Search NASA⌕ Search

SEARCH · Search NASA

Results for “dependence analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

Synthesis, crystal structure and properties of SmBaCo{sub 2−x}Fe{sub x}O{sub 5+δ}

The solid solution formation range in the SmBaCo{sub 2−x}Fe{sub x}O{sub 5+δ} (0≤x≤2) system examined at 1100 °C in air corresponds to 0≤x≤1.1. The crystal structure of SmBaCo{sub 2−x}Fe{sub x}O{sub 5+δ} with x≤0.5 was described as orthorhombic (space group Pmmm), and with 0.6≤x≤1.1—as tetragonal (P4/mmm). The introduction of iron into the cobalt sublattice leads to a gradual increase of the unit cell parameters and volume, accompanied with increasing oxygen content determined by thermogravimetry. The dilatometric curves collected at 25–1100 °C in air exhibit moderate nonlinearities associated with the orthorhombic→tetragonal phase transition, as confirmed by the high-temperature X-ray diffraction analysis. Temperature dependencies of the electrical conductivity measured by 4-probe dc method in the temperature range 25–1000 °C in air display maxima at 300–350 °C, whilst the conductivity decreases with iron additions. These trends were discussed in terms of the defect structure and nature of the main charge carriers in SmBaCo{sub 2−x}Fe{sub x}O{sub 5+δ}. It was also shown that SmBaCo{sub 2−x}Fe{sub x}O{sub 5+δ} is chemically stable with respect to the Ce{sub 0.8}Sm{sub 0.2}O{sub 1.9} solid electrolyte up to 1100 °S, but reacts with Zr{sub 0.85}Y{sub 0.15}O{sub 1.93} even at 900 °S. Highlights: • The solid solution formation range in the SmBaCo{sub 2−x}Fe{sub x}O{sub 5+δ} system at 1100 °C in air corresponds to 0≤x≤1.1. • The unit cell volume and oxygen content in the solid solutions increase with x. • Oxygen nonstoichiometry of SmBaCo{sub 2−x}Fe{sub x}O{sub 5+δ} solid solutions. • Temperature dependencies of the electrical conductivity exhibit maxima at the temperatures when oxygen exchange with the gaseous phase becomes significant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of the Modal Characteristics of Structures Operating in Dense Liquid Oxygen Turbopumps

A number of valuable conclusions can be drawn from this study. First, knockdown factors for a specific fluid are not constant but instead are dependent on the mode shape, although the largest this variability gets is about 10% for LOX, the densest fluid. The factors decrease the most for lower frequency shapes and less for higher ones. It follows, therefore, that mode number mismatch between air and fluid operation becomes not only possible, but common, as a knockdown factor for a particular mode shape may be higher than for another mode shape. Since this is a function of added mass, the mismatch is more prevalent for higher density fluids, but it initiates even for very low density ones. Another important conclusion reached is that it appears that the basic mode shapes of a structure do not change if it is fully symmetric, which includes its geometry and boundary conditions. There is some indication of small changes in the relative magnitudes within the mode shape. This conclusion is evident in the results from the cantilever rectangular plate and the inducer, which are not symmetric, and the fixed-fixed plate and the annular disk, which are. For non-symmetric structures, though, the mode shapes almost universally change for dense fluids, as shown by the very low MAC calculations. For the inducer in particular, the changes follow a trend of reduced parabolic and sine wavelengths with increasing density. It is critical to recognize the change in mode shape for several reasons. First, model updating with modal test becomes problematic if the shapes change. Second, design to avoid resonance is highly critical on the mode shape for modes other than the primary ones, as resonance is only a factor when the excitation shape matches the mode shape. Finally, application of the modal superposition method of forced response analysis is dependent on the use of accurate mode shapes. A more-refined assessment of the "knockdown" factor values and ranges than any previously reported in the literature for a realistic engineering structure is also presented in this paper. This data is of tremendous benefit for preliminary analysis and design, where a quick estimate is necessary. These results are important not just for rocket engine turbomachinery, but for water pumps and turbines, propellers, and any other structure operating in a heavy fluid with dynamic excitation. The clear avenue for future work for this endeavor is to expand the analytical techniques discussed in the literature to develop analytical expressions and justification for the mode shape changes and associated frequency knockdowns. These expressions must be able to accurately predict the functional relationship to the shapes, which will enable accurate tracing of the mode number from vacuum analysis (or testing in air) to analysis and operation in the intended fluid environment.

