Search NASA⌕ Search

SEARCH · Search NASA

Results for “deformation function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Microstructural Evolution of Tantalum During Deformation and Subsequent Annealing

Microstructure-aware models are necessary to predict the behavior of material based on process knowledge or to extrapolate mechanical properties of materials to environmental conditions which are not easily reproduced in the laboratory, e.g., nuclear reactor environments. Elemental Ta provides a relatively simple BCC system in which to develop a microstructural understanding of deformation processes which can then be applied to more complicated BCC alloys. In situ neutron diffraction during compressive deformation and subsequent heat treatment have been used to monitor the evolution of microstructural features in Ta throughout simulated processing steps. Crystallographic texture and dislocation density are determined as a function of first plastic strain, then temperature. Lattice strains are determined and attributed to stresses at macroscopic, grain and dislocation length scales. The increase of the dislocation density through deformation and subsequent recovery during heat treatment is monitored through the changing diffraction line profile. Also, randomization of the texture is used as a signature of recrystallization. The recovery of dislocations through annihilation is not observed to depend on the initial dislocation density in the range studied here. In contrast, recrystallization is observed to depend strongly on the initially dislocation density.

36 MATERIALS SCIENCE↗
NASA NTRS1971

Deformed Brueckner-Hartree-Fock calculation for light nuclei

For the first time the Brueckner-Hartree-Fock (BHF) method was applied to nuclei whose intrinsic structure is nonspherical. One aim was to investigate whether the energy dependent reaction matrix calculated from a realistic nucleon-nucleon interaction leads to deformations similar to, or different from, those obtained from energy independent interactions in Hartree-Fock (HF) calculations. Reaction matrix elements were calculated as a function of starting energy for the Hamada-Johnston interaction, using a Pauli operator appropriate to O-16 and a shifted oscillator spectrum for virtual excited states. Binding energies, single-particle energies, radii, and shape deformations of the intrinsic state in unrenormalized as well as renormalized BHF are discussed and compared with previous HF studies. Results are presented for C-12, O-16, and Ne-20.

Braley, R. C.↗
DOE OSTI2024

Multipole responses in fissioning nuclei and their uncertainties

Electromagnetic multipole responses are key inputs to model the structure, decay, and reactions of atomic nuclei. With the introduction of the finite amplitude method (FAM), large-scale calculations of the nuclear linear response in heavy deformed nuclei have become possible. This work provides a detailed study of multipole responses in actinide nuclei with Skyrme energy density functionals. We quantify both systematic and statistical uncertainties induced by the functional parametrization in FAM calculations. We also extend the FAM formalism to perform blocking calculations with the equal filling approximation for odd-mass and odd-odd nuclei, and analyze the impact of blocking configurations on the response. In conclusion, by examining the entire plutonium isotopic chain from the proton to the neutron drip line, we find a large variability of the response with the neutron number and study how it correlates with the deformation of the nuclear ground state.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1981

Global function approach in structural analysis: Basic approach, numerical results

The structural response to a given environment is described by the differential equations of motion of deformable bodies. Analytic solutions of such problems for a reasonably large class of structural configurations are not within the realm of the possible. Consequently, the mathematical problem is recast into a numerical problem for solution on the computer. New technology in the space and energy fields led to a growing demand for accurate analysis which at times cannot be met due to the limits set by available budgets for computer time. In response to this need for more efficient numerical analysis, the possibilities of reducing the number of freedoms in the system through a revival of the global function approach were explored.

Almroth, B. O.↗
NASA NTRS2016

Using Tabulated Experimental Data to Drive an Orthotropic Elasto-Plastic Three-Dimensional Model for Impact Analysis

An orthotropic elasto-plastic-damage three-dimensional model with tabulated input has been developed to analyze the impact response of composite materials. The theory has been implemented as MAT 213 into a tailored version of LS-DYNA being developed under a joint effort of the FAA and NASA and has the following features: (a) the theory addresses any composite architecture that can be experimentally characterized as an orthotropic material and includes rate and temperature sensitivities, (b) the formulation is applicable for solid as well as shell element implementations and utilizes input data in a tabulated form directly from processed experimental data, (c) deformation and damage mechanics are both accounted for within the material model, (d) failure criteria are established that are functions of strain and damage parameters, and mesh size dependence is included, and (e) the theory can be efficiently implemented into a commercial code for both sequential and parallel executions. The salient features of the theory as implemented in LS-DYNA are illustrated using a widely used composite - the T800S/3900-2B[P2352W-19] BMS8-276 Rev-H-Unitape fiber/resin unidirectional composite. First, the experimental tests to characterize the deformation, damage and failure parameters in the material behavior are discussed. Second, the MAT213 input model and implementation details are presented with particular attention given to procedures that have been incorporated to ensure that the yield surfaces in the rate and temperature dependent plasticity model are convex. Finally, the paper concludes with a validation test designed to test the stability, accuracy and efficiency of the implemented model.

