Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrode interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Mechanistic Insights into the Surface Instabilities of TiNb 2 O 7, a High‐Power Li‐Ion Anode

TiNb 2 O 7 (TNO) is a promising Li-ion battery anode for high-power applications, such as implantable medical devices and heavy-duty equipment. Hailed as being safe due to its elevated operating potential near 1.6 V, TNO has long been assumed to be highly stable in the carbonate-based electrolytes used in Li-ion batteries. Herein, all mechanisms occurring at the surface of both TNO and Nd-doped TNO are identified, and both materials in fact show significant gassing. CO 2 is even released at open circuit conditions, demonstrating the poor chemical stability of the material in the electrolyte even prior to battery operation. Such extreme instability is a critical safety concern. In addition, it was found that Ti dissolves from the surface of TNO particles at low voltage (below 1.4 V vs Li), and in fact deposits on the counter electrode. Ti further inside TNO particles then diffuses to the Ti-poor surface during discharge. Partial carbon-coating as a mitigating measure has also been tested and found to exacerbate these processes. The findings identify novel reactions occurring within TNO, and clearly highlight the need to stabilize the surfaces of TNO in order to prevent such aggressive deterioration at the surface of the particles.

25 ENERGY STORAGE↗
DOE OSTI2018

3D Self-Architectured Steam Electrode Enabled Efficient and Durable Hydrogen Production in a Proton-Conducting Solid Oxide Electrolysis Cell at Temperatures Lower Than 600 °C

Hydrogen production via water electrolysis using solid oxide electrolysis cells (SOECs) has attracted considerable attention because of its favorable thermodynamics and kinetics. It is considered as the most efficient and low-cost option for hydrogen production from renewable energies. By using proton-conducting electrolyte (H-SOECs), the operating temperature can be reduced from beyond 800 to 600 °C or even lower due to its higher conductivity and lower activation energy. Technical barriers associated with the conventional oxygen-ion conducting SOECs (O-SOECs), that is, hydrogen separation and electrode instability that is primarily due to the Ni oxidation at high steam concentration and delamination associated with oxygen evolution, can be remarkably mitigated. Here, a self-architectured ultraporous (SAUP) 3D steam electrode is developed for efficient H-SOECs below 600 °C. At 600 °C, the electrolysis current density reaches 2.02 A cm –2 at 1.6 V. Instead of fast degradation in most O-SOECs, performance enhancement is observed during electrolysis at an applied voltage of 1.6 V at 500 °C for over 75 h, attributed to the “bridging” effect originating from reorganization of the steam electrode. The H-SOEC with SAUP steam electrode demonstrates excellent performance, promising a new prospective for next-generation steam electrolysis at reduced temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electrolyte Design and Optimization for Alkali Metal‐Sulfur Batteries

Alkali metal-sulfur batteries, including lithium-sulfur (Li-S), sodium-sulfur (Na-S), and potassium-sulfur (K-S) systems, have garnered significant attention as promising electrochemical energy storage (EES) technologies. Among them, Li-S batteries stand out as strong contenders for next-generation energy storage, owing to their high energy density and the cost-effectiveness of sulfur-based cathodes. However, with the rapid technological advances and the escalating energy demand, lithium resources are becoming increasingly scarce, making it imperative to explore alternative metal anodes to replace lithium. Therefore, Na-S and K-S batteries, serving as counterparts to Li-S systems, are emerging as formidable contenders for next-generation energy storage technologies due to the abundant and cost-effective nature of sodium and potassium. Although Na-S and K-S batteries possess considerable potential in the energy sector, their development is still in its infancy, with performance constrained by the nascent state of electrolyte design and optimization. This review article provides a comprehensive overview of recent advancements and developments in liquid electrolytes for alkali metal-sulfur batteries. Additionally, it identifies key challenges and proposes future research directions aimed at enhancing electrolyte stability, optimizing interfacial compatibility, and improving the overall performance of alkali metal-sulfur batteries.

25 ENERGY STORAGE↗
DOE OSTI2018

Ab initio simulations of liquid electrolytes for energy conversion and storage

Understanding physicochemical properties of liquid electrolytes is essential for predicting and optimizing device performance for a wide variety of emerging energy technologies, including photoelectrochemical water splitting, supercapacitors, and batteries. We review recent progress and open challenges in predicting structural, dynamical, and electronic properties of the liquids using first-principles approaches. We briefly summarize the basic concepts of first-principles molecular dynamics (FPMD), and we discuss how FPMD methods have enriched our understanding of a number of liquids, including aqueous solutions, organic electrolytes and ionic liquids. We also discuss technical challenges in extending FPMD simulations to the study of liquid electrolytes in more complex environments, including the interface between electrolytes and electrodes, which is a key component in many energy storage and conversion systems.

