Search NASA⌕ Search

SEARCH · Search NASA

Results for “design coupling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Analysis and Inverse Design of the HSR Arrow Wing Configuration with Fuselage, Wing, and Flow Through Nacelles

The design process for developing the natural flow wing design on the HSR arrow wing configuration utilized several design tools and analysis methods. Initial fuselage/wing designs were generated with inviscid analysis and optimization methods in conjunction with the natural flow wing design philosophy. A number of designs were generated, satisfying different system constraints. Of the three natural flow wing designs developed, the NFWAc2 configuration is the design which satisfies the constraints utilized by McDonnell Douglas Aerospace (MDA) in developing a series of optimized configurations; a wind tunnel model of the MDA designed OPT5 configuration was constructed and tested. The present paper is concerned with the viscous analysis and inverse design of the arrow wing configurations, including the effects of the installed diverters/nacelles. Analyses were conducted with OVERFLOW, a Navier-Stokes flow solver for overset grids. Inverse designs were conducted with OVERDISC, which couples OVERFLOW with the CDISC inverse design method. An initial system of overset grids was generated for the OPT5 configuration with installed diverters/nacelles. An automated regridding process was then developed to use the OPT5 component grids to create grids for the natural flow wing designs. The inverse design process was initiated using the NFWAc2 configuration as a starting point, eventually culminating in the NFWAc4 design-for which a wind tunnel model was constructed. Due to the time constraints on the design effort, initial analyses and designs were conducted with a fairly coarse grid; subsequent analyses have been conducted on a refined system of grids. Comparisons of the computational results to experiment are provided at the end of this paper.

Krist, Steven E.↗
NASA NTRS2000

A Solution Adaptive Technique Using Tetrahedral Unstructured Grids

An adaptive unstructured grid refinement technique has been developed and successfully applied to several three dimensional inviscid flow test cases. The method is based on a combination of surface mesh subdivision and local remeshing of the volume grid Simple functions of flow quantities are employed to detect dominant features of the flowfield The method is designed for modular coupling with various error/feature analyzers and flow solvers. Several steady-state, inviscid flow test cases are presented to demonstrate the applicability of the method for solving practical three-dimensional problems. In all cases, accurate solutions featuring complex, nonlinear flow phenomena such as shock waves and vortices have been generated automatically and efficiently.

Pirzadeh, Shahyar Z.↗
NASA NTRS1999

An Adaptive Unstructured Grid Method by Grid Subdivision, Local Remeshing, and Grid Movement

An unstructured grid adaptation technique has been developed and successfully applied to several three dimensional inviscid flow test cases. The approach is based on a combination of grid subdivision, local remeshing, and grid movement. For solution adaptive grids, the surface triangulation is locally refined by grid subdivision, and the tetrahedral grid in the field is partially remeshed at locations of dominant flow features. A grid redistribution strategy is employed for geometric adaptation of volume grids to moving or deforming surfaces. The method is automatic and fast and is designed for modular coupling with different solvers. Several steady state test cases with different inviscid flow features were tested for grid/solution adaptation. In all cases, the dominant flow features, such as shocks and vortices, were accurately and efficiently predicted with the present approach. A new and robust method of moving tetrahedral "viscous" grids is also presented and demonstrated on a three-dimensional example.

Pirzadeh, Shahyar Z.↗
NASA NTRS2007

Oil-Free Rotor Support Technologies for an Optimized Helicopter Propulsion System

An optimized rotorcraft propulsion system incorporating a foil air bearing supported Oil-Free engine coupled to a high power density gearbox using high viscosity gear oil is explored. Foil air bearings have adequate load capacity and temperature capability for the highspeed gas generator shaft of a rotorcraft engine. Managing the axial loads of the power turbine shaft (low speed spool) will likely require thrust load support from the gearbox through a suitable coupling or other design. Employing specially formulated, high viscosity gear oil for the transmission can yield significant improvements (approx. 2X) in allowable gear loading. Though a completely new propulsion system design is needed to implement such a system, improved performance is possible.