Polymer Matrix Composites↗
DOE OSTI2020

Deep reinforcement learning for complex evaluation of one-loop diagrams in quantum field theory

In this paper we present a technique based on deep reinforcement learning that allows for numerical analytic continuation of integrals that are often encountered in one-loop diagrams in quantum field theory. To extract certain quantities of two-point functions, such as spectral densities, mass poles or multiparticle thresholds, it is necessary to perform an analytic continuation of the correlator in question. At one-loop level in Euclidean space, this results in the necessity to deform the integration contour of the loop integral in the complex plane of the square of the loop momentum, to avoid nonanalyticities in the integration plane. Using a toy model for which an exact solution is known, we train a reinforcement learning agent to perform the required contour deformations. We report our study shows great promise for an agent to be deployed in iterative numerical approaches used to compute nonperturbative two-point functions, such as the quark propagator Dyson-Schwinger equation, or more generally, Fredholm equations of the second kind, in the complex domain.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1996

Shape deformation of the organ of Corti associated with length changes of outer hair cell

Cochlear outer hair cells (OHC) are commonly assumed to function as mechanical effectors as well as sensory receptors in the organ of Corti (OC) of the inner ear. OHC in vitro and in organ explants exhibit mechanical responses to electrical, chemical or mechanical stimulation which may represent an aspect of their effector process that is expected in vivo. A detailed description, however, of an OHC effector operation in situ is still missing. Specifically, little is known as to how OHC movements influence the geometry of the OC in situ. Previous work has demonstrated that the motility of isolated OHCs in response to electrical stimulation and to K(+)-gluconate is probably under voltage control and causes depolarisation (shortening) and hyperpolarization (elongation). This work was undertaken to investigate if the movements that were observed in isolated OHC, and which are induced by ionic stimulation, could change the geometry of the OC. A synchronized depolarization of OHC was induced in guinea pig cochleae by exposing the entire OC to artificial endolymph (K+). Subsequent morphometry of mid-modiolar sections from these cochleae revealed that the distance between the basilar membrane (BM) and the reticular lamina (RL) had decreased considerably. Furthermore, in the three upper turns OHC had significantly shortened in all rows. The results suggest that OHC can change their length in the organ of Corti (OC) thus deforming the geometry of the OC. The experiments reveal a tonic force generation within the OC that may change the position of RL and/or BM, contribute to damping, modulate the BM-RL-distance and control the operating points of RL and sensory hair bundles. Thus, the results suggest active self-adjustments of cochlear mechanics by slow OHC length changes. Such mechanical adjustments have recently been postulated to correspond to timing elements of animal communication, speech or music.

Non-NASA Center↗
DOE OSTI2025

Repurposing Post-Consumer Polyethylene to Access Cross-Linked Polyethylene with Reprocessabilty, Recyclability, and Tunable Properties

Polyethylene (PE) is the most widely produced plastic but accumulation and resistance to degradation has significantly contributed to the plastic waste crisis. Upcycling has presented promising solutions to transform PE waste into value-added products. In this study, mixed post-consumer PE was successfully repurposed into reprocessable and chemically recyclable cross-linked polyethylene (XLPE). This process involved converting PE into telechelic oligomers, followed by repolymerization using a hybrid cross-linking system consisting of a dynamic cross-linker 2,4,6-triethoxy-1,3,5-triazine (TETA) and non-dynamic cross-linker tris(6-isocyanatohexyl)isocyanurate (Tri-HDI). In the resulting XLPE, TETA facilitated iterative reprocessing with minimal property degradation across cycles, whereas Tri-HDI helped preserve functional performance throughout service life. Compared to PE, XLPE exhibited enhanced mechanical properties, reduced creep deformation under application-relevant temperatures, and high temperature structural stability. Notably, copolymerizing PE oligomers with commercial macrodiols was employed to create composite XLPEs, enabling tuning material properties. After use, XLPE can be efficiently and selectively depolymerized under mild conditions, even when mixed with commercial insulator cables. This depolymerization allows for the recovery of the constituent building blocks, enabling purification and subsequent repolymerization for reuse. This approach demonstrates the potential of repurposing plastic waste into sustainable materials and fostering the development of a circular economy.

INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CHEMI↗
DOE OSTI2022

The influence of temperature on the strain-hardening behavior of Fe-22/25/28Mn-3Al-3Si TRIP/TWIP steels

In this work, the influence of temperature and stacking fault energy (SFE) on the strain-hardening behavior and critical resolved shear stress for twinning was investigated for three Fe–22/25/28Mn–3Al–3Si wt.% transformation- and twinning-induced plasticity (TRIP/TWIP) steels. The SFEs were calculated by two different methods, density functional theory and statistical thermodynamic modeling. The dislocation structure, observed at low levels of plastic deformation, transitions from “planar” to “wavy” dislocation glide with an increase in temperature, Mn content, and/or SFE. The change in dislocation glide mechanisms from planar to wavy reduces the strain hardening rate, in part due to fewer planar obstacles and greater cross slip activity. Additionally, the alloys exhibit a large decrease in strength and ductility with increasing temperature from 25 to 200 °C, attributed to a substantial reduction in the thermally activated component of the flow stress, predominate suppression of TRIP and TWIP, and a significant increase in the critical resolved shear stress for mechanical twinning. Interestingly, the increase in SFE with temperature had a rather minor influence on the critical resolved shear stress for mechanical twinning, and other temperature dependent factors which likely play a more dominant role are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Cuboidal Liquid Crystal Phases Under Multiaxial Geometrical Frustration.

Cuboidal liquid crystal phases - the so-called blue phases - consist of a network of topological defects arranged into a cubic symmetry. They exhibit striking optical properties, including Bragg reflection in the visible range and fast response times. Confining surfaces can interfere with the packing of such a network, leading to structures that have not been explored before. In this work, a Landau-de Gennes free energy formalism for the tensor alignment field Q is used to investigate the behavior of chiral liquid crystals under non-isotropic confinement. The underlying free energy functional is solved by relying on a Monte Carlo method that facilitates efficient exploration of configuration space. The results of simulations are expressed in terms of phase diagrams as a function of chirality and temperature for three families of spheroids: oblate, spherical, and prolate. Upon deformation, blue phases adapt and transform to accommodate the geometrical constraints, thereby resulting in a wider range of thermal stability. For oblate spheroids, confinement interferes with the development of a full blue phase structure, resulting on a combination of half skyrmions. For prolate spheroids, the blue phases are hybridized and exhibit features of blue phases I and II. More generally, it is shown that mechanical deformation provides an effective means to control, manipulate and stabilize blue phases and cholesterics confined in tactoids.

Palacio-Betancur, Viviana↗
DOE OSTI2019

Understanding and predicting damage and failure at grain boundaries in BCC Ta

Understanding the effect of grain boundaries (GBs) on the deformation and spall behavior is critical to designing materials with tailored failure responses under dynamic loading. This understanding is hampered by the lack of in situ imaging capability with the optimum spatial and temporal resolution during dynamic experiments, as well as by the scarcity of a systematic data set that correlates boundary structure to failure, especially in BCC metals. To fill in this gap in the current understanding, molecular dynamics simulations are performed on a set of 74 bi-crystals in Ta with a [110] symmetric tilt axis. Our results show a correlation between GB misorientation angle and spall strength and also highlight the importance of GB structure itself in determining the spall strength. Specifically, we find a direct correlation between the ability of the GB to plasticity deform through slip/twinning and its spall strength. Additionally, a change in the deformation mechanism from dislocation-meditated to twinning-dominated plasticity is observed as a function of misorientation angles, which results in lowered spall strengths for high-angle GBs.

Chen, J. (ORCID:000000018633229X)↗
DOE OSTI2025

Challenges in Continuous In-Field Critical Current Testing of High-Temperature Superconducting Tapes: Thermal and Mechanical Perspectives

