Search NASA⌕ Search

SEARCH · Search NASA

Results for “flight computer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Adaptive momentum management for large space structures

Momentum management is discussed for a Large Space Structure (LSS) with the structure selected configuration being the Initial Orbital Configuration (IOC) of the dual keel space station. The external forces considered were gravity gradient and aerodynamic torques. The goal of the momentum management scheme developed is to remove the bias components of the external torques and center the cyclic components of the stored angular momentum. The scheme investigated is adaptive to uncertainties of the inertia tensor and requires only approximate knowledge of principle moments of inertia. Computational requirements are minimal and should present no implementation problem in a flight type computer and the method proposed is shown to be effective in the presence of attitude control bandwidths as low as .01 radian/sec.

Hahn, E.↗
NASA NTRSDate not supplied

In-flight System Identification of the Ingenuity Mars Helicopter

The 68th and 69th flights of NASA’s Ingenuity Mars Helicopter marked the first dedicated system identification flights of an aerial vehicle on another planet. Chirp signals were injected into the swashplate cyclic controls for both legs of the two out-and-back flights. Frequency responses were computed from the flight data, using both the Direct Method (DM) and the Joint-Input-Output (JIO) approach, for the identification of stability and control derivatives in forward flight conditions. The resulting identified state-space models were compared against existing flight dynamics simulation models, showing excellent correlation in the higher frequency range. External disturbances were seen to introduce a bias in the identified lower frequency responses, which was partially mitigated using the JIO method. These findings will inform future modeling and flight testing efforts of Mars rotorcraft.

Ingenuity↗
NASA NTRS1990

Computation of rotor aerodynamic loads in forward flight using a full-span free wake analysis

The development of an advanced computational analysis of unsteady aerodynamic loads on isolated helicopter rotors in forward flight is described. The primary technical focus of the development was the implementation of a freely distorting filamentary wake model composed of curved vortex elements laid out along contours of constant vortex sheet strength in the wake. This model captures the wake generated by the full span of each rotor blade and makes possible a unified treatment of the shed and trailed vorticity in the wake. This wake model was coupled to a modal analysis of the rotor blade dynamics and a vortex lattice treatment of the aerodynamic loads to produce a comprehensive model for rotor performance and air loads in forward flight dubbed RotorCRAFT (Computation of Rotor Aerodynamics in Forward Flight). The technical background on the major components of this analysis are discussed and the correlation of predictions of performance, trim, and unsteady air loads with experimental data from several representative rotor configurations is examined. The primary conclusions of this study are that the RotorCRAFT analysis correlates well with measured loads on a variety of configurations and that application of the full span free wake model is required to capture several important features of the vibratory loading on rotor blades in forward flight.

Quackenbush, Todd R.↗
NASA NTRS1993

Application of CFD to a generic hypersonic flight research study

Computational analyses have been performed for the initial assessment of flight research vehicle concepts that satisfy requirements for potential hypersonic experiments. Results were obtained from independent analyses at NASA Ames, NASA Langley, and Sandia National Labs, using sophisticated time-dependent Navier-Stokes and parabolized Navier-Stokes methods. Careful study of a common problem consisting of hypersonic flow past a slightly blunted conical forebody was undertaken to estimate the level of uncertainty in the computed results, and to assess the capabilities of current computational methods for predicting boundary-layer transition onset. Results of this study in terms of surface pressure and heat transfer comparisons, as well as comparisons of boundary-layer edge quantities and flow-field profiles are presented here. Sensitivities to grid and gas model are discussed. Finally, representative results are presented relating to the use of Computational Fluid Dynamics in the vehicle design and the integration/support of potential experiments.

