SEARCH · Search NASA

Results for “factorization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Entrance and exit region friction factor models for annular seal analysis

The Mach number definition and boundary conditions in Nelson's nominally-centered, annular gas seal analysis are revised. A method is described for determining the wall shear stress characteristics of an annular gas seal experimentally. Two friction factor models are developed for annular seal analysis; one model is based on flat-plate flow theory; the other uses empirical entrance and exit region friction factors. The friction factor predictions of the models are compared to experimental results. Each friction model is used in an annular gas seal analysis. The seal characteristics predicted by the two seal analyses are compared to experimental results and to the predictions of Nelson's analysis. The comparisons are for smooth-rotor seals with smooth and honeycomb stators. The comparisons show that the analysis which uses empirical entrance and exit region shear stress models predicts the static and stability characteristics of annular gas seals better than the other analyses. The analyses predict direct stiffness poorly.

Elrod, David Alan↗

NASA NTRS1988

Recursive mass matrix factorization and inversion: An operator approach to open- and closed-chain multibody dynamics

This report advances a linear operator approach for analyzing the dynamics of systems of joint-connected rigid bodies.It is established that the mass matrix M for such a system can be factored as M=(I+H phi L)D(I+H phi L) sup T. This yields an immediate inversion M sup -1=(I-H psi L) sup T D sup -1 (I-H psi L), where H and phi are given by known link geometric parameters, and L, psi and D are obtained recursively by a spatial discrete-step Kalman filter and by the corresponding Riccati equation associated with this filter. The factors (I+H phi L) and (I-H psi L) are lower triangular matrices which are inverses of each other, and D is a diagonal matrix. This factorization and inversion of the mass matrix leads to recursive algortihms for forward dynamics based on spatially recursive filtering and smoothing. The primary motivation for advancing the operator approach is to provide a better means to formulate, analyze and understand spatial recursions in multibody dynamics. This is achieved because the linear operator notation allows manipulation of the equations of motion using a very high-level analytical framework (a spatial operator algebra) that is easy to understand and use. Detailed lower-level recursive algorithms can readily be obtained for inspection from the expressions involving spatial operators. The report consists of two main sections. In Part 1, the problem of serial chain manipulators is analyzed and solved. Extensions to a closed-chain system formed by multiple manipulators moving a common task object are contained in Part 2. To retain ease of exposition in the report, only these two types of multibody systems are considered. However, the same methods can be easily applied to arbitrary multibody systems formed by a collection of joint-connected regid bodies.

Rodriguez, G.↗

NASA NTRS1987

Free-field correction factor for spherical acoustic waves impinging on cylinders

The scattering and diffraction of spherical waves by an infinite rigid cylinder is analytically studied for monopole and dipole acoustic sources. A correction factor at the cylinder surface for the change in the free-field radiation levels due to the presence of the cylinder is calculated. The results indicate that the correction factor is sensitive to source frequency and location. Regions of negative correction factor, due to shadowing and creeping wave behavior are identified.

Fuller, C. R.↗

NASA NTRS1987

A simple parameterization for quality factor as a function of linear energy transfer

The paper presents a simple analytic approximation of the radiation quality factor (Q) as a function of linear energy transfer for use in radiation protection calculations. The paper also presents estimated quality factors in water for protons over a broad range of incident energies. It is shown that the quality factors are less than unity for all proton energies greater than 13 MeV.

Townsend, Lawrence W.↗

NASA NTRS1989

Factorization Of Positive Definite, Banded Hermitian Matrices

Report discusses application of Cholesky factorization algorithm to positive definite, banded Hermitian matrices. Begins by extending Cholesky factorization algorithm to cover uniformly-partitioned, banded, positive definite matrices of rank n that is real symmetric or Hermitian. Then two stratagems given for use of algorithm in concurrent-processing system in which N less than it has to be to enable factorization of matrix in as few serial steps as possible and where uniformly high efficiency expected from all processing elements. One of major purposes of this and related studies to maximize speedup and efficiency in system of concurrent-data-processing elements.

Salama, Moktar A.↗

NASA NTRS1988

Pilot factors guidelines for the operational inspection of navigation systems

A computerized human engineered inspection technique is developed for use by FAA inspectors in evaluating the pilot factors aspects of aircraft navigation systems. The short title for this project is Nav Handbook. A menu-driven checklist, computer program and data base (Human Factors Design Criteria) were developed and merged to form a self-contained, portable, human factors inspection checklist tool for use in a laboratory or field setting. The automated checklist is tailored for general aviation navigation systems and can be expanded for use with other aircraft systems, transports or military aircraft. The Nav Handbook inspection concept was demonstrated using a lap-top computer and an Omega/VLF CDU. The program generates standardized inspection reports. Automated checklists for LORAN/C and R NAV were also developed. A Nav Handbook User's Guide is included.

