SEARCH · Search NASA
Results for “electrolyte structure”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
In-situ X-ray absorption spectroscopy analysis of capacity fade in nanoscale-LiCoO{sub 2}
The local structure of nanoscale (∼10–40 nm) LiCoO{sub 2} is monitored during electrochemical cycling utilizing in-situ X-ray absorption spectroscopy (XAS). The high surface area of the LiCoO{sub 2} nanoparticles not only enhances capacity fade, but also provides a large signal from the particle surface relative to the bulk. Changes in the nanoscale LiCoO{sub 2} metal-oxide bond lengths, structural disorder, and chemical state are tracked during cycling by adapting the delta mu (Δμ) technique in complement with comprehensive extended X-ray absorption fine structure (EXAFS) modeling. For the first time, we use a Δμ EXAFS method, and by comparison of the difference EXAFS spectra, extrapolate significant coordination changes and reduction of cobalt species with cycling. This combined approach suggests Li–Co site exchange at the surface of the nanoscale LiCoO{sub 2} as a likely factor in the capacity fade and irreversible losses in practical, microscale LiCoO{sub 2}. - Graphical abstract: Electrochemical cycling of Li-ion batteries has strong impact on the structure and integrity of the cathode active material particularly near the surface/electrolyte interface. In developing a new method, we have used in-situ X-ray absorption spectroscopy during electrochemical cycling of nanoscale LiCoO{sub 2} to track changes during charge and discharge and between subsequent cycles. Using difference spectra, several small changes in Co-O bond length, Co-O and Co-Co coordination, and site exchange between Co and Li sites can be tracked. These methods show promise as a new technique to better understand processes which lead to capacity fade and loss in Li-ion batteries. - Highlights: • A new method is developed to understand capacity fade in Li-ion battery cathodes. • Structural changes are tracked during Li intercalation/deintercalation of LiCoO{sub 2}. • Surface structural changes are emphasized using nanoscale-LiCoO{sub 2} and difference spectra. • Full multiple scattering calculations are used to support Δμ analysis.
Fluorine-free water-in-ionomer electrolytes for sustainable lithium-ion batteries
The continuously increasing number and size of lithium-based batteries developed for large-scale applications raise serious environmental concerns. Herein, we address the issues related to electrolyte toxicity and safety by proposing a "water-in-ionomer" type of electrolyte which replaces organic solvents by water and expensive and toxic fluorinated lithium salts by a non-fluorinated, inexpensive and non-toxic superabsorbing ionomer, lithium polyacrylate. Interestingly, the electrochemical stability window of this electrolyte is extended greatly, even for high water contents. Particularly, the gel with 50 wt% ionomer exhibits an electrochemical stability window of 2.6 V vs. platinum and a conductivity of 6.5 mS cm -1 at 20 °C. Structural investigations suggest that the electrolytes locally self-organize and most likely switch local structures with the change of water content, leading to a 50% gel with good conductivity and elastic properties. A LiTi 2 (PO 4 ) 3 /LiMn 2 O 4 lithium-ion cell incorporating this electrolyte provided an average discharge voltage > 1.5 V and a specific energy of 77 Wh kg -1 , while for an alternative cell chemistry, i.e., TiO 2 /LiMn 2 O 4 , a further enhanced average output voltage of 2.1 V and an initial specific energy of 124.2 Wh kg -1 are achieved.
Lithium Solvation and Mobility in Ionic Liquid Electrolytes with Asymmetric Sulfonyl-Cyano Anion
The solvation structure and transport properties of Li + in ionic liquid (IL) electrolytes based on n-methyl-n-butylpyrrolidinium cyano(trifluoromethanesulfonyl)imide [PYR 14 ][CTFSI] and [Li][CTFSI] (0 ≤ x Li ≤ 0.7) were studied by Raman and Nuclear Magnetic Resonance (NMR) diffusometry, and molecular dynamics (MD) simulations. At x Li < 0.3, Li + coordination is dominated by the cyano group. As x Li is increased, free cyano-sites become limited, resulting in increased coordination via the sulfonyl group. Here, the 1:1 mixture of the symmetric anions bis(trifluoromethanesulfonyl)imide ([TFSI]) and dicyanamide ([DCA]) results in similar physical properties as the IL with [CTFSI]. However, anion asymmetry is shown to increase Li-salt solubility and promote Li+ transference. The lifetimes of Li + -cyano coordination for [CTFSI] are calculated to be shorter than those for [DCA], indicating that the competition from the sulfonyl group weakens its solvation with Li + . This resulted in higher Li + transference for the electrolyte with [CTFSI]. In relation to the utility of these electrolytes in energy storage, the Li–LiFePO 4 half cells assembled with IL electrolyte (x Li = 0.3, 0.5, and 0.7) demonstrated a nominal capacity of 140 mAh/g at 0.1C rate and 90 °C where the cell with x Li = 0.7 IL electrolyte demonstrated 61% capacity retention after 100 cycles and superior rate capability owing to increased electrochemical stability.
