Search NASA⌕ Search

SEARCH · Search NASA

Results for “environmental changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Environmental trade-offs of direct air capture technologies in climate change mitigation toward 2100

Abstract Direct air capture (DAC) is critical for achieving stringent climate targets, yet the environmental implications of its large-scale deployment have not been evaluated in this context. Performing a prospective life cycle assessment for two promising technologies in a series of climate change mitigation scenarios, we find that electricity sector decarbonization and DAC technology improvements are both indispensable to avoid environmental problem-shifting. Decarbonizing the electricity sector improves the sequestration efficiency, but also increases the terrestrial ecotoxicity and metal depletion levels per tonne of CO 2 sequestered via DAC. These increases can be reduced by improvements in DAC material and energy use efficiencies. DAC exhibits regional environmental impact variations, highlighting the importance of smart siting related to energy system planning and integration. DAC deployment aids the achievement of long-term climate targets, its environmental and climate performance however depend on sectoral mitigation actions, and thus should not suggest a relaxation of sectoral decarbonization targets.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

3D printing of packaging inserts from biomass-fungi composites: Environmental sustainability analysis

In this study, a comprehensive Life cycle assessment (LCA) is conducted on molded packaging inserts from expanded polystyrene (EPS) foam, molded packaging inserts from biomass-fungi composite, and 3D-printed packaging inserts from biomass-fungi composite under the low mix / high volume (LMHV) scenario and molded and machined packaging inserts from EPS foam, molded and machined packaging inserts from biomass-fungi composite, and 3D-printed packaging inserts from biomass-fungi composite under the high mix / low volume (HMLV) scenario. Six environmental impact categories—climate change, acidification, eutrophication, fossil resource scarcity, land use, and water consumption—are analyzed to evaluate the environmental trade-offs associated with each type of packaging inserts. Under the LMHV scenario, molded packaging inserts from biomass-fungi composite emerge as the best option due to their lower impact on climate change, acidification and water consumption compared to other types of packaging inserts. Conversely, molded packaging inserts from biomass-fungi composite face challenges in land use and eutrophication, primarily due to raw material production. LCA also reveals that 3D-printed packaging inserts from biomass-fungi composite are the most environmentally favorable option under the HMLV scenario, due to significantly lower contributions to climate change, eutrophication, and water consumption compared to other types of packaging inserts. Conversely, 3D-printed packaging inserts from biomass-fungi composite face challenges in acidification and land use, primarily due to raw material production. As part of the LCA, sensitivity analyses show that sourcing energy from 100% renewable sources substantially lowers climate change impacts across all packaging types, while varying transportation distances results in only minor changes, indicating the dominant role of upstream material and manufacturing processes. Additional sensitivity analysis is conducted under the HMLV scenario to assess the impact of material removal during machining on the environment. The amount of material removal is varied from 10 to 70% for the sensitivity analysis and it highlights that the amount of material removed during machining has no significant impact on climate change for packaging inserts from EPS foam. However, molded and machined packaging inserts from biomass-fungi composite show an increasing trend in climate change with higher amount of material removal, while 3D-printed packaging inserts from biomass-fungi composite exhibit a decreasing trend, driven by reduced raw material usage and energy consumption.

09 BIOMASS FUELS↗
DOE OSTI2025

Effect of grafting density on the two-dimensional assembly of nanoparticles

Employing grazing-incidence small-angle X-ray scattering (GISAXS) and X-ray reflectivity (XRR), we demonstrate that films composed of polyethylene glycol (PEG)-grafted silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs), as well as their binary mixtures, form highly stable hexagonal structures at the vapor–liquid interface. These nanoparticles exhibit remarkable stability under varying environmental conditions, including changes in pH, mixing concentration, and PEG chain length. Short-chain PEG grafting produces dense, well-ordered films, while longer chains produce more complex, less dense quasi-bilayer structures. AuNPs exhibit higher grafting densities than AgNPs, leading to more ordered in-plane arrangements. In binary mixtures, AuNPs dominate the population at the surface, while AgNPs integrate into the system, expanding the lattice without forming a distinct binary superstructure. In conclusion, these results offer valuable insights into the structural behavior of PEG-grafted nanoparticles and provide a foundation for optimizing binary nanoparticle assemblies for advanced nanotechnology applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Comparative life cycle assessment of bioenergy in Japan from residual biomass-based wood pellets produced in the US Pacific Northwest

