Search NASA⌕ Search

SEARCH · Search NASA

Results for “coherent diffraction microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

X-ray Diffraction Spectra in Cu-Implanted SiO{sub 2} Films on Si(100) Substrates

Cu-implanted SiO{sub 2} films on Si(100) have been studied using x-ray methods and x-ray diffraction pattern processing. The x-ray results indicate the presence of a preferred orientation for Cu {l_brace}111{r_brace} planes parallel to the substrate surface without directional orientation for Cu-implanted SiO{sub 2}/Si(100) and nano-crystalline-Cu/SiO{sub 2}/Si(100)(ie. after implanted and annealed Cu). The x-ray diffraction spectra of the Cu-implanted and nano-crystalline-Cu phases were analyzed (ie. in terms of peak search, profile fit, crystallite size) and compared to data from complimentary techniques (RBS, TEM). Results are discussed with respect to x-ray spectral lines shapes derived from XRD spectra processing and the nanostructure problem.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth And Gas Sensing Properties Of Dielectrophoretically Isolated CuO-W{sub 18}O{sub 49} Heterostructures

Hierarchical heterostructures consisting of W{sub 18}O{sub 49} nanowires grown on CuO nanowires have been prepared and studied for their gas sensing properties. SEM images show that W{sub 18}O{sub 49} initially grow as an shell over core CuO nanowire with protusion like branches whose thickness depends on oxygen partial pressure. These CuO:W{sub 18}O{sub 49} structures were dielectrophoretically isolated and studied for their gas sensing properties. The results show potential of use of tailored hierarchical heterostructures for the fabrication of gas sensors.

36 MATERIALS SCIENCE↗

Charge Transport Characteristics Of Cobalt Phthalocyanine Thin Films Grown By Molecular Beam Epitaxy

In the recent times organic semiconductors (OSC) have received attention because of their application in low-cost, flexible, and large area electronics devices. The application of OSC thin films has been limited due to their low charge carrier mobility ({approx}0.1 cm{sup 2}/V-s). We have investigated the effect of substrate on structure and charge transport characteristics of cobalt phthalocyanine (CoPc) films. Thin films have been grown on both single crystal (sapphire and LaAlO{sub 3}) and amorphous (quartz) substrates using molecular beam epitaxy system. The films grown on LaAlO{sub 3} substrates exhibited a higher value of mobility ({approx}4 cm{sup 2}/V-s) while those grown on Al{sub 2}O{sub 3} and quartz showed mobility value of {approx}1 cm{sup 2}/V-s. High mobility for LaAlO{sub 3} substrates has been attributed to the enhanced ordering of the molecules due to natural twin boundaries of substrates. In order to further confirm role of grain boundaries in aligning the CoPc molecules, we measured the charge transport on films deposited at bi-crystal SrTiO{sub 3} substrates. The results showed that current along bi-crystal grain boundary is three orders of magnitude higher than for films on SrTiO{sub 3} substrate without grain boundary, which confirms our hypothesis of ordering of molecules along grain boundaries.

36 MATERIALS SCIENCE↗

HVOF coatings of Diamalloy 2002 and Diamalloy 4010 onto steel: Tensile and bending response of coatings

HVOF coating of Diamalloy 2002 powders and Diamalloy 4010 powders as well as two-layered coatings consisting of these powders is carried out. In the two-layered structure, Diamalloy 4010 is sprayed at the substrate surface while Diamalloy 2002 is sprayed on the top of Diamalloy 4010 coating. The mechanical properties of the coatings are examined through tensile and three-point bending tests. The coating microstructure and morphology are examined using the Scanning Electron Microscope (SEM), Energy Dispersive Spectroscopy (EDS) and X-ray diffraction (XRD). It is found that the coating produced is free from defects including voids and cracks. The failure mechanism of coating during tensile and three-point bending tests is mainly crack formation and propagation in the coating. The elastic modulus of coating produced from Diamalloy 2002 is higher than that of Diamalloy 4010 coating, which is due to the presence of 12% WC in the coating.

