Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrical double layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

A new hydrodynamic analysis of double layers

A genuine two-fluid model of plasmas with collisions permits the calculation of dynamic (not necessarily static) electric fields and double layers inside of plasmas including oscillations and damping. For the first time a macroscopic model for coupling of electromagnetic and Langmuir waves was achieved with realistic damping. Starting points were laser-produced plasmas showing very high dynamic electric fields in nonlinear force-produced cavitous and inverted double layers in agreement with experiments. Applications for any inhomogeneous plasma as in laboratory or in astrophysical plasmas can then be followed up by a transparent hydrodynamic description. Results are the rotation of plasmas in magnetic fields and a new second harmonic resonance, explanation of the measured inverted double layers, explanation of the observed density-independent, second harmonics emission from laser-produced plasmas, and a laser acceleration scheme by the very high fields of the double layers.

Hora, Heinrich↗

Ultra-high-rate pseudocapacitive energy storage in two-dimensional transition metal carbides

In this study, the use of fast surface redox storage (pseudocapacitive) mechanisms can enable devices that store much more energy than electrical double-layer capacitors (EDLCs) and, unlike batteries, can do so quite rapidly. Yet, few pseudocapacitive transition metal oxides can provide a high power capability due to their low intrinsic electronic and ionic conductivity. Here we demonstrate that two-dimensional transition metal carbides (MXenes) can operate at rates exceeding those of conventional EDLCs, but still provide higher volumetric and areal capacitance than carbon, electrically conducting polymers or transition metal oxides. We applied two distinct designs for MXene electrode architectures with improved ion accessibility to redox-active sites. A macroporous Ti 3 C 2 T x MXene film delivered up to 210 F g –1 at scan rates of 10 V s –1 , surpassing the best carbon supercapacitors known. In contrast, we show that MXene hydrogels are able to deliver volumetric capacitance of ~1,500 F cm –3 reaching the previously unmatched volumetric performance of RuO 2 .

25 ENERGY STORAGE↗

Kinetic simulation of capacitively coupled plasmas driven by trapezoidal asymmetric voltage pulses

A kinetic Particle-In-Cell simulation with Monte Carlo Collisions was performed of a geometrically symmetric capacitively coupled, parallel-plate discharge in argon, driven by trapezoidal asymmetric voltage pulses with a period of 200 ns. The discharge was electrically asymmetric, making the ion energy distributions at the two electrodes different from one another. The fraction of the period (α), during which the voltage was kept at a constant (top-flat) positive value, was a critical control parameter. For the parameter range investigated, as α increased, the mean ion energy on the grounded electrode increased and the ions became more directional, whereas the opposite was found for the ions striking the powered electrode. The absolute value of the DC self-bias voltage decreased as α increased. Plasma instabilities, promoted by local double layers and electric field reversals during the time of the positive voltage excursion, were characterized by electron plasma waves launched from the sheath edge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancing corrosion resistance of lightweight metal alloys through laser shock peening

In this study, we investigated the effects of laser shock peening (LSP) on the corrosion resistance of lightweight metal alloys, specifically AA6061 and AZ31. LSP was performed underwater, using a nanosecond pulse laser and without using a protective coating or layer on the workpiece. The corrosion behaviors of these alloys were analyzed through electrochemical tests, including open circuit potential, electrochemical impedance spectroscopy, and potentiodynamic polarization measurements. The results demonstrated that LSP significantly improved the polarization resistance, and higher laser power intensities led to increased corrosion resistance and reduced corrosion rates. This enhancement in anti-corrosion performance is attributed to the formation of a protective oxide layer on the surface, acting as a barrier against corrosion. In conclusion, the findings underscore the potential of laser surface treatment as a viable technique for enhancing the corrosion resistance of lightweight metal alloys.

