Search NASA⌕ Search

SEARCH · Search NASA

Results for “d”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

HOST instrumentation R and D program overview

The turbine hot-section technology (HOST) Instrumentation R&D program focuses on two main classes of instrumentation: (1) those that characterizes the environment around the turbine engine components, which include gas flows measurement, gas temperatures, and heat fluxes; (2) to characterize the effect of the environment on the turbine engine components, which include strain measurements and an optical system to structural responses such as cracking, buckling, spalling, carbon buildup. The HOST Instrumentation R&D program concentrates on the critical measurements that can not be made by commercially available instruments or with instruments that are already in development. The measurements of strain and gas flow are emphasized, these measurements are extremely critical to the success of the HOST program and the HOST requirements differ from the current state of the art by a considerable margin.

Wenger, N. C.↗
NASA NTRS1984

The Dynamics of Ionospheric D Region over East Siberia

Some main results of experimental investigations of the dynamical regime of the ionospheric D-region over East Siberia are presented. Regular measurements of horizontal ionospheric drifts by the radio method of closely spaced receivers, using a long wavelength transmitter operating at a frequency of 200 kHz, were carried out near Irkutsk, USSR, since 1975. The seasonal and inter-annual variations of prevailing wind (zonal and meridional), and amplitudes and phases of semi-diurnal tides are investigated. Evidence is presented to show the response of D-region dynamics to stratospheric warmings. Planetary and gravity waves are found in the wind field. Comparison with results of analogous measurements in Central Europe (Collm, GDR) reveals a longitudinal effect on the dynamical regime of the mid-latitude lower thermosphere.

Kazimirovsky, E. S.↗
NASA NTRS1984

The High Latitude D Region During Electron Precipitation Events

The fluxes of energetic electrons entering the high-latitude atmosphere during auroral radio absorption events and their effect on the electron density in the auroral D region are discussed. An attempt was made to calculate the radio absorption during precipitation events from the fluxes of energetic electrons measured at geosynchronous orbit, and then to consider the use of absorption measurements to indicate the magnetospheric particle fluxes, the production rates, and electron densities in the D region.

Hargreaves, J. K.↗
NASA NTRS1984

High Energy Particle Effects in the D Region During and After Geomagnetic Storms

The precipitation of energetic particles from the magnetosphere produces a remarkable modification of the mid-latitude D-region structure during daytime and at dawn and dusk conditions. Beside the heavily fluctuating precipitation during the main storm phase, there exists a more continuous input of high energy electrons into the mesosphere in the belt between phi= 50 deg and the auroral zone up to ten days after the disturbance. The excessive D-region ionization, the after-effect of geomagnetic storms, is caused at least partly by additional nitric oxide production. The winter anomaly effects are especially amplified and prolonged by this effect. The source of this mid-latitude particle precipitation is thought to be situated in magnetospheric slot region processes.

Lauter, E. A.↗
NASA NTRS1984

3-D inelastic analysis methods for hot section components (base program)

A 3-D inelastic analysis methods program consists of a series of computer codes embodying a progression of mathematical models (mechanics of materials, special finite element, boundary element) for streamlined analysis of combustor liners, turbine blades, and turbine vanes. These models address the effects of high temperatures and thermal/mechanical loadings on the local (stress/strain) and global (dynamics, buckling) structural behavior of the three selected components. These models are used to solve 3-D inelastic problems using linear approximations in the sense that stresses/strains and temperatures in generic modeling regions are linear functions of the spatial coordinates, and solution increments for load, temperature and/or time are extrapolated linearly from previous information. Three linear formulation computer codes, referred to as MOMM (Mechanics of Materials Model), MHOST (MARC-Hot Section Technology), and BEST (Boundary Element Stress Technology), were developed and are described.

Wilson, R. B.↗
NASA NTRS1985

Development of a Global 3-D magnetohydrodynamic computational model for solar wind-cometary and planetary studies

The development of a global, 3-D magnetohydrodynamic computational model is described. This model is used to quantitatively describe the detailed continuum field and plasma interaction process of the solar wind with cometary and planetary magneto/ionopause shapes. The present solar wind/terrestrial planet interaction (Level 1) model (which is based on an axisymmetric gas dynamic plus frozen field approximation to the full MHD equations) is extended to a full 3-D gas dynamic (Level 2) approximation. A mass loading capability in the Level 1 interaction model is implemented.

