SEARCH · Search NASA

Results for “deformation function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

NASA NTRS1971

The NASTRAN computer program for structural analysis.

Discussion of a large NASA-sponsored digital computer program for static and dynamic analysis of structures with linear or nonlinear material properties. The program fits to perform buckling analysis, vibration mode analysis of conservative or damped systems, frequency response analysis, and transient response analysis on the IBM 360, UNIVAC 1108, and CDC 6600 computers. It also provides automatic generation of several types of loads such as gravity loads and thermal strain loads, plots of deformed and nondeformed structures, and the choice of alternate analysis methods such as direct or modal formulations of dynamic problems. The program is intended primarily for large problems involving hundreds of thousands of degrees of freedom. A flexible Executive System is provided to facilitate the addition of new functional capabilities to the program.

Macneal, R. H.↗

NASA NTRS1989

Random vibrations of laminated plates modeled within the first order shear deformation theory

This paper deals with the dynamic response of anisotropic laminated composite plates to stationary random excitation. The theory of laminated plates used here includes shear deformation and rotary inertia effects in the same manner as Mindlin's theory for isotropic homogeneous plates. Two cases of random pressure fields are considered in this analysis. In the first case, it is modeled as a uniformly distributed load, random in time with an exponential decaying correlation function, while in the second one as a jet noise, fully correlated in one direction and homogeneous in the perpendicular one. The analysis presented herein, as well as the obtained response characteristics, expressed in terms of mean-squares and angle-dependent mean-squares, may be useful in the design of composite plates subjected to random pressure fields and in the evaluation of their reliability.

Cederbaum, G.↗

NASA NTRS2005

Aeroelastic Deformation: Adaptation of Wind Tunnel Measurement Concepts to Full-Scale Vehicle Flight Testing

The adaptation of a proven wind tunnel test technique, known as Videogrammetry, to flight testing of full-scale vehicles is presented. A description is presented of the technique used at NASA's Dryden Flight Research Center for the measurement of the change in wing twist and deflection of an F/A-18 research aircraft as a function of both time and aerodynamic load. Requirements for in-flight measurements are compared and contrasted with those for wind tunnel testing. The methodology for the flight-testing technique and differences compared to wind tunnel testing are given. Measurement and operational comparisons to an older in-flight system known as the Flight Deflection Measurement System (FDMS) are presented.

Burner, Alpheus W.↗

NASA NTRS2005

Aeroelastic Deformation: Adaptation of Wind Tunnel Measurement Concepts to Full-Scale Vehicle Flight Testing

Burner, Alpheus W.↗

NASA NTRS1975

Development of procedures for calculating stiffness and damping properties of elastomers. Part 3: The effects of temperature, dissipation level and geometry

Effects of temperature, dissipation level and geometry on the dynamic behavior of elastomer elements were investigated. Force displacement relationships in elastomer elements and the effects of frequency, geometry and temperature upon these relationships are reviewed. Based on this review, methods of reducing stiffness and damping data for shear and compression test elements to material properties (storage and loss moduli) and empirical geometric factors are developed and tested using previously generated experimental data. A prediction method which accounts for large amplitudes of deformation is developed on the assumption that their effect is to increase temperature through the elastomers, thereby modifying the local material properties. Various simple methods of predicting the radial stiffness of ring cartridge elements are developed and compared. Material properties were determined from the shear specimen tests as a function of frequency and temperature. Using these material properties, numerical predictions of stiffness and damping for cartridge and compression specimens were made and compared with corresponding measurements at different temperatures, with encouraging results.

Smalley, A. J.↗

NASA NTRS1990

Deformation and fracture of thin sheet aluminum-lithium alloys: The effect of cryogenic temperatures

The objective is to characterize the fracture behavior and to define the fracture mechanisms for new Al-Li-Cu alloys, with emphasis on the role of indium additions and cryogenic temperatures. Three alloys were investigated in rolled product form: 2090 baseline and 2090 + indium produced by Reynolds Metals, and commercial AA 2090-T81 produced by Alcoa. The experimental 2090 + In alloy exhibited increases in hardness and ultimate strength, but no change in tensile yield strength, compared to the baseline 2090 composition in the unstretched T6 condition. The reason for this behavior is not understood. Based on hardness and preliminary Kahn Tear fracture experiments, a nominally peak-aged condition was employed for detailed fracture studies. Crack initiation and growth fracture toughness were examined as a function of stress state and microstructure using J(delta a) methods applied to precracked compact tension specimens in the LT orientation. To date, J(delta a) experiments have been limited to 23 C. Alcoa 2090-T81 exhibited the highest toughness regardless of stress state. Fracture was accompanied by extensive delamination associated with high angle grain boundaries normal to the fatigue precrack surface and progressed microscopically by a transgranular shear mechanism. In contrast the two peak-aged Reynolds alloys had lower toughness and fracture was intersubgranular without substantial delamination. The influences of cryogenic temperature, microstructure, boundary precipitate structure, and deformation mode in governing the competing fracture mechanisms will be determined in future experiments. Results contribute to the development of predictive micromechanical models for fracture modes in Al-Li alloys, and to fracture resistant materials.