Nano-micro-structured Graphene Film Electrodes for Enhanced Performance of Supercapacitors
The graphene structures at either nanoscale and microscale are important to the film electrode performance. At nanoscale, a molecular engineering approach (i.e., molecular ligand grafting) was used to control the interspacing between restacked graphene sheets. At microscale, this work applied an external field to align the graphene sheets along the field direction during the film deposition from liquid slurry of molecularly engineered graphene. Five different ligand molecules were effectively grafted on the surfaces of well-dispersed graphene oxides (GOs) in liquid suspension and chemically reduced to GOs (rGOs), which then were modified by grafted molecules to form (m-rGOs). XRD data shows well controlled nanometer sized interlayer spacings between the re-stacked sheets of m-rGOs. Then, we investigated the effects of ligand grafting on the deposit film structure. Their baseline electrochemical cell performance was evaluated by different aqueous electrolytes (e.g., H2SO4 vs. KOH) for the following external field alignment. Initially, the m-rGO film electrodes exhibited higher capacitance performance with H2SO4 electrolyte, compared with KOH. Also, the external field has rendered the graphene sheets oriented velrtically to the film surface, resulting in enhanced capacitance due to enhanced diffusion and accessibility of electrolyte ions into the graphene film structure. Aligning graphene nanosheets in film deposits via external field could be a novel versatile fabrication technique to tailor microscopic architecture of graphene coatings for high performance supercapacitor.
In situ imaging of orthoclase-aqueous solution interfaces with x-ray reflection interface microscopy
The use of x-ray reflection interface microscopy (XRIM) to image molecular-scale topography at the aqueous-solid interface, in situ, is described. Specifically, we image interfacial topography of the orthoclase-(001)-aqueous solution interface at room temperature and describe the challenges associated with in situ XRIM imaging. The measurements show that the reflectivity signal for in situ XRIM measurements is substantially smaller than that for ex situ measurements, because of both intrinsic and extrinsic factors. There is also a systematic temporal reduction in the image intensity with increasing x-ray dose, revealing that interaction of the focused x-ray beam with the orthoclase interfaces leads to interfacial perturbations, presumably in the form of surface roughening. This image fading is localized to the x-ray beam footprint, suggesting that the primary damage mechanism is initiated by photoelectrons produced by x-ray beam absorption near the substrate-electrolyte interface. Finally, the role of aqueous solution composition in controlling the sensitivity of the orthoclase surface to x-ray beam-induced effects is explored. A substantial increase in the orthoclase (001) surface stability was observed in solutions having elevated ionic strength, apparently as a result of the reduced lifetime of radiation chemistry products at these conditions.
Electrolytes at Solid-Water Interfaces: Theoretical Studies for Practical Applications
The goal of this research program was to determine how a solid substrate affects structure and dynamics of aqueous electrolyte solutions. From fundamental observations, we seek to improve practical applications. Of particular interest at the project inset were carbon nanotube separation, electric double layer capacitors, and water desalination. As time progresses, we became interested in sub-surface water transport and fate, and in hydraulic fracturing. We employed an arsenal of techniques based on atomistic molecular dynamics simulations. We validated our methods using experimental data, to propose practical improvements. Some experiments were conducted in house. We established valuable collaborations with experienced scientists at National Laboratories to provide information not attainable with our in-house resources.