The US Pacific Northwest (PNW) faces an increase in wildfires due to forest overcrowding and climate change, posing significant environmental and public health risks. Traditional methods of managing surplus biomass, including prescribed burning, have increased air pollution and global warming. While in the PNW, residual woody biomass is being treated as waste, Japan’s growing demand for bio-based energy presents an opportunity to export value-added biomass as energy pellets. This study investigates whether producing wood pellets from the residual woody biomass from forest operations and sawmills for electricity generation in Japan is truly environmentally beneficial. Accordingly, we conducted a cradle-to-grave Life Cycle Assessment (LCA) to evaluate the environmental impact of residual pellets vs. coal for electricity generation. The assessment covered feedstock production, pellet processing, transportation, and combustion phases. Our findings indicate that replacing coal-based electricity in Japan with PNW residual pellet-based electricity can lower the Global Warming Potential (GWP) by about 90% for every unit of electricity displaced. Furthermore, the results show that repurposing the otherwise burnt harvest slash residues for pellet production would improve local air quality by reducing PM 2.5 and smog in the PNW. However, substituting coal with residual pellets marginally increased carcinogenic and ecotoxicity-related emissions. Based on these results, we conclude that substituting coal with residual wood pellets for electricity generation, particularly harvest-slash residual pellets, is environmentally beneficial across most impact categories, including the GWP. This research underscores how an export‑oriented pellet industry can help address the environmental challenges within the regional US wood products industry and global renewable energy supply.

Velappan, Hemalatha [Univ. of Washington, Seattle,↗
DOE OSTI2020

Symbiotic niche mapping reveals functional specialization by two ectomycorrhizal fungi that expands the host plant niche

Mutualisms are ubiquitous in natural systems, but less is known about how these positive interactions influence species distributions compared with antagonistic interactions, such as competition and predation. The niche concept is one useful approach for thinking about factors that shape species ranges, which we apply here towards understanding how the nature of plant-mycorrhizal symbioses change across large environmental gradients. We used a continuous niche mapping approach to examine how two ectomycorrhizal fungi (Thelephora terrestris, Suillus pungens) impact pine seedling growth across a two-dimensional soil nitrogen (N) and phosphorus (P) gradient. We found that ectomycorrhizal fungi improved plant growth most in nutrient addition treatments with highly imbalanced N:P ratios, demonstrating that mycorrhizal benefits depend on interactions between niche axes. Nevertheless, T. terrestris (highN:lowP) and S. pungens (lowN:highP) benefited plants most at opposite ends of the resource ratio spectrum, consistent with niche partitioning and functional specialization. While ectomycorrhizal fungi are often thought of as being most beneficial for nitrogen uptake, our results suggest that members of the Thelephoraceae may specialize in improving plant P uptake. Ectomycorrhizal colonization by a single fungus increased plant niche volume (calculated as convex hull volumes of plant growth response surfaces across N and P gradients) compared to non-mycorrhizal control plants and shows the overall positive effects of mutualisms on plant niche volume. Despite plant host benefits in S. pungens and T. terrestris single species treatments, the presence of both fungi together decreased plant niche volume. The lack of functional complementarity, despite functional specialization, indicates that in some environments, either fungal competition or the cost of maintaining a suboptimal mycorrhizal partner can limit the benefits of a higher quality partner. The niche mapping approach we present has the potential to answer fundamental questions about the dimensions of functional diversity in ectomycorrhizal fungi and the distributions of mycorrhizal symbioses.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

The Current Understanding of Mechanistic Pathways in Zeolite Crystallization

Zeolite catalysts and adsorbents have been an integral part of many commercial processes and are projected to play a significant role in emerging technologies to address the changing energy and environmental landscapes. The ability to rationally design zeolites with tailored properties relies on a fundamental understanding of crystallization pathways to strategically manipulate processes of nucleation and growth. The complexity of zeolite growth media engenders a diversity of crystallization mechanisms that can manifest at different synthesis stages. Here, in this review, we discuss the current understanding of classical and nonclassical pathways associated with the formation of (alumino)silicate zeolites. We begin with a brief overview of zeolite history and seminal advancements, followed by a comprehensive discussion of different classes of zeolite precursors with respect to their methods of assembly and physicochemical properties. The following two sections provide detailed discussions of nucleation and growth pathways wherein we emphasize general trends and highlight specific observations for select zeolite framework types. We then close with conclusions and future outlook to summarize key hypotheses, current knowledge gaps, and potential opportunities to guide zeolite synthesis toward a more exact science.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Climate-Driven Limits to Future Carbon Storage in California's Wildland Ecosystems

