band is believed to be related to the enhancement of the C-H{hor_ellipsis}I weak hydrogen bonds under high pressures. Ab initio calculations were performed, and the results predict the frequency shift of the C-H stretching vibration as C-H{hor_ellipsis}I interacts via hydrogen bonding. The bulk modulus is 17.3 {+-} 0.8 GPa, with a pressure derivative of 5.2.

08 HYDROGEN↗

Synchrotron X-ray Diffraction and Infrared Spectroscopy Studies of C60H18 Under High Pressure

In situ high-pressure angle-dispersive synchrotron X-ray diffraction and high-pressure mid-infrared (IR) spectrum measurements of C{sub 60}H{sub 18} were carried out up to 32 and 10.2 GPa, respectively. Our diffraction data indicated that the fcc structure of C{sub 60}H{sub 18} was stable up to 32 GPa. The bulk modulus B{sub 0} was determined to be 21 {+-} 1.16 GPa, about 40% higher than that of C{sub 60}. The C-H vibrations still existed up to 10.2 GPa, and the vibrational frequencies decreased with increasing pressure. IR-active vibrational frequencies and their corresponding eigenvectors of C{sub 60}H{sub 18} were simulated by DMOL{sup 3}. The effects of the hydrogen atoms attached to the fullerene molecular cage on the stability of the structure under high pressure are discussed.

08 HYDROGEN↗

Structure and behavior of the barringerite Ni end-member, Ni[subscript 2]P, at deep Earth conditions and implications for natural Fe-Ni phosphides in planetary cores

High pressure and high temperature behavior of synthetic Ni{sub 2}P has been studied in a laser-heated diamond anvil cell up to 50 GPA and 2200 K. Incongruent melting associated with formation of pyrite-type NiP{sub 2} and amorphous Ni-P alloy was found at an intermediate pressure range, between 6.5 and 40 GPa. Above GPa, Ni{sub 2}P melts congruently. At room conditions, Ni{sub 2}P has hexagonal C22-type structure, and without heating it remains in this structure to at least 50 GPa. With a bulk modulus K{sub 0} = 201(8) GPa and K' = 4.2(6), Ni{sub 2}P is noticeable less compressible than hcp Fe, as well as all previously described iron phosphides, and its presence in the Earth core would favorable lower the core density. In contrast to Fe{sub 2}P, the c/a ratio in Ni{sub 2}P decreases on compression because of the lack of ferromagnetic interaction along the c direction. Lack of the C22{yields}C23 transition in the Ni{sub 2}P rules out a stabilizing effect of Ni on the orthorhombic phase of natural (Fe{sub 1-x}Ni{sub x}){sub 2}P allabogdanite.

58 GEOSCIENCES↗

Siderite at lower mantle conditions and the effects of the pressure-induced spin-pairing transition

Siderite (FeCO{sub 3}) forms a complete solid solution with magnesite (MgCO{sub 3}), the most likely candidate for a mantle carbonate. Our experiments with natural siderite reveal spin pairing of d-orbital electrons of Fe{sup 2+} at 43 GPa, as evidenced by a sharp volume collapse of about 10%. The initially colorless crystals assume an intense green color after the transition, which progressively turns to red above 60 GPa. We present clear evidence for the instability of an intermediate spin state in siderite at ambient temperature. At the transition pressure, domains of high and low spin siderite coexist. The unit cell volume difference between magnesite and siderite is significantly decreased by the spin transition, enhancing the solubility between the two calcite-type minerals. A siderite component in magnesite at lower mantle pressure would significantly increase its density and slightly increase the carbonate bulk modulus.

58 GEOSCIENCES↗

Thermoelastic Properties of Eclogitic Garnets and Omphacites: Implications for Deep Subduction of Oceanic Crust and Density Anomalies in the Upper Mantle

In this work, synchrotron-based high-pressure/high-temperature single-crystal X-ray diffraction experiments to ~24 GPa and 700 K were conducted on eclogitic garnets (low-Fe: Prp 28 Alm 38 Grs 33 Sps 1 and high-Fe: Prp 14 Alm 62 Grs 19 Adr 3 Sps 2 ) and omphacites (low-Fe: Quad 57 Jd 42 Ae 1 and high-Fe: Quad 53 Jd 27 Ae 20 ), using an externally heated diamond anvil cell. Fitting the pressure-volume-temperature data to a third-order Birch-Murnaghan equation of state yields the thermoelastic parameters including bulk modulus ($K_{T0}$), its pressure derivative ($K'_{T0}$), temperature derivative (($∂K_T/∂T)_P$), and thermal expansion coefficient ($α_T$). The densities of the high-Fe and low-Fe eclogites were then modeled along typical geotherms of the normal mantle and the subducted oceanic crust to the transition zone depth (550 km). The metastable low-Fe eclogite could be a reason for the stagnant slabs within the upper range of the transition zone. Eclogite would be responsible for density anomalies within 100–200 km in the upper mantle of Asia.