Chiu, Joseph↗

Finite Element Simulation of Solid Rocket Booster Separation Motors During Motor Firing

One of the toughest challenges facing Solid Rocket Booster (SRB) engineers is to ensure that any design changes made to the Shuttle-Derived Booster Separation Motors (BSM) for future space exploration vehicles is able to withstand the increasingly hostile motor firing environment without cracking its critical component - the graphite throat. This paper presents a critical analysis methodology and techniques for assessing effects of BSM design changes with great accuracy and precision. For current Space Shuttle operation, the motor firing occurs at SRB separation - approximately 125 seconds after Shuttle launch at an altitude of about 28 miles. The motor operation event lasts about two seconds, however, the surface temperature of the graphite throat increases approximately 3400 F in less than one second with a corresponding increase in surface pressure of approximately 2200 pounds per square inch (psi) in less than one-tenth of a second. To capture this process fully and accurately, a two-phase sequentially coupled thermal-mechanical finite element approach was developed. This method allows the time- and location-dependent pressure fields to interact with the spatial-temporal thermal fields throughout the operation. The material properties of graphite throat are orthotropic and temperature-dependent. The analysis involves preload and multiple body contacts.

Yu. Weiping↗

Numerical Studies of a Fluidic Diverter for Flow Control

The internal flow structure in a specific fluidic diverter is studied over a range from low subsonic to sonic inlet conditions by a time-dependent numerical analysis. The understanding will aid in the development of fluidic diverters with minimum pressure losses and advanced designs of flow control actuators. The velocity, temperature and pressure fields are calculated for subsonic conditions and the self-induced oscillatory behavior of the flow is successfully predicted. The results of our numerical studies have excellent agreement with our experimental measurements of oscillation frequencies. The acoustic speed in the gaseous medium is determined to be a key factor for up to sonic conditions in governing the mechanism of initiating the oscillations as well as determining its frequency. The feasibility of employing plasma actuation with a minimal perturbation level is demonstrated in steady-state calculations to also produce oscillation frequencies of our own choosing instead of being dependent on the fixed-geometry fluidic device.

Gokoglu, Suleyman A.↗

Design and Analysis of Multifidelity Finite Element Simulations

Abstract The numerical accuracy of finite element analysis (FEA) depends on the number of finite elements used in the discretization of the space, which can be varied using the mesh size. The larger the number of elements, the more accurate the results are. However, the computational cost increases with the number of elements. In current practice, the experimenter chooses a mesh size that is expected to produce a reasonably accurate result, and for which the computer simulation can be completed in a reasonable amount of time. Improvements to this approach have been proposed using multifidelity modeling by choosing two or three mesh sizes. However, mesh size is a continuous parameter, and therefore, multifidelity simulations can be performed easily by choosing a different value for the mesh size for each of the simulations. In this article, we develop a method to optimally find the mesh sizes for each simulation and satisfy the same time constraints as a single or a double mesh size experiment. A range of different mesh sizes used in the proposed method allows one to fit multifidelity models more reliably and predict the outcome when meshes approach infinitesimally small, which is impossible to achieve in actual simulations. We illustrate our approach using an analytical function and a cantilever beam finite element analysis experiment.

Engineering↗

Temperature-dependent cyclic response and microstructure of AlSi10Mg(Cu) alloy

Highlights: • The cyclic behavior of AlSi10Mg(Cu) alloy in LCF regime is temperature-dependent. • The transition temperature of the cyclic behavior is about 180 °C. • Microstructure transitions were observed with increasing temperature. - Abstract: In the present work, the cyclic stress response and microstructure evolution of AlSi10Mg(Cu) alloy at high temperature were investigated. Samples were tested at high temperature, under total strain control and tensile-compression loading (R = −1) until failure. The cyclic stress response was analyzed, as well as the microstructures were examined by TEM. The results demonstrated that the cycle stress response of the studied alloy is experimental temperature dependence. Microstructure analysis indicated the precipitated phase was disruptive changed by high temperature compared to the as-received alloy. A lot of coherent β″-Mg{sub 2}Si precipitates and GP zones were observed in the as-received alloy, resulting in sustaining cyclic hardening by pinning effect. At high temperature, the vast majority of the tiny coherency precipitates and clusters transformed to the large semi-coherency Q′ and β′-Mg{sub 2}Si precipitates, leading to the sharp decrease of pinning number and the change of dislocation interaction mechanism, which is believed to be one of the reasons for softening. Another reason is that high temperatures can promote dislocations movement.