36 MATERIALS SCIENCE↗

Oxynitrided Surface Layer Produced On Ti6Al4V Titanium Alloy Under Low Temperature Glow Discharge Conditions For Medical Applications

In spite that titanium oxides increase biocompatibility of titanium implants but their functional life is limited due to the problems arising from brittles and metalosis. Therefore technology, that allow to produce composite surface layer with controlled microstructure, chemical and phase composition and surface morphology on titanium alloy and eliminates the oxides disadvantages has been existing till now is searched. The requirements of titanium and its alloys implants can be fulfill by the low-temperature glow discharge assisted oxynitriding.The paper describes the surface layer of TiO{sub 2}+TiN+Ti{sub 2}N+{alpha}Ti(N) type produced at temperature 680 deg. C that preserves mechanical properties of titanium alloy Ti6Al4V. Characteristics of produced diffusion multi-phase surface layers in range of phase composition, microstructure (SEM, TEM, XRD) and its properties, such as frictional wear resistance are presented. The biological properties in dependency to the applied sterilization method are also analyzed.Properties of produced surface layers are discussed with reference to titanium alloy. The obtained data show that produced surface layers improves titanium alloy properties both frictional wear and biological. Preliminary in vitro examinations show good biocompatibility and antithrombogenic properties.

36 MATERIALS SCIENCE↗

Mechanical Properties of Laser Heat Treated 6 mm Thick UHSS-Steel

In this work abrasion resistant (AR) steel with a sheet thickness of 6 mm was heat treated by a 4 kW Nd:YAG and a 4 kW Yb:Yag-laser, followed by self-quenching. In the delivered condition, test material blank (B27S) is water quenched from 920 deg. C. In this condition, fully martensitic microstructure provides excellent hardness of over 500 HB. The test material is referred to AR500 from now onwards. Laser heat treatment was carried out only on top surface of the AR500 sheet: the achieved maximum temperature in the cross-section varies as a function of the depth. Consequently, the microstructure and mechanical properties differ between the surfaces and the centre of the cross-section (layered microstructure). For better understanding, all layers were tested in tensile tests. For a wide heat treatment track, the laser beam was moved by scanning. Temperatures were measured using thermographic camera and thermocouples. Laser heat treated AR500 samples were tested in hardness tests and by air bending using a press brake machine. Microstructures were studied using a light microscope and FE-SEM/SEM-EBSD. At least three kind of microstructure layers were observed: 1) Dual-Phase ferritic/martensitic (T = A{sub C1}-A{sub C3}), 2) ferritic (T{approx}A{sub C3}) and 3) bainitic/martensitic (T>A{sub C3}).

36 MATERIALS SCIENCE↗

Integrated diagnostics of heterostructures with QW layers

Potential of the integrated diagnostics of III-V complex quantum-well (QW) structures used for fabrication of power lasers is demonstrated for the example of GaInP/GaAs/AlGaAs QW structures grown by the metal-organic chemical vapor deposition method. An analysis of cathodoluminescence spectra enabled estimation of the composition of barrier layers, confirmed the existence of a QW, and detected anomalies in its emission associated with compositional changes. An examination of the structures with a transmission electron microscope determined the thickness of barrier layers and the width and composition of the QW, and discovered transition layers near interfaces. The composition of the barrier layers was precisely determined by electron probe microanalysis. The resulting values of the parameters were used in interpretation of X-ray diffraction data, which confirmed the existence of transition regions and revealed composition gradients and partial relaxation in the main part of barrier layers. The integrated study yielded consistent and substantiated data on the layer thickness and composition and data on the quality of interfaces, partial relaxation of the layers, and existence of transition layers and composition gradients.

