Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronics analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Analysis of Martian ionosphere and solar wind electron gas data from the planar retarding potential analyzer on the Viking spacecraft

Approximate expressions for the electron current collected by a planar retarding potential analyzer (RPA) mounted on a moving, conducting, charged spacecraft are derived. They are utilized for the analysis of electron current data obtained by the RPAs on the Viking spacecraft in the ionosphere of Mars and in the disturbed and undisturbed solar wind near this planet. It is shown that contamination currents by photoelectrons emitted from the spacecraft can be distinguished and removed from the signal. Parameters deduced from the analysis of RPA electron sampling data are the multicomponent electron temperatures, the number densities, and the spacecraft potential.

Mantas, G. P.↗
DOE OSTI2016

Electron probe microanalysis of irradiated and 1600 deg. C safety-tested AGR-1 Triso fuel particles with low and high retained {sup 110M}Ag - 18570

Advanced Gas Reactor (AGR)-1 fuel Compact 4-3-3 achieved 18.63% FIMA and was exposed to a safety test at 1600 deg. C. Two particles, AGR1-433-003 and AGR1-433-007, with measured-to-calculated {sup 110m}Ag inventories of <22% and 100%, respectively, were selected for electron microprobe analysis to determine whether the distribution or abundance of fission products differed proximally and distally from the deformed kernel in AGR1-433-003 and how this compared to fission product distribution in AGR1-433-007. On the deformed side of AGR1-433-003, xenon, cesium, iodine, europium, strontium, and tellurium concentrations in the kernel buffer interface near the protruded kernel were up to six times higher than on the opposite, non-deformed side. At the silicon carbide (SiC)-inner pyrolytic carbon (IPyC) interface proximal to the deformed kernel, palladium and silver concentrations were 1.2 and 0.04 wt% respectively. On the SiC-IPyC interface distal from the kernel deformation, those elements measured 0.4 and 0.01 wt%, respectively. Palladium and silver concentrations at the SiC-IPyC interface of AGR1-433-007 were 2.05 and 0.05 wt.%, respectively. Rare earth element concentrations at the SiC-IPyC interface of AGR1-433-007 were ten times higher than at the SiC-IPyC interfaces measured in AGR1-433-003. Palladium permeated the SiC layer of AGR1-433-007 and the SiC layer of the non-deformed side of AGR1-433-003. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

A green degumming approach for lignocellulosic kenaf bast using ethanolamine deep eutectic solvent

Traditional chemical degumming methods for lignocellulosic bast fibers pose substantial challenges, especially when dealing with kenaf bast, which has a high lignin content. Here, these challenges include severe pollution and low efficiency, etc. Therefore, this study developed a novel, green, and efficient degumming approach for lignocellulosic kenaf bast, leveraging choline chloride-ethanolamine (ChCl-ETA) alkaline deep eutectic solvent (DES). The efficacy of the ChCl-ETA DES based degumming method was validated through comprehensive chemical composition analysis, scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TG), and two-dimensional (2D) nuclear magnetic resonance (NMR) spectroscopy. Subsequently, the optimal degumming conditions, with a choline chloride to ethanolamine ratio of 1:6 and a degumming temperature of 120 °C, were determined based on the results of the residual gum content. Significantly, the recycled ChCl-ETA DES mixtures could maintain a degumming capacity (revealed by the residual gum content of degummed fibers) comparable to that of the conventional double-boiling method for at least five degumming cycles without purification. Given its low-pollution process and high efficiency, this developed method holds great potential for industrial-scale applications of lignocellulosic bast fibers.

Choline chloride↗
DOE OSTI2019

Fast, High-Resolution X-ray Microfluorescence Imaging

X-ray micro fluorescence imaging refers to the use of an x-ray beam as a probe to excite XRF in a specimen and produce a spatially resolved image of the element distribution. The advantages of high sensitivity and low background, together with the nondestructive nature of the measurement, have lead to applications of x-ray microfluorescence analysis in biology, geology, materials science, as well as in the area of nondestructive evaluation. Previous reports have described the development of an x-ray microprobe which uses a conventional source of x-rays to produce a 10-μm beam. This paper describes improvements to the microprobe which have increased the beam power and the solid angle of detection. The data collection and display software have also been enhanced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2003