DellaCorte, Christopher↗
NASA NTRS2008

Logic Gates Made of N-Channel JFETs and Epitaxial Resistors

Prototype logic gates made of n-channel junction field-effect transistors (JFETs) and epitaxial resistors have been demonstrated, with a view toward eventual implementation of digital logic devices and systems in silicon carbide (SiC) integrated circuits (ICs). This development is intended to exploit the inherent ability of SiC electronic devices to function at temperatures from 300 to somewhat above 500 C and withstand large doses of ionizing radiation. SiC-based digital logic devices and systems could enable operation of sensors and robots in nuclear reactors, in jet engines, near hydrothermal vents, and in other environments that are so hot or radioactive as to cause conventional silicon electronic devices to fail. At present, current needs for digital processing at high temperatures exceed SiC integrated circuit production capabilities, which do not allow for highly integrated circuits. Only single to small number component production of depletion mode n-channel JFETs and epitaxial resistors on a single substrate is possible. As a consequence, the fine matching of components is impossible, resulting in rather large direct-current parameter distributions within a group of transistors typically spanning multiples of 5 to 10. Add to this the lack of p-channel devices to complement the n-channel FETs, the lack of precise dropping diodes, and the lack of enhancement mode devices at these elevated temperatures and the use of conventional direct coupled and buffered direct coupled logic gate design techniques is impossible. The presented logic gate design is tolerant of device parameter distributions and is not hampered by the lack of complementary devices or dropping diodes. In addition to n-channel JFETs, these gates include level-shifting and load resistors (see figure). Instead of relying on precise matching of parameters among individual JFETS, these designs rely on choosing the values of these resistors and of supply potentials so as to make the circuits perform the desired functions throughout the ranges over which the parameters of the JFETs are distributed. The supply rails V(sub dd) and V(sub ss) and the resistors R are chosen as functions of the distribution of direct-current operating parameters of the group of transistors used.

Krasowski, Michael J.↗
NASA NTRS2019

Using Power Diagrams to Build Optimal Unstructured Meshes for C-Grid Models

The Model for Prediction Across Scales (MPAS) for Ocean (-O), Sea-Ice (-SI) and Land-Ice (-LI), in addition to the Coastal Ocean Marine Prediction Across Scales (COMPAS) are two novel general circulation models designed to resolve coupled ocean-ice dynamics over variable spatial scales using non-uniform unstructured grids. Both models are based on a conservative mimetic finite-difference/volume formulation (TRiSK), in which staggered momentum, vorticity and mass-based degrees- of-freedom are distributed over an orthogonal 'primal-dual' mesh.

Engwirda, Darren↗
NASA NTRSDate not supplied

Eigenvalue Sensitivity Computations for Linear Stability Theory

To realize the drag reduction benefit of boundary-layer transition control strategies, it is crucial to integrate transition prediction into the vehicle design through an optimization process. The integration of transition prediction based on linear stability analysis into adjoint d design optimization requires coupling an adjoint enabled computational fluid dynamics (CFD) solver with an adjoint enabled linear stability code. In particular, the boundary-layer transition location is often predicted using the N-factor method based on linear stability theory (LST). Thus, sensitivity of the linear-stability eigenvalues constitute an essential building block for optimizing the laminar flow performance. The present paper describes an implementation of LST eigenvalue sensitivity analysis that can be easily coupled with a CFD solver. Specifically, we describe a discrete adjoint formulation for the transition location prediction based on the N-factor method. The verification of this formulation is carried out by comparing the adjoint-based sensitivity of the local growth rate of a given instability mode with respect to the disturbance frequency, and the adjoint-based sensitivity of the transition location with respect to spanwise wavenumber with those sensitivities computed using a finite-difference approximation. Finally, the adjoint LST formulation is applied to flat-plate boundary-layer flows at transonic, supersonic, and hypersonic conditions, to determine the behavior and sensitivities of the transition location with respect to a range of disturbance spanwise wavenumbers.