Stahara, S. S.↗
NASA NTRS1984

The Economics of Private Sector R and D Decisionmaking in Aeronautics

Information which can be used in planning to insure commercial research and technology programs which are complementary to internally financed private sector activities are presented. The main concern is to identify the characteristics of productive projects in which firms are unlikely to invest. It is shown that: (1) if it is difficult to assess the commercial relevance of an R&D project or it it is characterized by high technical risk, or a relatively long payback period, private funding will be unlikely; and (2) if a project is large relative to the size of the firm, it is unlikely to be funded in the early stages of the R&D process. Firms tend to underinvest in projects with these characteristics.

Source record↗
NASA NTRS1985

Space vehicle glow measurements on STS 41-D

A flight experiment using a hand-held, image-intensified spectrographic camera was performed on mission 41-D. The instrument enabled the photographic documentation of the position of the spectral slit on the image to be subjected to spectrographic analysis. Because of this instrument feature, the spectrum of the glow on the Shuttle tail pod could be clearly separated from spectrum of the scattered light from the Orbiter. From the measurements it is clear that the spectrum of the glow is a continuum in the passband of the instrument between 4200 A and 8000 A. The measured spectral resolution of the instrument was 35 A. The scattered light from the Orbiter surfaces distinctly show the components of the earth's airglow at 5577 A and 7620 A. On the same flight material samples were also carried by the Orbiter attached to the Remote Manipulating System arm. These samples were representative of the material overcoatings used on the space telescope. The altitude of the 41-D flight was 290 km, instead of the 220 km which was originally planned for this experiment. The signal to noise ratio in the material glow discrimination experiment was quite low. This made it difficult to draw strong conclusions regarding the glow propensity of the materials. Nevertheless it was clear that polyethylene produces a very weak glow, while most black overcoating materials produce significant glow. MgF2 was also found to produce a relatively intense glow.

Mende, S. B.↗
NASA NTRS1987

Experience with 3-D composite grids

Experience with the three-dimensional (3-D), chimera grid embedding scheme is described. Applications of the inviscid version to a multiple-body configuration, a wind/body/tail configuration, and an estimate of wind tunnel wall interference are described. Applications to viscous flows include a 3-D cavity and another multi-body configuration. A variety of grid generators is used, and several embedding strategies are described.

Benek, J. A.↗
NASA NTRS1987

Plume formation in the D-double prime-layer and the roughness of the core-mantle boundary

A series of very-high-resolution finite element calculations of plume formation in the D-double prime-layer has been performed for several plausible rheologies and boundary conditions in order to study both the early and later stages of boundary layer development. The results show that plumes are initiated by coalescence of small-scale convective instabilities within the low-viscosity region immediately above the core-mantle boundary (CMB). These instabilities support topographic roughness on the CMB having horizontal scales of 20-50 km and provide a source for scattered P-waves seen as precursors to the phases PKIKP and PKKP. The calculated structure of fully developed plumes emerging from the D-double prime-layer consists of 5-50 cm/yr flow confined to 50-100 km thick vertical conduits. With strongly temperature-dependent viscosity, plumes exhibit time-dependent behavior, including upward propagating solitary conduit waves, which may contribute to episodicity in hotspot volcanism.

Olson, Peter↗
NASA NTRS1988

On 3-D inelastic analysis methods for hot section components. Volume 1: Special finite element models

This annual status report presents the results of work performed during the fourth year of the 3-D Inelastic Analysis Methods for Hot Section Components program (NASA Contract NAS3-23697). The objective of the program is to produce a series of new computer codes permitting more accurate and efficient 3-D analysis of selected hot section components, i.e., combustor liners, turbine blades and turbine vanes. The computer codes embody a progression of math models and are streamlined to take advantage of geometrical features, loading conditions, and forms of material response that distinguish each group of selected components. Volume 1 of this report discusses the special finite element models developed during the fourth year of the contract.

Nakazawa, S.↗
NASA NTRS1988

FASTWO - A 2-D interactive algebraic grid generator

This paper presents a very simple and effective computational procedure, FASTWO, for generating patched composite finite difference grids in 2-D for any geometry. Major components of the interactive graphics based method that is closely akin to and borrows many tools from transfinite interpolation are highlighted. Several grids produced by FASTWO are shown to illustrate its powerful capability. Comments about extending the methodology to 3-D are also given.