36 MATERIALS SCIENCE↗

Hydration structure of flat and stepped MgO surfaces

We investigate the solvation structure of flat and stepped MgO(001) in neutral liquid water using ab initio molecular dynamics based on a hybrid density functional with dispersion corrections. Our simulations show that the MgO surface is covered by a densely packed layer of mixed intact and dissociated adsorbed water molecules in a planar arrangement with strong intermolecular H-bonds. The water dissociation fractions in this layer are >20% and >30% on the flat and stepped surfaces, respectively. Slightly above the first water layer, we observe metastable OH groups perpendicular to the interface, similar to those reported in low temperature studies of water monolayers on MgO. Here, these species receive hydrogen bonds from four nearby water molecules in the first layer and have their hydrophobic H end directed toward bulk water, while their associated protons are bound to surface oxygens. The formation of these OH species is attributed to the strong basicity of the MgO surface and can be relevant for understanding various phenomena from morphology evolution and growth of (nano)crystalline MgO particles to heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Imaging Arrangements of Discrete Ions at Liquid–Solid Interfaces

The individual and collective behavior of ions near electrically charged interfaces is foundational to a variety of electrochemical phenomena encountered in biology, energy, and the environment. While many theories have been developed to predict the interfacial arrangements of counterions, direct experimental observations and validations have remained elusive. Utilizing cryo-electron microscopy, here we directly visualize individual counterions and reveal their discrete interfacial layering. Comparison with simulations suggests the strong effects of finite ionic size and electrostatic interactions. We also uncover correlated ionic structures under extreme confinement, with the channel widths approaching the ionic diameter (~1 nm). Finally, our work reveals the roles of ionic size, valency, and confinement in determining the structures of liquid–solid interfaces and opens up new opportunities to study such systems at the single-ion level.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Carbons with Regular Pore Geometry Yield Fundamental Insights into Supercapacitor Charge Storage

We conduct molecular dynamics simulations of electrical double-layer capacitors (EDLCs) using a library of ordered, porous carbon electrode materials called zeolite templated carbons (ZTCs). The well-defined pore shapes of the ZTCs enable us to determine the influence of pore geometry on both charging dynamics and charge storage mechanisms in EDLCs, also referred to as supercapacitors. We show that charging dynamics are negatively correlated with the pore-limiting diameter of the electrode material and display signatures of both progressive charging and ion trapping. However, the equilibrium capacitance, unlike charging dynamics, is not strongly correlated to commonly used, purely geometric descriptors such as pore size. Instead, we find a strong correlation of capacitance to the charge compensation per carbon (CCpC), a descriptor we define in this work as the average charge of the electrode atoms within the coordination shell of a counterion. A high CCpC indicates efficient charge storage, as the strong partial charges of the electrode are able to screen counterion charge, enabling higher ion loading and thus more charge storage within the electrode at a fixed applied voltage. We determine that adsorption sites with a high CCpC tend to be found within pockets with a smaller radius of curvature, where the counterions are able to minimize their distance with multiple points on the electrode surface, and therefore induce stronger local partial charges.

25 ENERGY STORAGE↗

Imaging Fluorescent Nanoparticles To Probe Photoinduced Charging of a Semiconductor–Solution Interface

Optically transparent semiconductors allow simultaneous control of interfacial electrical potential and spectroscopic observation of chemistry near the electrode surface. Care must be taken, however, to avoid unwanted photoexcitation-induced charging of the semiconductor electrode that could influence the results. In this work, we investigate the in situ surface charging by photoexcitation well below the band gap of an optically transparent semiconductor, indium–tin oxide (ITO) electrode. Using total-internal-reflection fluorescence microscopy, the population of ~100-nm negatively charged carboxylate–polystyrene fluorescent nanoparticles at an ITO–aqueous solution interface could be monitored in situ. At positive applied potentials (~0.7 V versus Ag/AgCl), nanoparticles accumulate reversibly in the electrical double-layer of the ITO surface, and the interfacial nanoparticle populations increase with 488-nm excitation intensity. The potential sensitivity of nanoparticle population exhibited no dependence on excitation intensity, varied from 0.1 to 10 W cm –2 , while the onset potential for particle accumulation shifted by as much as 0.3 V. This shift in surface potential appears to be due to photoexcitation-induced charging of the ITO, even though the excitation radiation photon energy, ~2.4 eV, is well below the primary band gap of ITO, >3.5 eV. A kinetic model was developed to determine the photon order of electron–hole generation relative to the electron–hole recombination. The photoexcitation process was found to be first-order in photon flux, suggesting one-photon excitation of an indirect band gap or defect sites, rather than two-photon excitation into the direct band gap. A control experiment was conducted with red-fluorescent carboxylate–polystyrene particles that were counted using 647-nm excitation, where the photon energy is below the indirect band gap or defect site energy and where the optical absorption of the film vanishes. Furthermore, red illumination between 1 and 15 W cm –2 produced no detectable shifts in the onset accumulation potential, which is consistent with the negligible optical absorption of the ITO film at this longer wavelength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the Interplay between Size and Disorder in Suppressing Intercalation-Induced Phase Transitions in Pseudocapacitive Nanostructured MoS 2