New Method Developed To Purify Single Wall Carbon Nanotubes for Aerospace Applications

Single wall carbon nanotubes have attracted considerable attention because of their remarkable mechanical properties and electrical and thermal conductivities. Use of these materials as primary or secondary reinforcements in polymers or ceramics could lead to new materials with significantly enhanced mechanical strength and electrical and thermal conductivity. Use of carbon-nanotube-reinforced materials in aerospace components will enable substantial reductions in component weight and improvements in durability and safety. Potential applications for single wall carbon nanotubes include lightweight components for vehicle structures and propulsion systems, fuel cell components (bipolar plates and electrodes) and battery electrodes, and ultra-lightweight materials for use in solar sails. A major barrier to the successful use of carbon nanotubes in these components is the need for methods to economically produce pure carbon nanotubes in large enough quantities to not only evaluate their suitability for certain applications but also produce actual components. Most carbon nanotube synthesis methods, including the HiPCO (high pressure carbon monoxide) method developed by Smalley and others, employ metal catalysts that remain trapped in the final product. These catalyst impurities can affect nanotube properties and accelerate their decomposition. The development of techniques to remove most, if not all, of these impurities is essential to their successful use in practical applications. A new method has been developed at the NASA Glenn Research Center to purify gram-scale quantities of single wall carbon nanotubes. This method, a modification of a gas phase purification technique previously reported by Smalley and others, uses a combination of high-temperature oxidations and repeated extractions with nitric and hydrochloric acid. This improved procedure significantly reduces the amount of impurities (catalyst and nonnanotube forms of carbon) within the nanotubes, increasing their stability significantly. The onset of decomposition of the purified nanotubes (determined by thermal gravimetric analysis in air) is more than 300 C higher than that of the crude nanotubes. Transmission electron microscopy analysis of nanotubes purified by this method reveals near complete removal of iron catalyst particles. Analysis of the nanotubes using inductively coupled plasma spectroscopy revealed that the iron content of the nanotubes was reduced from 22.7 wt% in the crude nanotubes to less than 0.02 wt%. X-ray photoelectron spectroscopy revealed a decrease in iron content after purification as well as an increase in oxygen content due to the formation of carboxylic acid groups on the surface of the nanotubes. Nanotubes purified by this improved method can be readily dispersed in common organic solvents, in particular N,N-dimethylformamide, using prolonged ultrasonic treatment. These dispersions can then be used to incorporate single wall carbon nanotubes into polymer films.

Lebron, Marisabel↗
NASA NTRS2016

Nongyrotropic Electrons in Guide Field Reconnection

We apply a scalar measure of nongyrotropy to the electron pressure tensor in a 2D particle-in-cell simulation of guide field reconnection and assess the corresponding electron distributions and the forces that account for the nongyrotropy. The scalar measure reveals that the nongyrotropy lies in bands that straddle the electron diffusion region and the separatrices, in the same regions where there are parallel electric fields. Analysis of electron distributions and fields shows that the nongyrotropy along the inflow and outflow separatrices emerges as a result of multiple populations of electrons influenced differently by large and small-scale parallel electric fields and by gradients in the electric field. The relevant parallel electric fields include large-scale potential ramps emanating from the x-line and sub-ion inertial scale bipolar electron holes. Gradients in the perpendicular electric field modify electrons differently depending on their phase, thus producing nongyrotropy. Magnetic flux violation occurs along portions of the separatrices that coincide with the parallel electric fields. An inductive electric field in the electron EB drift frame thus develops, which has the effect of enhancing nongyrotropies already produced by other mechanisms and under certain conditions producing their own nongyrotropy. Particle tracing of electrons from nongyrotropic populations along the inflows and outflows shows that the striated structure of nongyrotropy corresponds to electrons arriving from different source regions. We also show that the relevant parallel electric fields receive important contributions not only from the nongyrotropic portion of the electron pressure tensor but from electron spatial and temporal inertial terms as well.