Sadler, J. F.↗

NASA NTRS1988

Effect of adhesive debond on stress-intensity factors in bonded composite panels

Stress-intensity factors are calculated for a cracked infinite sheet adhesively bonded to a stringer, and debonding of the adhesive layer is predicted. The stringer is modeled as a semiinfinite sheet. Adhesive nonlinearity is also included. Both the sheet and stringer are treated as homogeneous, orthotropic materials, a set of integral equations is formulated and solved to obtain the adhesive shear stresses and crack-tip stress-intensity factors. Adhesive debonding is predicted using a rupture criterion based on the combined adhesive stresses. A through-the-thickness crack is located in the infinite sheet perpendicular to the edge of the stringer. When the crack is not under the stringer, the debond extends along the edge of the stringer. When the crack tip is beneath the stringer, the debond extends to the crack tip, then along the edge of the stringer. Stress levels required for debond initiation decrease as the crack tip is moved beneath the stringer. With a nonlinear adhesive, the debond initiates at higher applied stress levels than in linear adhesive cases. Compared with the linear adhesive solution, modeling a nonlinear adhesive causes the stress-intensity factor to decrease when debonding is included.

Bigelow, C. A.↗

NASA NTRS1989

A family of permutations for concurrent factorization of block tridiagonal matrices

The inherent strong seriality of closely coupled systems is circumvented by defining a family of permutations for reordering equation sets whose matrix of coefficients is Hermitian block tridiagonal. The authors show how these permutations can be used to achieve relatively high concurrency in the Cholesky factorization of banded systems at the expense of introducing limited extra computations due to fill-in terms in the factors. Directed graphs are developed for the concurrent factorization of the transformed matrix of coefficients by the Cholesky algorithm. Expressions for speedup and efficiency are derived in terms of parameters of the permutation, set of equations, and machine architecture.

Utku, Senol↗

NASA NTRS1988

Radiative transfer in rectangular enclosures - A discretized exchange factor solution

The discretized exchange factor method is used to analyze radiative exchange in a rectangular enclosure. The results compare excellently with those of other methods, especially the zonal method. Since the direct exchange factors are between nodal points no integration is necessary for evaluation of these factors. It is found that the present approach provides accurate results even when a small number of nodes is used.

Naraghi, M. H. N.↗

NASA NTRS1990

Insulin and insulin-like growth factor-1 induce pronounced hypertrophy of skeletal myofibers in tissue culture

Skeletal myofibers differentiated from primary avian myoblasts in tissue culture can be maintained in positive nitrogen balance in a serum-free medium for at least 6 to 7 days when embedded in a three dimensional collagen gel matrix. The myofibers are metabolically sensitive to physiological concentrations of insulin but these concentrations do not stimulate cell growth. Higher insulin concentrations stimulate both cell hyperplasia and myofiber hypertrophy. Cell growth results from a long term 42 percent increase in total protein synthesis and a 38 percent increase in protein degradation. Myofiber diameters increase by 71 to 98 percent after 6 to 7 days in insulin-containing medium. Insulin-like growth factor-1 but not insulin-like growth factor-2, at 250 ng/ml, is as effective as insulin in stimulating cell hyperplasia and myofiber hypertrophy. This model system provides a new method for studying the long-term anabolic effects of insulin and insulin-like growth factors on myofiber hypertrophy under defined tissue culture conditions.

Vandenburgh, Herman H.↗

NASA NTRS1990

Evaluation of finite-element models and stress-intensity factors for surface cracks emanating from stress concentrations

A re-evaluation of the 3-D finite-element models and methods used to analyze surface crack at stress concentrations is presented. Previous finite-element models used by Raju and Newman for surface and corner cracks at holes were shown to have ill-shaped elements at the intersection of the hole and crack boundaries. Improved models, without these ill-shaped elements, were developed for a surface crack at a circular hole and at a semi-circular edge notch. Stress-intensity factors were calculated by both the nodal-force and virtual-crack-closure methods. Comparisons made between the previously developed stress-intensity factor equations and the results from the improved models agreed well except for configurations with large notch-radii-to-plate-thickness ratios. Stress-intensity factors for a semi-elliptical surface crack located at the center of a semi-circular edge notch in a plate subjected to remote tensile loadings were calculated using the improved models.