Pseudocapacitors are an emerging class of energy storage materials that offer an attractive compromise between the energy density of batteries and power density of electric double-layer capacitors. Decreasing particle size and increasing surface area of battery materials is a common approach for introducing pseudocapacitive behavior and increasing power density. However, in many cases, as the crystal size is reduced, lattice disorder of unknown extent is also introduced, making it difficult to characterize the relative contribution of size and disorder to fast-charging performance. Here, in this work, a series of nanostructured MoS 2 materials are synthesized with different crystallite sizes and degrees of crystallinity to decouple the effects of size and disorder on charge/discharge kinetics. The extent and type of disorder in each material is quantified by total X-ray scattering experiments and pair distribution function analyses. Electrochemical characterization, including galvanostatic rate capability, cyclic voltammetry, and various kinetic analyses, are used to demonstrate that both decreasing particle size and introducing lattice disorder are effective strategies for increasing charge storage kinetics, and that the effects are additive. Finally, operando X-ray diffraction measurements show that both size and disorder can be used suppress first-order Li + intercalation-induced phase transitions, a key feature for enabling pseudocapacitive charge storage.

36 MATERIALS SCIENCE↗

In Situ Probing of Ion Ordering at an Electrified Ionic Liquid/Au Interface

Charge transport at the interface of electrodes and ionic liquids is critical for the use of the latter as electrolytes. In this study, a room-temperature ionic liquid, 1-ethyl-2,3-dimethylimidazolium bis(trifluoromethanesulfonyl)imide (EMMIM TFSI), is investigated in situ under applied bias voltage with a novel method using low-energy electron and photoemission electron microscopy. Changes in photoelectron yield as a function of bias applied to electrodes provide a direct measure of the dynamics of ion reconfiguration and electrostatic responses of the EMMIM TFSI. Finally, long-range and correlated ionic reconfigurations that occur near the electrodes are found to be a function of temperature and thickness, which, in turn, relate to ionic mobility and different configurations for out-of-plane ordering near the electrode interfaces, with a critical transition in ion mobility for films thicker than three monolayers.

36 MATERIALS SCIENCE↗

Modeling electrokinetics in ionic liquids: General

Using direct numerical simulations we provide a thorough study on the electrokinetics of ionic liquids. In particular, the modfied Poisson-Nernst-Planck (MPNP) equations are solved to capture the crowding and overscreening effects that are the characteristics of an ionic liquid. For modeling electrokinetic flows in an ionic liquid, the MPNP equations are coupled with the Navier-Stokes equations to study the coupling of ion transport, hydrodynamics, and electrostatic forces. Specifically, we consider the ion transport between two parallel plates, charging dynamics in a 2D straight-walled pore, electro-osmotic ow in a nano-channel, electroconvective instability on a plane ion-selective surface, and electroconvective ow on a curved ion-selective surface. We discuss how the crowding and overscreening effects and their interplay affect the electrokinetic behaviors of ionic liquids in these application problems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Particulate Generation on Surface of Iron Selenide Films by Air Exposure