Wagner, John A.↗

NASA NTRS1975

An Experimental Study of the Nonlinear Stiffness of a Rotor Blade Undergoing Flap, Lag and Twist Deformations

The large deformation of a cantilevered beam under a gravity tip load was studied. The beam root is rotated so that the tip load is oriented at various angles with respect to the beam principal axes. Static twist and bending deflections of the tip and bending natural frequencies were measured as a function of tip load magnitude and orientation. The experimental data are compared with the results of a recently developed nonlinear structural theory and agreement is good for deflections that are small compared to the beam span with systematic deviations for larger deflections. These results support the validity and utility of the nonlinear structural theory for rotor blade applications.

Dowell, E. H.↗

NASA NTRS1976

Influence of transverse shear on an axial crack in a cylindrical shell

An axial crack in a cylindrical shell is investigated by use of a 10th order shell theory, which accounts for transverse shear deformations as well as a special kind of orthotropy. The symmetric problem is formulated in terms of two coupled singular integral equations, which are solved numerically. The asymptotic membrane and bending stress fields ahead of the crack are found to be self similar. Stress intensity factors are given as a function of the shell parameter for various values of the ratio crack length to shell thickness. considerable differences from 8th order shell theory results are found for the bending stresses, while the membrane stresses of the 8th order theory seem to be a lower limit reached for very thin shells.

Krenk, S.↗

NASA NTRS1977

Influence of transverse shear on an axial crack in a cylindrical shell

An axial crack in a cylindrical shell is investigated by use of a 10th order shell theory, which accounts for transverse shear deformations as well as a special kind of orthotropy. The symmetric problem is formulated in terms of two coupled singular integral equations, which are solved numerically. The asymptotic membrane and bending stress fields ahead of the crack are found to be self similar. Stress intensity factors are given as a function of the shell parameter for various values of the ratio crack length to shell thickness. Considerable differences from 8th order shell theory results are found for the bending stresses, while the membrane stresses of the 8th order theory seems to be a lower limit reached for very thin shells.

Krenk, S.↗

NASA NTRS1978

Influence of transverse shear on an axial crack in a cylindrical shell

An axial crack in a cylindrical shell is investigated by use of a 10th order shell theory, which accounts for transverse shear deformations as well as a special kind of orthotropy. The symmetric problem is formulated in terms of two coupled singular integral equations, which are solved numerically. The asymptotic membrane and bending stress fields ahead of the crack are found to be self similar. Stress intensity factors are given as a function of the shell parameter for various values of the ratio shell radius to shell thickness. Considerable differences from 8th order shell theory results are found for the bending stresses, while the membrane stresses of the 8th order theory seems to be a lower limit reached for very thin shells.

Krenk, S.↗

NASA NTRS1990

ISOLEV - A level surface cutting plane program for fluid flow data

A computer program, ISOLEV, allows interactive visualization of CFD scalar and vector functions by means of user-specified sections of the data. The application is based on table lookups which govern both isosurface generation on hexahedral grid cells and recursive subdivision of the cells. The program supports Gouraud-shaded color maps of the data, surface-on-surface maps, and deformation surfaces of vector fields. The execution of the code for animated sweeps is improved by resorting to the cells in the database and maintaining an active set of cells to be rendered.

Kerlick, G. David↗

NASA NTRS1934

Impact buckling of thin bars in the elastic range for any end condition

Following a qualitative discussion of the complicated process involved in a short-period, longitudinal force applied to an originally not quite straight bar, the actual process is substituted by an idealized process for the purpose of analytical treatment. The simplifications are: the assumption of an infinitely high rate of propagation of the elastic longitudinal waves in the bar, limitation to slender bars, disregard of material damping and of rotatory inertia, the assumption of consistently small elastic deformations, the assumption of cross-sectional dimensions constant along the bar axis, the assumption of a shock-load constant in time, and the assumption of eccentricities on one plane. Then follow the mathematical principles for resolving the differential equation of the simplified problem, particularly the developability of arbitrary functions with steady first and second and intermittently steady third and fourth derivatives into one convergent series, according to the natural functions of the homogeneous differential equation.