Self-Forming Thin Interphases and Electrodes Enabling 3-D Structured High Energy Density Batteries
An electrolytically in-situ formed fluoride/lithium based battery has been developed to offer a pathway to scalable reconfigurable solid state batteries of high energy density. Research into the development of novel in-situ formed chemistries encompassing the negative and positive reactive current collectors, and the bi-ion glass conductor along with electrode structure was accomplished with a focused attention on transport. The solid state in-situ batteries were fabricated with a maskless scalable patterning technique to offer a pathway to high throughput, low material loss and fabrication of complex architectures. Such development and integration enabled to achieve the 12 V bipolar batteries at > 1000 Wh/L energy density based on electrode pairs and current collectors.
Insights into Spontaneous Solid Electrolyte Interphase Formation at Magnesium Metal Anode Surface from Ab Initio Molecular Dynamics Simulations
Spontaneous chemical reactivity at multivalent (Mg, Ca, Zn, Al) electrode surfaces is critical to solid electrolyte interphase (SEI) formation, and hence, directly affects the longevity of batteries. Here, we report an investigation of the reactivity of 0.5 M Mg(TFSI)2 in 1,2-dimethoxyethane (DME) solvent at a Mg(0001) surface using ab initio molecular dynamics (AIMD) simulations and detailed Bader charge analysis. Based on the simulations, the initial degradation reactions of the electrolyte strongly depend on the structure of the Mg(TFSI)2 species near the anode surface. At the surface, the dissociation of Mg(TFSI)2 species occurs via cleavage of the N-S bond for the solvent separated ion pair (SSIP) and via cleavage of the C-S bond for the contact ion pair (CIP) configuration. In the case of the CIP, both TFSI anions undergo spontaneous bond dissociation reactions to form atomic O, C, S, F, and N species adsorbed on the surface of the Mg anode. These products indicate that the initial SEI layer formed on the surface of the pristine Mg anode consists of a complex mixture of multiple components such as oxides, carbides, sulfides, fluorides, and nitrides. We believe that the atomic level insights gained from these simulations will lay the groundwork for the rational design of tailored and functional interphases that are critical for the success of multivalent battery technology.
Simulations of Li+ in Ionic Liquids: Structure, Transport, and Electrochemical Windows
Ionic liquids have been proposed as candidate electrolytes for a number of electrochemical applications. The Li+ solvation structure in these liquids is of central importance to electrolyte properties, like ionic conductivity and electrochemical stability. To this point, we employ simulations at three different size scales to better understand various aspects of the interplay between Li+ solvation structure and dynamics. The smallest systems are Li(Anion)n clusters that are treated with high-accuracy density functional theory (DFT) techniques to provide insight into solvation shell structure through energetics and comparisons to experimental IRRaman spectra. Mid-range sized liquid-phase systems (12-24 ion pairs) are treated with DFT molecular dynamics (MD) to provide temperature-dependent insight into Li+ solvation structure, diffusion, and electrochemical window. The largest systems (144-216 ion pairs) are treated with polarizable MD simulations to evaluate the influence of Li-networks on structure and provide size independent values of transport properties. We perform this procedure on three technologically important ionic liquids and comment on property correlations with solvation structure.
Complex Dynamics in Argyrodite Solid-State Ion Conductors
Argyrodites are a compositionally diverse family of materials that exhibit remarkable ion transport properties. While the average crystal structures of argyrodites have been extensively studied, ion transport in these materials is governed by a confluence of dynamic processes spanning the cation, anion, and polyanionic sublattices. This Perspective synthesizes recent advances in understanding the role of dynamics in structural behavior and ion transport properties. We examine the compositional and structural motifs that govern order−disorder transitions within the argyrodite family and further explore how ion hopping is facilitated by lattice dynamics, from long-range phonons to local rotational dynamics of polyanionic species. Through the lens of dynamics spanning multiple time and length scales, we establish guiding principles that govern transport phenomena and highlight avenues of future study for the argyrodite family of ion conductors.
Effect of Pore Connectivity on Li Dendrite Propagation within LLZO Electrolytes Observed with Synchrotron X-ray Tomography
Li 7 La 3 Zr 2 O 12 (LLZO) is a garnet type material that demonstrates promising characteristics for all solid-state battery applications due to its high Li-ion conductivity and its compatibility with Li metal. The primary limitation of LLZO is the propensity for short-circuiting at low current densities. Microstructure features such as grain boundaries, pore character, and density all contribute to this shorting phenomenon. Toward the goal of understanding structure-processing relationships for practical design of solid electrolytes, the present study tracks structural transformations in solid electrolytes processed at three different temperatures (1000, 1050 and 1150 °C) using synchrotron x-ray tomography. A sub volume of 300 μm 3 captures the heterogeneity of the solid electrolyte microstructure while minimizing the computational intensity associated with 3D reconstructions. While the porosity decreases with increasing temperature, the underlying connectivity of the pore region increases. In conclusion, solid electrolytes with interconnected pores short circuit at lower critical current densities than samples with less connected pores.
