Search NASA⌕ Search

SEARCH · Search NASA

Results for “distribution shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

The Effects of Aerosols on Intense Convective Precipitation in the Northeastern U.S.

A fully coupled meteorology-chemistry-aerosol mesoscale model (WRF-Chem) is used to assess the effects of aerosols on intense convective precipitation over the northeastern United States. Numerical experiments are performed for three intense convective storm days and for two scenarios representing “typical” and “low” aerosol conditions. The results of the simulations suggest that increasing concentrations of aerosols can lead to either enhancement or suppression of precipitation. Quantification of the aerosol effect is sensitive to the metric used due to a shift of rainfall accumulation distribution when realistic aerosol concentrations are included in the simulations. Maximum rainfall accumulation amounts and areas with rainfall accumulations exceeding specified thresholds provide robust metrics of the aerosol effect on convective precipitation. Storms developing over areas with medium to low aerosol concentrations showed a suppression effect on rainfall independent of the meteorologic environment. Storms developing in areas of relatively high particulate concentrations showed enhancement of rainfall when there were simultaneous high values of CAPE, relative humidity and wind shear. In these cases, elevated aerosol concentrations resulted in stronger updrafts and downdrafts and more coherent organization of convection. For the extreme case, maximum rainfall accumulation differences exceeded 40 mm. The modeling results suggest that areas of the northeastern U.S. urban corridor that are close or downwind of intense sources of aerosols, could be more favorable for rainfall enhancement due to aerosols for the aerosol concentrations typical of this area.

54 ENVIRONMENTAL SCIENCES↗

Powder spreading, densification, and part deformation in binder jetting additive manufacturing

Binder jetting additive manufacturing (AM) can print complex structures in economical and scalable manner. Binder jetting AM comprises of deposition and weak binding of particles, known as green part, at room temperature and subsequent binder removal and sintering densification at high temperatures. However, during the densification (i.e., sintering), the part significantly deforms due to volume shrinkage. The deformation during sintering is difficult to predict, which prevents the widespread application of this technology. In this research, powder spreading simulation using discrete element method (DEM) was performed first to capture local variations in powder bed configuration. Second, finite element method (FEM) with a phenomenological continuum constitutive model was used to predict part shrinkage during the sintering process. DEM simulation showed variations in packing density, particle segregation, formation of uneven powder bed surface, and shift in particle size distribution (PSD). The sintering simulation modeled part deformation with a reasonable accuracy of 3% for solid-state sintering and intermediate liquid phase sintering. A demonstration case with non-uniform initial packing density showed that inhomogeneous green part density and PSD should be accounted for prediction of part deformation in binder jetting AM.

36 MATERIALS SCIENCE↗

Novel insight into the kinetics of amide bond glycolysis for nylon-6 depolymerization

Chemical recycling of nylon-6 to short-chain oligomers and monomer ε-caprolactam via catalytic glycolysis is a potential solution for plastic waste remediation. Here, in this work, the kinetics of amide bond glycolysis (with ethylene glycol) in nylon-6 and the model compound N-phenethyl-3-phenylpropanamide (M1) were evaluated at 473 K in the presence of the cyclic amidine catalyst 1,5,7-triazabicyclo[4.4.0]dec-5-ene. Rates of polymer glycolysis were determined by the time-dependent shift in molecular weight distribution, whereas rates of M1 glycolysis were determined using liquid chromatography. The similarity of the first-order rate constants for glycolysis of nylon-6 and M1 at 473 K with 0.03 M amidine catalyst (5 mol% relative to amide bonds), 1.22 × 10 −5 s −1 and 2.18 × 10 −5 s −1 , respectively, confirmed the suitability of M1 as a model compound for nylon-6 glycolysis. Similar rates of glycolysis in the presence of other cyclic amidine catalysts as well as sodium methoxide revealed little influence of base strength. Glycolysis rates were unexpectedly non-linear in catalyst loading and deactivation occurred with long reaction times, presumably by non-selective decomposition of products as detected by liquid chromatography.

