Search NASA⌕ Search

SEARCH · Search NASA

Results for “compositional data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Flammability of Epoxy Resins Containing Phosphorus

As part of a program to develop fire-resistant exterior composite structures for future subsonic commercial and general aviation aircraft, flame-retardant epoxy resins are under investigation. Epoxies and their curing agents (aromatic diamines) containing phosphorus were synthesized and used to prepare epoxy formulations. Phosphorus was incorporated within the backbone of the epoxy resin and not used as an additive. The resulting cured neat epoxy formulations were characterized by thermogravimetric analysis, propane torch test, elemental analysis, microscale combustion calorimetry, and fire calorimetry. Several formulations showed excellent flame retardation with phosphorous contents as low as 1.5% by weight. The fracture toughness and compressive strength of several cured formulations showed no detrimental effect due to phosphorus content. The chemistry and properties of these new epoxy formulations are discussed.

Flammability studies↗

Spectral analysis of ALH 84001, a meteorite from Mars

ALH 84001 has recently been reclassified as a meteorite from Mars (SNC) and contains more than 90% orthopyroxene with minor chromite and accessory phases of augite, maskelynite, and carbonate. This meteorite represents a new class of igneous material from Mars. We have measured reflectance spectra of ALH 84001 as a chip as a powder, dry sieved to less than 125 microns to compare with previous spectral analyses of SNCs and remote observations of Mars. Spectra of the chip and powder in the visible-to-near-infrared region are shown. These spectra are composites of data measured with the RELAB bidirectional spectrometer from 0.3 to 2.55 microns and a Nicolet FTIR for longer wavelengths. As expected, the spectra of the chip have negative slopes and are significantly darker than the spectrum of the particulate sample, which has a positive slope. The strong absorptions near 1 micron and 2 microns are characteristic of low-Ca pyroxene and have band rninima of 0.925 microns and 1.930 microns. The strong absorption near 3 microns is characteristic of water. There is a distinct flattening in the spectrum between 1.0 and 1.5 microns indicating the presence of an additional absorption. This is interpreted to be the result of Fe(2+) in the M1 site of low-Ca pyroxene. Mid-infrared spectra showing the Christiansen feature and the reststrahlen bands are shown for spectra of the powder and of three different locations on the chip. These spectra exhibit several features in this range, some of which are associated with a specific region on the chip. Each of the spectra includes a doublet reststrahlen peak near 1100/cm, and peaks near 880 and 500/cm, which are typical for low-Ca pyroxenes. Weaker features at 940-1000/cm, 600-750/cm, and 530-560/cm are present in spectra from some locations on the chip, but not others, implying compositional and textural variation.

Bishop, J.↗

Lifetimes of fiber composites under sustained tensile loading

A description is presented of the test techniques which have been used to apply sustained uniaxial tensile loading to fiber/epoxy composites. The fiber types used include S-glass, aramid, graphite, and beryllium wire. The applied load vs lifetime data for four composite materials are presented in graphs. Attention is given to a statistical analysis of data, a performance comparison of various composites, the age effect on the strength of composites, the applicability of the lifetime data to complex composites, and aspects of accelerated test method development. It is found that the lifetime of a composite under a sustained load varies widely. Depending on the composite system, the minimum life typically differs from the maximum life by a factor of 100 to 1000. It is in this connection recommended that a use of average life data should be avoided in serious design calculations.

Chiao, T. T.↗

Neutron irradiation of Am-241 effectively produces curium

Computer study was made on the production of multicurie amounts of highly alpha-active curium 242 from americium 241 irradiation. The information available includes curium 242 yields, curium composition, irradiation data, and production techniques and safeguards.

Anderson, R. W.↗

Molecular-beam gas-sampling system

A molecular beam mass spectrometer system for rocket motor combustion chamber sampling is described. The history of the sampling system is reviewed. The problems associated with rocket motor combustion chamber sampling are reported. Several design equations are presented. The results of the experiments include the effects of cooling water flow rates, the optimum separation gap between the end plate and sampling nozzle, and preliminary data on compositions in a rocket motor combustion chamber.