Boundary Layer Transition↗
DOE OSTI2022

New Horizons: Scalar and Vector Ultralight Dark Matter

The last decade has seen unprecedented effort in dark matter model building at all mass scales coupled with the design of numerous new detection strategies. Transformative advances in quantum technologies have led to a plethora of new high-precision quantum sensors and dark matter detection strategies for ultralight ($<10\,$eV) bosonic dark matter that can be described by an oscillating classical, largely coherent field. This white paper focuses on searches for wavelike scalar and vector dark matter candidates.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Defect Equilibria from First Principles: From Widegap Oxides to Topological Semimetals

Materials functionality and performance is rarely determined by the ideal crystal alone but is usually affected by formation of imperfections and the solution of impurities. In some applications, such as solar thermochemical hydrogen generation, defect formation is the fundamentally enabling mechanism of the desired functionality. In other cases, such as Cd3As2 topological semimetals, unintentional self-doping presents an obstacle to the access to the unique electronic properties. In either case, a quantitative understanding of the relevant defect mechanism is essential for developing design strategies. This presentation will touch upon numerous aspects in the computational simulation of defect equilibria, including non-equilibrium design strategies, the coupling of solid state and gas-phase reactions, dopant-defect and defect-defect interactions, both attractive and repulsive, the accuracy of total energy functionals and electronic structure methods, and the role of the shape of the density of states for the charge balance condition and Fermi level position, as well as machine-learning prediction of defect energies (1). Specific materials systems include Ga2O3 (2), Cd3As2 (3), and (Sr,Ce)MnO3 (4). (1) M.D. Witman, A. Goyal, T. Ogitsu, A.H. McDaniel, S. Lany, Nat. Comput. Sci. 3, 675 (2023). (2) A. Goyal, A. Zakutayev, V. Stevanovic, S. Lany, J. Appl. Phys. 129, 245704 (2021). (3) C. Brooks, M. van Schilfgaarde, D. Pashov, J.N. Nelson, K. Alberi, D.S. Dessau, S. Lany, Phys. Rev. B 107, 224110 (2023). (4) A. Goyal, M.D. Sanders, R.P. O'Hayre, S. Lany, PRX Energy 3, 013008 (2024).

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS,M↗
NASA NTRS1983

Wedge coupling of lasers into multimode fibers

Design and experimental data for obtuse-angled wedges used in coupled configurations of diode lasers and multimode fibers are presented. An analytic definition of the connection between the wedge angle and the fiber acceptance half-angle is developed, along with a formula for the minimum half-angle. An inequality is defined for determining the bevel angle of the output end of the fiber to eliminate end reflections. The fiber parameters are accounted for in the bevel. The formulations were tested in comparison with the performance of a coupled CDH laser system and good agreement was found in the output spectrum.

Ladany, I.↗
NASA NTRS1972

Hybrid TE panel test results.

Test results are presented for a nine couple (3 x 3 array) thermoelectric panel of hybrid thermocouples. In the hybrid couple, a hollow cylinder of p-type Si-Ge is used to encapsulate a segmented PbTe/Si-Ge n-leg. The hybrid couple is predicted to offer a 10 to 15% improvement in performance relative to all Si-Ge couples. The efficiency, output power, and internal resistance of the panel, as well as the resistances of the individual hybrid couples, are presented as a function of test time covering a period of more than 2600 hours. Initial test results indicated hybrid couple performance consistent with design predictions. However, the 10 to 15% improvement over all-Si-Ge couples demonstrated initially by the hybrid couple was offset by the high resistance that developed following a thermal cycle due to heater failure after 600 hours of testing.

Bifano, W. J.↗
NASA NTRS2004

Aerodynamic Optimization of Rocket Control Surface Geometry Using Cartesian Methods and CAD Geometry

Aerodynamic design is an iterative process involving geometry manipulation and complex computational analysis subject to physical constraints and aerodynamic objectives. A design cycle consists of first establishing the performance of a baseline design, which is usually created with low-fidelity engineering tools, and then progressively optimizing the design to maximize its performance. Optimization techniques have evolved from relying exclusively on designer intuition and insight in traditional trial and error methods, to sophisticated local and global search methods. Recent attempts at automating the search through a large design space with formal optimization methods include both database driven and direct evaluation schemes. Databases are being used in conjunction with surrogate and neural network models as a basis on which to run optimization algorithms. Optimization algorithms are also being driven by the direct evaluation of objectives and constraints using high-fidelity simulations. Surrogate methods use data points obtained from simulations, and possibly gradients evaluated at the data points, to create mathematical approximations of a database. Neural network models work in a similar fashion, using a number of high-fidelity database calculations as training iterations to create a database model. Optimal designs are obtained by coupling an optimization algorithm to the database model. Evaluation of the current best design then gives either a new local optima and/or increases the fidelity of the approximation model for the next iteration. Surrogate methods have also been developed that iterate on the selection of data points to decrease the uncertainty of the approximation model prior to searching for an optimal design. The database approximation models for each of these cases, however, become computationally expensive with increase in dimensionality. Thus the method of using optimization algorithms to search a database model becomes problematic as the number of design variables is increased.