Tan, P. W.↗

NASA NTRS1990

Automatic Speech Recognition in Air Traffic Control: a Human Factors Perspective

The introduction of Automatic Speech Recognition (ASR) technology into the Air Traffic Control (ATC) system has the potential to improve overall safety and efficiency. However, because ASR technology is inherently a part of the man-machine interface between the user and the system, the human factors issues involved must be addressed. Here, some of the human factors problems are identified and related methods of investigation are presented. Research at M.I.T.'s Flight Transportation Laboratory is being conducted from a human factors perspective, focusing on intelligent parser design, presentation of feedback, error correction strategy design, and optimal choice of input modalities.

Karlsson, Joakim↗

NASA NTRS1991

Calculations of steady and transient channel flows with a time-accurate L-U factorization scheme

Calculations of steady and unsteady, transonic, turbulent channel flows with a time accurate, lower-upper (L-U) factorization scheme are presented. The L-U factorization scheme is formally second-order accurate in time and space, and it is an extension of the steady state flow solver (RPLUS) used extensively to solve compressible flows. A time discretization method and the implementation of a consistent boundary condition specific to the L-U factorization scheme are also presented. The turbulence is described by the Baldwin-Lomax algebraic turbulence model. The present L-U scheme yields stable numerical results with the use of much smaller artificial dissipations than those used in the previous steady flow solver for steady and unsteady channel flows. The capability to solve time dependent flows is shown by solving very weakly excited and strongly excited, forced oscillatory, channel flows.

Kim, S.-W.↗

NASA NTRS1991

Scale-model charge-transfer technique for measuring enhancement factors

Determination of aircraft electric field enhancement factors is crucial when using airborne field mill (ABFM) systems to accurately measure electric fields aloft. SRI used the scale model charge transfer technique to determine enhancement factors of several canonical shapes and a scale model Learjet 36A. The measured values for the canonical shapes agreed with known analytic solutions within about 6 percent. The laboratory determined enhancement factors for the aircraft were compared with those derived from in-flight data gathered by a Learjet 36A outfitted with eight field mills. The values agreed to within experimental error (approx. 15 percent).

Kositsky, J.↗

NASA NTRS1991

Shortwave shape factor inversion of earth radiation budget observations

Results are presented on an investigation of the effects of various assumptions (including assumptions of a constant flux field, a constant albedo field, and a variable albedo field) used for deriving the shortwave shape factor on the estimates, from radiometric measurements, of the albedo at the top of the atmosphere. The accuracies and the resolutions of the shape-factor-flux estimates obtained using these assumptions are determined by simulating the shape factor inversion technique with scanner data from the Earth Radiation Budget Experiment (ERBE). The resulting biases and variances are given for both the ERBE medium-field-of-view and wide-field-of-view radiometers.

Green, Richard N.↗

NASA NTRS1991

Approximate factorization with source terms

A comparative evaluation is made of three methodologies with a view to that which offers the best approximate factorization error. While two of these methods are found to lead to more efficient algorithms in cases where factors which do not contain source terms can be diagonalized, the third method used generates the lowest approximate factorization error. This method may be preferred when the norms of source terms are large, and transient solutions are of interest.

Shih, T. I.-P.↗

NASA NTRS1991

Human factors issues in the design of user interfaces for planning and scheduling

The purpose is to provide and overview of human factors issues that impact the effectiveness of user interfaces to automated scheduling tools. The following methods are employed: (1) a survey of planning and scheduling tools; (2) the identification and analysis of human factors issues; (3) the development of design guidelines based on human factors literature; and (4) the generation of display concepts to illustrate guidelines.

Murphy, Elizabeth D.↗

NASA NTRS1991

Operational design factors for NASP derived vehicles

The factors that significantly affect the operability of aerospace planes are identified and considered in terms of the development of the National Aerospace Plane (NASP). The aircraftlike vehicle can be affected by variables related to the structure, propulsion, and mechanical elements of the design. The requirements to control the factors are listed including robustness, fuels and propellants, maintainability, autonomy, and development testing. The details of the requirements indicate critical factors such as the strength-to-weight ratios of the materials, propellant-system components that can withstand 5000 consecutive cycles, and low vehicle-failure probabilities. The NASP program is concluded to require: (1) models for quantitative operational assessments; (2) a modular design for the NASP structure; (3) computer-technology integration; and (4) technologies to support and normalize cryogenic operations.

Hickman, R. A.↗