25 ENERGY STORAGE↗
DOE OSTI2023

Understanding the Role of Zinc Hydroxide Sulfate and its Analogues in Mildly Acidic Aqueous Zinc Batteries: A Review

Abstract Mildly acidic aqueous zinc batteries (AZBs) have attracted tremendous attention for grid storage applications with the expectation to tackle the issues of Li‐ion batteries on high cost and poor safety. However, the performance, particularly energy density and cycle stability of AZBs are still unsatisfactory when compared with LIBs. To help the development of AZBs, a lot of effort have been made to understand the battery reaction mechanisms and precedent microscopic and spectroscopic analyses have shown flake‐like large particles of zinc hydroxide sulfate (ZHS) and its analogues formed on the surfaces of cathodes and anodes in sulfate and other electrolyte systems during cycling. However, because of the complexity of the thermodynamics and kinetics of aqueous reactions to understand different battery conditions, controversies still exist. This article will review the roles of ZHS discussed in recent representative references aiming to shine light on the fundamental mechanisms of AZBs and pave ways to further improve the battery performance.

25 ENERGY STORAGE↗
DOE OSTI2018

Speciation and Electronic Structure of La 1-x Sr x CoO 3-δ During Oxygen Electrolysis

Cobalt-containing perovskite oxides are promising electrocatalysts for the oxygen evolution reaction (OER) in alkaline electrolyzers. However, a lack of fundamental understanding of oxide surfaces impedes rational catalyst design for improved activity and stability. We couple electrochemical studies of epitaxial La 1-x Sr x CoO 3-δ films with in situ and operando ambient pressure X-ray photoelectron spectroscopy to investigate the surface stoichiometry, adsorbates, and electronic structure. Additionally, in situ investigations spanning electrode compositions in a humid environment indicate that hydroxyl and carbonate affinity increase with Sr content, leading to an increase in binding energy of metal core levels and the valence band edge from the formation of a surface dipole. The maximum in hydroxylation at 40% Sr is commensurate with the highest OER activity, where activity scales with greater hole carrier concentration and mobility. Furthermore, operando measurements of the 20% Sr-doped oxide in alkaline electrolyte indicate that the surface stoichiometry remains constant during OER, supporting the idea that the oxide electrocatalyst is stable and behaves as a metal, with the voltage drop confined to the electrolyte. Furthermore, hydroxyl and carbonate species are present on the electrode surface even under oxidizing conditions, and may impact the availability of active sites or the binding strength of adsorbed intermediates via adsorbate–adsorbate interactions. For covalent oxides with facile charge transfer kinetics, the accumulation of hydroxyl species with oxidative potentials suggests the rate of reaction could be limited by proton transfer kinetics. This operando insight will help guide modeling of self-consistent oxide electrocatalysts, and highlights the potential importance of carbonates in oxygen electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Enhancing Chemical Stability and Suppressing Ion Migration in CH 3 NH 3 PbI 3 Perovskite Solar Cells via Direct Backbone Attachment of Polyesters on Grain Boundaries

Organic–inorganic halide perovskites feature excellent optoelectronic properties but poor chemical stability. While passivating perovskite grain boundary (GB) by polymers shows prospects on long-term performance of perovskite solar cells (PSCs), its detailed impact on the ion migration phenomenon, which largely deteriorates the PSC stability, remains less probed. In this work, we introduce a new polar polymer, polycaprolactone (PCL), to passivate GBs of methylammonium lead triiodide (MAPbI 3 ) perovskite with only 1–2 polymer monolayers via direct backbone attachment. The PSCs with passivated MAPbI 3 , using a classic but less stable Spiro-OMeTAD (2,2',7,7'-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9'-spirobifluorene) hole transport layer (HTL), exhibit improved power conversion efficiencies up to 20.1%, with 90% of the initial PCE being preserved after 400 h ambient storage, and 80% even after 100 h, 85 °C aging. The improved PSC stability indicates critical roles of PCL GB passivation in retarding moisture-induced decomposition and suppressing ion migration within the perovskite. Furthermore, time-of-flight secondary ion mass spectrometry reveals that I– ions can actively migrate into the electrode, HTL, and their interface in nonpassivated PSCs, even without an externally applied electric field, while such migration is significantly mitigated in PCL-passivated PSCs. This effective GB passivation by PCL suggests an important potential of polymer additives toward the development of stable high-performance PSCs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Gas Evolution in Water Electrolysis

Gas bubbles generated by the hydrogen evolution reaction and oxygen evolution reaction during water electrolysis influence the energy conversion efficiency of hydrogen production. Here we survey what is known about the interaction of gas bubbles and electrode surfaces and the influence of gas evolution on practicable devices used for water electrolysis. Here, we survey the physical processes occurring during the life cycle of a bubble, summarize techniques used to characterize gas evolution phenomena in-situ and in practical device environments, and discuss ways that electrodes can be tailored to facilitate gas removal at high current densities. Lastly, we summarize efforts to model the behavior of individual gas bubbles and multiphase flows produced at gas evolving electrodes. We conclude our review with a short summary of outstanding questions which could be answered by future efforts to characterize gas evolution in electrochemical device environments or by improved simulations of multiphase flows.