36 MATERIALS SCIENCE↗

Methodological Aspects of Shielding and Activation Analyses for ITER Diagnostics Systems - Paper 125

It is expected that the diagnostics systems of the ITER tokamak will provide valuable measurement data about the first in its kind D-T fusion plasma with emission of 14 MeV neutrons. These systems must withstand the neutron and secondary photon radiation along the ITER operation. Under the neutron irradiation the ITER materials are getting radioactive and therefore an adequate shielding must be provided along all the time of ITER operation and shut-down for the reliable machine operation and for the safe personnel access to its components, such as the diagnostics ports. These are the prerequisites for the shielding and activation analysis of the ITER diagnostics systems discussed in this paper. This paper provides insight into the current tasks of neutronics support for the development of ITER diagnostics systems. The tasks themselves range from relatively straightforward ones such as Monte Carlo radiation transport calculations for shielding analyses of the diagnostics systems, to more advanced tasks of Shut-Down Dose Rate (SDDR) analyses for which the dedicated Rigorous 2-Step mesh-based (R2Smesh) and Direct 1-Step (D1S) methodologies were applied. The accuracy and precision of the ITER neutronics analysis is dependent on the methodological approaches and the implying modeling assumptions. In addition to the SDDR challenges, another distinguishing feature of fusion neutronics is a wide use of CAD-based neutronics modeling to design components of fusion devices such as ITER and DEMO. Basically, there are two possibilities of CAD geometry settings in Monte Carlo (MC) radiation transport models, either by the geometry format conversion of CAD models into the format of MC models by means of the interface programs such as McCad and MCAM or by the direct use of CAD geometry engine in MC calculations such as it was realized in the DAGMC code approach. Several conversion interfaces and the DAGMC software library have been tested on the 3D ITER model developed for the CAD-MCNP benchmark. It was concluded that the considered approaches have reached the maturity level to allow their application to real ITER design analyses.

61 RADIATION PROTECTION AND DOSIMETRY↗

Stopping Power of Different Ions in Si Measured with a Bulk Sample Method and Bayesian Inference Data Analysis

The accuracy of ion beam analysis experiments depends critically on the stopping power values available. While for H and He ions accuracies normally better than 5% are achieved by usual interpolative schemes such as SRIM, for heavier ions the accuracy is worse. One of the main reasons is that the experimental data bases are very sparse, even for important materials such as Si. New measurements are therefore needed. Measurement of stopping power is often made with transmission in thin films, with the usual problems of film thickness homogeneity. We have previously developed an alternative method based on measuring bulk spectra, and fitting the yield by treating the stopping power as a fit parameter in a Bayesian inference Markov chain Monte Carlo procedure included in the standard IBA code NDF. We report on improvements of the method and on its application to the determination of the stopping power of {sup 7}Li in Si. To validate the method, we also apply it to the stopping of {sup 4}He in Si, which is known with 2% accuracy.

36 MATERIALS SCIENCE↗

Effect of Grain Boundaries on the Performance of Thin-Film-Based Polycrystalline Silicon Solar Cells: A Numerical Modeling

Solar cells/photovoltaic, a renewable energy source, is appraised to be the most effective alternative to the conventional electrical energy generator. A cost-effective alternative of crystalline wafer-based solar cell is thin-film polycrystalline-based solar cell. This paper reports the numerical analysis of dependency of the solar cell parameters (i.e., efficiency, fill factor, open-circuit voltage and short-circuit current density) on grain size for thin-film-based polycrystalline silicon (Si) solar cells. A minority carrier lifetime model is proposed to do a correlation between the grains, grain boundaries and lifetime for thin-film-based polycrystalline Si solar cells in MATLAB environment. As observed, the increment in the grain size diameter results in increase in minority carrier lifetime in polycrystalline Si thin film. A non-equivalent series resistance double-diode model is used to find the dark as well as light (AM1.5) current–voltage (I-V) characteristics for thin-film-based polycrystalline Si solar cells. To optimize the effectiveness of the proposed model, a successive approximation method is used and the corresponding fitting parameters are obtained. The model is validated with the experimentally obtained results reported elsewhere. The experimentally reported solar cell parameters can be found using the proposed model described here.