36 MATERIALS SCIENCE↗

Facile solvothermal synthesis of graphene-MnOOH nanocomposites

In this paper, we report a facile solvothermal route capable of aligning MnOOH nanocrystals on graphene. X-ray diffraction (XRD) and transmission electron microscopy (TEM) observations indicate that the exfoliated graphene sheets are decorated randomly by MnOOH nanocrystals, forming well-dispersed graphene-MnOOH nanocomposites. Dissolution-crystallization and oriented attachment are speculated to be the vital mechanisms in the synthetic process. The attachment of additives, such as MnOOH nanoparticles, are found to be beneficial for the exfoliation of GO as well as preventing the restack of graphene sheets. Moreover, cyclic voltammetry (CV) analyses suggest that the electrochemical reversibility is improved by anchoring MnOOH on graphene. Notably, the as-fabricated nanocomposites reveal unusual catalytic performance for the thermal decomposition of ammonium perchlorate (AP) due to the concerted effects of graphene and MnOOH. This template-free method is easy to reproduce, and the process proceeds at a low temperature and can be readily extended to prepare other graphene-based nanocomposites. - Graphical abstract: Manganese oxyhydroxide nanocrystals have been successfully attached onto the graphene sheets via an oriented attachment and dissolution-crystallization process, forming a nanocomposite with unusual catalytic capabilities. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The influence of microstructure on magnetic properties of nanocrystalline Fe-Pt-Nb-B permanent magnet ribbons

A FePt-based hard-magnetic nanocomposite of exchange spring type was prepared by isothermal annealing of melt-spun Fe{sub 52}Pt{sub 28}Nb{sub 2}B{sub 18} (atomic percent) ribbons. The relationship between microstructure and magnetic properties was investigated by qualitative and quantitative structural analysis based on the x-ray diffraction, transmission electron microscopy, and {sup 57}Fe Moessbauer spectrometry on one hand and the superconducting quantum interference device magnetometry on the other hand. The microstructure consists of L1{sub 0}-FePt hard-magnetic grains (15-45 nm in diameter) dispersed in a soft magnetic medium composed by A1 FePt, Fe{sub 2}B, and boron-rich (FeB)PtNb remainder phase. The ribbons annealed at 700 deg. C for 1 h exhibit promising hard-magnetic properties at room temperature: M{sub r}/M{sub s}=0.69; H{sub c}=820 kA/m and (BH){sub max}=70 kJ/m{sup 3}. Strong exchange coupling between hard and soft magnetic phases was demonstrated by a smooth demagnetizing curve and positive {delta}M-peak in the Henkel plot. The magnetic properties measured from 5 to 750 K reveals that the hard characteristics remains rather stable up to 550 K, indicating a good prospect for the use of these permanent magnets in a wide temperature range.

36 MATERIALS SCIENCE↗

TiO{sub 2}/PANI And MWNT/PANI Composites Thin Films For Hydrogen Gas Sensing

The MWNT and TiO{sub 2} doped Polyaniline (PANI) composites were synthesized by In-situ chemical oxidative polymerization method at low temperature. The MWNT/PANI and TiO{sub 2}/PANI composite thin films were prepared using spin coating method onto finger type interdigited electrodes to develop the chemiresistor type gas sensor for hydrogen gas sensing application. It was observed that the MWNT and TiO{sub 2} doped PANI composite thin films show a higher response in comparision to neat PANI. The structural and morphological properties of these composite films were characterized by X-Ray differaction (XRD) pattern and sccaning electrone microscopy (SEM) respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Non-stoichiometric Fe{sub x}WN{sub 2}: Leaching of Fe from layer-structured FeWN{sub 2}

Non-stoichiometric Fe{sub x}WN{sub 2} (x{approx}0.72) was synthesized via leaching of Fe from layer-structured stoichiometric FeWN{sub 2} by soaking in sulfuric acid at ca. 50 deg. C. The synthesized products were characterized by powder X-ray diffraction (pXRD), secondary electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and magnetic measurements. Non-stoichiometric Fe{sub x}WN{sub 2} has the same symmetry unit cell as stoichiometric FeWN{sub 2} (P6{sub 3}/mmc), but the lattice parameters change: the a-axis expands by 0.16% while the c-axis decreases by 1.5%. Polycrystalline powder of Fe{sub x}WN{sub 2} showed similar morphologies as those of FeWN{sub 2}. The calculated electronic structure of stoichiometric FeWN{sub 2} shows a more ionic-bonding character between Fe and N than that between W and N, which presumably allows for the partial Fe leaching from between the W-N prismatic layers. The magnetic susceptibility of Fe{sub x}WN{sub 2} smoothly decreases with increasing temperature from 3 to 300 K, unlike the broad maximum seen near 27 K in stoichiometric FeWN{sub 2}. - Graphical abstract: Non-stoichiometric Fe{sub x}WN{sub 2} (x{approx}0.72) was synthesized via leaching of Fe from layer-structured stoichiometric FeWN{sub 2} by soaking in sulfuric acid at ca. 50 deg. C.