Relaxation Dynamics and Ion Conduction of Poly(Ethylene Carbonate/Ethylene Oxide) Copolymer-Based Electrolytes
Poly(ethylene carbonate/ethylene oxide) P(EC/EO) copolymer was synthesized from EC monomer as a new matrix component of solid polymer electrolytes (SPEs), and the correlation between polymer dynamics and ionic conductivity in the P(EC/EO)-based SPEs at various lithium salt weight fractions (w Li ) was investigated by dielectric spectroscopy, rheology, and molecular dynamics (MD) simulations. With the addition of lithium salt, the molecular motions at various scales (i.e., from local to segmental and global motion scales) were found to change as follows: (i) the local motion of P(EC/EO) was slightly accelerated, and at w Li ≥ 0.22, it was separated into two relaxation modes, one faster and the other slower than that of P(EC/EO), (ii) the segmental motion of P(EC/EO) became significantly slower with the addition of lithium salt, and (iii) the global terminal relaxation became slightly slower with the increase of w Li . Thus, the motion of P(EC/EO) at various scales in SPEs changed with different trends with increasing lithium salt. It was also found that the temperature dependence of the ionic conductivity was described by a Vogel–Fulcher–Tammann-type function, which was correlated with the segmental motion, as is known in other SPE systems. Furthermore, from MD simulations, lithium ions are coordinated with the EC units more likely and with a closer distance than EO units in P(EC/EO), and the coordination number of oxygens around one lithium ion was estimated as 6–7 at the distance of 0.30 nm. Here, these results suggest that the coordination structure of the oxygens around the lithium ion is slightly disrupted due to the presence of EC units compared to the chelating structure of pure PEO electrolytes.
Characterization of rhenium compounds obtained by electrochemical synthesis after aging process
The proper identification of the molecular nature of the aged rhenium compound obtained by means of electrodeposition from an alkaline aqueous electrolyte was determined. Chemical, structural and vibrational experimental characterization of the aged Re compound showed agreement with quantum-computations, thereby allowing the unambiguous identification of the Re compound as H(ReO{sub 4})H{sub 2}O. - Graphical abstract: Rhenium oxides were electrodeposited on a copper surface and after environmental aging was formed the H(ReO{sub 4})H{sub 2}O compound. The characterization of the synthesized material was made through the comparison of experimental evidence with quantum mechanical computations carried out by means of density functional theory (DFT). - Highlights: • Aged rhenium compound obtained by means of electrodeposition was studied. • The study was made by combining experimental and DFT-computational information. • The aged electrodeposited material is consistent with the H(ReO{sub 4})H{sub 2}O compound.
Structural, electrical and electrochemical properties of Li{sub 4}Zr{sub x}Si{sub 1-x}O{sub 4} (0.02 ≤ x ≤ 0.06) ceramic electrolytes
The aim of this work was to investigate the structural, electrical and electrochemical properties of Li{sub 4}Zr{sub x}Si{sub 1-x}O{sub 4} (0.02 ≤ x ≤ 0.06) compounds prepared via sol gel method. The X-ray Diffraction results showed that all compounds can be indexed to monoclinic structure in space group P2{sub 1/m}. The Li{sub 4}Zr{sub 0.06}Si{sub 0.94}O{sub 4} compound showed highest bulk, grain boundary and total conductivity values of 1.19 × 10{sup −4} S cm{sup −1}, 4.75 × 10{sup −5} S cm{sup −1} and 3.41 × 10{sup −5} S cm{sup −1} respectively. The insertion of Zr{sup 4+} is found to enhance conductivity of the parent sample Li{sub 4}SiO{sub 4}. Linear sweep voltammetry results showed that Li{sub 4}Zr{sub 0.06}Si{sub 0.94}O{sub 4} ceramic electrolytes was electrochemically stable up to 5.07 V versus a Li{sup +}/Li{sup +} reference electrode.