36 MATERIALS SCIENCE↗

Hydrogen-doped In{sub 2}O{sub 3} transparent conducting oxide films prepared by solid-phase crystallization method

We have characterized amorphous to crystalline transformation of hydrogen (H)-doped In{sub 2}O{sub 3} (In{sub 2}O{sub 3}:H) films by transmission electron microscopy, thermal desorption spectroscopy, spectroscopic ellipsometry, and Hall measurements. The In{sub 2}O{sub 3}:H films that show a mixed-phase structure embedded with small density of crystalline grains in a large volume fraction of amorphous phase have been fabricated at room temperature by the sputtering of an In{sub 2}O{sub 3} ceramic target with introduction of H{sub 2}O vapor, and the films have been postannealed in vacuum to crystallize the amorphous phase. With increasing annealing temperature up to 200 deg. C, the film shows a large increase in Hall mobility ({mu}{sub Hall}) from 42 to 110 cm{sup 2}/V s and a decrease in carrier density (N{sub Hall}) from 4.6x10{sup 20} to 2.1x10{sup 20} cm{sup -3} with slight decrease in resistivity. The change in {mu}{sub Hall} and N{sub Hall} with annealing temperature is strongly correlated with the volume fractions of the amorphous and crystalline phases in the films. Analyses of dielectric functions of the films using the Drude model revealed that the high electron mobility in the crystallized films is attributed mainly to longer relaxation time rather than smaller effective mass, as compared with as-deposited films. Temperature-dependent Hall analysis, relationship between N{sub Hall} and {mu}{sub Hall}, and comparison between {mu}{sub Hall} and optical mobility showed that (i) scattering processes inside amorphous and/or crystalline matrices limit the mobility, (ii) doubly charged ionized impurity scattering is reduced by crystallization, and (iii) phonon scattering becomes dominant after crystallization in the In{sub 2}O{sub 3}:H films. The above results suggest that H-doping reduces carrier scattering in the crystallized In{sub 2}O{sub 3}:H and structural rearrangements during crystallization eliminate oxygen deficiency and generate H{sup +} that acts as a singly charged donor. In this article, we discuss the transport properties with the variation in microscopic and chemical structures in the In{sub 2}O{sub 3}:H films.

36 MATERIALS SCIENCE↗

Crystal structure, characterization and thermoelectric properties of the type-I clathrate Ba{sub 8-y}Sr{sub y}Al{sub 14}Si{sub 32} (0.6{<=}y{<=}1.3) prepared by aluminum flux

The title compound was prepared as single crystals using an aluminum flux technique. Single crystal and powder X-ray diffraction indicate that this composition crystallizes in the clathrate type-I structure, space group Pm3-bar n. Electron microprobe characterization indicates the composition to be Ba{sub 8-y}Sr{sub y}Al{sub 14.2(2)}Si{sub 31.8(2)} (0.77<y<1.3). Single-crystal X-ray diffraction data (90 and 12 K) were refined with the Al content fixed at the microprobe value (12 K data: R{sub 1}=0.0233, wR{sub 2}=0.0441) on a crystal of compositions Ba. The Sr atom preferentially occupies the 2a position; mixed Al/Si occupancy was found on all framework sites. These refinements are consistent with a fully occupied framework and nearly fully occupied cation guest sites as found by microprobe analysis. Temperature dependent electrical resistivity and thermal conductivity have been measured from room temperature to 1200 K on a hot-pressed pellet. Electrical resistivity reveals metallic behavior. The negative Seebeck coefficient indicates transport processes dominated by electrons as carriers. Thermal conductivity is between 22 and 25 mW/cm K. The sample shows n-type conductivity with a maximum figure of merit, zT of 0.3 at 1200 K. A single parabolic band model predicts a five-fold increase in zT at 800 K if carrier concentration is lowered. -- Graphical abstract: The inorganic type-I clathrate phase with nominal composition Ba{sub 7}Sr{sub 1}Al{sub 14}Si{sub 32} has been prepared by Al flux. Single crystal diffraction at 90 and 12 K reveal that the framework is fully occupied with the cation sites nearly fully occupied. The lattice thermal conductivity is low thereby suggesting further optimization of the carrier concentration will lead to a high zT. Display Omitted Highlights: {yields} Ba{sub 7}Sr{sub 1}Al{sub 14}Si{sub 32} is a light element phase ideal for thermoelectric power generation. {yields} Ba{sub 7}Sr{sub 1}Al{sub 14}Si{sub 32} is a high melting point cubic structure ideal for efficient power generation. {yields} The framework is fully occupied with the cation sites nearly fully occupied. {yields} Further optimization of the carrier concentration is expected to lead to a high zT.