36 MATERIALS SCIENCE↗

The electrochemical performance of ordered mesoporous carbon/nickel compounds composite material for supercapacitor

A series of high performance ordered mesoporous carbon/nickel compounds composites have been synthesized by a combination of incipient wetness impregnation and hydrothermal method for the first time. X-ray diffraction (XRD), N{sub 2} adsorption/desorption isotherms and transmission electron microscopy (TEM) are used to characterize the composites derived at the hydrothermal temperature of 125, 150, 175, 200, 250, 275 and 300 {sup o}C. The formation of nanosized nickel compounds, fully inside the mesopore system, was confirmed with XRD and TEM. An N{sub 2} adsorption/desorption isotherms measurements still revealed mesoporosity for the host/guest compounds. It is noteworthy that an OMC/nickel nitrate hydroxide hydrate composite (OMCN-150) exhibits more excellent performance. Based on the various hydrothermal temperatures of the composite, the capacitance of an OMCN-150 delivering the best electrochemical performance is about 2.4 (5 mV s{sup -1}) and 1.5 (50 mV s{sup -1}) times of the pristine OMC. The capacitance retention of an OMCN-150 is 96.1%, which indicates that the electrochemical performance of the supercapacitor is improved greatly, and represents novel research and significant advances in the field of electrode composite materials for supercapacitor. -- Graphical abstract: A series of high performance nickel compound/ordered mesoporous carbon composites were synthesized by a combination of incipient wetness impregnation and hydrothermal method for the first time. Display Omitted

36 MATERIALS SCIENCE↗

Order-to-disorder phase transformation in ion irradiated uranium-bearing delta-phase oxides RE{sub 6}U{sub 1}O{sub 12} (RE=Y, Gd, Ho, Yb, and Lu)

Polycrystalline uranium-bearing compounds Y{sub 6}U{sub 1}O{sub 12}, Gd{sub 6}U{sub 1}O{sub 12}, Ho{sub 6}U{sub 1}O{sub 12}, Yb{sub 6}U{sub 1}O{sub 12}, and Lu{sub 6}U{sub 1}O{sub 12} samples were irradiated with various ions species (300 keV Kr{sup ++}, 400 keV Ne{sup ++}, and 100 keV He{sup +}) at cryogenic temperature ({approx}100 K), and the microstructures were examined following irradiation using grazing incidence X-ray diffraction and transmission electron microscopy. The pristine samples are characterized by an ordered, fluorite derivative structure, known as the delta phase. This structure possesses rhombohedral symmetry. Amorphization was not observed in any of the irradiated samples, even at the highest dose {approx}65 dpa (displacement per atom). On the other hand, some of these compounds experienced an order-to-disorder (O-D) phase transformation, from an ordered rhombohedral to a disordered fluorite structure, at ion doses between 2.5 and 65 dpa, depending on ion irradiation species. Factors influencing the irradiation-induced O-D transformation tendencies of these compounds are discussed in terms of density functional theory calculations of the O-D transformation energies. - Graphical abstract: The different order-to-disorder (O-D) phase transformation tendencies in irradiated uranium-bearing delta-phase RE{sub 6}U{sub 1}O{sub 12} compounds (Y{sub 6}U{sub 1}O{sub 12}, Gd{sub 6}U{sub 1}O{sub 12}, Ho{sub 6}U{sub 1}O{sub 12}, Yb{sub 6}U{sub 1}O{sub 12}, and Lu{sub 6}U{sub 1}O{sub 12}) are revealed by grazing incidence X-ray diffraction and transmission electron microscopy measurements, and theoretical simulations of the O-D transformation energies, performed using DFT, also support our experimental results.