Nanometer-sized particular structures are generated on the surfaces of FeSe epitaxial films directly after exposure to air; this phenomenon was studied in the current work because these structures are an obstacle to field-induced superconductivity in electric double-layer transistors using FeSe channel layers. Chemical analyses using field-effect scanning Auger electron spectroscopy revealed no clear difference in the chemical composition between the particular structures and the other flat surface region. This observation limits the possible origins of the particulate formation to light elements in air such as O, C, H, and N.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication of ultrafine manganese oxide-decorated carbon nanofibers for high-performance electrochemical capacitors

Ultrafine manganese oxide-decorated carbon nanofibers (MnOn-CNF) as a new type of electrode materials are facilely fabricated by direct conversion of Mn, Zn-trimesic acid (H3BTC) metal organic framework fibers (Mn-ZnBTC). The construction and evolution of Mn-ZnBTC precursors are investigated by SEM and in situ high-energy XRD. The manganese oxides are highly dispersed onto the porous carbon nanofibers formed simultaneously, verified by TEM, X-ray absorption fine structure (XAFS), Raman, ICP-AES and N2 adsorption techniques. As expected, the resulting MnOn-CNF composites are highly stable, and can be cycled up to 5000 times with a high capacitance retention ratio of 98% in electrochemical capacitor measurements. They show a high capacitance of up to 179 F g–1 per mass of the composite electrode, and a remarkable capacitance of up to 18290 F g–1 per active mass of the manganese(IV) oxide, significantly exceeding the theoretical specific capacitance of manganese(IV) oxide (1370 F g–1). The maximum energy density is up to 19.7 Wh kg–1 at the current density of 0.25 A g–1, even orders higher than those of reported electric double-layer capacitors and pseudocapacitors. The excellent capacitive performance can be ascribed to the joint effect of easy accessibility, high porosity, tight contact and superior conductivity integrated in final MnOn-CNF composites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon-encapsulated niobium carbonitride with high volumetric capacitance and wide potential windows in aqueous pseudocapacitors

Electrochemical capacitors deliver high power and have long operational lives; yet, their energy densities are limited. Compared to carbon-based electrical double-layer capacitors, pseudocapacitors with an aqueous electrolyte are predicated to provide both high gravimetric and volumetric capacitance while being cost-effective and eco-friendly. However, their narrow operational potential windows limit the practical delivery of energy. In this study, we synthesized novel NbCxN1-x nanoparticles encapsulated in a uniform carbon layer. This pseudocapacitive material exhibits a high volumetric capacitance, a wide potential window stability (~345 F cm –3 , 2.1 V, in 1 M of Li 2 SO 4 ), and a long cycling life (>10 000 cycles). Moreover, the symmetric cells (2.2 V, in 1 M of Li 2 SO 4 ) exhibit high energy density as well as excellent cyclability and rate performances. These results offer new chances for the design of aqueous energy storage devices having a wide applied potential difference and excellent performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Facile synthesis of nitrogen-doped porous carbon as robust electrode for supercapacitors

Highlights: • An efficient and facile method is developed to prepare porous N doped carbon. • A high areal capacitance of 682.8 mF cm{sup −2} is achieved by this electrode. • This electrode also exhibit outstanding cycling preformance. - Abstract: Porous carbon nanomaterials are highly attactive as electrode materials for supercapacitors (SCs), but the relatively low capacitance as a result of their intrinsic electric double-layer mechanism severely hinders their practical applications. In addition, the complicated preparation processes of most porous carbon nanomaterials previously reported is less impressive for large-scale application. In this work, we report an efficient and simple method to synthesize porous N doped carbon (PNC) on flexible carbon cloth as high-performance electrode for SCs. Benefiting from the unique porous architecture and high N dopant content, the as-fabricated PNC electrode delivers excellent capacitive performance. A high areal capacitance of 682.8 mF cm{sup −2} at 2 mA cm{sup −2} and outstanding cycling performance (less than 4% capacitance fading after 10,000 cycles) is achieved by this PNC electrode. This work opens up new opportunities in developing advanced carbon-based electrode for energy storage.

36 MATERIALS SCIENCE↗