Nelson, Andrea↗
NASA NTRS1980

Single-mode laser studies: Design and performance of a fixed-wave length source and coupling of lasers to thin-film optical waveguides

A module developed for the generation of a stable single wavelength to be used for a fiber optic multiplexing scheme is described. The laser is driven with RZ pulses, and the temperature is stabilized thermoelectrically. The unit is capable of maintaining a fixed wavelength within about 6 A as the pulse duty cycle is changed between 0 and 100 percent. This is considered the most severe case, and much tighter tolerances are obtainable for constant input power coding schemes. Using a constricted double heterostructure laser, a wavelength shift of 0.083 A mA is obtained due to laser self-heating by a dc driving current. The thermoelectric unit is capable of maintaining a constant laser heat-sink temperature within 0.02 C. In addition, miniature lenses and couplers are described which allow efficient coupling of single wavelength modes of junction lasers to thin film optical waveguides. The design of the miniature cylinder lenses and the prism coupling techniques allow 2 mW of single wavelength mode junction laser light to b coupled into thin film waveguides using compact assemblies. Selective grating couplers are also studied.

Ladany, I.↗
DOE OSTI2023

Conceptual Design of Integrated Energy Systems via Multiscale Market Simulations and Surrogate Models for Market Interactions

This final report describes novel capabilities developed as part of DISPATCHES, Design Integration and Synthesis Platform to Advance Tightly Coupled Hybrid Energy Systems, for designing hybrid energy systems (HES) a.k.a. integrated energy systems (IES) in the context of a larger electricity market. Capabilities are demonstrated on case studies for nuclear and renewable power.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Rapid Design and Engineering of Smart and Secure Microbiological Systems (Final Report)

The design and application of successfully engineered biosystems requires an understanding of how engineered microbes will interact with other organisms – either as one-on-one competitors or in the context of microbial consortia. Engineering microorganisms from first principles for non-laboratory, environmental applications is inherently challenging because: (1) engineered systems tend to quickly revert back to their wild-type behaviors; and (2) these systems typically pay a price in reduced fitness, making them uncompetitive against invasive contaminating species (i.e., metabolic burden). For this project, we used a synthetic biology-based strategy to investigate the organization, control, stabilization, and destabilization of natural and engineered microbes. This approach enabled development of (1) single-strain systems capable of detecting and responding to target organisms in the environment; (2) a pipeline for refining and engineering biological constructs in new, non-model host organisms; and (3) improved systems for rapidly designing, engineering, and assaying new biological modules. This coupled approach to safeguard system design is predictable and portable across bacterial species and is focused on microbes that are part of the beneficial plant microbiome. A long-term goal beyond the proposed research is to enable the rational engineering of microbial communities based on first principles of biological design that mimic the smart performance of microorganisms observed in natural systems.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Addressing genome scale design tradeoffs in Pseudomonas putida for bioconversion of an aromatic carbon source