Luh, Raymond Ching-Chung↗
NASA NTRS1988

Vitamin D metabolites and bioactive parathyroid hormone levels during Spacelab 2

The effect of an 8-day space flight (Spacelab mission 2) on plasma levels of the vitamin D and parathyroid hormones is investigated experimentally in four crew members. The results are presented in tables and graphs and briefly characterized. Parathyroid hormone levels remained normal throughout the flight, whereas vitamin D hormone levels increased significantly on day 1 but returned to normal by day 7.

Morey-Holton, Emily R.↗
NASA NTRS1989

The MHOST finite element program: 3-D inelastic analysis methods for hot section components. Volume 2: User's manual

The user options available for running the MHOST finite element analysis package is described. MHOST is a solid and structural analysis program based on the mixed finite element technology, and is specifically designed for 3-D inelastic analysis. A family of 2- and 3-D continuum elements along with beam and shell structural elements can be utilized, many options are available in the constitutive equation library, the solution algorithms and the analysis capabilities. The outline of solution algorithms is discussed along with the data input and output, analysis options including the user subroutines and the definition of the finite elements implemented in the program package.

Nakazawa, Shohei↗
NASA NTRS1987

Numerical solutions of the compressible 3-D boundary-layer equations for aerospace configurations with emphasis on LFC

The application of stability theory in Laminar Flow Control (LFC) research requires that density and velocity profiles be specified throughout the viscous flow field of interest. These profile values must be as numerically accurate as possible and free of any numerically induced oscillations. Guidelines for the present research project are presented: develop an efficient and accurate procedure for solving the 3-D boundary layer equation for aerospace configurations; develop an interface program to couple selected 3-D inviscid programs that span the subsonic to hypersonic Mach number range; and document and release software to the LFC community. The interface program was found to be a dependable approach for developing a user friendly procedure for generating the boundary-layer grid and transforming an inviscid solution from a relatively coarse grid to a sufficiently fine boundary-layer grid. The boundary-layer program was shown to be fourth-order accurate in the direction normal to the wall boundary and second-order accurate in planes parallel to the boundary. The fourth-order accuracy allows accurate calculations with as few as one-fifth the number of grid points required for conventional second-order schemes.

Harris, Julius E.↗
NASA NTRS1989

Multigrid calculations of 3-D turbulent viscous flows

Convergence properties of a multigrid algorithm, developed to calculate compressible viscous flows, are analyzed by a vector sequence eigenvalue estimate. The full 3-D Reynolds-averaged Navier-Stokes equations are integrated by an implicit multigrid scheme while a k-epsilon turbulence model is solved, uncoupled from the flow equations. Estimates of the eigenvalue structure for both single and multigrid calculations are compared in an attempt to analyze the process as well as the results of the multigrid technique. The flow through an annular turbine is used to illustrate the scheme's ability to calculate complex 3-D flows.

Yokota, Jeffrey W.↗
NASA NTRS1989

Synesthetic art through 3-D projection: The requirements of a computer-based supermedium

A computer-based form of multimedia art is proposed that uses the computer to fuse aspects of painting, sculpture, dance, music, film, and other media into a one-to-one synthesia of image and sound for spatially synchronous 3-D projection. Called synesthetic art, this conversion of many varied media into an aesthetically unitary experience determines the character and requirements of the system and its software. During the start-up phase, computer stereographic systems are unsuitable for software development. Eventually, a new type of illusory-projective supermedium will be required to achieve the needed combination of large-format projection and convincing real life presence, and to handle the vast amount of 3-D visual and acoustic information required. The influence of the concept on the author's research and creative work is illustrated through two examples.

Mallary, Robert↗
NASA NTRS1989

Planning 3-D collision-free paths using spheres

A scheme for the representation of objects, the Successive Spherical Approximation (SSA), facilitates the rapid planning of collision-free paths in a 3-D, dynamic environment. The hierarchical nature of the SSA allows collision-free paths to be determined efficiently while still providing for the exact representation of dynamic objects. The concept of a freespace cell is introduced to allow human 3-D conceptual knowledge to be used in facilitating satisfying choices for paths. Collisions can be detected at a rate better than 1 second per environment object per path. This speed enables the path planning process to apply a hierarchy of rules to create a heuristically satisfying collision-free path.

Bonner, Susan↗