Depolymerization rate and rate constant↗

An update to the Sandia method for creating Typical Meteorological Years from a limited pool of calendar years

Typical Meteorological Years (TMYs) are essential for the efficient evaluation of energy system performance. Ideally, 30 years of weather data are required to generate TMYs, but significantly fewer years are typically available due to practical limitations. To address this issue, an update to the Sandia method was developed, referred to as the Argonne method, to create TMYs from a limited number of years. Furthermore, this method enhances candidate diversity by systematically shifting original candidate months forward or backward by specific days, creating an expanded pool of candidates. The effectiveness of the Argonne method was validated through statistical testing, comparison of monthly average weather parameters, and numerical simulations. The results demonstrate a high probability of identifying at least one shifted month whose cumulative distribution functions of weather parameters closely align with long-term distributions. In 67 % of all comparisons, the monthly average weather parameters in TMYs generated using the Argonne method exhibit better agreement with long-term averages than TMY3. Moreover, in 74 % of the 318 building simulation cases, the Argonne method outperforms TMY3 in estimating long-term average building heating and cooling demands. Therefore, the Argonne method effectively diversifies the candidate pool and produces typical years that provide more accurate estimations of long-term averages compared to TMY3 when only a limited pool of calendar years (10 years or fewer) is available.

Building energy modeling↗

Scintillation event imaging with a single photon avalanche diode camera

Position and time measurements of scintillation events encode information about the radiation source. Single photon avalanche diode (SPAD) arrays offer multiple-megapixel spatial resolution and tens of picoseconds temporal resolution for detecting single photons. Current lensless designs for measuring scintillation events use sensors that are lower in spatial resolution. Camera-based designs use sensors that are lower in temporal resolution or readout rate and cannot image individual interactions. Here we propose to image scintillation events in a thick, monolithic scintillator using a high-resolution SPAD camera. We demonstrate that a commercial SPAD camera is able to gather sufficient signal to image individual scintillation events and observe 3D shifts in their spatial distribution. Simulations show that a SPAD camera can localize individual scintillation events in 3D. We report direct imaging of gamma-ray interactions in a scintillator with a SPAD camera. The proposed design may allow to measure complex signatures of individual particles interacting in the scintillator.

47 OTHER INSTRUMENTATION↗

Cosolvent pretreatment in cellulosic biofuel production: Effect of tetrahydrofuran-water on lignin structure and dynamics

The deconstruction of cellulose is an essential step in the production of ethanol from lignocellulosic biomass. However, the presence of lignin hinders this process. Recently, a novel cosolvent based biomass pretreatment method called CELF (Cosolvent Enhanced Lignocellulosic Fractionation) which employs tetrahydrofuran (THF) in a single phase mixture with water, was found to be highly effective at solubilizing and extracting lignin from lignocellulosic biomass and achieving high yields of fermentable sugars. Here, using all-atom molecular-dynamics simulation, we find that THF preferentially solvates lignin, and in doing so, shifts the equilibrium configurational distribution of the biopolymer from a crumpled globule to coil, independent of temperature. Whereas pure water is a bad solvent for lignin, the THF : water cosolvent acts as a "theta" solvent, in which solvent : lignin and lignin : lignin interactions are approximately equivalent in strength. Furthermore, under these conditions, polymers do not aggregate, thus providing a mechanism for the observed lignin solubilization that facilitates unfettered access of celluloytic enzymes to cellulose.

09 BIOMASS FUELS↗

Optimizing microfluidic flow cell geometry for in situ resonant soft X-ray characterization of molecular nanostructures

Liquid-phase resonant soft X-ray scattering (LP-RSoXS) is an emerging label-free technique to probe chemically resolved nanostructures of molecular or hybrid materials in liquid environments. Still, quantitative analysis is hindered by the pressure-induced deformation of thin silicon nitride (SiN) membranes used as windows in microfluidic flow cells, which attenuates the signal in nonlinear ways, making experimental optimization difficult. Here, in this work, we directly characterize this deformation under experimental conditions for a variety of cell configurations. We use this to develop a predictive model that combines transmission effects of SiN bowing, incident X-ray beam profiles, and material-dependent resonant scattering cross sections to simulate the effective scattering intensity at the detector across the carbon K-edge. Maps of the total signal across the flow cell window reveal that increasing the window width and polymer concentration shifts the anisotropic intensity distributions from the center toward the edges of the window. It was determined that an optimal SiN thickness of 50 nm, with a window aperture of 104 μm, maximizes the total signal for typical solute concentrations and energies across the carbon K-edge. Our results overturn the assumption that corner regions dominate the scattering signal, offering explicit design guidelines for maximizing LP-RSoXS signals and significantly advancing the quantitative application of this technique to the characterization of molecular and hybrid nanostructured materials in liquids.