Bubbles↗
DOE OSTI2020

Rechargeable Alkali-Ion Battery Materials: Theory and Computation

Since its development in the 1970s, the rechargeable alkali-ion battery has proven to be a truly transformative technology, providing portable energy storage for devices ranging from small portable electronics to sizable electric vehicles. Here, we present a review of modern theoretical and computational approaches to the study and design of rechargeable alkali-ion battery materials. Additionally, starting from fundamental thermodynamics and kinetics phenomenological equations, we rigorously derive the theoretical relationships for key battery properties, such as voltage, capacity, alkali diffusivity, and other electrochemically relevant computable quantities. We then present an overview of computational techniques for the study of rechargeable alkali-ion battery materials, followed by a critical review of the literature applying these techniques to yield crucial insights into battery operation and performance. Finally, we provide perspectives on outstanding challenges and opportunities in the theory and computation of rechargeable alkali-ion battery materials.

25 ENERGY STORAGE↗
DOE OSTI2021

Surface Dynamics of Charge Transport in LaAlO 3 /SrTiO 3 with Time-Resolved Kelvin Probe Force Microscopy

Time-resolved Kelvin probe force microscopy (tr-KPFM) was used to map surface potential dynamics in LAO/STO under its critical thickness, where it acts as an insulator, as polarizing and depolarizing electric fields were applied to planar electrodes in ambient conditions. Two time constants, for polarization and relaxation (i.e., depolarization) each, were derived and were shown to be independent of the direction of electrical field, revealing the reproducibility and recovery of the surfaces. Ambient aging or recent electrical history did not change the surface kinetics as determined by tr-KPFM. During polarization, the faster time constant (~3–6 s) is likely associated with the transport of H+ ions through the full length of the channel. The slower time constant (~40–50 s), on the other hand, is observed across only half the channel width near the higher-potential–more positive–electrode, which is likely associated with an electrochemical reaction such as the dissociation of water. This slower time constant drops to ~10–20 s toward the middle of the channel which could represent the transport of OH– ions. Furthermore, during relaxation, the fast time constant is consistent with polarization and is correlated to the same mechanism while the slower time constant is higher than it was during polarization and may represent the reabsorption of moisture from the atmosphere.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Role of Salt Concentration on Interphase Dynamics and Chemistry of Silicon Anodes during Electrochemical Cycling

We investigated the chemistry and structure of the solid electrolyte interphase (SEI) grown over a silicon anode as a function of the lithium salt concentration. In these experiments, in situ neutron reflectivity measurements were performed to measure the thickness and composition of the SEI formed from 1.0 and 5.5 M lithium bis(trifluoromethane)sulfonimide (LiTFSI) in standard ethylene carbonate:dimethyl carbonate electrolytes. These measurements reveal the formation of a 350+ Å thick SEI layer that is predominantly organic (∼80%) and dimensionally stable when using a 1.0 M salt solution. In contrast, increasing the salt concentration to 5.5 M resulted in an SEI that exhibited thickness changes from 100 to 375 Å and became up to 30% inorganic. In conclusion, these compositional and structural changes point to the role of salt speciation on the resulting passivation of silicon electrodes and indicate the need to form more organic-like passivation layers to promote the calendar life of silicon anodes.

Electrodes↗
DOE OSTI2020

Probing Depth-Dependent Transition-Metal Redox of Lithium Nickel, Manganese, and Cobalt Oxides in Li-Ion Batteries

Layered lithium nickel, manganese, and cobalt oxides (NMC) are among the most promising commercial positive electrodes in the past decades. Understanding the detailed surface and bulk redox processes of Ni-rich NMC can provide useful insights into material design options to boost reversible capacity and cycle life. Both hard X-ray absorption (XAS) of metal K-edges and soft XAS of metal L-edges collected from charged LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) and LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) showed that the charge capacity up to removing ~0.7 Li/f.u. was accompanied with Ni oxidation in bulk and near the surface (up to 100 nm). Of significance to note is that nickel oxidation is primarily responsible for the charge capacity of NMC622 and 811 up to similar lithium removal (~0.7 Li/f.u.) albeit charged to different potentials, beyond which was followed by Ni reduction near the surface (up to 100 nm) due to oxygen release and electrolyte parasitic reactions. Overall, this observation points toward several new strategies to enhance reversible redox capacities of Ni-rich and/or Co-free electrodes for high-energy Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Understanding the Roles of the Electrode/Electrolyte Interface for Enabling Stable Li∥Sulfurized Polyacrylonitrile Batteries