Young, W. S.↗

Methodological questions of creating tissue-equivalent phantoms

On the basis of analysis and generalization of literature data, the composition of tissue equivalent plastic was justified, parameters of a standard man were determined, plaster and metal forms were created for casting dummies, and an experimental model was produced from tissue equivalent material.

Kolodkin, A. V.↗

Technical assessment for quality control of resins

Survey visits to companies involved in the manufacture and use of graphite-epoxy prepregs were conducted to assess the factors which may contribute to variability in the mechanical properties of graphite-epoxy composites. In particular, the purpose was to assess the contributions of the epoxy resins to variability. Companies represented three segments of the composites industry - aircraft manufacturers, prepreg manufacturers, and epoxy resin manufacturers. Several important sources of performance variability were identified from among the complete spectrum of potential sources which ranged from raw materials to composite test data interpretation.

Gosnell, R. B.↗

Remote in-situ elemental analysis systems for underwater application

The systems approach, theoretical measurement calculations, and preliminary measurements to be used in monitoring and mapping pollutants (such as traces of heavy metals) in the Chesapeake Bay are discussed. A neutron gamma-ray method is under development for demonstrating the system. The excitation source to be used is a machine accelerator using a deuterium/tritium reaction to produce 14-MeV neutrons. The neutrons excite characteristic gamma ray emission from the neutron irradiated surface. The discrete line emission produced can be used to infer both qualitative and quantitative elemental composition. A data preprocessor will accumulate, digitize, store, format, and prepare the data for transmission which can be accomplished by telephone, microwave, and possibly satellite link to central processors.

Trombka, J. I.↗

Computer-generated maps of lunar composition from gamma-ray data

Processing of some of the gamma-ray data obtained by Apollo 15 and 16 has been accomplished by analyzing count rates in three energy bands. The count rate variations in the three energy bands are due in various degrees to thorium, uranium, potassium, iron and titanium. The mapping which results from the gamma-ray count rates has an effective resolution of about two degrees. Regions of high titanium content in certain maria, the low values of iron in a zone of the central equatorial highland and the relatively low value of iron near Archimedes are noted.

Arnold, J. R.↗

Comparative petrology and possible genetic relations among the Apollo 11 basalts

A comparative petrological study has been performed on 19 large Apollo-11 basalt fragments as well as two smaller vitrophyres in order to determine how many igneous bodies are presented by this suite of rocks. Detailed petrographic and mineral chemical studies have been performed on each sample along with an electron microprobe point count, which gives the mode, the range and distribution of all mineral zonation and the bulk composition. These data confirm the twofold division of the Apollo-11 basalts into high-K (type A) and low-K (type B) basalts.

Beaty, D. W.↗

A physical basis for remote rock mapping of igneous rocks using spectral variations in thermal infrared emittance

Results of a theoretical investigation of the relation between spectral features in the 8-12 micrometer region and rock type are presented. Data on compositions of a suite of rocks and measurements of their spectral intensities in 8.2-10.9 and 9.4-12.1 micrometer bands published by Vincent (1973) were subjected to various quantitative procedures. There was no consistent direct relationship between rock group names and the relative spectral intensities. However, there is such a relationship between the Thornton-Tuttle (1960) Differentiation Index and the relative spectral intensities. This relationship is explicable on the basis of the change in average Si-O bond length which is a function of the degree of polymerization of the SiO4 tetrahedra of the silicate minerals in the igneous rocks.

Walter, L. S.↗

Monitoring tropical cyclone intensity using wind fields derived from short-interval satellite images

Rapid scan visible images from the Visible Infrared Spin Scan Radiometer sensor on board SMS-2 and GOES-1 were used to derive high resolution upper and lower tropospheric environmental wind fields around three western Atlantic tropical cyclones (1975-78). These wind fields were used to derive upper and lower tropospheric areal mean relative vorticity and their differences, the net relative angular momentum balance and upper tropospheric mass outflow. These kinematic parameters were shown by studies using composite rawinsonde data to be strongly related to tropical cyclone formation and intensity changes. Also, the role of forced synoptic scale subsidence in tropical cyclone formation was examined. The studies showed that satellite-derived lower and upper tropospheric wind fields can be used to monitor and possibly predict tropical cyclone formation and intensity changes. These kinematic analyses showed that future changes in tropical cyclone intensity are mainly related to the "spin-up" of the storms by the net horizontal transport of relative angular momentum caused by convergence of cyclonic vorticity in the lower troposphere and to a lesser extent the divergence of anticyclone vorticity in the upper troposphere.