Taub, Josef↗

NASA NTRS1992

Hierarchical tapered bar elements undergoing axial deformation

A method is described to model the dynamics of tapered axial bars of various cross sections based on the well-known Craig/Bampton component mode synthesis technique. This element is formed in terms of the static constraint modes and interface restrained normal modes. This is in contrast with the finite elements as implemented in NASTRAN where the interface restrained normal modes are neglected. These normal modes are in terms of Bessel functions. Restoration of a few of these modes leads to higher accuracy with fewer generalized coordinates. The proposed models are hierarchical so that all lower order element matrices are embedded in higher order element matrices. The advantages of this formulation compared to standard NASTRAN truss element formulation are demonstrated through simple numerical examples.

Ganesan, N.↗

NASA NTRS1977

Experimental transient and permanent deformation studies of steel-sphere-impacted or explosively-impulsed aluminum panels

The sheet explosive loading technique (SELT) was employed to obtain elastic-plastic, large deflection 3-d transient and/or permanent strain data on simple well defined structural specimens and materials: initially-flat 6061-T651 aluminum panels with all four sides ideally clamped via integral construction. The SELT loading technique was chosen since it is both convenient and provides "forcing function information" of small uncertainty. These data will be useful for evaluating pertinent 3-d structural response prediction methods.

Witmer, E. A.↗

NASA NTRS1977

An experimental-theoretical correlation study of non-linear bending and torsion deformations of a cantilever beam

An experimental study of the large deformation of a cantilevered beam under a gravity tip load has been made. The beam root is rotated so that the tip load is oriented at various angles with respect to the beam principal axes. Static twist and bending deflections of the tip and bending natural frequencies have been measured as a function of tip load magnitude and orientation. The experimental data are compared with the results of a recently developed non-linear structural theory. Agreement is reasonably good when bending deflections are small compared to the beam span, but systematic differences occur for larger deflections.

Dowell, E. H.↗

NASA NTRS1983

Toughening mechanism in elastometer-modified epoxy resins: Part 1

Several plaques of Epon 828, cured with piperidine, modified with hycar(r) CTBN 1300X8, Hycar(R) CTBN 1300X13, and Hycar(R) CTBN 1300x15, and in some cases modified with biphenol A (BPA), yielded properly toughened epoxies with rubber particle diameters ranging from 0.1 to 10 microns. Fracture toughness experiments indicate that toughness was more a function of rubber content than the rubber particle size. Tensile volumetric behavior of the near resin exhibits two regions: an initial region where the increase in volume strain was due to the Poisson's effect, and a second region where a slower rate of increase in volume strain was due to shear deformation. Tensile volumetric deformation of an elastomer-modified epoxy exhibits the same type of behavior to that of the neat resin at low rates ( 3.2x0.01 sec(-1)). But at very high strain rates, which correspond more closely to the strain rates at the crack tip, there exists an increase in volume strain beyond the Poisson's effect. TEM, SEM and OM studies indicate that the rubber particles had voided. When a thin section from the deformed region is viewed under crossed-polarized light, shear bands are seen connecting voided rubber particles. From this information cavitation and enhanced shear band formation is proposed as the toughening mechanism.

Yee, A. F.↗

NASA NTRS1991

Predictor-corrector procedures for thermal buckling analysis of multilayered composite plates

A study is made of two predictor-corrector procedures for the accurate determination of global, as well as detailed, thermal buckling response characteristics of composite plates. Both procedures use first-order shear deformation theory in the predictor phase, but differ in the elements of the computational model being adjusted in the corrector phase. The first procedure calculates a posteriori estimates of the composite correction factors and uses them to adjust the transverse shear stiffnesses of the plate. The second procedure calculates a posteriori the functional dependence of the displacement components on the thickness coordinate. The corrected quantities are then used in conjunction with three-dimensional equations to obtain better estimates for the different response quantities. Extensive numerical results are presented, showing the effects of variation in the geometric and lamination parameters for antisymmetrically laminated composite plates subjected to uniform temperature rise, on the accuracy of the thermal buckling response obtained by predictor-corrector procedures.

Noor, A. K.↗

NASA NTRS1992

An independent refinement and integration procedure in multiregion finite element analysis

An independent refinement and integration procedure is developed to couple together independently modeled (global and local) regions in a single analysis. The models can have different levels of refinement and along the interface between them the finite element nodes need not coincide with one another. In the local model all the nodes except the nodes at the interface are statically condensed and the reduced stiffness matrix is obtained. For this static condensation a modified frontal solution technique is employed. A spline interpolation function that satisfies the linear isotropic plate bending differential equation is used to relate the local model interface nodal displacements to the global model interface displacements. The proposed independent refinement and integration procedure is evaluated by applying it to two- and three-dimensional cases involving inplane and out-of-plane deformation. The procedure yielded very accurate results for all the examples studied.

Krishnamurthy, T.↗