Genome-scale metabolic models (GSMM) are commonly used to identify gene deletion sets that result in growth coupling and pairing product formation with substrate utilization and can improve strain performance beyond levels typically accessible using traditional strain engineering approaches. However, sustainable feedstocks pose a challenge due to incomplete high-resolution metabolic data for non-canonical carbon sources required to curate GSMM and identify implementable designs. Here we address a four-gene deletion design in the Pseudomonas putida KT2440 strain for the lignin-derived non-sugar carbon source, p-coumarate (p-CA), that proved challenging to implement. We examine the performance of the fully implemented design for p-coumarate to glutamine, a useful biomanufacturing intermediate. In this study glutamine is then converted to indigoidine, an alternative sustainable pigment and a model heterologous product that is commonly used to colorimetrically quantify glutamine concentration. Through proteomics, promoter-variation, and growth characterization of a fully implemented gene deletion design, we provide evidence that aromatic catabolism in the completed design is rate-limited by fumarase hydratase (FUM) enzyme activity in the citrate cycle and requires careful optimization of another fumarate hydratase protein (PP_0897) expression to achieve growth and production. A double sensitivity analysis also confirmed a strict requirement for fumarate hydratase activity in the strain where all genes in the growth coupling design have been implemented. Metabolic cross-feeding experiments were used to examine the impact of complete removal of the fumarase hydratase reaction and revealed an unanticipated nutrient requirement, suggesting additional functions for this enzyme. While a complete implementation of the design was achieved, this study highlights the challenge of completely inactivating metabolic reactions encoded by under-characterized proteins, especially in the context of multi-gene edits.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Why Conventional Design Rules for C–H Activation Fail for Open-Shell Transition-Metal Catalysts

The design of selective and active C–H activation catalysts for direct methane-to-methanol conversion is challenging. Bioinspired complexes that form high-valent metal–oxo intermediates capable of hydrogen abstraction and rebound hydroxylation are promising candidates. This promise has made them a target for computational high-throughput screening, typically simplified through the use of linear free energy relationships (LFERs). However, their mid-row transition-metal centers have numerous accessible spin and oxidation states that increase the combinatorial scale of design efforts. Here, we carry out a computational design screen of over 2500 mid-row 3d transition-metal complexes with four metals in numerous spin and oxidation states. We demonstrate the importance of spin/oxidation state in dictating design principles, limiting the generalization of strategies derived for widely studied high-spin Fe(II) catalysts to other metals or spin/oxidation states. Combined assessment of the effect of ligand-field tuning on reaction step energetics and on the identity of the ground state allows us to propose refined design strategies for spin-allowed methane-to-methanol catalysis. We observe weak coupling of energetics and design principles between reaction steps (e.g., oxo formation vs methanol release), meaning that LFERs do not generalize across our larger catalyst set. To rationalize relative reactivity in known catalysts, we instead compute independent reaction energies and propose strategies for further improvements in catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1990

Integrated controls-structures design methodology development for a class of flexible spacecraft

Future utilization of space will require large space structures in low-Earth and geostationary orbits. Example missions include: Earth observation systems, personal communication systems, space science missions, space processing facilities, etc., requiring large antennas, platforms, and solar arrays. The dimensions of such structures will range from a few meters to possibly hundreds of meters. For reducing the cost of construction, launching, and operating (e.g., energy required for reboosting and control), it will be necessary to make the structure as light as possible. However, reducing structural mass tends to increase the flexibility which would make it more difficult to control with the specified precision in attitude and shape. Therefore, there is a need to develop a methodology for designing space structures which are optimal with respect to both structural design and control design. In the current spacecraft design practice, it is customary to first perform the structural design and then the controller design. However, the structural design and the control design problems are substantially coupled and must be considered concurrently in order to obtain a truly optimal spacecraft design. For example, let C denote the set of the 'control' design variables (e.g., controller gains), and L the set of the 'structural' design variables (e.g., member sizes). If a structural member thickness is changed, the dynamics would change which would then change the control law and the actuator mass. That would, in turn, change the structural model. Thus, the sets C and L depend on each other. Future space structures can be roughly divided into four mission classes. Class 1 missions include flexible spacecraft with no articulated appendages which require fine attitude pointing and vibration suppression (e.g., large space antennas). Class 2 missions consist of flexible spacecraft with articulated multiple payloads, where the requirement is to fine-point the spacecraft and each individual payload while suppressing the elastic motion. Class 3 missions include rapid slewing of spacecraft without appendages, while Class 4 missions include general nonlinear motion of a flexible spacecraft with articulated appendages and robot arms. Class 1 and 2 missions represent linear mathematical modeling and control system design problems (except for actuator and sensor nonlinearities), while Class 3 and 4 missions represent nonlinear problems. The development of an integrated controls/structures design approach for Class 1 missions is addressed. The performance for these missions is usually specified in terms of (1) root mean square (RMS) pointing errors at different locations on the structure, and (2) the rate of decay of the transient response. Both of these performance measures include the contributions of rigid as well as elastic motion.

Maghami, P. G.↗