Green, Michael J.↗
NASA NTRSDate not supplied

NASA and Blue Origin’s Flight Assessment of Precision Landing Algorithms Computing Performance

NASA’s Safe and Precise Landing - Integrated Capabilities Evolution (SPLICE) project continues NASA’s work in the development and testing of technologies for Precision Landing and Hazard Avoidance (PL&HA). This paper presents results characterizing how SPLICE flight software utilizes the shared computing resources of the Descent Landing Computer (DLC), one of the PL&HA technologies under development. The SPLICE technologies are being tested as an integrated payload on Blue Origin’s New Shephard suborbital vehicle. The results presented in this paper are measured by applications running in and with the flight software both in flight, and in a high-fidelity Hardware-in-the-Loop (HWIL) simulation environment. Linux utilities to measure performance are also executed from the command line in the HWIL configuration. Performance measurements of the SPLICE workloads executing on the DLC provide insight on how efficiently the software is utilizing the DLC resources. Examples of how these measurements have guided improvements in the flight code are presented. In addition, the DLC uses a commercial processor as a surrogate for NASA’s High Performance Spaceflight Computing (HPSC) processor. This work provides insight on how an HPSC system may perform delivering PL&HA capabilities on a future mission. The measurements also can be used to infer architectural requirements for PL&HA capabilities, informing the HPSC project and other flight computer development efforts. Examples of the measurements collected include processor utilization, I/O bandwidth, cache and branch misses, and application profiles.

Precision Landing and Hazard Avoidance↗
NASA NTRSDate not supplied

NASA and Blue Origin’s Flight Assessment of Precision Landing Algorithms Computing Performance

NASA’s Safe and Precise Landing - Integrated Capabilities Evolution (SPLICE) project continues NASA’s work in the development and testing of technologies for Precision Landing and Hazard Avoidance (PL&HA). This paper presents results characterizing how SPLICE flight software utilizes the shared computing resources of the Descent Landing Computer (DLC), one of the PL&HA technologies under development. The SPLICE technologies are being tested as an integrated payload on Blue Origin’s New Shepard suborbital vehicle. The results presented in this paper are measured by applications running in and with the flight software both in flight, and in a high-fidelity Hardware-in-the-Loop (HWIL) simulation environment. Linux utilities to measure performance are also executed from the command line in the HWIL configuration. Performance measurements of the SPLICE workloads executing on the DLC provide insight on how efficiently the software is utilizing the DLC resources. Examples of how these measurements have guided improvements in the flight code are presented. In addition, the DLC uses a commercial processor as a surrogate for NASA’s High-Performance Spaceflight Computing (HPSC) processor. This work provides insight on how an HPSC system may perform delivering PL&HA capabilities on a future mission. The measurements also can be used to infer architectural requirements for PL&HA capabilities, informing the HPSC project and other flight computer development efforts. Examples of the measurements collected include processor utilization, I/O bandwidth, cache and branch misses, and application profiles.

Precision Landing↗
NASA NTRS1980

Laboratory evaluation of the pointing stability of the ASPS Vernier System

The annular suspension and pointing system (ASPS) is an end-mount experiment pointing system designed for use in the space shuttle. The results of the ASPS Vernier System (AVS) pointing stability tests conducted in a laboratory environment are documented. A simulated zero-G suspension was used to support the test payload in the laboratory. The AVS and the suspension were modelled and incorporated into a simulation of the laboratory test. Error sources were identified and pointing stability sensitivities were determined via simulation. Statistical predictions of laboratory test performance were derived and compared to actual laboratory test results. The predicted mean pointing stability during simulated shuttle disturbances was 1.22 arc seconds; the actual mean laboratory test pointing stability was 1.36 arc seconds. The successful prediction of laboratory test results provides increased confidence in the analytical understanding of the AVS magnetic bearing technology and allows confident prediction of in-flight performance. Computer simulations of ASPS, operating in the shuttle disturbance environment, predict in-flight pointing stability errors less than 0.01 arc seconds.

Source record↗
NASA NTRS1987

Adaptive momentum management for the dual keel Space Station

The report discusses momentum management for a large space structure with the structure selected configuration being the Initial Orbital Configuration of the dual-keel Space Station. The external torques considered were gravity gradient and aerodynamic torques. The goal of the momentum management scheme developed is to remove the bias components of the external torques and center the cyclic components of the stored angular momentum. The scheme investigated is adaptive to uncertainties of the inertia tensor and requires only approximate knowledge of principal moments of inertia. Computational requirements are minimal and should present no implementation problem in a flight-type computer. The method proposed is shown to be effective in the presence of attitude control bandwidths as low as 0.01 radian/sec.