Enhanced ecosystem carbon storage is a key component of many climate mitigation pathways. The State of California has set an ambitious goal of carbon neutrality by 2045, relying in part on enhanced carbon sequestration in natural and working lands. We used statistical modeling, including random forest and climate analog approaches, to explore the climate-driven challenges and uncertainties associated with the goal of long-term carbon sequestration in forests and shrublands. We found that seasonal patterns of temperature and precipitation are strong controllers of the spatial distribution of aboveground live carbon. RCP8.5 projections of temperature and precipitation are estimated to drive decreases of 16.1% ± 7.5% in aboveground live carbon by the end of the century, with coastal areas of central and northern California and low/mid-elevation mountain areas being most vulnerable. With RCP4.5 projections, declines are less severe, with 8.8% ± 5.3% carbon loss. In either scenario, increases in temperature systematically cause biomass declines, and the spread of projected precipitation across 32 CMIP5 models contributes to substantial uncertainty in the magnitude of that decline. Projected changes in the environmental niche for the 20 most biomass-dominant tree species revealed widespread replacement of conifers by oak species in low elevation regions of central and northern California, with a corresponding decline in carbon storage depending on expected migration rates. The spatial patterns of vulnerability we identify may allow policymakers to assess where carbon sequestration in aboveground biomass is an appropriate part of a climate mitigation portfolio, and where future climate-driven carbon losses may be a liability.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Global Patterns and Controls of Nutrient Immobilization on Decomposing Cellulose in Riverine Ecosystems

Microbes play a critical role in plant litter decomposition and influence the fate of carbon in rivers and riparian zones. When decomposing low-nutrient plant litter, microbes acquire nitrogen (N) and phosphorus (P) from the environment (i.e., nutrient immobilization), and this process is potentially sensitive to nutrient loading and changing climate. Nonetheless, environmental controls on immobilization are poorly understood because rates are also influenced by plant litter chemistry, which is coupled to the same environmental factors. Here we used a standardized, low-nutrient organic matter substrate (cotton strips) to quantify nutrient immobilization at 100 paired stream and riparian sites representing 11 biomes worldwide. Immobilization rates varied by three orders of magnitude, were greater in rivers than riparian zones, and were strongly correlated to decomposition rates. In rivers, P immobilization rates were controlled by surface water phosphate concentrations, but N immobilization rates were not related to inorganic N. The N:P of immobilized nutrients was tightly constrained to a molar ratio of 10:1 despite wide variation in surface water N:P. Immobilization rates were temperature-dependent in riparian zones but not related to temperature in rivers. However, in rivers nutrient supply ultimately controlled whether microbes could achieve the maximum expected decomposition rate at a given temperature. Collectively, we demonstrated that exogenous nutrient supply and immobilization are critical control points for decomposition of organic matter.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

The Role of Wind‐Moisture Characteristics in Shaping Atmospheric River Flood Hazards

Atmospheric rivers (ARs) are key drivers of extreme precipitation in the Western U.S. Using regionally downscaled thermodynamic global warming (TGW) simulations, we examine how ARs with varying wind and moisture characteristics respond to warming. We classified 812 historical AR events into Gusty-Wet, Gusty-Dry, Calm-Wet, and Calm-Dry groups to evaluate differences in precipitation behavior. ARs with stronger winds and higher moisture content exhibit higher precipitation efficiency (PE) and greater integrated water vapor (IWV). Regionally, Calm ARs show higher IWV accumulation due to slower inland transport and reduced PE. Projections indicate increases in storm-total (sub-Clausius-Clapeyron (CC) scaling) and maximum 3-hourly precipitation (super-CC scaling) across all groups, with the most pronounced changes in Gusty-Wet and Calm-Wet ARs. Spatial differences in surface runoff, PE, and inland reach highlight the importance of AR subtype in shaping future flood hazards. These results offer insights into event-level and regional-scale precipitation changes under evolving environmental conditions.