Grabner, Devin [Washington State Univ., Pullman, W↗

Blockage effects in the chemotaxis of diffusiophoretic particles

Transport mechanisms at the micro- and nano-scale play an essential role in regulating intracellular organization. Recent work indicates that directed motion of constituents inside cells can emerge through diffusiophoretic transport, in which colloidal particles move under the influence of chemical gradients. Here, we examine how blockers—passive or actively consuming—reshape those gradients and thereby influence the motion of diffusiophoretic particles. By combining analytical solutions with finite element simulations, we first show that a single blocker can distort a background gradient enough to create or eliminate stagnation points, significantly modifying particle transport. We then introduce a second, explicitly sized blocker at one of these stagnation points and measure how its finite radius alters the diffusiophoretic velocity field for a test particle. Even moderate changes in the second blockers size can cause noticeable shifts in the substrate distribution, highlighting the importance of accounting for explicit particle radii under crowded or consumption-driven conditions. Our findings underscore that subtle geometric variations—such as the radii and positions of two or more blockers—can profoundly affect diffusiophoretic motion, providing a more complete picture of how blocking and crowding phenomena shape intracellular transport.

Song, Zehao [Northwestern Univ., Evanston, IL (Uni↗

Planck 2013 results. XXXI. Consistency of the Planck data

The Planck design and scanning strategy displays many levels of redundancy that can be exploited to provide tests of internal consistency. One of the most important is the comparison of the 70 GHz (amplifier) and 100 GHz (bolometer) channels. Based on different instrument technologies, with feeds located differently in the focal plane, analysed independently by different teams using different software, and near the minimum of diffuse foreground emission, these channels are in effect two different experiments. The 143 GHz channel has the lowest noise level on Planck , and is near the minimum of unresolved foreground emission. In this paper, we analyse the level of consistency achieved in the 2013 Planck data. We concentrate on comparisons between the 70, 100, and 143 GHz channel maps and power spectra, particularly over the angular scales of the first and second acoustic peaks, on maps masked for diffuse Galactic emission and for strong unresolved sources. Difference maps covering angular scales from 8° to 15' are consistent with noise, and show no evidence of cosmic microwave background structure. Including small but important corrections for unresolved-source residuals, we demonstrate agreement (measured by deviation of the ratio from unity) between 70 and 100 GHz power spectra averaged over 70 ≤ ℓ ≤390 at the 0.8% level, and agreement between 143 and 100 GHz power spectra of 0.4% over the same ℓ range. These values are within and consistent with the overall uncertainties in calibration given in the Planck 2013 results. We also present results based on the 2013 likelihood analysis showing consistency at the 0.35% between the 100, 143, and 217 GHz power spectra. We analyse calibration procedures and beams to determine what fraction of these differences can be accounted for by known approximations or systematic errors that could be controlled even better in the future, reducing uncertainties still further. Several possible small improvements are described. Subsequent analysis of the beams quantifies the importance of asymmetry in the near sidelobes, which was not fully accounted for initially, affecting the 70/100 ratio. Correcting for this, the 70, 100, and 143 GHz power spectra agree to 0.4% over the first two acoustic peaks. The likelihood analysis that produced the 2013 cosmological parameters incorporated uncertainties larger than this. We show explicitly that correction of the missing near sidelobe power in the HFI channels would conclude in shifts in the posterior distributions of parameters of less than 0.3σ except for A s , the amplitude of the primordial curvature perturbations at 0.05 Mpc -1 , which changes by about 1σ. We extend these comparisons to include the sky maps from the complete nine-year mission of the Wilkinson Microwave Anisotropy Probe (WMAP), and find a roughly 2% difference between the Planck and WMAP power spectra in the region of the first acoustic peak.

79 ASTRONOMY AND ASTROPHYSICS↗

Highly dense amorphous Nb{sub 2}O{sub 5} films with closed nanosized pores

This study is focused on tailoring the porosity of Nb{sub 2}O{sub 5} films during reactive pulsed magnetron sputtering. Dense amorphous films containing nanopores only in deeper regions have been grown at a high rate using substrate temperatures below 60 deg. C. The films exhibit a high refractive index, n{sub 400}=2.54, a low extinction coefficient, k{sub 400}{approx}6x10{sup -4}, a low mechanical stress (-90 MPa), and a negligible thermal shift. The specific depth distribution of the nanopores is believed to be the reason for the optimum trade-off between a high refractive index and low mechanical stress.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The role of seed electrons on the plasma breakdown and preglow of electron cyclotron resonance ion source