Parallel Electric Fields↗
NASA NTRS1977

Electron impact excitation of the electronic states of N2. III - Transitions in the 12.5-14.2-eV energy-loss region at incident energies of 40 and 60 eV

Analysis of electron energy-loss data at incident electron energies of 40 and 60 eV has led to the determination of normalized absolute differential cross sections for electron-impact excitation of five optically-allowed singlet states, two known triplet states, and two unknown triplet-like states of N2, lying in the energy-loss range 12.5-14.2 eV. The range of scattering angles was 5 to 138 deg. The optically allowed transitions and the known triplet excitations are identified. Cross sections for excitation to two unidentified triplet-like states at 13.155 and 13.395 eV were also obtained. The relationship of the generalized oscillator strength for the dipole-allowed states obtained from the described data to known optical oscillator strengths is discussed.

Chutjian, A.↗
NASA NTRS1979

A fundamental approach to adhesion: Synthesis, surface analysis, thermodynamics and mechanics

Adherend surfaces and fractography were studied using electron spectroscopy for chemical analysis and scanning electron microscopy/energy dispersive analysis of X-rays. In addition, Auger Electron Spectroscopy with depth profiling capability was used. It is shown that contamination of adhesion systems plays an important role not only in determining initial bond strengths but also in the durability of adhesive bonds. It is concluded that the analytical techniques used to characterize and monitor such contamination.

Chen, W.↗
DOE OSTI2025

Roadmap to an electron beam or X-ray center for industrial applications

Here, this paper introduces the topics that need consideration to allow an effective feasibility analysis of electron beams and/or X-rays technologies prior to potential investment and implementation of these technologies for industrial applications. It also highlights considerations for planning, developing and construction of an electron beam or X-ray facility The focus of this paper is on business topics and it provides details of where additional technical information can be found. The paper also describes current applications for electron beam and X-ray technologies to demonstrate their potential.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1990

Oxidation characteristics of Ti-25Al-10Nb-3V-1Mo intermetallic alloy

Static oxidation kinetics of the super-alpha 2 titanium-aluminide alloy Ti-25Al-10Nb-3V-1Mo (at. percent) were investigated in air over the temperature range of 650 to 1000 C using thermogravimetric analysis. The oxidation kinetics were complex at all exposure temperatures and displayed up to three distinct oxidation rates. Breakaway oxidation occurred after long exposure times at high temperatures. Oxidation products were determined using x ray diffraction techniques, electron microprobe analysis, and energy dispersive x ray analysis. Oxide scale morphology was examined by scanning electron microscopy of the surfaces and cross sections of oxidized specimens. The oxides during the parabolic stages were compact and multilayered, consisting primarily of TiO2 doped with Nb, a top layer of Al2O3, and a thin bottom layer of TiN. The transition between the second and third parabolic stage was found to be linked to the formation of a TiAl layer at the oxide-metal interface. Porosity was formed during the third stage, causing degradation of the oxide and the beginning of breakaway oxidation.

Wallace, Terryl A.↗
NASA NTRS2005

The Hollow Spheres of the Orgueil Meteorite: A Re-Examination

In 1971, Rossignol-Strick and Barghoorn provided images and a description of a number of spherical hollow microstructures showing well-defined walls in acid macerated extract of the Orgueil CI carbonaceous meteorite. Other forms such as membranes and spiral shaped structures were also reported. The carbon-rich (kerogen) hollow spheres were found to be in a narrowly constrained distribution of sizes (mainly 7 to 10 microns in diameter). Electron microprobe analysis revealed that these spheres contained Carbon, possibly P, N, and K. It was established that these forms could not be attributed to pollen or other recent terrestrial contaminants. It was concluded that they most probably represented organic coatings on globules of glass, olivine or magnetite in the meteorite. However, recent studies of the Orgueil meteorite have been carried out at the NASA/Marshall Space Flight Center with the S-4000 Hitachi Field Emission Scanning Electron Microscope (FESEM). These investigations have revealed the presence of numerous carbon encrusted spherical magnetite platelets and spherical and ovoidal bodies of elemental iron in-situ in freshly fractured interior surfaces of the meteorite. Their size range is also very narrowly constrained (typically approximately 6 to 12 microns) in diameter. High resolution images reveal that these bodies are also encrusted with a thin carbonaceous sheath and are surrounded by short nanofibrils that are shown to be composed of high purity iron by EDAX elemental analysis. We present Secondary and Backscatter Electron FESEM images and associated EDAX elemental analyses and 2D X-ray maps of these forms as we re-examine the hollow spheres of Orgueil and attempt to determine if they are representatives of the same population of indigenous microstructures.