58 GEOSCIENCES↗

Ultrasonic Velocity of Diopside Liquid at High Pressure and Temperature: Constraints on Velocity Reduction in the Upper Mantle Due to Partial Melts

Sound velocities of diopside liquid were determined at high pressures and temperatures up to 3.8 GPa and 2375 K, using the ultrasonic technique combined with synchrotron X–ray diffraction and imaging in a multianvil apparatus. Our results show that the sound velocity increases with pressure but is nearly independent of temperature. Using a Monte Carlo approach, the measured high–pressure sound velocities combined with ambient–pressure density provide tight constraints for the equation of state of diopside liquid, with a best–fit adiabatic bulk modulus (K S ) of 23.8 ± 0.4 GPa and its pressure derivative (K S ') of 7.5 ± 0.5. The calculated adiabatic temperature and density profile of diopside liquid suggest that a melt layer with diopside composition in the upper mantle would be gravitationally unstable and start to crystallize from the bottom of the layer during cooling. By comparing our results with previous acoustic measurements on silicate glasses, we demonstrate the important differences in sound velocities between silicate liquids and glasses and conclude that silicate glasses may not work as a good analog material for studying the acoustic properties of silicate liquids, as measurements on unrelaxed glasses do not capture the entropic contribution to the compressional properties of liquids. Here, we modeled velocity reductions due to partial melts in the upper mantle using our results and found that for a given velocity reduction, the deeper the low–velocity region, the larger the melt fraction is required. Using silicate glass data for such estimation would result in a significant underestimation of melt fractions at high pressures.

58 GEOSCIENCES↗

Spin Transitions and Compressibility of ε-Fe 7 N 3 and γ'-Fe 4 N: Implications for Iron Alloys in Terrestrial Planet Cores

Iron nitrides are possible constituents of the cores of Earth and other terrestrial planets. Pressure-induced magnetic changes in iron nitrides and effects on compressibility remain poorly understood. In this work, we report synchrotron X-ray emission spectroscopy (XES) and X-ray diffraction (XRD) results for ε-Fe 7 N 3 and γ'-Fe 4 N up to 60 GPa at 300 K. The XES spectra reveal completion of high- to low-spin transition in ε-Fe 7 N 3 and γ'-Fe 4 N at 43 and 34 GPa, respectively. The completion of the spin transition induces stiffening in bulk modulus of ε-Fe 7 N 3 by 22% at ~40 GPa, but has no resolvable effect on the compression behavior of γ'-Fe 4 N. Fitting pressure-volume data to the Birch-Murnaghan equation of state yields V 0 = 83.29 ± 0.03 (Å 3 ), K 0 = 232 ± 9 GPa, K 0 ' = 4.1 ± 0.5 for nonmagnetic ε-Fe 7 N 3 above the spin transition completion pressure, and V 0 = 54.82 ± 0.02 (Å 3 ), K 0 = 152 ± 2 GPa, K 0 ' = 4.0 ± 0.1 for γ'-Fe 4 N over the studied pressure range. By reexamining evidence for spin transition and effects on compressibility of other candidate components of terrestrial planet cores, Fe 3 S, Fe 3 P, Fe 7 C 3 , and Fe 3 C based on previous XES and XRD measurements, we located the completion of high- to low-spin transition at ~67, 38, 50, and 30 GPa at 300 K, respectively. The completion of spin transitions of Fe 3 S, Fe 3 P, and Fe 3 C induces elastic stiffening, whereas that of Fe 7 C 3 induces elastic softening. Changes in compressibility at completion of spin transitions in iron-light element alloys may influence the properties of Earth's and planetary cores.