Zhou, Yang [Lawrence Berkeley National Laboratory ↗
DOE OSTI2022

Origins of glycan selectivity in streptococcal Siglec-like adhesins suggest mechanisms of receptor adaptation

Bacterial binding to host receptors underlies both commensalism and pathogenesis. Many streptococci adhere to protein-attached carbohydrates expressed on cell surfaces using Siglec-like binding regions (SLBRs). The precise glycan repertoire recognized may dictate whether the organism is a strict commensal versus a pathogen. However, it is currently not clear what drives receptor selectivity. Here, we use five representative SLBRs and identify regions of the receptor binding site that are hypervariable in sequence and structure. We show that these regions control the identity of the preferred carbohydrate ligand using chimeragenesis and single amino acid substitutions. We further evaluate how the identity of the preferred ligand affects the interaction with glycoprotein receptors in human saliva and plasma samples. As point mutations can change the preferred human receptor, these studies suggest how streptococci may adapt to changes in the environmental glycan repertoire.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Bio-Based Polymers with Performance-Advantaged Properties

Bio-based compounds with unique chemical functionality can be obtained through selective transformations of plant and other non-fossil, biogenic feedstocks for the development of new polymers to displace those produced from fossil carbon feedstocks. Although substantial efforts have been invested to produce bio-based polymers that are chemically identical to and directly replace those from petroleum, a long-pursued goal is to synthesize new, sustainable, bio-based polymers that either functionally replace or exhibit performance advantages relative to incumbent polymers. Owing to anthropogenic climate change and the environmental consequences of global plastics pollution, the need to realize a bio-based materials economy at scale is critical. To that end, in this Review we describe the concept of performance-advantaged, bio-based polymers (PBPs), highlighting examples wherein superior performance is facilitated by the inherent chemical functionality of bio-based feedstocks. We focus on PBPs with C–O and C–N inter-unit chemical bonds, as these are often readily accessible from bio-based feedstocks, which are heteroatom-rich relative to petroleum-derived feedstocks. Finally, we outline guiding principles and challenges to aid progress in the development of PBPs.

bio-based feedstock↗
DOE OSTI2021

Genomic mechanisms of climate adaptation in polyploid bioenergy switchgrass

Long-term climate change and periodic environmental extremes threaten food and fuel security and global crop productivity. Although molecular and adaptive breeding strategies can buffer the effects of climatic stress and improve crop resilience, these approaches require sufficient knowledge of the genes that underlie productivity and adaptation—knowledge that has been limited to a small number of well-studied model systems. Here we present the assembly and annotation of the large and complex genome of the polyploid bioenergy crop switchgrass ( Panicum virgatum ). Analysis of biomass and survival among 732 resequenced genotypes, which were grown across 10 common gardens that span 1,800 km of latitude, jointly revealed extensive genomic evidence of climate adaptation. Climate–gene–biomass associations were abundant but varied considerably among deeply diverged gene pools. Furthermore, we found that gene flow accelerated climate adaptation during the postglacial colonization of northern habitats through introgression of alleles from a pre-adapted northern gene pool. The polyploid nature of switchgrass also enhanced adaptive potential through the fractionation of gene function, as there was an increased level of heritable genetic diversity on the nondominant subgenome. In addition to investigating patterns of climate adaptation, the genome resources and gene–trait associations developed here provide breeders with the necessary tools to increase switchgrass yield for the sustainable production of bioenergy.

09 BIOMASS FUELS↗
DOE OSTI2024

The Effect of Natural Disasters and Extreme Weather on Household Location Choice and Economic Welfare

Natural disasters have increased in the United States in recent decades. At the same time, there has been a shift in population away from the states in the Northeast and Midwest to areas in the Sun Belt, many of which face increased risks from natural disasters. Spatial equilibrium theory predicts that households trade off risk for income in making location decisions. This study estimates a spatial equilibrium model of household location choice to understand these trade-offs. The results show that households require as much as 0.40% of annual household income to endure an additional disaster over the course of a decade. They also show that these values differ substantially depending on household skill level with higher-skill, higher-income households willing to pay three times more in annual income to avoid an additional natural disaster. Furthermore, these results have important implications for policymakers thinking about climate change adaptation and environmental justice.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Physics-informed neural networks for identification of material properties using standing waves