Hopkins, M.↗
NASA NTRS1994

Hypersonic Research Program at NASA Ames Research Center

This paper will describe the Airbreathing Hypersonic Research Program at NASA Ames Research Center. A main theme will be the "From Computation Through Flight" research effort. General research areas covered will include systems analysis, aerodynamics and aerothermodynamics, propulsion, materials, and flight research. Illustrative results from each discipline will be presented. The synergism between computational and experimental research will be demonstrated by examples. All examples given will have been published in the open literature.

Green, Michael J.↗
NASA NTRS1984

The flight planning - flight management connection

Airborne flight management systems are currently being implemented to minimize direct operating costs when flying over a fixed route between a given city pair. Inherent in the design of these systems is that the horizontal flight path and wind and temperature models be defined and input into the airborne computer before flight. The wind/temperature model and horizontal path are products of the flight planning process. Flight planning consists of generating 3-D reference trajectories through a forecast wind field subject to certain ATC and transport operator constraints. The interrelationships between flight management and flight planning are reviewed, and the steps taken during the flight planning process are summarized.

Sorensen, J. A.↗
NASA NTRS1994

Further development and flight test of an autonomous precision landing system using a parafoil

NASA Dryden Flight Research Center and NASA Johnson Space Center are jointly conducting a phased program to determine the feasibility of the autonomous recovery of a spacecraft using a ram-air parafoil system for the final stages of entry from space to a precision landing. The feasibility is being studied using a flight model of a spacecraft in the generic shape of a flattened biconic that weighs approximately 120 lb and is flown under a commercially available ram-air parafoil. Key components of the vehicle include the global positioning system (GPS) guidance for navigation, a flight control computer, an electronic compass, a yaw rate gyro, and an onboard data recorder. A flight test program is being used to develop and refine the vehicle. The primary flight goal is to demonstrate autonomous flight from an altitude of 3,000 m (10,000 ft) with a lateral offset of 1.6 km (1.0 mi) to a precision soft landing. This paper summarizes the progress to date. Much of the navigation system has been tested, including a heading tracker that was developed using parameter estimation techniques and a complementary filter. The autoland portion of the autopilot is still in development. The feasibility of conducting the flare maneuver without servoactuators was investigated as a means of significantly reducing the servoactuator rate and load requirements.

Murray, James E.↗
NASA NTRS1981

Management of the Galileo attitude and articulation control flight software development

Management concepts are presented for software development for a new technology area, i.e., real-time autonomous, computer-based spacecraft control. Flight computer selection and sizing are done initially to maximize performance within constraints of size, power, and cost. A higher order language is chosen to enhance productivity. Because the computer is embedded in the control systems hardware and is tied to the iterative design process of the spacecraft, the management and configuration control of the software is different from more typical applications. The development process must permit early coding but accept late changes. Margin management must be a continuing process in the development. Validation and verification is a special problem because it is not feasible to test the software in the actual operating environment prior to launch.

Pace, G. D.↗
NASA NTRS1973

Adaptive systems research in the NASA

The past contributions of NASA to adaptive control technology are reviewed. The review places emphasis on aircraft applications although spacecraft and launch vehicle control applications are included. Particular emphasis is given to the adaptive control system used in the X-15 research aircraft. Problem areas that limited the realizable performance of this adaptive system are discussed. Current technological capabilities are used to extrapolate the present-day potential for adaptive flight control. Specifically, the potential created by use of the modern high-speed digital computer in flight control is discussed. Present plans for research in digital adaptive control systems for the NASA F8-C digital fly-by-wire program are presented. These plans are currently envisioned to include research in at least two types of adaptive controls, the system identification/on-line design type, and the model reference type.