High-temperature superconductors (HTS) are essential for ultra-high-field applications requiring exceptional current-carrying capacity under extreme conditions. However, systematic characterization of critical current in long-length conductors remains challenging due to complex thermal, electromag netic, and mechanical interactions during continuous testing. This study reports the development of a continuous in-field magnetization testing system for position-dependent critical current measurement in HTS tapes at 20 K under 7.5 T fields applied normal to the tape plane, enabling identification of performance-limiting regions that could compromise magnet stability. Here, the system addresses two fundamental challenges inherent to cryogenic reel to-reel testing. First, thermal management requires continuous cooling of a moving conductor to 20 K, achieved through liquid nitrogen precooling combined with a 100 W@20 K Gifford McMahon cryocooler. Second, screening currents in high fields generate Lorentz forces that induce twisting, bowing, and potential delamination. To mitigate these risks, we propose mechanical reinforcement and active current density suppression strategies. Numerical simulations using the stream function formulation reveal four primary failure modes: frictional heating at guide interfaces, unstable equilibria causing deformation, transverse current-induced stresses at guide transitions, and unsupported forces in vertical spans. Our mitigation strategies include PTFE coated guides to minimize friction, spring-loaded stabilization mechanisms to maintain tape alignment, controlled pre-heating using the liquid nitrogen thermal jacket to suppress critical current at stress points, and optimized guide positioning to minimize force accumulation. The experimental system is nearing completion, with testing planned to commence within two months. Preliminary validation at 65 K under 0.5 T demonstrates strong correlation between simulation-predicted mechanical instabilities and observed critical current variations during conductor tran sitions through the measurement region. These findings establish a robust foundation for quality assurance protocols essential to next-generation superconducting magnet applications.

Chen, Siwei [Princeton Plasma Physics Laboratory (↗
NASA NTRS1982

Subsonic aerodynamic and flutter characteristics of several wings calculated by the SOUSSA P1.1 panel method

The SOUSSA (steady, oscillatory, and unsteady subsonic and supersonic aerodynamics) program is the computational implementation of a general potential flow analysis (by the Green's function method) that can generate pressure distributions on complete aircraft having arbitrary shapes, motions and deformations. Some applications of the initial release version of this program to several wings in steady and oscillatory motion, including flutter are presented. The results are validated by comparisons with other calculations and experiments. Experiences in using the program as well as some recent improvements are described.

Yates, E. C., Jr.↗
NASA NTRS1984

A simple rectangular element for 2-dimensional analysis of laminated composites

A simple rectangular finite element was developed for two dimensional analysis of laminated composite materials. The rectangular laminated composite element eliminates the need to add elements to a model simply to account for the material properties of various laminae. This is particularly advantageous for thick laminates with many lamina. Explicit integration in terms of generalized displacements minimizes the algebraic effort required to derive the element stiffness and the thermal load vector. A substitute shape function technique is used to improve the performance of the element in modeling bending type deformation. Results for several example problems are discussed.

Whitcomb, J. D.↗
NASA NTRS1986

Equilibrium of magnetic fields with arbitrary interweaving of the lines of force. I - Discontinuities in the torsion

Consideration is given to the static force-free equilibrium of a magnetic field in which all of the lines of force connect without knotting between parallel planes. The field is formed by continuous deformation from an initial uniform field, and is conventiently described in terms of the scalar function psi, which is the stream function for the incompressible wrapping and interweaving of the lines of force. Local compression and expansion of the lines of force is described in terms of the scalar function Phi. Equilibrium in the field requires satisfaction of two independent equations which cannot be accomplished without the full freedom of both psi and Phi. It is shown that discontinuities in the torsional characteristics of the lines occur when psi is predetermined by an arbitrary pattern. Discontinuities in the winding pattern of the lines can lead to discontinuities in the associated current sheets.

Parker, E. N.↗
NASA NTRS1986

A simple rectangular element for two-dimensional analysis of laminated composites

A simple rectangular finite element was developed for two-dimensional analysis of laminated composite materials. The rectangular laminated composite element eliminates the need to add elements to a model simply to account for the material properties of various laminae. This is particularly advantageous for thick laminates with many lamina. Explicit integration in terms of generalized displacements minimizes the algebraic effort required to derive the element stiffness and the thermal load vector. A substitute shape function technique is used to improve the performance of the element in modeling bending type deformation. Results for several example problems are discussed.

Whitcomb, J. D.↗
NASA NTRS1986

On the numerical performance of three-dimensional thick shell elements using a hybrid/mixed formulation

Three-dimensional thick shell elements with 8, 16, and 18 nodes are formulated by using the hybrid/mixed method. In bending applications, these elements are free from locking effect and give improved stress predictions. Finite element equations are derived from the Hellinger-Reissner variational principle in which both the displacement and stress fields are approximated by independent interpolation functions. For the assumption of stress parameters, three guidelines are followed: (1) suppression of kinematic deformation modes, (2) invariant element property, and (3) the constraint index exhibited by the element, when applied to constrained-media problems, must be greater than or equal to one. Numerical results are presented to show the element's behavior characteristics regarding sensitivity to locking, distortion effect (patch tests), mesh convergence and the accuracy of stress evaluation.

Graf, W.↗