36 MATERIALS SCIENCE↗

PLASMA HEATING DURING A CORONAL MASS EJECTION OBSERVED BY THE SOLAR AND HELIOSPHERIC OBSERVATORY

We perform a time-dependent ionization analysis to constrain plasma heating requirements during a fast partial halo coronal mass ejection (CME) observed on 2000 June 28 by the Ultraviolet Coronagraph Spectrometer (UVCS) aboard the Solar and Heliospheric Observatory (SOHO). We use two methods to derive densities from the UVCS measurements, including a density sensitive O V line ratio at 1213.85 and 1218.35 A, and radiative pumping of the O VI {lambda}{lambda}1032, 1038 doublet by chromospheric emission lines. The most strongly constrained feature shows cumulative plasma heating comparable to or greater than the kinetic energy, while features observed earlier during the event show plasma heating of order or less than the kinetic energy. SOHO Michelson Doppler Imager observations are used to estimate the active region magnetic energy. We consider candidate plasma heating mechanisms and provide constraints when possible. Because this CME was associated with a relatively weak flare, the contribution from flare energy (e.g., through thermal conduction or energetic particles) is probably small; however, the flare may have been partially behind the limb. Wave heating by photospheric motions requires heating rates to be significantly larger than those previously inferred for coronal holes, but the eruption itself could drive waves that heat the plasma. Heating by small-scale reconnection in the flux rope or by the CME current sheet is not significantly constrained. UVCS line widths suggest that turbulence must be replenished continually and dissipated on timescales shorter than the propagation time in order to be an intermediate step in CME heating.

79 ASTRONOMY AND ASTROPHYSICS↗

Measurement of D{sup 0}-D{sup 0} Mixing Parameters Using D{sup 0}{yields}K{sub S}{sup 0}{pi}{sup +}{pi}{sup -} and D{sup 0}{yields}K{sub S}{sup 0}K{sup +}K{sup -} Decays

We report a direct measurement of D{sup 0}-D{sup 0} mixing parameters through a time-dependent amplitude analysis of the Dalitz plots of D{sup 0}{yields}K{sub S}{sup 0}{pi}{sup +}{pi}{sup -} and, for the first time, D{sup 0}{yields}K{sub S}{sup 0}K{sup +}K{sup -} decays. The low-momentum pion {pi}{sub s}{sup +} in the decay D{sup *+{yields}}D{sup 0{pi}}{sub s}{sup +} identifies the flavor of the neutral D meson at its production. Using 468.5 fb{sup -1} of e{sup +}e{sup -} colliding-beam data recorded near {radical}(s)=10.6 GeV by the BABAR detector at the PEP-II asymmetric-energy collider at SLAC, we measure the mixing parameters x=[1.6{+-}2.3(stat){+-}1.2(syst){+-}0.8(model)]x10{sup -3}, and y=[5.7{+-}2.0(stat){+-}1.3(syst){+-}0.7(model)]x10{sup -3}. These results provide the best measurement to date of x and y. The knowledge of the value of x, in particular, is crucial for understanding the origin of mixing.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Procedure for implementation of temperature-dependent mechanical property capability in the Engineering Analysis Language (EAL) system

A procedure is presented to allow the use of temperature dependent mechanical properties in the Engineering Analysis Language (EAL) System for solid structural elements. This is accomplished by including a modular runstream in the main EAL runstream. The procedure is applicable for models with multiple materials and with anisotropic properties, and can easily be incorporated into an existing EAL runstream. The procedure (which is applicable for EAL elastic solid elements) is described in detail, followed by a description of the validation of the routine. A listing of the EAL runstream used to validate the procedure is included in the Appendix.