58 GEOSCIENCES↗

Seismic Anisotropy of Temperate Ice in Polar Ice Sheets

Here we present a series of simple shear numerical simulations of dynamic recrystallization of two-phase nonlinear viscous materials that represent temperate ice. First, we investigate the effect of the presence of water on the resulting microstructures and, second, how water influences on P wave (V p ) and fast S wave (V s ) velocities. Regardless the water percentage, all simulations evolve from a random fabric to a vertical single maximum. For a purely solid aggregate, the highest V p quickly aligns with the maximum c-axis orientation. At the same time, the maximum c-axis development reduces V s in this orientation. When water is present, the developed maximum c-axis orientation is less intense, which results in lower V p and V s . At high percentage of water, V p does not align with the maximum c-axis orientation. If the bulk modulus of ice is assumed for the water phase (i.e., implying that water is at high pressure), we find a remarkable decrease of V s while V p remains close to the value for purely solid ice. These results suggest that the decrease in V s observed at the base of the ice sheets could be explained by the presence of water at elevated pressure, which would reside in isolated pockets at grain triple junctions. Under these conditions water would not favor sliding between ice grains. However, if we consider that deformation dominates over recrystallization, water pockets get continuously stretched, allowing water films to be located at grain boundaries. This configuration would modify and even overprint the maximum c-axis-dependent orientation and the magnitude of seismic anisotropy.

58 GEOSCIENCES↗

High‐Pressure and High‐Temperature Single‐Crystal Elasticity of Cr‐Pyrope: Implications for the Density and Seismic Velocity of Subcontinental Lithospheric Mantle

Abstract Single‐crystal X‐ray diffraction and Brillouin spectroscopy experiments were performed on a natural Cr‐pyrope (Prp 71.0 Alm 12.6 Sps 0.7 Grs 3.5 Uvr 12.2 ) at high pressure and high temperature up to 11.0 GPa and 800 K. Fitting the collected data to the third‐order finite strain equation yields bulk modulus ( K S 0 ), shear modulus ( G 0 ), their pressure ((∂ K S /∂ P ) T and (∂ G /∂ P ) T ) and temperature (( ∂K S /∂T ) P and ( ∂G/∂T ) P ) derivatives, K S 0 = 167.7(8) GPa, G 0 = 91.5(5) GPa, (∂ K S /∂ P ) T = 4.3(1), (∂ G /∂ P ) T = 1.4(1), ( ∂K S /∂T ) P = − 0.0175(1) GPa/K and ( ∂G/∂T ) P = − 0.0073(1) GPa/K. Using the obtained results, we examined whether the elastic properties of the Cr‐pyrope can be accurately calculated from those of endmembers including pyrope, almandine, grossular, and uvarovite assuming a linear relationship between elastic properties and composition (end‐member model). The results indicate that the end‐member model provides a sufficient approximation for the elastic properties of Cr‐pyrope in calculating the density and velocity of the subcontinental lithospheric mantle (SCLM). We modeled the densities and velocities of three typical types of SCLM (Archon, Proton, and Tecton) in order to investigate how the variation of chemical composition influences the SCLM. We obtained that the compositional change from the Archon to the Tecton increases the density of the SCLM significantly, which can be an important prerequisite for SCLM delamination. However, the compositional variation only slightly changes the velocity of the SCLM and the change is within the uncertainty of the calculation. Moreover, in comparison to the velocity, ρ / V P and ρ / V S are much more sensitive to the compositional change of the SCLM.

Xu, Jingui↗

The Post‐Perovskite Transition in Fe‐ and Al‐Bearing Bridgmanite: Effects on Seismic Observables

Abstract The primary phase of the Earth’s lower mantle, (Al, Fe)‐bearing bridgmanite, transitions to the post‐perovskite (PPv) phase at Earth’s deep mantle conditions. Despite extensive experimental and ab initio investigations, there are still important aspects of this transformation that need clarification. Here, we address this transition in (Al 3+ , Fe 3+ )‐, (Al 3+ )‐, (Fe 2+ )‐, and (Fe 3+ )‐bearing bridgmanite using ab initio calculations and validate our results against experiments on similar compositions. Consistent with experiments, our results show that the onset transition pressure and the width of the two‐phase region depend distinctly on the chemical composition: (a) Fe 3+ ‐, Al 3+ ‐, or (Al 3+ , Fe 3+ )‐alloying increases the transition pressure, while Fe 2+ ‐alloying has the opposite effect; (b) in the absence of coexisting phases, the pressure‐depth range of the Pv‐PPv transition is likely too broad to cause a sharp D” discontinuity (<30 km); (c) the average Clapeyron slope of the two‐phase regions are consistent with previous measurements, calculations in MgSiO 3 , and inferences from seismic data. In addition, (d) we observe a softening of the bulk modulus in the two‐phase region. The consistency between our results and experiments gives us the confidence to proceed and examine this transition in aggregates with different compositions computationally, which will be fundamental for resolving the most likely chemical composition of the D" region by analyses of tomographic images.

Geochemistry & Geophysics↗