A metallic structure in its initial stage of failure involves plastic deformation or environmental degradation that changes the elastic modulus and density. This work presents the detection of change in wave velocity (a function of elastic modulus and density) as a system identification problem. A physics-informed neural network (PINN) is proposed to solve the system identification problem. The PINN takes the spatial coordinates of scanning locations and time as inputs and provides the displacement and wave velocity as outputs. The governing partial differential equation of standing waves in a rod is incorporated into the neural network as physics in the form of a loss function. The wave velocity vector is randomly initiated. During the training of the network, physics is used to determine and update the wave velocity target vector from the network’s displacement predictions. The measured data, comprising sparse displacement response on the rod structure, are used to train the PINN. The wave velocity at the sparse locations on the rod is learned from the predicted displacements during the training. Using the predictions of the trained network, the response of free vibration or material property variation can be reconstructed at unscanned locations on the structure to obtain high-resolution maps for full-field imaging to detect and localize the changes caused by plastic deformation. The PINN’s sparse scanning and simultaneous prediction capability during training can lead to high scanning and data-processing speeds. This capability yields a nondestructive evaluation system that can predict the presence of degraded material locations as the structural vibrations are scanned and processed in real time.

Rathod, Vivek↗
DOE OSTI2021

Machine Learning of Bacterial Transcriptomes Reveals Responses Underlying Differential Antibiotic Susceptibility

In vitro antibiotic susceptibility testing often fails to accurately predict in vivo drug efficacies, in part due to differences in the molecular composition between standardized bacteriologic media and physiological environments within the body. Here, we investigate the interrelationship between antibiotic susceptibility and medium composition in Escherichia coli K-12 MG1655 as contextualized through machine learning of transcriptomics data. Application of independent component analysis, a signal separation algorithm, shows that complex phenotypic changes induced by environmental conditions or antibiotic treatment are directly traced to the action of a few key transcriptional regulators, including RpoS, Fur, and Fnr. Integrating machine learning results with biochemical knowledge of transcription factor activation reveals medium-dependent shifts in respiration and iron availability that drive differential antibiotic susceptibility. By extension, the data generation and data analytics workflow used here can interrogate the regulatory state of a pathogen under any measured condition and can be applied to any strain or organism for which sufficient transcriptomics data are available.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Visualizing Microbial Community Dynamics via a Controllable Soil Environment

Visualizing microbial community dynamics within soil environments remains challenging. Here, we developed a custom-built SoilBox system that facilitates probing various changes occurring in microbial community development and molecular processes when exposed to environmental perturbations (e.g., temperature changes, drought, nutrient availability). Using confocal microscopy along with mass spectrometry imaging, we demonstrate the power of this system by correlating microbial growth and spatial metabolic information from soil communities under different moisture regimes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

The Global Technical, Economic, and Feasible Potential of Renewable Electricity

Renewable electricity generation will need to be rapidly scaled to address climate change and other environmental challenges. Doing so effectively will require an understanding of resource availability. We review estimates for renewable electricity of the global technical potential, defined as the amount of electricity that could be produced with current technologies when accounting for geographical and technical limitations as well as conversion efficiencies; economic potential, which also includes cost; and feasible potential, which accounts for societal and environmental constraints. We consider utility-scale and rooftop solar photovoltaics, concentrated solar power, onshore and offshore wind, hydropower, geothermal electricity, and ocean (wave, tidal, ocean thermal energy conversion, and salinity gradient energy) technologies. We find that the reported technical potential for each energy resource ranges over several orders of magnitude across and often within technologies. Therefore, we also discuss the main factors explaining why authors find such different results. According to this review and on the basis of the most robust studies, we find that technical potentials for utility-scale solar photovoltaic, concentrated solar power, onshore wind, and offshore wind are above 100 PWh/year. Hydropower, geothermal electricity, and ocean thermal energy conversion have technical potentials above 10 PWh/year. Rooftop solar photovoltaic, wave, and tidal have technical potentials above 1 PWh/year. Salinity gradient has a technical potential above 0.1 PWh/year. The literature assessing the global economic potential of renewables, which considers the cost of each renewable resource, shows that the economic potential is higher than current and near-future electricity demand. Fewer studies have calculated the global feasible potential, which considers societal and environmental constraints. While these ranges are useful for assessing the magnitude of available energy sources, they may omit challenges for large-scale renewable portfolios.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