Glass, David E.↗

Interpenetration as a Mechanism for Negative Thermal Expansion in the Metal-Organic Framework Cu 3 (btb) 2 (MOF-14)

Metal–organic framework materials (MOFs) have recently been shown in some cases to exhibit strong negative thermal expansion (NTE) behavior, while framework interpenetration has been found to reduce NTE in many materials. Using powder and single-crystal diffraction methods we investigate the thermal expansion behavior of interpenetrated Cu 3 (btb) 2 (MOF-14) and find that it exhibits an anomalously large NTE effect. Temperature-dependent structural analysis shows that, contrary to other interpenetrated materials, in MOF-14 the large positive thermal expansion of weak interactions that hold the interpenetrating networks together results in a low-energy contractive distortion of the overall framework structure, demonstrating a new mechanism for NTE.

Wu, Yue↗

First measurement of the CP -violating phase $ {\phi}_s^{d\overline{d}} $ in B s o → (K + π – )(K – π + ) decays

A flavour-tagged decay-time-dependent amplitude analysis of B s o → (K + π – )(K – π + ) decays is presented in the K ± π ∓ mass range from 750 to 1600MeV/c 2 . The analysis uses pp collision data collected with the LHCb detector at centre-of-mass energies of 7 and 8 TeV, corresponding to an integrated luminosity of 3.0 fb –1 . Several quasi-two-body decay modes are considered, corresponding to K ± π ∓ combinations with spin 0, 1 and 2, which are dominated by the K o * (800)0 and K o * (1430) o , the K*(892) o and the K 2 * (1430) o resonances, respectively. The longitudinal polarisation fraction for the B 0 s → K*(892)°K¯*(892) 0 decay is measured as f L = 0.208 ± 0.032 ± 0.046, where the first uncertainty is statistical and the second is systematic. The first measurement of the mixing-induced CP -violating phase, $ {\phi}_s^{d\overline{d}} $, in b → dd¯s transitions is performed, yielding a value of $ {\phi}_s^{d\overline{d}} $ = –0.10 ± 0.13 (stat) ± 0.14 (syst) rad.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the CKM angle $γ$ using $B^0 → DK^{*0}$ with $D → K_S^0π^+π^-$ decays

A model-dependent amplitude analysis of the decay $B^0 → D(K_S^0π^+π^-)K^{*0}$ is performed using proton-proton collision data corresponding to an integrated luminosity of 3.0 fb -1 , recorded at $\sqrt{s} = 7$ and 8 TeV by the LHCb experiment. The $CP$ violation observables $x±$ and $y±$, sensitive to the CKM angle $γ$, are measured to be x &#x2212;<!-- - --> = &#x2212;<!-- - --> 0.15 &#x00B1;<!-- ± --> 0.14 &#x00B1;<!-- ± --> 0.03 &#x00B1;<!-- ± --> 0.01 , y &#x2212;<!-- - --> = 0.25 &#x00B1;<!-- ± --> 0.15 &#x00B1;<!-- ± --> 0.06 &#x00B1;<!-- ± --> 0.01 , x + = 0.05 &#x00B1;<!-- ± --> 0.24 &#x00B1;<!-- ± --> 0.04 &#x00B1;<!-- ± --> 0.01 , y + = &#x2212;<!-- - --> 0.65 &#x2212;<!-- - --> 0.23 + 0.24 &#x00B1;<!-- ± --> 0.08 &#x00B1;<!-- ± --> 0.01 , where the first uncertainties are statistical, the second systematic and the third arise from the uncertainty on the $D → K_S^0π^+π^-$ amplitude model. These are the most precise measurements of these observables. They correspond to $γ$ = $(80^{+21}_{-22})$° and $r_{B^0}$ = 0.39 ± 0.13, where $r_{B^0}$ is the magnitude of the ratio of the suppressed and favoured $B^0 → DK^+π^-$ decay amplitudes, in a Kπ mass region of ±50 MeV around the $K*(892)^0$ mass and for an absolute value of the cosine of the $K{*0}$ decay angle larger than 0.4.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