36 MATERIALS SCIENCE↗

Consequence of doping mediated strain and the activation energy on the structural and optical properties of ZnO:Cr nanoparticles

We report on the sol-gel synthesis of Zn{sub 1-x}Cr{sub x}O (x=0.0, 0.05, 0.10, 0.15 and 0.20) nanoparticles. These nanoparticles were characterized by using thermogravimetry/differential scanning calorimetry (TG/DSC), X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman and Photoluminescence (PL). Electronegativity of Cr ions (Cr{sup 3+}) reduces the final decomposition temperature by 40 {sup o}C and activation energy of the reaction when Cr is doped into ZnO. Doping of higher Cr concentration (x{>=}0.10) into ZnO shows formation of secondary spinel (ZnCr{sub 2}O{sub 4}) phase along with the hexagonal (ZnO) and is revealed by XRD. Formation of secondary phase changes the activation energy of the reaction and thus the strain in ZnO lattice. In Raman spectra, additional Raman modes have been observed for Zn{sub 1-x}Cr{sub x}O nanoparticles, which can be assigned to the modes generated due to Cr doping. The Cr doping into ZnO is also supported by PL, in which vacancies are formed with Cr ion incorporation and emission band shifts towards higher wavelength. - Graphical abstract: Cr-doped ZnO nanostructures were synthesized by sol-gel. XRD (a) revealed secondary phase of ZnCr{sub 2}O{sub 4} with increase in Cr concentration. The Cr concentration also changes activation energy of the reaction (b).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Highly tensile-strained, type-II, Ga{sub 1-x}In{sub x}As/GaSb quantum wells

We have investigated the properties of highly tensile-strained (Ga,In)As layers in a GaSb matrix. In situ observations of the growth mode suggest the formation of (Ga,In)As quantum dots. In contrast, ex situ transmission electron microscopy evidences the formation of perfect quantum wells with the presence of a (Ga,In)Sb interfacial layer. This is analyzed taking into account the surfactant behavior of Sb and stabilization of the system by reduction of the overall strain. Photoluminescence is observed up to 3.0 mum at room temperature, in good agreement with calculations assuming a type-II band alignment and including the (Ga,In)Sb interfacial layer.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Twins and their boundaries during homoepitaxy on Ir(111)

The growth and annealing behavior of strongly twinned homoepitaxial films on Ir(111) have been investigated by scanning tunneling microscopy, low-energy electron diffraction, and surface x-ray diffraction. In situ surface x-ray diffraction during and after film growth turned out to be an efficient tool for the determination of twin fractions in multilayer films and to unravel the nature of lateral twin crystallite boundaries. The annealing of the twin structures is shown to take place in a two-step process; first, the length of the lateral twin crystallite boundaries is reduced, without affecting the amount of twinned material, and then, at much higher temperatures, the twins themselves anneal. Within moderately annealed films lateral twin crystallite boundaries are visible at the film surface as fractional steps from which strain fields extend. The nature of these boundaries is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

One-Step Growth of Ge doped ZnO Tubes by Thermal Evaporation

In this paper we report a simple thermal evaporation technique (horizontal tube furnace) to grow the bulk-quantity of germanium (Ge) doped zinc oxide (ZnO) tubes on the Si substrate by using one-step thermal evaporation of a mixed powder of Ge and ZnO. The microstructure and optical properties of the Ge doped ZnO tubes have been investigated by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction, photoluminescence (PL) spectrometer and Raman spectrometer. The investigation of structural properties indicated that the structures consist of bulk quantities of cylindrical rod and tube with diameter around 1micron. EDX reveals that the tube structures have Ge, Zn and O{sub 2} compositions and XRD analysis indicated the product is mainly composed of Ge, zinc germanium oxide (Zn{sub 2}GeO{sub 4}) and small proportion of ZnO. Room temperature photoluminescence (PL) spectrum shows broad emission peaks around 400 nm, opening up a route to potential applications in future optoelectronic devices. Raman measurement also measured at room temperature for these tubes.

36 MATERIALS SCIENCE↗