The 14 GHz Electron Cyclotron Resonance Ion Source at University of Jyvaeskylae, Department of Physics (JYFL) has been operated in pulsed mode in order to study the plasma breakdown and preglow effect. It was observed that the plasma breakdown time and preglow characteristics are affected by seed electrons provided by a continuous low power microwave signal at secondary frequency. Sustaining low density plasma during the off-period of high power microwave pulses at the primary frequency shifts the charge state distribution of the preglow transient toward higher charge states. This could be exploited for applications requiring fast and efficient ionization of radioactive elements as proposed for the Beta Beam project within the EURISOL design study, for example. In this article we present results measured with helium and neon.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Built-in electric field and radiative efficiency of polar (0001) and semipolar (11–22) Al{sub 0.5}Ga{sub 0.5}N/GaN quantum dots

We compare the optical properties of ensembles of polar (0001) and semipolar (11–22) Al{sub 0.5}Ga{sub 0.5}N/GaN quantum dots grown by molecular beam epitaxy The polar quantum dot emission shows a huge Stark shift. Using dot height distributions measured by transmission electron microscopy, a simple model allows accounting for the PL energies and lineshapes, and to the screening of the Stark field. The semipolar quantum dots emission show a much weaker Stark effect. High room temperature quantum yields attest the efficiency of 3D-confinement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of magnetic field on laser-produced barium plasmas: Spectral and dynamic behaviour of neutral and ionic species

The expansion dynamics and spectral behaviour of plasma produced by a Nd:YAG laser (λ=1.064 μm, pulse width: 8 ns) from barium target and expanding in 0.45 T transverse magnetic field in vacuum (10⁻⁵Torr pressure) are investigated using time-of-flight optical emission spectroscopy. The experiments are carried out at various laser fluences from 12 to 31 J/cm². The temporal profiles of neutral (Ba I 553.5 and 577.7 nm) lines are temporally broadened, while that of ionic (Ba II 413.0 and 455.4 nm) lines show strong confinement in the presence of a magnetic field. In the absence of magnetic field, the temporal profile of Ba I 553.5 nm is exactly reproduced by fitting with two Shifted Maxwell Boltzmann (SMB) Distribution components, while in the presence of a magnetic field the profile could only be fitted with three components. The field enhanced and field induced SMB components of neutral profile are correlated with populations of ground state, metastable states, and long-lived Rydberg states present in the barium plasma, while SMB components of ionic lines are explained on the basis of the presence of super-elastic collisions among the excited species in the plasma. The spatial variation of electron temperature and temporal variation of electron density are deduced and correlated to the different collisional processes in the barium plasma. The ionic profiles show efficient confinement in the presence of a magnetic field at higher fluences.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ion emission from warm dense matter produced by irradiation with a soft x-ray free-electron laser

Here we report on an experiment performed at the FLASH2 free-electron laser (FEL) aimed at producing warm dense matter via soft x-ray isochoric heating. In the experiment, we focus on study of the ions emitted during the soft x-ray ablation process using time-of-flight electron multipliers and a shifted Maxwell–Boltzmann velocity distribution model. We find that most emitted ions are thermal, but that some impurities chemisorbed on the target surface, such as protons, are accelerated by the electrostatic field created in the plasma by escaped electrons. The morphology of the complex crater structure indicates the presence of several ion groups with varying temperatures. We find that the ion sound velocity is controlled by the ion temperature and show how the ion yield depends on the FEL radiation attenuation length in different materials.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

THE Onfp CLASS IN THE MAGELLANIC CLOUDS

The Onfp class of rotationally broadened, hot spectra was defined some time ago in the Galaxy, where its membership to date numbers only eight. The principal defining characteristic is a broad, centrally reversed He II {lambda} 4686 emission profile; other emission and absorption lines are also rotationally broadened. Recent surveys in the Magellanic Clouds (MCs) have brought the class membership there, including some related spectra, to 28. We present a survey of the spectral morphology and rotational velocities, as a first step toward elucidating the nature of this class. Evolved, rapidly rotating hot stars are not expected theoretically, because the stellar winds should brake the rotation. Luminosity classification of these spectra is not possible, because the principal criterion (He II {lambda}4686) is peculiar; however, the MCs provide reliable absolute magnitudes, which show that they span the entire range from dwarfs to supergiants. The Onfp line-broadening distribution is distinct and shifted toward larger values from those of normal O dwarfs and supergiants with >99.99% confidence. All cases with multiple observations show line-profile variations, which even remove some objects from the class temporarily. Some of them are spectroscopic binaries; it is possible that the peculiar profiles may have multiple causes among different objects. The origin and future of these stars are intriguing; for instance, they could be stellar mergers and/or gamma-ray-burst progenitors.