Sulfurized polyacrylonitrile (SPAN) is a promising high-capacity cathode material. Here, we use spatially resolved X-ray absorption spectroscopy combined with X-ray fluorescence (XRF) microscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy to examine the structural transformation of SPAN and the critical role of a robust cathode–electrolyte interface (CEI) on the electrode. LiS x species forms during the cycling of SPAN. However, in carbonate-based electrolytes and ether-based electrolytes with LiNO 3 additives, these species are well protected by the CEI and do not dissolve into the electrolytes. In contrast, in an ether-based electrolyte without the LiNO 3 additive, LiS x species dissolve into the electrolyte, resulting in the shuttle effect and capacity loss. Examination of the Li anode by XRF and SEM reveals dense spherical Li morphology in ether-based electrolytes, but sulfur is present in the absence of the LiNO 3 additive. In contrast, porous dendritic Li is found in the carbonate electrolyte. These analyses established that an ether-based electrolyte with LiNO 3 is a superior choice that enables stable cycling of both electrodes. Based on these insights, we successfully demonstrate the stable cycling of high areal loading SPAN cathode (>6.5 mA h cm –2 ) with lean electrolyte amounts, showing promising Li∥SPAN cell performance under practical conditions.

25 ENERGY STORAGE↗
DOE OSTI2025

Scalable Solution-Processed Electrolyte Membranes with Optimized Microstructure for High-Performance Protonic Ceramic Electrochemical Cells

Proton-conducting electrochemical cells (PCECs) are promising for efficient hydrogen production, but achieving dense, uniform, thin electrolyte layers remains a key challenge, particularly for scalable fabrication. Here, we present a solution-processed deposition approach with a mechanistically optimized slurry for uniform electrolyte formation. By tailoring particle size distribution, solid loading, and solvent/additive balance, we regulated wetting behavior and evaporation kinetics of the electrolyte slurry to promote homogeneous electrolyte particle packing. These features facilitate tight grain boundary contact and early stage neck growth during sintering, eliminating residual porosity, and improving mechanical integrity. The resulting ∼15 μm thick electrolyte shows high density, strong electrode adhesion, and stable interfaces outperforming the previously reported spray-based fabricated electrolyte by about 31% at 600 °C in FC mode. Single cells deliver 0.962 W cm –2 at 600 °C in fuel cell mode and 1.31 A cm –2 at 1.3 V in electrolysis mode, maintaining robust performance over 100 h with negligible degradation (≤0.02% h –1 ) in each mode. Scale-up to 2.5 cm diameter substrates confirmed reproducible densification and geometric stability. This work demonstrates a cost-effective, scalable route where control over particle-fluid interactions and drying dynamics enables a superior electrolyte microstructure and high PCEC performance.

dense microstructure↗
DOE OSTI2017

Deliberately Designed Atomic-Level Silver-Containing Interface Results in Improved Rate Capability and Utilization of Silver Hollandite for Lithium-Ion Storage

α-MnO 2 -structured materials are generally classified as semiconductors, thus we present a strategy to increase electrochemical utilization through design of a conductive material interface. Surface treatment of silver hollandite (Ag x Mn 8 O 16 ) with Ag + (Ag 2 O) provides significant benefit to the resultant electrochemistry, including a decreased charge transfer resistance, and a 2-fold increase in deliverable energy density at high rate. The improved function of this designed interface relative to conventional electrode fabrication strategies is further highlighted.

25 ENERGY STORAGE↗
DOE OSTI2017

Understanding materials challenges for rechargeable ion batteries with in situ transmission electron microscopy

An in-depth understanding of material behaviours under complex electrochemical environment is critical for the development of advanced materials for the next-generation rechargeable ion batteries. The dynamic conditions inside a working battery had not been intensively explored until the advent of various in situ characterization techniques. Real-time transmission electron microscopy of electrochemical reactions is one of the most significant breakthroughs poised to enable radical shift in our knowledge on how materials behave in the electrochemical environment. This review, therefore, summarizes the scientific discoveries enabled by in situ transmission electron microscopy, and specifically emphasizes the applicability of this technique to address the critical challenges in the rechargeable ion battery electrodes, electrolyte and their interfaces. New electrochemical systems such as lithium–oxygen, lithium–sulfur and sodium ion batteries are included, considering the rapidly increasing application of in situ transmission electron microscopy in these areas. A systematic comparison between lithium ion-based electrochemistry and sodium ion-based electrochemistry is also given in terms of their thermodynamic and kinetic differences. The effect of the electron beam on the validity of in situ observation is also covered. This review concludes by providing a renewed perspective for the future directions of in situ transmission electron microscopy in rechargeable ion batteries.

25 ENERGY STORAGE↗