Montgomery, R.↗
NASA NTRS1994

A comparison of paper and computer procedures in a Shuttle flight environment

The Electronic Procedures Experiment (EPROC) was flown as part of the Human Factors Assessment (HFA) experiment aboard the SpaceHab-1/STS-57 mission. EPROC is concerned with future, longer-duration missions which will increasingly rely on electronic procedures since they are more easily launched, updated in-flight, and offer automatic or on-request capabilities not available with paper. A computer-based task simulating a Space Station Propulsion System task was completed by one crewmember. The crewmember performed the task once using paper and once using computer procedures. A soldering and desoldering task was performed by another crewmember. Soldering was completed with paper procedures and desoldering was completed using computer procedures. Objective data was collected during each task session from the computer programs, videotapes, and crew notations in the paper and computer procedures. After each task session, subjective data was collected through the use of a computer-based questionnaire program. Resultant recommendations will be made available to future designers of electronic procedures systems for manned-space missions and other related uses.

Michael O'Neal↗
NASA NTRS1996

Design and Integration of an Actuated Nose Strake Control System

Aircraft flight characteristics at high angles of attack can be improved by controlling vortices shed from the nose. These characteristics have been investigated with the integration of the actuated nose strakes for enhanced rolling (ANSER) control system into the NASA F-18 High Alpha Research Vehicle. Several hardware and software systems were developed to enable performance of the research goals. A strake interface box was developed to perform actuator control and failure detection outside the flight control computer. A three-mode ANSER control law was developed and installed in the Research Flight Control System. The thrust-vectoring mode does not command the strakes. The strakes and thrust-vectoring mode uses a combination of thrust vectoring and strakes for lateral- directional control, and strake mode uses strakes only for lateral-directional control. The system was integrated and tested in the Dryden Flight Research Center (DFRC) simulation for testing before installation in the aircraft. Performance of the ANSER system was monitored in real time during the 89-flight ANSER flight test program in the DFRC Mission Control Center. One discrepancy resulted in a set of research data not being obtained. The experiment was otherwise considered a success with the majority of the research objectives being met.

Flick, Bradley C.↗
NASA NTRS2004

Neptune Aerocapture Systems Analysis

A Neptune Aerocapture Systems Analysis is completed to determine the feasibility, benefit and risk of an aeroshell aerocapture system for Neptune and to identify technology gaps and technology performance goals. The high fidelity systems analysis is completed by a five center NASA team and includes the following disciplines and analyses: science; mission design; aeroshell configuration screening and definition; interplanetary navigation analyses; atmosphere modeling; computational fluid dynamics for aerodynamic performance and database definition; initial stability analyses; guidance development; atmospheric flight simulation; computational fluid dynamics and radiation analyses for aeroheating environment definition; thermal protection system design, concepts and sizing; mass properties; structures; spacecraft design and packaging; and mass sensitivities. Results show that aerocapture can deliver 1.4 times more mass to Neptune orbit than an all-propulsive system for the same launch vehicle. In addition aerocapture results in a 3-4 year reduction in trip time compared to all-propulsive systems. Aerocapture is feasible and performance is adequate for the Neptune aerocapture mission. Monte Carlo simulation results show 100% successful capture for all cases including conservative assumptions on atmosphere and navigation. Enabling technologies for this mission include TPS manufacturing; and aerothermodynamic methods and validation for determining coupled 3-D convection, radiation and ablation aeroheating rates and loads, and the effects on surface recession.

Lockwood, Mary Kae↗
NASA NTRS2003

Flight Tests of a Ministick Controller in an F/A-18 Airplane

In March of 1999, five pilots performed flight tests to evaluate the handling qualities of an F/A-18 research airplane equipped with a small-displacement center stick (ministick) controller that had been developed for the JAS 39 Gripen airplane (a fighter/attack/ reconnaissance airplane used by the Swedish air force). For these tests, the ministick was installed in the aft cockpit (see figure) and production support flight control computers (PSFCCs) were used as interfaces between the controller hardware and the standard F/A-18 flight-control laws. The primary objective of the flight tests was to assess any changes in handling qualities of the F/A-18 airplane attributable to the mechanical characteristics of the ministick. The secondary objective was to demonstrate the capability of the PSFCCs to support flight-test experiments.

Stoliker, Patrick C.↗