79 ASTRONOMY AND ASTROPHYSICS↗

THE SLACS SURVEY. VIII. THE RELATION BETWEEN ENVIRONMENT AND INTERNAL STRUCTURE OF EARLY-TYPE GALAXIES

We study the relation between the internal structure of early-type galaxies and their environment using 70 strong gravitational lenses from the SLACS Survey. The Sloan Digital Sky Survey (SDSS) database is used to determine two measures of overdensity of galaxies around each lens-the projected number density of galaxies inside the tenth nearest neighbor ({sigma}{sub 10}) and within a cone of radius one h{sup -1} Mpc (D {sub 1}). Our main results are as follows. (1) The average overdensity is somewhat larger than unity, consistent with lenses preferring overdense environments as expected for massive early-type galaxies (12/70 lenses are in known groups/clusters). (2) The distribution of overdensities is indistinguishable from that of 'twin' nonlens galaxies selected from SDSS to have the same redshift and stellar velocity dispersion {sigma}{sub *}. Thus, within our errors, lens galaxies are an unbiased population, and the SLACS results can be generalized to the overall population of early-type galaxies. (3) Typical contributions from external mass distribution are no more than a few percent in local mass density, reaching 10-20% ({approx}0.05-0.10 external convergence) only in the most extreme overdensities. (4) No significant correlation between overdensity and slope of the mass-density profile of the lens galaxies is found. (5) Satellite galaxies (those with a more luminous companion) have marginally steeper mass-density profiles (as quantified by f {sub SIE} = {sigma}{sub *}/{sigma}{sub SIE} = 1.12 {+-} 0.05 versus 1.01 {+-} 0.01) and smaller dynamically normalized mass enclosed within the Einstein radius ({delta}log M {sub Ein}/M {sub dim} differs by -0.09 {+-} 0.03 dex) than central galaxies (those without). This result suggests that tidal stripping may affect the mass structure of early-type galaxies down to kpc scales probed by strong lensing, when they fall into larger structures.

99 GENERAL AND MISCELLANEOUS↗

THE SIZE, SHAPE, AND ORIENTATION OF COSMOLOGICAL VOIDS IN THE SLOAN DIGITAL SKY SURVEY

We present a detailed description of our void finding algorithm which is an extension of the prescription by Hoyle and Vogeley. We include a discussion of the reproducibility and robustness of the algorithm as well as the statistical significance of the detected voids. We apply our void finder to the Data Release 5 of the Sloan Digital Sky Survey and identify 232 cosmological voids. A void catalog which contains the most salient properties of the detected voids is created. We present a statistical analysis of the distribution of the size, shape, and orientation of our identified cosmological voids. We also investigate possible trends with redshift for 0.04 {<=} z {<=} 0.16. We compare our results to those from an identical analysis of a mock catalog based on the {lambda}CDM model and find reasonable agreement. However, some statistically significant differences in the overall orientation of cosmological voids are exhibited and will have to be reconciled by further refinement of the simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

EFFECTS OF STRONG GRAVITATIONAL LENSING ON MILLIMETER-WAVE GALAXY NUMBER COUNTS

We study the effects of strong lensing on the observed number counts of millimeter sources using a ray-tracing simulation and two number count models of unlensed sources. We employ a quantitative treatment of maximum attainable magnification factor depending on the physical size of the sources, also accounting for effects of lens halo ellipticity. We calculate predicted number counts and redshift distributions of millimeter galaxies including the effects of strong lensing and compare with the recent source count measurements of the South Pole Telescope (SPT). The predictions have large uncertainties, especially the details of the mass distribution in lens galaxies and the finite extent of sources, but the SPT observations are in good agreement with predictions. The sources detected by SPT are predicted to largely consist of strongly lensed galaxies at z > 2. The typical magnifications of these sources strongly depend on both the assumed unlensed source counts and the flux of the observed sources.

79 ASTRONOMY AND ASTROPHYSICS↗