Rodgers, E. B.↗

Equatorial response to northeasterly cold surges as inferred from satellite cloud imagery

Daily convective activity in equatorial regions during Dec.-Jan., 1974-1975 was estimated from NOAA satellite data and composited in relation to the phase of cold surge episodes which then occured. Eastward and westward propagating cloud clusters displayed phase speeds of about 5 and 10 m/sec, respectively, and were generated near southwestern Borneo after a cold surge. Kelvin wave responses were indicated by confinement of the eastward-moving components to the equatorial region. Further, an analysis of symmetric and asymmetric characteristics showed that components symmetric with respect to the equator displayed a larger response amplitude, which was taken to mean that strongly trapped waves were generated from heat sources near the equator.

Lau, K.-M.↗

Development of design allowable data for Celion 6000/LARC-160, graphite/polyimide composite laminates

A design allowables test program was conducted on Celion 6000/LARC-160 graphite polyimide composite to establish material performance over a 116 K (-250 F) to 589 K (600 F) temperature range. Tension, compression, in-plane shear and short beam shear properties were determined for uniaxial, quasi-isotropic and + or - 45 deg laminates. Effects of thermal aging and moisture saturation on mechanical properties were also evaluated. Celion 6000/LARC-160 graphite/polyimide can be considered an acceptable material system for structural applications to 589 K (600 F).

Ehret, R. M.↗

A general interactive system for compositing digital radar and satellite data

Reynolds and Smith (1979) have considered the combined use of digital weather radar and satellite data in interactive systems for case study analysis and forecasting. Satellites view the top of clouds, whereas radar is capable of observing the detailed internal structure of clouds. The considered approach requires the use of a common coordinate system. In the present investigation, it was decided to use the satellite coordinate system as the base system in order to maintain the fullest resolution of the satellite data. The investigation is concerned with the development of a general interactive software system called RADPAK for remapping and analyzing conventional and Doppler radar data. RADPAK is implemented as a part of a minicomputer-based image processing system, called Atmospheric and Oceanographic Image Processing System. Attention is given to a general description of the RADPAK system, remapping methodology, and an example of satellite remapping.

Ghosh, K. K.↗

ISEE-1 data reduction and analysis plasma composition experiment

The plasma composition experiment covers energies from OeV to 17 keV/e and has a mass-per-charge range from less than 1 to about 150 amu. Measurements were made from the inner ring current region to the plasma sheet, magnetotail lobes, and the magnetopause boundary layers and beyond. Possibly the most significant results from the experiment are those related to energetic (0+) ions of terrestrial origin. These ions are found in every region of the magnetosphere reached by the spacecraft and can have energy and pitch-angle distributions that are similar to those traditionally associated with protons of solar wind origin. The (0+) ions are commonly the most numerous ions in the 0.1 - 17 keV/e energy range and are often a substantial part of the ion population at large distances as well, especially during geomagnetically disturbed conditions. An overview of results obtained for the (0+) and other ions with energies in the 0.1 - 17 keV/e range in the magnetosphere is given.

Lennartsson, W.↗

Shuttle tethered satellite program

Features and applications of the Shuttle tethered satellite system (TSS) are outlined. The TSS would be mounted on a normal cargo pallet and used to deploy or retrieve payloads weighing up to 500 kg from the Orbiter by reeling in or unreeling a tether line extended along the gravity gradient vertical. Attaching a conducting wire to the tether would permit electrodynamic measurements of space plasma. An initial mission under development is to deploy an instruments package 20 km above the Orbiter with a conducting wire tether, thereby obtaining data on low frequency hydromagnetic waves generated by tether passage through the space plasma. An aerodynamics package could also be lowered to 130 km, where measurements can be made with magnetometers for geoscience data, atmospheric composition, and cosmic dust can be collected. Details of engineering assignments for the TSS divided up between NASA and the Italian National Research Council are discussed.

Nolan, M. B.↗