NASICON-type Na 3 Fe 2 (PO 4 ) 3 as a low-cost and high-rate anode material for aqueous sodium-ion batteries
Aqueous sodium-ion batteries are attractive battery alternatives for stationary energy storage due to their inherently low cost and high safety. The development of advanced electrode materials with excellent performance and low cost is crucial for the success of aqueous Na-ion batteries. Albeit the high capacity and stable cycling of the leading anode of NaTi 2 (PO 4 ) 3 , the high price of titanium element and the low Na-insertion potential close to the hydrogen evolution reaction may plague its application. Here we introduced a NASICON-type Na 3 Fe 2 (PO 4 ) 3 as a promising anode alternative for aqueous Na-ion batteries. Synchrotron X-ray diffraction and spectroscopy confirm its phase and atomic structure. Electrochemical characterization and X-ray photoelectron spectroscopy reveal the reversible Na+ insertion in Na 3 Fe 2 (PO 4 ) 3 due to the Fe 3+ /Fe 2+ redox couple, which renders a specific capacity of ~60 mAh g -1 and excellent cycling of 1000 cycles at 10C rate. A Super high rate of 100C was also achieved for this anode with a capacity retention of 61% after 1000 cycles. In addition, the Na 3 Fe 2 (PO 4 ) 3 anode is paired with a Prussian white analogue of Na 2 Mn[Fe(CN) 6 ] into a full cell, exhibiting promising cell performance and material sustainability. Furthermore, our work underlines the importance of fabricating aqueous batteries on the basis of the Earth-abundant, cost-effective, and non-toxic elements.
Ab Initio Study of Hydration and Proton Dissociation in Ionomer Membranes
We present a comparative study of proton dissociation in various functional acidic units that are promising candidates as building blocks for polymeric electrolyte membranes. Minimum energy structures for four acidic moieties with clusters of 1-6 water molecules were determined using density functional theory at the B3LYP/6-311G** level starting from chemically rational initial configurations. The perfluoro sulfonyl imide acid group (CF3CF2SO2NHSO2CF3) was observed to be the strongest acid, due to the substantial electron withdrawing effect of both fluorocarbon groups. The hydrophilic functional group (CH3OC6H3OCH3C6H4SO3H) of sulfonated polyetherether ketone (SPEEK) membrane was found to be the strongest base with the acidic proton dissociation requiring the addition of six water molecules and the hydrated proton being more tightly bound to the conjugate base. Even though both perfluoro sulfonyl imides and sulfonic acids (hydrophilic functional groups for sulfonyl imide and Nafion ionomers respectively) required only three water molecules to exhibit spontaneous proton dissociation, the largest possible solvent-separated hydronium ion was attained only for the sulfonyl imide moiety. These results provide a scientific basis for understanding the improved conductivity of perfluorinated sulfonyl imide-based membranes relative to that of the widely-used Nafion membrane.
Low temperature annealed amorphous indium gallium zinc oxide (a-IGZO) as a pH sensitive layer for applications in field effect based sensors
The use of a-IGZO instead of the conventional high-k dielectrics as a pH sensitive layer could lead to the simplification of fabrication steps of field effect based devices. In this work, the pH sensitivities of a-IGZO films directly deposited over a SiO{sub 2}/Si surface were studied utilizing electrolyte-insulator-semiconductor (EIS) structures. Annealing of the films was found to affect the sensitivity of the devices and the device with the film annealed at 400 {sup o}C in N{sub 2} ambience showed the better sensitivity, which reduced with further increase in the annealing temperature to 500 {sup o}C. The increased pH sensitivity with the film annealed at 400 {sup o}C in N{sub 2} gas was attributed to the enhanced lattice oxygen ions (based on the XPS data) and improved C-V characteristics, while the decrease in sensitivity at an increased annealing temperature of 500 {sup o}C was attributed to defects in the films as well as the induced traps at the IGZO/SiO{sub 2} interface based on the stretched accumulation and the peak in the inversion region of C-V curves. This study could help to develop a sensor where the material (a-IGZO here) used as the active layer in a thin film transistors (TFTs) possibly could also be used as the pH sensitive layer without affecting the TFT characteristics, and thus obviating the need of high-K dielectrics for sensitivity enhancement.