Hoover, Richard B.↗
NASA NTRS1992

Oxidation characteristics of Ti-25Al-10Nb-3V-1Mo

Static oxidation kinetics of the super-alpha 2 titanium-aluminide alloy Ti-25Al-10Nb-3V-1Mo (at. percent) were investigated in air over the temperature range of 650 to 1000 C using thermogravimetric analysis. The oxidation kinetics were complex at all exposure temperatures and displayed up to three distinct oxidation rates. Breakaway oxidation occurred after long exposure times at high temperatures. Oxidation products were determined using X-ray diffraction techniques, electron microprobe analysis, and energy dispersive X-ray analysis. Oxide scale morphology was examined by scanning electron microscopy of the surfaces and cross sections of oxidized specimens. The oxides during the parabolic stages were compact and multilayered, consisting primarily of TiO2 doped with Nb, a top layer of Al2O3, and a thin bottom layer of TiN. The transition between the second and third parabolic stage was found to be linked to the formation of a TiAl layer at the oxide-metal interface. Porosity was formed during the third stage, causing degradation of the oxide and the beginning of breakaway oxidation.

Wallace, T. A.↗
NASA NTRS1990

VLF wave emissions by pulsed and dc electron beams in space. II - Analysis of Spacelab 2 results

Results are presented from experiments on the generation of radio frequency waves in space plasmas by the injection of artificial electron beams into ionospheric plasmas that were conducted on the Spacelab 2 Space Shuttle mission. The observations of narrow-band radiation (Reeves et al., 1988) are compared with the prediction of a theory of wave generation by pulsed electron beams (Harker and Banks, 1987). Good agreement is found between the observations and predictions for the s = 0, root 2 solutions representing Cerenkov radiation with wave normal angles less than the Gendrin angle. Also, for broadband emissions, predictions using a single-ion cold plasma theory are compared with the observed features. The broadband dc and pulsed electron beam emissions also have features that can be explained in terms of the characteristics of whistler mode waves produced by Cerenkov resonance.

Reeves, G. D.↗
DOE OSTI2019

Performance of Composite Insulators Used for Electric Transmission under Extreme Climatic Conditions

Composite or polymeric insulators are being used in various parts of the world for high-voltage transmission and distribution lines. In some parts of India, places in the states like Rajasthan and Gujarat experience an increase in the daytime temperature up to 50 °C, while the nighttime temperature reduces as low as 3-5 °C. Because of these extreme temperature variations along with electric stress and humidity conditions, composite insulators have to perform well over their lifetime to ensure the reliability of the transmission network. In the present work, experimental conditions are simulated with temperature variation from 50 to 3-5 °C along with electrical stress, humidity variation, pollution, and ultraviolet radiations. Accelerated aging studies with these stresses are conducted to understand the degradation on the insulator similar to the field conditions. Surface resistivity measurements, leakage current analysis, and surface degradation studies using thermogravimetric analysis, scanning electron microscopy, energy-dispersive x-ray, and Fourier transform infrared spectroscopy (FTIR) are conducted. Some interesting results obtained from the study are presented. Experimentation under extreme conditions with polluted insulators showed considerable degradation which was inferred from the material testing analysis. The insulator slabs on which electrical stress was not applied showed a considerable peak at 1500 cm{sup −1} in the FTIR spectra, indicating the generation of low molecular weight PDMS chains from the bulk due to UV aging and thermal stress, while the degradation pattern of non-polluted sample was severe compared to the slab treated but was considerably less severe in comparison with the polluted insulator sample exhibiting pollution can considerably increase degradation rate.

36 MATERIALS SCIENCE↗
NASA NTRS1974

Relativistic electron events in interplanetary space

Review of relativistic electron events observed in interplanetary space. The different types of event are identified and illustrated. The relationships between solar X-ray and radio emissions and relativistic electrons are examined, and the relevance of the observations to solar flare acceleration models is discussed. A statistical analysis of electron spectra, the electron/proton ratio and propagation from the flare site to the earth is presented. A model is outlined which can account for the release of electrons from the sun in a manner consistent with observations of energetic solar particles and electromagnetic solar radiation.

Simnett, G. M.↗